Used Pneumatic Bandfeeder for sale (6,747)

Condition: used, Year of construction: 2005, pressure 30 t Stroke 190 mm distance between columns 440 mm Giodpeyfwvrefx Ahvjp side window 450 mm daylight (max. stroke up, adjustment up) 350 mm table surface area 595x450 / 440x595 mm table height over floor 725 - 900 mm table adjustment range 175 mm ram surface 90 mm power requirement 0,5 kW Weight 1,20 kg dimensions (WxDxH) 1,5 x 1,0 x 2,9 m SPECIAL DEAL as is where is, WITHOUT additional work free loaded to truck Basic unit power pack K 30.181-190.10 with stroke limitation, anti-rotation protection, universal underframe UUM 1-200.031, adjustable working height Total stroke 190 mm / power stroke 10 mm

Year of construction: 2015, condition: used, functionality: fully functional, The pneumatic butt welding device, type Sv‑63P, is equipped with a robust vertical frame that includes vertical clamping jaws and a sliding movable plate. Clamping is achieved via tandem cylinders, while the support plate on the static side is isolated from the base frame, which also carries the movable carriages. These carriages are connected to a horizontal cylinder for compressing the workpiece. The carriage movement is limited in both directions—both for compressing and opening—while the distance between the clamping jaws can be adjusted according to the cross-section or diameter of the workpiece. Clamping with the set jaw distance is controlled using foot switches. An additional control cabinet with switches and push-buttons allows for single or simultaneous clamping and supports both manual and automatic welding operations. After welding, the clamping jaws lift, and the carriages return to their initial positions. The welding parameters are set using a controller mounted on the side of the device. The welding voltage is regulated by thyristors, and the power transformer is fully encapsulated and water-cooled, connected to the contact jaws via laminated conductors. Inside the device, a power board with a thyristor and a main control board ensure smooth operation. On the device cover, a compressed air maintenance unit with a pressure regulator is installed to adjust the clamping force. The main switch to activate the unit is located on the controller for setting the welding parameters. Giedpoyqr Sxjfx Ahvsp

Condition: good (used), Year of construction: 2022, I sell the automatic pneumatic end cutting saw Salvamac Salvapush 2000, year 2022. Input table automatic feeding 6,10m (pusher system) Outut table 3,00m Total length: 10,50m Optimising with mistakes deffect reading and automatic cutting sequence modes. Gjdpfx Ahsvxbmweveip Available immediately. CE version. Documentation included.

Year of construction: 2026, condition: new, Our machine is a one-head pneumatic oscillating blade cutting table designed for efficient processing of a wide variety of materials. EVA XPE EPP PE LEATHER HONEYCOMB CARDBOARD General Information Giodpsytcv Tefx Ahvsp Machine dimensions: 3310 x 1750 x 1370 mm Maximum panel size: 1300 x 2400 x 100 mm Maximum board size: 1300 x 2400 x 100 mm Total installed power: 11 kW Cutting heads: 1 Maximum cutting speed: 700 mm/sec Maximum cutting thickness: 100 mm Oscillating blade, creasing wheel

Condition: good (used), functionality: fully functional, Type DZ 4 Press force at 6 bar 4 t Press force at 12 bar 8 t Table size W x D approx. 280 x 280 mm Installation height 350 mm Throat depth 160 mm Gedpjyr Siasfx Ahveip

Condition: used, Pneumatic punching unit TÜNKERS or DE-STA-CO, pneumatic power cylinder Pneumatic punching frame, punching frame, punching unit, punching frame Year of manufacture: 2019 Model No. 141-1040F Punching frame No. B-13-26/100 Punching force: 4 tons (40 kN at 8 bar) Air connection max. 8 bar Throat depth: 100 mm Frame width: 60 mm Hole diameter: Ø 2-13 mm Hole diameter (installed punch): Ø 4 mm Die diameter (outside): Ø 22 mm - Stripper with Vulkollan polyurethane elastomer Dimensions (L x W x H): 280 x 110 x 480 mm Giodpexf Uqxsfx Ahvsp Weight: 36 kg very good condition

