Used Post Reamers for sale (2,861)

Condition: used, Year of construction: 2009, Palletiser Kolbus PL 771 Year: 2009 Description: - Automatic setting - Colour monitor with touch screen - Infeed conveyor Dkjdpfx Acsxg Nzhj Noh - Turning device - Stacking robot - Air table - Pallet dispenser - Slip sheet feeder - Pallet delivery station Technical specifications: - Infeed speed: up to 30 piles/min - Stack size max.: 563 x 406 x 350 mm - Stack size min.: 150 x 100 x 25 mm - Pallet size max.: 1.340 x 1.000 mm - Pallet size min.: 1.000 x 800 mm - Loading size min.: 900 x 700 mm - Palletizing height max.: 1.600 mm incl. pallet - Loading capacity max.: 1.500 kg/pallet

Condition: used, Year of construction: 2011, Three knife trimmer Wohlenberg Trim-Tec 45i Year: 2011 Inline three knife trimmer with integrated counter stacker for production lines in lower and medium speed range. Description: - Digital display - Right hand infeed - Automatic hopper feeder for inline production - Exchangeable cutting tables (standard set) - Knife pre-setting device - Set of knife holders: 2 - Sets of knives: 2 (without waste removal conveyor) Maximum size: 300 x 380 mm Minimum size: 100 x 145 mm Max. mechanical speed: Up to 45 cycles/min. = 2.700/h single copies Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer! Dksdpfx Ajwpfv Aoc Nsh

Condition: used, Used PET Bottle Recycling Line. Approximately 2,000 kg/hour (4,400 lbs/hour) input, producing about 1,700–2,000 kg/hour (3,750–4,400 lbs/hour) of clean PET flakes depending on feedstock quality and operating conditions. The line was built in 2011-2012. Originally designed for processing post-consumer PET bottles into clean PET flakes. Includes bale breaking, bottle sorting, size reduction, hot and cold washing, polymer separation, flake sorting, and bagging. Main Equipment Includes: Infeed conveyor Bale breaker Metering screw conveyors Star screen classifier Vibrating chute (2) Sesotec optical bottle sorters (4) Collecting conveyors Cutting mill (Model KSM 800-1530) Friction washers Hot washers with recirculation systems Dedpfoyhc S Rsx Ac Njkh Sink-float separation stage Post washer and recirculation system (2) Double-stage air separators Sesotec optical flake sorter (9) Filling stations Electrical control system Steel structures and piping More information is available on request.

Condition: used, Year of construction: 2004, Three knife trimmer Kolbus HD 142.P Year 2004 Dedswnbv Aepfx Ac Nekh Description: - Co-Pilot with touchscreen - Semi automatic setting - Right hand infeed - Counter stacker - Exchangeable cutting tables (standard set) - Knife pre-setting device - Set of knife holders: 2 - Sets of knives: 2 Kolbus: HD 142.P Maximum size (cutted): 305 x 420 x 80 mm (WxHxT) Minimum size (cutted): 100 x 100 x 2 mm (WxHxT) Maximum size (uncutted): 310 x 430 x 80 mm (WxHxT) Maximum pile height: 80 mm Max. mechanical speed: 3.900 cuts/h Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: good (used), Year of construction: 2004, It has a lifting and lateral moving function and four side clamping jaws, with a rotary table Manufacturer : AGROMAT Kft - Machine type: BEF-15 Dkedpsir Uh Dsfx Ac Noh - Weight capacity: 1500 kg - Overall size: 4000 x 1800 x 3700 mm - accomadate sizes: 1200 x 800 x 700 mm - range of movement of clamping jaws: 150 mm - lifting height: 700 mm

