Used Portable Yard Saw for sale (7,228)

Condition: new, SCM gabbiani p90 panel dividing saw - exhibition machine - special price! Technical data: Saw blade projection mm 90 Worktable height mm 950 Number of collets 5 as standard CUTTING DIMENSIONS mm 3300 x 3200 Variable saw carriage speed m/min 6 - 60 Variable pusher speed m/min 0 - 60 Saw blade motor power kW 7.0 Speed rpm 4650 Saw blade diameter mm 340 Saw shaft diameter of main saw blade mm 80 Scoring motor power kW 1.5 Speed rpm 5850 Scoring blade diameter mm 200 Scoring blade shaft diameter mm 80 Compressed air requirement NL/min 300 Compressed air bar 7.0 Extraction air requirement m3/h 2440 Extraction air speed m/sec 20 Suction nozzle diameter mm 4x120 including the following options: 590134 Cutting depth 3200 mm (version 33) OF0263 eye-M control panel with integrated PC 590261 Cut editor OF0454 Maestro pattern 590271 Maestro connect: preparation without "gateway" for subsequent installation OF0457 Human-machine interface software (HMI) MAESTRO ACTIVE Nlsdpeiz A Amefx Affsk 590258 Rear table with castors, on the side of the longitudinal stop 590246 Fixed air cushion table 2500x800 mm with castors and reinforced fan 590239 2 x movable air cushion table 1500x600 mm with castors and reinforced fan 590244 Saw carriage with independent stroke control of the saw and scoring saw blade 590245 Optimized vertical stroke of the saw blade on 2 levels (medium/maximum) 590143 Device for grooves with manual height adjustment of the saw blade 590241 Execution of grooves (feed/return of the saw carriage) 590164 Double lateral automatic aligner 301230 Foot switch for starting and stopping the work cycle 590044 Compact labeling unit - printing of labels with barcode 590144 4 x additional clamps 900088 Magnetic tape monitoring of the pusher position 102015 European safety regulations (CE mark) 109993 MACHINE LANGUAGE: German

Condition: used, functionality: fully functional, Panel saw sliding carriage 3000 mm scorer Nljdpfx Afew U T D Rjfek tilting saw blade

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 561, cutting length (max.): 3,100 mm, cutting height (max.): 95 mm, cutting width (max.): 3,100 mm, feed rate X-axis: 100 m/min, saw drive: 11 W, warranty duration: 12 months, Equipment: scorer, HOLZ-HER Pressure Beam Saw Tectra 6120 power, year of manufacture 2025, delivery ex works - 1 angular air-cushion table 1800 x 600 mm with 1800 mm stop rail - 2 air-cushion support tables 1800 x 600 mm - 3 feed rollers at the front - 3 double-finger floating workpiece clamps - 4 floating workpiece clamps - Sliding door on the left - Automatic cut length limitation - Pro-Lock quick-change clamping system - Optibase Plus optimization software for office use - Uninterruptible Power Supply (UPS) - Automatic central lubrication - Label printer and software - Hand-held remote control unit - Width stop positioning speed 25 m/min, return speed 100 m/min - Saw carriage feed speed 0–100 m/min, return speed 130 m/min - Scoring motor 2.2 kW Nedpox Nqrvsfx Affjlk - Maximum saw blade projection: 95 mm - Motorized groove height adjustment 0–30 mm - Delivery time: immediately available

Condition: excellent (used), Martin T60 Panel Saw 3-axis scoring unit, 330 cm sliding table, Motorized tilt and height adjustment, Nsdpox Npyfofx Affjlk Motorized rip fence, max 125 cm, Blade max 400 mm, min 250 mm, 3 spindle speeds, Angle gauge included, Digital displays on rip fence and sliding table, Branded, very good condition machine.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1000x1500x1800 mm Weight 570 kg Total power requirement 3 kw Nodpfx Ajv A Hgdeffolk