Condition: not inspected (used), Year of construction: 1995, functionality: unexamined, pressing force: 4 t, table width: 245 mm, table length: 360 mm, stroke length: 50 mm, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS Max. stroke: 50 mm Max. pressing force: 4 t Table dimensions: approx. 360 x 245 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 800 x 700 x 1800 mm Machine weight: 600 kg EQUIPMENT On base frame Gijdeyn Hncopfx Ahvsp External reference: Groven - Lot 5

Condition: not inspected (used), functionality: unexamined, table width: 200 mm, table length: 300 mm, No minimum price – guaranteed sale to the highest bidder! Bidding constitutes a binding obligation to collect the item on time, either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS Table dimensions: 300 x 200 mm MACHINE DETAILS Gjdeyn Hcmjpfx Ahvoip Dimensions & weight Dimensions (L x W x H): 500 x 500 x 1400 mm Machine weight: 200 kg External reference: Groven – Lot 1

Condition: excellent (used), functionality: fully functional, CATALOG NUMBER 7558 TECHNICAL DATA - Loading areas: 2 - Side clamps, manually adjustable: 2x4 pcs - Vertical pneumatic clamps: 2x4 pcs - Max length of glued elements: 3300 mm - Max height of glued elements: 1020 mm - Max thickness of glued elements: 100 mm - Dimensions (L/W/H): 4270x1600x2000 mm - Weight: approx. 800 kg ADVANTAGES – Two working zones – Gluing length: 3300 mm Gijdpfx Asyarabohvjp – Pneumatic cylinders – Used press, very good condition Net price: 10,900 PLN Net price: 2,600 EUR based on exchange rate 4.2 EUR (Prices may vary depending on significant fluctuations)

Condition: excellent (used), Year of construction: 2013, AMADA MODEL GS 11 840 8 mm x 4050 HYDRAULIC year 2013 PROGRAMMABLE CNC SHEAR STAINLESS STEEL CAPACITY 6mm ALUMINIUM CAPACITY 10 mm CUTTING LENGTH 4050MM POWER BACK GAUGE 1000MM PNEUMATIC SHEET SUPPORTS SIDE GUAGE 1.5 METRE Gsdpfxjyr H U Dj Ahveip SERIAL NUMBER HOLD DOWN HYDRAULIC BLADE GAP ADJUSTMENT STANDARD VARIABLE RAKE STANDARD SHADOW LINE LIGHT STANDARD CENTRALISED LUBRICATION STANDARD SHADOW LINE LIGHT STANDARD STROKE COUNTER STANDARD ADJUSTABLE STROKE STANDARD MOTOR 16 KW WEIGHT 11650KG

Condition: used, Year of construction: 1999, cutting height (max.): 210 mm, cutting width (max.): 460 mm, PNEUMATIC ADJUSTABLE CHAINSAW: Brand: STROMAB Type (Model): PS 600/P Serial No.: 990460 Year: 1999 Godpfx Aorx Tatshvoip MAKING CAPACITIES: - Maximum wood cross-section: 210 x 460 mm (thickness x width) - Adjustable arm (pivot): -45 to +40° - Cutting capacity pivoted at 45°: 210 x 325 mm max FEATURES: - CE marked - Pneumatic front arm feed - Lockable disconnect switch, push-button stops - Main power supply: 380V Three-phase 50 Hz - Saw motor power: 7.5 kW (10 hp) IN 16.5 A - Blade speed: 2800 rpm - Saw blade: Ø 590-600 mm Bore: Ø 30 mm, Ø 4.2 mm thick - Table height (working height): 880 mm - Main wooden table: 1100 x 710 mm, with 2 pneumatic pressure gauges - Pneumatic power supply: 6 bar Estimated consumption: 28 nl - Extraction inlet: Ø 150 mm Recommended flow rate: 1350 m3/h, 20 m² Dimensions: 1700 x 1500 x h. 1900 mm Weight: 630 kg Please contact us for the supply of consumables, accessories, and/or extraction systems. Machine offered without any special servicing required

Condition: used, There are 7 pneumatic pickers available for sale. The units were self-built by the customer. Gsdeyrl Rdspfx Ahvsip