Condition: used, Year of construction: 2000, machine/vehicle number: SO126, Used HDPE Extrusion Blow Molding Machine for 10 L – 300 bph – Overview Second-hand Uniloy Milacron HSM10/D extrusion blow molding machine designed for producing up to 10 L HDPE containers. With a single-parison head and robust clamp, this EBM unit is ideal for industrial packaging and beverage production auxiliaries (e.g., water canisters, edible oils) and can be integrated within a used bottling line. Documentation and manuals are available. Reference number: SO126. Technical Specifications & Performance Data Main data Make/Model: Uniloy Milacron HSM10/D Year: 2000 Technology: Extrusion Blow Molding (EBM), single parison Material: HDPE Number of cavities: 1 Max container volume: 10 L Indicative output: up to about 300 bph on 10 L (application-dependent) Manuals: included Ref. no.: SO126 Extruder Screw diameter: 100 mm; L/D 24 HDPE screw speed: 0–70 rpm Plasticizing capacity (HDPE): approx. 300 kg/h Main extruder motor: 89 kW Heating zones: 6; barrel heating power: 31.4 kW Motor cooling power: 0.58 kW; barrel cooling power: 1 kW Parison head Type: PE 1/200, single parison Max die diameter: 200 mm Head heating power: 14.2 kW Parison thickness control: hydraulic (wall-thickness programming) Clamp & blow unit Clamp force: 200 kN Max mould size: 650 × 500 mm (H) Mould thickness: 2 × 150 mm Mould opening stroke: 300 mm Horizontal carriage stroke: 660 mm Dkjdsyhbt Hjpfx Ac Nsh Blow pin stroke: 240 ± 5 mm Blow pin thrust at 50 bar: 320 kg Electrical Installed power: 156 kW (average consumption ~104 kW) Supply: 400 V, 50 Hz, 318 A, 3 + N Hydraulic system Reservoir capacity: 400 l Pump flow (1470 rpm): 123 l/min Max pressure (main circuit): 190 bar Main hydraulic motor: 37 kW; oil cooling motor: 1.5 kW Pneumatics Operating pressure (general): 6–8 bar; air use: 2000–2500 Nl/min Post-cooling pressure: 6–8 bar; air use: 1000–1500 Nl/min Cooling water Mould circuit: 8–12 °C; flow 15 m³/h Extruder & hydraulic oil: 10–24 °C; flow 4 m³/h Dimensions & weights Approx. machine size (L × W × H): 7600 × 7700 × 3900 mm Blow unit weight: 7600 kg; Extrusion group weight: 6400 kg Noise level at operator: < 85 dB(A) Advanced Automation & Control Systems Hydraulic wall-thickness programming for precise parison control, improving weight distribution and top-load performance on 10 L containers. Dedicated Uniloy command and control software (version code available in manuals) with operator interface for setpoint management and diagnostics. Integrated temperature control across six extruder zones and heated head for stable processing at up to 300 °C transformation temperature. Interlocked guarding and emergency stops for safe operation. Production Line Integration Capabilities This second-hand extrusion blow molder is integration-ready for downstream equipment typical of a used bottling line and industrial packaging systems: Conveyor...

Condition: good (used), Code: 0465 Brand: IDM - SCM GROUP Model: IDIMATIC 49-20 Automatic edge bander for the application of edges in wood, pvc, veneer, melamine, abs for furniture, furnishings, kitchens, bathrooms, doors, panels and various Technical data: Min/max gluing height mm 10/50 Min/max edge thickness mm 0,4/20 Min panel width mm 60 Min panel length mm 140 Adjustable feed speed m/min 12/18 Electric press lift Telescopic support for large panels Soundproof cabin Composition: Anti-adhesion unit: spreads anti-adhesive liquid on the upper and lower surfaces of the panel Dedpfx Acjvhc E Hj Nskh Gluing unit with pre-melting unit Pressure rollers End trimmer unit for front and rear vertical cutting of excess edging - N° 2 motors 0,5 Kw at 12000 rpm - Tool diameter mm 110 Top/bottom trimmer unit with superimposed motors for trimming the upper and lower sides of the excess edge band - N° 2 motors 0,5 Kw at 12000 rpm Top/bottom trimmer and beveller unit for final upper and lower trimming of excess edge band - N° 2 motors 0,5 Kw at 12000 rpm Manual turret device - automatic positioning of the tool post and front copiers according to the different edge band thickness Routing unit makes through holes and non-through holes in the edged side and on the upper and lower parts of the panel and is time controlled Cleaning unit for brushing and polishing of the edge bands applied - N° 2 motors 0,18 Kw at 1400 rpm which can be inclined vertically between 0° and 30° Compressed air 7-8 bar Overall dimensions mm 5600 x 1000 x 1500 h Weight kg 2500