Condition: excellent (used), Catalogue number: 7853 TECHNICAL DATA - Max. diameter of main saw blade without scorer: 400mm - Max. diameter of main saw blade with scorer: 350mm - Main blade adjustment (height/tilt): electric - Arbor diameter: 30mm - Arbor lock - Sliding table included - Side carriage + angle stop included - Sliding table length: 3000mm - Cutting width at rip fence: 1350mm - Side carriage included - Scoring unit included - Max. scorer blade diameter: 120mm - Scoring motor power: 0.75kW - Main motor power: 6kW - Motor for height adjustment: 0.25kW - Motor for tilt adjustment: 0.25kW - Three spindle speeds: 3500/4500/6000 rpm - Table dimensions: 1220x650mm - Table extension: 1920x1450mm - Large blade guard - Extraction port diameters: 80mm, 125mm - Machine dimensions (LxWxH): 3500x3460x1500mm - Weight: 1000kg Nlsdpfx Afsx H S Tisfsk ADVANTAGES – Manufactured in Poland – Equipped with scoring unit – DTR documentation + CE certificate – Used saw, in very good condition Net price: 23,900 PLN Net price: 5,690 EUR (according to 4.2 EUR exchange rate) (Prices may change with significant currency fluctuations)

Condition: reconditioned (used), Veneer saw / fine-cutting saw Consoles for rear support table Nledpfx Afev D I Uxjfsk Pneumatic pressure beam control Extraction channel Cutting length 3050 mm Cutting height approx. 50 mm Motor power 2.2 kW 400 V, 50 Hz Saw blade diameter approx. 180 mm Dimensions approx. L x W x H = 3800 x 1000 x 1200 mm Note on used machines: • Errors in technical information and prior sale reserved. • Prices stated are pick-up prices from location - free loading! • The machines have been cleaned and function-tested. • All machines are purchased as seen without any claim to warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only answer inquiries if you provide your address + telephone number!)

Condition: excellent (used), Year of construction: 1998, total length: 7,150 mm, total width: 2,550 mm, total height: 2,670 mm, UBH Universal Bulk Handling 31,345L, 20FT tank container / swap body, bottom discharge, steam heating, insulated, 5-year inspection / CSC valid until: 04-2028 = Further Information = Nedpfx Afjxvyc Isfslk General Information Year of manufacture: Dec. 1998 Model year: 1998 Weights Unladen weight: 4,250 kg Payload: 31,750 kg Gross weight: 36,000 kg Functional Load compartment dimensions: 715 x 255 x 267 cm Load compartment capacity: 31,122 l Superstructure brand: UBH Universal Bulk Handling Number of chambers: 1 Condition Technical condition: very good Visual condition: very good Further information Please contact Arne Honingh for more information.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, saw blade diameter: 600 mm, Power supply: 400 V Blade diameter: Ø 600 mm Machine weight: 1820 kg Year of manufacture: 2006 Nodpfx Aex Nnd Aeffslk Type: CT 600 Motor power: 7.5 kW Serial number: 260856 Infeed pusher dimensions: 10,300 × 2,000 × 1,250 mm Outfeed conveyor dimensions: 6,300 × 800 × 1,120 mm Outfeed table dimensions: 5,000 × 1,250 × 910 mm Rotational speed: approx. 2600 rpm Table rotation range: max. ±70° Cutting height: approx. 200 mm (at 0°) Max. cutting width: approx. 410 mm Minimum workpiece size: 20 × 10 mm Positioning accuracy: ±0.4 mm Cycle time: approx. 4 seconds per cut Working height: 1000 mm Chip extraction connections: Ø 100 mm Beckhoff control with 12-inch touchscreen (Windows interface), 3D element visualization, cutting list import via USB/Ethernet.

Condition: excellent (used), Altendorf F45 prodrive panel saw 300 cm sliding table, Blade tilt and height are motorized and adjustable, Right-side rip fence motorized adjustable up to 1340 mm, 2-axis scoring unit, electrically adjustable, 5.5 kW vario motor, speed controlled by frequency inverter, Nedpox Npvtsfx Affslk Max. blade diameter 450 mm, Used machine in very good condition.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 9000x1400x1680 mm Weight 1600 kg Total power requirement 7,5 kw Njdov A E Ndspfx Affelk - Max process length 2.5 m (Can be customzied)- Max process width 200 mm -Min process width 30 mm- Max process thickness 1O0 mm (Can be customzied)- Saw blade 405/120/30/3 , 455/120/30/3 mm- Spindle motor 7.5 KW / 400 V- Machine size 9000 mm x 1400 mm x 1680 mm- Machine weight 1600 kg