Condition: new, Year of construction: 2026, Pneumatic double diaphragm pump Cobra 40 -10 Its unique design allows low pulsation operation Uniform ink flow for perfect spray and highest surface quality Ideal for processing shear and moisture sensitive materials Minimal shear forces - ideal for processing e.g. UV varnishes Ideal for processing small quantities of material and for frequent colour changes Scope of delivery: Basic unit on stand, HD double hose 7,5m, upper container 5l Ex, AirCoat gun AC 4600 Professional including red air cap and holder, Air Coat nozzle ACF 3000 11/40 Giedpfsbuqn Hsx Ahvjp Technical data: Conversion ratio: 40:1 Volume flow per double stroke: 10 cm3 Flow rate at 200 double strokes: 2 l/min max. Operating pressure: 250 bar Weight: 23 kg Location: 54634 Bitburg At a special price - immediately available

Condition: used, Description For sale is a set of SCHUNK pneumatic 2-jaw power clamping blocks (centrically clamping) including manual/control valve (as shown) and an extensive set of top/clamping jaws (various designs, incl. prism/V-jaws). Ideal for fixture construction, series production, and flexible setups. Gjdpfjyp Iflex Ahvoip 2 units available Price quoted: net/unit Collection in 57439 Attendorn. Shipping possible.

Condition: used, Electro Dual Screwdriving Unit with Automatic Feed and Pneumatic Double Stroke BÖLLHOFF Type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E dual screwdriving unit is equipped with a pneumatic double stroke, operated via Festo valves and cylinders. Additionally, various monitoring systems are installed for full automation. Technical data: Torque of electric screwdriver: 0.6 Nm Gearbox torque: max. 10 Nm Speed: max. 20,000 rpm Rated voltage: 3~ 0-230 VAC Current consumption: max. 7 A (per screwdriver) Pneumatic long-stroke cylinder: 80 mm Pneumatic short-stroke cylinder: 20 mm Total pneumatic stroke: 100 mm Spring stroke for screwdriver: 20 mm Distance between both screwdriving tools: 73 mm - Equipped with a TORX bit T27 or TP27 (presumably for M6 screws) - Requires Bosch Rexroth LT303 power module for operation (power module not included) Screwdrivers 1 and 2 are each composed of the following components: Rexroth type servo motor Rexroth type 0 planetary gearbox Rexroth type 0 encoder Rexroth type 0 straight drive output Component details: Electric screwdriver unit Rexroth Servo motor Rexroth Type: EC302 SZ3 Material number: 0 Torque: 0.6 Nm Peak torque: 0.7 Nm Speed: max. 20,000 rpm Current consumption: max. 7 A Rated voltage: 3~ 0-230 VAC Weight: 0.8 kg Gearbox unit Rexroth Type: 3GE27 SZ3 Material no.: 0 Efficiency: 90% Gear ratio: i=18.9 Torque: max. 10 Nm Weight: 0.4 kg Installation length: 65.5 mm Gjdpfx Ahjhxvu Eevoip Encoder Rexroth Type: 2DMC012 SZ2 Material no.: 0 Nominal torque: 12 Nm Reduction ratio: 1 Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Straight drive output Rexroth Type: 2GA82 SZ2 1/4" SQ Material no.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Max. torque: 10 Nm Reduction ratio: 1 Weight: 0.2 kg Installation length: 90 mm One 7 m motor connection cable is included in the delivery. Overall dimensions W x H x D: approx. 180 x 920 x 300 mm Total weight: approx. 20 kg Good condition