Year of construction: 1999, condition: used, End sheet tipping machine Dkedpfjx Eblpox Ac Neh Hunkeler VEA 520 KS - HHS Year: 1999 Description: - Offline production - Photocell protection - Cold glue: HHS C-210 (nozzle) - Hotmelt - Premelter: Robatech Concept 4/2 - Inserting - End sheet tipping - Pressing station - Delivery Max. mechanical speed: up to 8.400 cycles/h Outside gluing max. size: 520 x 310 mm Outside gluing min. size: 100 x 70 mm Inside gluing (inserting) max. size: 360 x 260 mm

Condition: used, Horizon MC-80a | 3x MC-80m | Spare Parts | Partial Function Djdpfx Aox A T Taec Nekh

Condition: good (used), EBA 721-06 LT Paper Cutting Guillotine The machine has been serviced and is ready for operation. This professional cutter is designed for high-performance cutting. This model offers excellent value for money. The guillotine, with a 721 mm knife length, is equipped with infrared safety curtains, a hydraulic pressure device, and an electromechanical cutter bar drive. Standard equipment also includes a programmable timer and electronic saddle position readout with an accuracy of 1/10 mm. The machine’s main work table is made of stainless steel with a blower. Technical data: Cutting length 721 mm Infeed height 78-80 mm Infeed depth 720 mm Dksdpfx Aoyg D U Dsc Noh Power supply 400 V Weight 620 kg Key features: Electromechanical knife drive, Hydraulic clamp, Fully adjustable cutting force (250-2000 kg), Optical cutting line indicator, Air table (on front and rear tables), Pedal for pre-marking the cutting line using the clamp or optical cutting indicator, Solid, adjustable steel knife carrier, Blade made of high-quality HSS steel. Safety features include: „Safety curtain” – a photocell in the front table, Transparent safety cover on the rear table, Safe drive – IDEAL patent, Electronically controlled two-handed cutting start, Automatic knife return from any position, Main switch equipped with a key switch. Key-operated Knife replacement possible with the blade permanently covered The set includes: a safety knife change tool, operating tools, a paper tapping tool, and a spare knife.

Condition: good (used), Polar Mohr N78 Plus Paper Cutting Guillotine Machine after inspection, ready to work. Like new. Year of production 2016. Technical data: Cutting width 780mm Stack height 120mm 21.5″ LCD display 400V power supply Weight 1400kg Enlarged side tables. Chrome table surface Table backlight and optical cutting line Dodjyg D Uqepfx Ac Nokh Smoothly adjustable pressure force Additional covers for the rear table. Spare knife, sticks, tapping block, operating tools.

Condition: good (used), Robopac Pack 6050A Shrink Tunnel with Sealer Semi-automatic shrink wrapping machine. Made in Italy. Year of manufacture: 2019. The machine is in very good condition, ready for production. Used in virtually every industry: printing, cosmetics, confectionery – wherever you want to elegantly package your goods. Semi-automatic operation: simply insert the product into the packaging and the machine does the rest. Machine parameters are set from the control panel. Sealing dimensions: 600x500mm Maximum height: 240mm Weight: 450kg Power supply: 380V Dkjdpfoyg D Uksx Ac Nsh Installed power: 7.4kW Capacity: approx. 900 pcs/h Includes take-up rollers.

Condition: good (used), Horizon PF P-330 Folding Machine with Base The machine is in very good condition and 100% functional. This folding machine is ideal for digital printing. Quick and easy to set up – automatic cassette adjustments and paper size detection. A huge advantage is the vacuum feed – a compressor is included. The machine handles all types of paper perfectly. Made in Japan. Technical specifications: Minimum format: 125 x 130 mm Maximum format: 310 x 432 mm Paper weight: 40 to 180 g/m² Infeed stack height: 50 mm Six folding options: half-fold, quarter-fold, Z-fold, C-fold, altar-fold, etc. Dedpfx Asyg D Udjc Nekh Folding speed: 200 sheets/min per hour, 12,000 sheets/h Dimensions: 1060 x 553 x 670 mm Weight: 45 kg Power supply: 230V The machine includes: an external compressor in a sound-absorbing enclosure, an instruction manual, and a large-format accessory.