Condition: excellent (used), Year of construction: 1993, Panel saw Manufacturer: Striebig Model: Standard 2 6220A Year of manufacture: 1993 Nsdpfsx Nmtpjx Affelk Cutting length: 530 cm Cutting height: 220 cm Cutting depth: 80 mm Motor power: 4.4 kW Saw blade diameter: 300 mm Speed: 4,750 rpm

Condition: excellent (used), Year of construction: 2019, Motor power 1.5 kW Saw blade speed 2800 rpm Saw blade DM 250 mm Saw blade bore 30 mm Cutting length 400 mm (with 20 mm workpiece thickness) Cutting length at 45 degrees 230 mm Cutting depth 65 mm Swivel locking of the arm +/- 45 degrees Weight 140 kg Motor protection switch Brake motor Emergency stop switch CE including dust collection hood for extraction connection DM 120 mm Note for used machines: - Subject to errors in technical specifications and prior sale. Nedpfxsulzchj Affelk - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: excellent (used), Year of construction: 1999, total length: 6,060 mm, total width: 2,440 mm, total height: 2,590 mm, WELFIT ODDY 20FT ISO Tank Container 24,890L UN PORTABLE T11 Bottom Discharge Steam Heating NEW 5Y- & CSC inspection valid until 04/2028 = Additional Information = General Information Year of manufacture: Aug. 1999 Model year: 1999 Suitable for: Chemicals, construction water, fuel, waste water Weights Tare weight: 3,900 kg Payload: 32,100 kg Gross weight: 36,000 kg Functional Tank capacity: 24,690 l Body make: Van Hool 24,690L TC, 2 compartments (12,290L/12,400L), L4BN, IMO1, T11 Number of compartments: 2 Condition Technical condition: very good Optical condition: very good Nljdpfx Afjxuiaasfek Additional information Please contact Arne Honingh for further information.

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, roller feeder length - 6050 mm belt receiver length - 6100 mm saw blade diameter - 500 mm model: R500 Nodpfx Afox Nnbzofelk loading with motor-driven roller conveyors power supply: 380 V

Year of construction: 2004, condition: reconditioned (used), Walter double saw with TRKS 200 feeder double saw blade cutting height 200 mm, engine power 40 kW, Nlsdpoh R Tvtofx Affok chain feeder with drivers with adjustable prism for different diameters. Gear to regulate the speed of feeding the material.

Condition: used, Year of construction: 2023, DOUBLE GLASS BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLASS BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double miter saw for the simultaneous cutting of two glass beads positioned one above the other. The right saw unit is fixed, adjustment of the left unit is via the set cutting length can be read off a digital display. The units have supports that allow two glass beads to be cut simultaneously. The upper support can be removed for cutting larger cross-sections. After the cutting process is completed, the pneumatic clamping cylinders automatically swing to the side to simplify loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital dimension display • Pressure switch • 2 HM-tipped saw blades • Electrical system with motor brake, undervoltage release, motor protection switch • Pressure switch • Tool set • Guards with horizontal clamping devices, pivoting • Two-hand control • Belt drive • Pneumatic unit lift • Middle support TECHNICAL DATA • Motor power 2 x 1.2 kW • Saw blade diameter Ø 220 mm • Max. cutting height without support 80 mm • Max. cutting width at 90 degrees 55 mm • Max. cutting width at 45 degrees 40 mm • Max. cutting length 2800 mm (optional 4000 mm) • Min. cutting length 158 mm • Weight 217 kg • Space requirement (standard equipment) 3000 x 850 mm Extended cutting capacity 1 pc Maximum cutting length • 4000 mm Star stop 4 positions 1 pc set 2 mechanical stops for adjusting up to 4 intermediate angles. Additional center support. 1 adjustment for rebated profiles. 1 adjustment for rebated profiles as per drawing: - Attachment to the clamping devices to compensate for the profile inclination - Allowances on the rear stops of the units and the center support. The sketch below shows (in green) a beveled presser that follows the inclined profile and presses it against the allowance on the stop (shown in red). Nledjxnlgcjpfx Affok Storage location: Garbsen

Condition: good (used), Year of construction: 1994, Panel saw Manufacturer: Striebig Model: TRK 3 5220A Nedpjxwb Sgsfx Affelk Year of manufacture: 1994 Cutting length: 430 cm Cutting height: 220 cm Cutting depth: 80 mm Power: 4.4 kW Saw blade diameter: 300 mm Speed: 4,750 rpm