Condition: used, Electric dual screwdriver unit with automatic feed and pneumatic double stroke, mounted on handling device, handling system, manipulator for screwdriving technology. Screwdriving Unit: BÖLLHOFF / BOSCH REXROTH Type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E dual screwdriver unit features a pneumatic double stroke via Festo valves and cylinders. Various monitoring systems are installed to enable full automation. Screwdriver 1 consists of the following components: - Rexroth type servomotor - Rexroth type 0 planetary gearbox - Rexroth type 0 encoder - Rexroth type 0 straight drive head Screwdriver 2 consists of the following components: - Rexroth type servomotor - Rexroth type 0 planetary gearbox - Rexroth type 0 encoder - Rexroth type 0 offset drive head Dimensions (WxHxD): 165 x 1000 x 200 mm Pneumatic long stroke: 30 mm Pneumatic short stroke: 20 mm Screwdriver spring travel: 20 mm Last screws used: M6 x 15 mm Electric screwdriver unit Rexroth Servomotor Rexroth Type: EC302 SZ3 Material number: 0 Torque: 0.6 Nm/A Peak torque: 0.7 Nm Speed: max. 20,000 rpm Current draw: max. 7 A Weight: 0.8 kg Gearbox unit Rexroth Type: 3GE27 SZ3 Material No.: 0 Efficiency: 90% Reduction ratio: i=18.9 Max. torque: 10 Nm Weight: 0.4 kg Installation length: 65.5 mm Encoder Rexroth Type: 2DMC012 SZ2 Material No.: 0 Nominal torque: 12 Nm Reduction: 1 Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Straight drive head Rexroth Type: 2GA82 SZ2 1/4"SQ Material No.: 0 Gjdpfx Asfx Hyfohvsip Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Max. torque: 10 Nm Reduction: 1 Weight: 0.2 kg Installation length: 90 mm Offset drive head Rexroth Type: 2VNA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Max. torque: 10 Nm Reduction: 1 Weight: 0.6 kg Installation length: 153 mm Handling system: JÄGER HANDLING Type: Handy-flex 300 Horizontal movement: 400 mm Vertical movement: 450 mm Load capacity: max. 14 kg Handyflex reach: 250 to 650 mm Handyflex reach (swung out): max. 860 mm Swivel radius at full extension: max. 360° Guide column vertical: Ø 30 mm Guide columns horizontal: Ø 20 mm - Balancer for vertical movement - Adjustable load capacity - Adjustable stop for limiting swivel radius Dimensions (L x W x H): approx. 1150 x 650 x 1400 mm Total weight: approx. 90 kg Good condition Without the blue steel pallet as base plate Blue steel base plate is not included in the scope of delivery.

Condition: used, Air operated double diaphragm pump DEPA Type DH40-FA-ZRT Air operated diaphragm pump, double pump Serial No.: B1802498 Year of manufacture 09.05.2018 Temperature: max. 130°C Size: 40 Grain size: max. 16 mm Suction height: approx. 2 m Suction height product filled: approx. 9 m Operating pressure: max. 7 bar air connection: 3/8" suction connection: 1 1/2" Gjdpfx Ahjib D H Usvsip pressure connection: 1 1/2" - self-priming - aluminum housing - Diaphragm plate made of stainless steel - Diaphragm made of nopped E4® PTFE compound - Balls made of PTFE - Ball seats made of stainless steel Space requirement: L x W x H: 370 x 270 x 450 mm own weight: 15 kg very good condition

Condition: used, Pneumatic press, compressed air press BOSCH type Manufacturer no.: Year of manufacture: 1980 Pressing force: 18 kN = 1.8 t at 5 bar 15 kN = 1.5 t at 4 bar 12 kN = 1.2 t at 3 bar 8 kN = 0.8 t at 2 bar 6 kN = 0.6 t at 1.8 bar Throat depth: 100 mm Godpfxjh U Dtuj Ahvsip Ram stroke: 70 mm Table size: 245 x 200 mm Ram face: Ø 45 mm Max. installation height: 235 mm Clamping pin bore: Ø 20 mm with clamping screw Compressed air requirement: 5 bar - Pressing force infinitely adjustable via pressure regulator - Pneumatic cylinder with ram adjustable in height by 90 mm - Pneumatic dual-hand control - Mounted on a metal frame with wooden boards Required floor space (L x W x H): 1050 x 700 x 1600 mm Weight of pneumatic press: 82 kg Weight including table frame: 140 kg In very good condition

Condition: used, Pneumatic folding and edging machine FASTI Type 606 - 11 - 1.0 Folding machine for pre-forming sheet metal seams For producing a seam bend Seam bending machine for thin sheet metal as an alternative to a press brake Serial no.: 9166002 Year of manufacture: 1991 Working length: 1100 mm Material thickness at 45 kg/mm²: 1 mm Compressed air requirement: 6 bar - pneumatic foot switch - roller adjustment via threaded clamping screws Required space (L x W x H): 1600 x 300 x 1050 mm Weight: approx. 250 kg Good condition Gedpfx Ahodzqblsveip The seam is the doubling over of the sheet metal edge (1x folded over) to increase the stiffness of the sheet. By folding over, a rounded edge is created, reducing the risk of injury from sharp sheet edges. Ideal for metalworking applications such as sheet metal furniture, cladding panels, or for the production of ventilation and silencer components.