Condition: good (used), MBO T500F Folding Machine Machine in very good condition, ready to work. Minimum paper size: 105 x 150 mm Maximum paper size: 520 x 720 mm Dksdpfx Aoyg D T Tec Noh High stack feeding 4 cassettes with micro-adjustment and cutting Casket and compressor noise reduction Electronic counter with batching Electric delivery Machine in very good condition, ready to work.

Condition: good (used), Horizon BQ-270C Perfect Binder Machine in very good condition. Ready to use. Very low mileage. Manufacturer’s description: Professional binder for perfect paperback binding. This fully automatic binder features an exceptionally sturdy design and is equipped with a hot glue gun, making it effective even for small and very small quantities of book covers or pages. The Horizon BQ-270C is a single-jaw binder with automatic cover feeding, which, operated by a single person, delivers impeccably bound books of consistently high quality. Equipped with a core thickness scanner, it allows for on-demand binding. Binds books with a thickness of 0.5 to 50 mm and a spine length of 135 to 320 mm, with a maximum production rate of up to 500 books per hour. Dodpfsyg D T Hox Ac Nskh Factory-installed cutter with additional scoring knives. Maximum milling depth up to 3 mm. Automatic cover feeding via a suction drum with a secure, consistent alignment with the bound sheets. A factory-installed system creates 4-fold creases on the cover, which automatically adjusts for precise alignment.

Condition: good (used), FKS PrintBind KB 2000S Perfect Binder 100% functional and ready to use. Manufactured by FKS Hamburg, Germany. Capable of binding books, brochures, pads, prescriptions, etc. A very handy machine, ideal for digital printing. The machine has a convenient base and a built-in compressor. Technical specifications: Maximum format: 320 x 310 mm Spine thickness: 60 mm Capacity: approx. 320 books/h Weight: 186 kg Dkedpfx Ajyg D Tyec Neh 230V power supply Material detection sensors Automatic cover detection and automatic cover clamp Spine milling Simple operation via LCD panel Adjustable cover clamping force Infinitely variable glue thickness adjustment Includes user manual and compressor.

Condition: good (used), Heidelberg Eurobind 500 Perfect Binder Machine in very good condition, low mileage, ready for operation. From a state-owned printing house. Manufacturer’s description: Professional binder for perfect paperback binding. This fully automatic binder features an exceptionally sturdy design and is equipped with a hot glue gun, making it effective even for small and very small quantities of booklets or pages. The Heidelberg Eurobind 500 is a single-jaw binder with automatic cover feeding, which, operated by a single person, delivers impeccably bound books of consistently high quality. It binds books with a thickness of 2 to 50 mm and a spine length of 120 to 320 mm, with a maximum output of up to 500 books per hour. Integrated milling cutter Dksdpfxeyg D Tts Ac Njh Automatic cover feeding and creasing. The set includes documentation, waste extraction, a compressor, and an electric book delivery system.

Condition: good (used), Toppy Advance Mobile pile turner The machine is in very good condition, fully functional, and ready for operation. Manufactured in 2011. Technical specifications: Format: 720 x 1040 mm Dkodpfx Aceyg D Tgo Nsh Stack height: 1320 mm Load capacity: 1000 kg Device weight: 950 kg Low mileage, only 539 hours. Includes a built-in battery charger. Control panel, fast operation, hydraulic drive. Quiet operation. Compact design, small footprint.