Condition: excellent (used), Multirip saw Max. Cutting width 310 mm Chain width 340 mm Max. Passage width / input width 650 mm Max. Cutting height with Quickfix clamping flange 110 mm Saw shaft diameter 65 mm Min. timber length 500 mm Max. Feed speed 35 m/min, variable Motor power 22.0 kW, 400 V, 50 Hz Feed motor 1.3 kW, 400 V, 50 Hz Saw blade diameter min./max. 300/ 350 mm Working height 850 mm Extraction diameter 250 mm Required extraction volume 5300 m3/h Quickfix saw blade attachment Electric height adjustment of the saw shaft Electric height adjustment of the pressure unit Dimensions approx. L x W x H = 1750 x 1750 x 1500 mm Weight 1850 kg Nlodpfxotwy Iue Affok Incl options: Oil level monitoring SafetyPlus Quickfix Note for used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: used, Year of construction: 2007, Small panel saw Behringer LPS 60 T, year 2007, available from early 2026. Nodpfx Afex H Ruljfslk

Condition: good (used), Veneer saw, veneer sawing machine, jointing cutting machine, fine cutting machine, fine cutting circular saw -Cutting length: 3000 mm -with extraction Nlsdpfx Aeb A Hnhjffjk

Condition: excellent (used), Year of construction: 1999, cutting length 3.200 mm cutting width 3.200 mm Nsdpfohvan Iex Affolk cutting hight 65 mm saw blade DM max. 300 mm saw blade motor: 5,5 kW scoring unit DM max. 160 mm motor scoring unit 1,5 kW front support tables 3 Stk. 1 x 2500 x 500 & 2 x 1500 x 500 mm cutting optimisation program no. of grippers 8 pcs saw blade hight adjustment on THK guides pressure beam with openings side pusher (alignment) saw blade quick change system suction DM1 x 120 & 1 x 150 mm space requirement L x B 5700 x 6000 mm weight approx. 2500 kg INVERTER NEW Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: good (used), Pipe saw, pipe jigsaw, support jigsaw, reciprocating saw, handsaw, jigsaw -Nominal power input: 750 W Nlodpfx Ajb A I Tuoffjk -Stroke length: 60 mm -Max. material thickness -Pipes up to: max. Ø 300 mm -various saw blades -Weight: 5 kg

Condition: new, Thin layer from 2 mm thickness Maximum cutting accuracy up to ± 0.15 mm Minimal kerf, cutting thickness from 1.3 mm Ideal for the cutting of dried and wet wood or alternative materials Surface of the thin layer ready for gluing without need of further processing steps Friendly user electronic control Two programmable speeds of the carpet (0-30 m/min) for the best cutting quality and to safeguard the blade life Optical sensor to start cutting cycle and speed change Ground table “Flexam” belt feeding for the best performance 6 rubber idler rollers adjustable in height, for opening/closing to ensure the best pneumatic pressure on the workpiece during feeding and cutting Oleo-pneumatic tensioning of the blade for better cutting performance Top and bottom ‘’Chaco’’ blade-guides which guarantee the best stability blade during cutting Internal/external lubrication of the blade to remove residues of resins and chips 4 dust extraction to optimize the suction of dust and chips Cutting height of 400 mm (500 mm optional) Cutting width up to 400 mm High quality powerful motor kW 15 (HP 20) Ethernet connection for on line service Carbide or stellite blades for best cutting performance DM of saw wheels mm 800 Max. cutting height mm 400 fixed working table mm 1290 x 800 Max. saw blade width mm 54 x 0,9 Max. & min. saw blade length mm 5530 / 5380 motor Kw 15 (HP 20) suction connection nr 2x Ø 120 & 1 x Ø 100 compressed air requirement bar 6/ 27 ltd machine weight Kg 880 Nedodcd Dlepfx Affslk feed speed m/min 0 - 30 height of feeder belt mm 300 length of feeder mm 750 feeder roller DM mm 160 Max. feeder opening mm 200 Max. fence opening mm 200 feeder speed var. mt/ min 0-30

Condition: reconditioned (used), reinforced gray cast iron table, tiltable balanced cast iron wheels precise upper & lower blade guide Work table dimensions approx. 680 x 580 mm Cast iron wheel diameter 600 mm Max. cutting height 340 mm Max. cutting width approx. 540 mm Three-phase motor approx. 2.2 kW, 50 Hz, 400 V Nledpjv Dg A Usfx Affjk