Condition: used, Pneumatic screwdriver, pneumatic screwdriver DESOUTTER Pneumatic screwdriver, straight screwdriver for screwdriving technology Type SD 140-AR510-S4Q Torque range: 0.6-14.0 Nm Speed: max. 510 rpm Compressed air requirement: 6 bar Air consumption: 8.7 l/s Bit holder: M6 - Rotary switch for clockwise and counterclockwise rotation (rotary ring control) - Without screwdriver switch-off - Compressed air control line Ø 4 mm - Compressed air connection for screwdriver function min. Ø 10 mm Gijdpfx Asfgrrhehvjp - Aluminum holder for handling device - Screw feed Ø 12 mm (inner diameter) Dimensions L x W x H 60 x 46 x 870 mm Weight: 2.8 kg good condition 4 pieces available, price per screwdriver

Condition: used, Clinching unit TOX - Pneumatic-Hydro Toxpress Hydro-pneumatic press TOX Pressotechnik KRAFT PAKET Type CRS 03.62 No.: 207599.2 Year of construction approx. 2005 Pressure capacity: max. 80 kN = 8 tons Projection: 20 mm Installation height: 32 mm - Built-in clinching tool - Pneumatic valve for control - Push-through joining or clinching - For creating a form-fit connection between 2 sheets without piercing or heating the sheets - Mounted on the stand - with simple electrical control and foot switch Own weight: 230 kg Gijdpfxsdz Sqqo Ahvop Comes from a production plant, sold without electrical control

Condition: used, pressure at min. stroke 3 t throat 150 mm stroke - 39 mm distance table/ram, max. stroke up, adjustment up 200 mm table surface area 280 x 380 mm pressure at min. stroke 1,5 t no. of strokes with min. stroke - 80 /min no. of strokes with max. stroke - 50 /min hole in the table 45 mm Gisdpsylcmiefx Ahvjp table height over floor 790 mm ram surface 115 x 100 mm Required air-pressure 4 bar weight 0,2 t Dimensions (WxDxH) 0,5 x 0,9 x 1,4 m SPECIAL DEAL as is where is WITHOUT putting into operation / WITHOUT additional work as spare part dispenser, free loaded to truck pneumatic knuckle-joint press

Condition: used, pressure 5 t throat 150 mm stroke 40 mm no. of strokes 0 - 80 /min distance table/ram, max. stroke up, adjustment up 260 mm table surface area 340 x 270 mm Gijdpfx Ajylcmcohvsp hole in the table 45 mm table height over floor 780 mm table adjustable 120 mm ram surface 60 mm weight 0,3 t dimensions (WxDxH) 0,4 x 0,8 x 1,4 m SPECIAL DEAL as is where is, WITHOUT putting into operation / WITHOUT additional work as spare part dispenser, free loaded to truck pneumatic knuckle-joint press

Condition: used, Manufacture : Volkmann Model : RNT 180 Type: Station for filling and emptying pouches, bags and other packaging. Connection for pneumatic transfer Fine particle extraction system Aspiration : Multi Ejector + Vacuum pump G1800 Pneumatic filter cleaning system Air tank : FESTO CRVZS-2 (capacité 2 L) / Pression max : 16 bar Level probe Opening sensor Side vibrator Gjdpfjyk Invox Ahvsip 100% pneumatic unit 3 filters supplied with the machine

Condition: used, Pneumatic valves from GEA, Alfa Laval, and APV (10 pallets). Approximately 150–170 pieces. Two pallets with Alfa Laval valve control heads. One pallet with unused valves. Gisdpfx Aeyk Hlyshvop