Year of construction: 2009, condition: excellent (used), machine/vehicle number: 104/1656, Size 60 x 75 cm, only for turning (without airing), with fixed control desk Dkodpfxjhqhcie Ac Noh Machine nr: 104/1656

Condition: good (used), Cyklos GPM 450SA Semi-Automatic Creaser Dodpfx Acoyg D Ahe Nokh Machine in very good condition, ready for production. Description: Working width up to 450 mm. Programmer with the ability to save up to 15 creasing/perforation positions. Sheet is fed manually and then automatically retrieved. Easy-to-use control panel with program storage. Sturdy metal construction. Creasing or perforation across the width of the sheet (creasing tool included). Creasing of digital prints and laminated sheets is possible. 4 different creasing widths are standard. Large work table.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, very few operating hours very good condition Consisting of: Quickbinder perfect binder with PUR with remote diagnostics with cooling and drying section with three-knife trimmer - System DGR D09 with compressor Base machine for standalone or inline operation for linking with a three-knife trimmer Equipment: - rotary cover feeder with integrated vacuum technology Winjector R - creasing station with split creasing tools for two and four grooves - cover alignment and pressing station incl. 1 set of standard press bars - lifting unit with gripper system for lightweight products - stack delivery (upright delivery) - industrial PC with TFT color display and touch-screen functionality - graphical user interface Navigator E - motorized thickness adjustment * Mobile PUR spine gluing unit – Europe for the production of perfect bound brochures with 1 application roller with heated spinner with automatic doctor blade control with specially coated glue tank with integrated PUR drum melter Dkjdpfx Aceimquce Njh * Cooling and drying section * Hotmelt side gluing unit mounted on the spine gluing unit * Three-knife trimmer D09 – System DGR Base machine for three-side trimming of perfect bound products in offline or inline operation -Offline or inline operation possible * Compressor unit 1800 dm³/min.

Condition: ready for operation (used), Contains: Dkodpfsrqf Sxox Ac Njh - additional folding unit T500-2-500/4

Condition: new, Year of construction: 2021, functionality: fully functional, coupling box 935 for CoBo-Stack M1-Control - CoBo-Stack Dksdjgvmb Eepfx Ac Njh

Condition: good (used), mileage: 324,233 km, power: 84 kW (114.21 HP), first registration: 05/2019, fuel type: diesel, tire size: 235/65R16, axle configuration: 4x2, wheelbase: 4,330 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, total length: 7,230 mm, total width: 2,020 mm, total height: 2,640 mm, loading space length: 4,360 mm, loading space width: 1,780 mm, loading space height: 1,920 mm, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, electric window regulation, power mirror, traction control, = Additional Options and Accessories = - None = Remarks = Configuration: 4x2, Payload: 1,273 kg, Curb weight: 2,227 kg, Gross vehicle weight: 3,500 kg, Unbraked towing capacity: 750 kg, Braked central axle towing capacity: 2,000 kg, Cab type: Single cab, Air conditioning, Number of airbags: 1, Parking assist: None, Electric windows, Electric mirrors, Radio/Cassette, Color: White, Maintenance manual, Reversing camera, Lighting type: Halogen lamp, Air-conditioning, Bluetooth, Engine power: 84 kW (113 hp), Fuel: Diesel, Euro standard: 6, Drive technology: Timing chain, Transmission type: Automatic, Power steering, ABS, ASR, Starter battery, Body type: Extended, Sidewall paneling, Rear step, Roof rack: None, Side doors: 1, Rear closure: Double doors, Central locking, Number of seats: 2, Seat configuration: 1+1, Seat material: Fabric, Seat adjustment: Manual, MAXI, L3H2, air conditioning, POST NL, camera, side bars, Tire type: Winter tires = Further Information = General Information Number of doors: 1 License plate: V-731-XV Axle configuration Tire size: 235/65R16 Brakes: Disc brakes Suspension: Leaf springs Axle 1: Left tire tread: 5 mm; Right tire tread: 7 mm Axle 2: Left tire tread: 5 mm; Right tire tread: 6 mm Weights Kerb weight: 2,227 kg Payload: 1,273 kg gross vehicle weight: 3,500 kg Functional Loading floor height: 62 cm Maintenance APK (Vehicle Inspection): valid until 05/2026 Condition Technical condition: good Visual condition: good Damages: none Dkjdpfx Acsyg Dyge Neh Number of keys: 2

Condition: ready for operation (used), Year of construction: 2003, spindle speed (max.): 18,000 rpm, number of axes: 4, This 4-axis HOMAG PROFI BAZ20/30/16/V/D was manufactured in 2003. It features a Homatic CNC control, WOODWOP CNC programming, an 18-position disk changer, and a main spindle with a 12 kW three-phase motor. Capable of handling workpieces up to 3000 mm in length and 1400 mm in width, it includes a continuous table with adjustable vacuum clamps. Consider the opportunity to buy this HOMAG PROFI BAZ20/30/16/V/D CNC Wood Machining Centre. Contact us for more information. • Control/Software: Homatic CNC control; WOODWOP CNC programming system; Postprocessor • Workpiece capacity: • Length 800–3000 mm; Width 350–1400 mm; Thickness max. 70 mm with edge / 80 mm milling • Frieze width min. 120 mm; Weight max. 150 kg • Table/Clamping: • Continuous table (D-table) • Longitudinal console 1 fixed; Longitudinal console 2 manual Y-width adjustment • 8 vacuum clamps 125 x 50 x 100 mm • Working height lower edge of workpiece 950 mm • Unit for moving vacuum clamps on unit carrier with pneumatic extension console (max. 4 clamps per longitudinal console) • Width adjustment (longitudinal console/D-table): Servo drive, per longitudinal console • Stop bolt for top layer overhang: Lifting/rotating device, max. 20 mm top layer, stroke 110 mm, individually selectable, end-position monitored (for manual door placement) • Main spindle: • Speed 1500–18000 rpm (VFD 15 kW), full rated power from 12000 rpm • Tool diameter max. 180 mm (milling) / 200 mm (grinding); Room extraction for all tools/units • Aggregate interface/C-axis: • Pneumatic and swivel drive interface • C-axis with torque drive and 3-point support • Tool changer: • 18-position disk changer for HSK F63; tool weight 6 kg; tool length max. 200 mm • Configurations: 18 x Ø max. 130 mm; or 9 x Ø max. 180 mm + 9 x Ø max. 70 mm; grinding tools Ø max. 200 mm • Changer raisable for traveling pickup (left side) • Units/aggregates (for tool changer unless noted): • Drilling/milling unit, 4 spindles: ER25 up to Ø16 mm shank, protrusion max. 50 mm, speed max. 13500 rpm, unlimited swivel via C-axis • Lock case milling unit, 2 spindles D=16/20: counter-rotating, 12000 rpm, integrated blow-out, unlimited swivel via C-axis • Swiveling saw/drill unit: manual 0–90°, flange Ø30 mm, TK Ø52 mm, prepared for crosscut saw Ø max. 180 mm, drill chuck with Weldon D=10 mm, speed max. 9000 rpm, C-axis swivel • Milling cutter holder D=30 with chip guide: mandrel length 45/80 mm, chip guide plate controlled via C-axis, changer space Ø 140 mm • Flush milling unit: simultaneous top/bottom, edge radius max. R12 mm, min. outer radius ~R5 mm / inner radius ~R30 mm at 90°, scanning top/bottom/side, unlimited C-axis swivel, speed max. 12000 rpm, workpiece thickness max. 50 mm, min. overhang ~35 mm, with narrow feeler shoes • WPL knife head: run-out angle 5°, Ø 70 mm Dsdpfx Asx D Ribec Nskh • Gluing/edgebanding equipment: • Drive spindle/V for gluing units: mounted right side of boom; cross slide with Y anti-reb and Z extension stroke; anti-reb spindle with C-axis and electrical/electronic interface; dedicated Z-axis • Gluing unit 4 sides, 90 mm (for main spindle): straight edges with direct glue application; 1 pre-press roller + 1 pneumatic post-press roller (programmable); inner radius min. R40 at 90°; edge height max. 90 mm; veneer thickness 0.4–1 mm; folding pressure zone on main spindle with hot-melt reactivation • Edge hold-down device, manual adjustment • Magazine/pickup: • Pickup space on X-support for interchangeable special unit (e.g.