Used Pneumatic Band Feeder for sale (13,060)

Year of construction: 2013, condition: used, cutting diameter 420 mm saw band length 41 x 5600 mm cutting width 1,3 mm Control Simatic S7 Touch band speed 17 - 110 m/min sawing motor 7,5 kW diameter of round bars 420 x 3000 mm diameter of round bars 300 x 6000 mm total power requirement 30 kW weight of the machine ca. 18,5 t dimensions of the machine ca. 12,5 x 5,0 x 2,5 m CNC sawing machine with band saw JAESPA Compact 4S and round steel magazine and discharge gripper for sawing round bars from 50 - 420 mm and 6 pockets with a max. bar weight per pocket of 3400 kg. Cut-off lengths 20 - 1000 mm. As good Cjdpfjd Izmajx Ailogw as new condition, approx. 1,000 working hours.

Condition: new, Year of construction: 2024, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 36AMG, compressed air connection: 6 bar, working width: 360 mm, warranty duration: 12 months, operating speed: 250 mm/s, Komfi Laminator Amiga 36B (Bottom Suction Feeder) New, Manufactured 2024 Specifications: Max. speed of lamination 15 m/min Min. sheet dimensions 20 × 20 cm Max. sheet dimensions 36 × 70 cm Paper weight/Paper thickness 115-350 g/m² / max 0.5 mm (with overlap > 0) / max 1 mm (with overlap < 0) Max. paper pile 6 cm (depending on sheetlenght) Thickness of laminating film 24-50 μm Kind of laminating film OPP, PET, Nylon, PVC Time of laminating roll warm up Approx 3.5 min Sheet overlap accuracy ±1 mm Machine dimensions incl. table 230 × 79 × 152 cm Air supply requirements Min. 6 bar Consumption of compressed air 20 l/min Max. consumption of compressed air 30 l/min Max. pressing force 12.8 kN = 1.3 ton-force Max. linear nip pressure 35,5 N/mm Cgodpfx Aezh N Dloilew Max. consumption of electricity 6 kW Power supply 6 kVA Machine weight 332 kg Recommended machine capacity 100 000 sheets/month Feeder: Bottom Suction Vacuum Feeder Laminating Unit: ”On-the-fly” side-adjustable unwinding shaft with adjustable brake force. Height-adjustable and removable spread roller perfectly removes wrinkles from laminate. IR heating for laminating cylinder. Temperature sensor inside the cylinder for precise regulation. Rubber coated pressure roller. Adjustable distance stoppers for lamination unit to enable processing thick substrates and windows lamination. The powerful pneumatic pressure system guarantees even nip pressure and perfect lamination results. Separator & Delivery: Decurling unit consisting of bar and roller elements to reach flat result also for difficult thin or duplex sheets. Built-in film perforator to enable sheet separation. Cam-driven separation roller with adjustable tearing action, delivery roller and sheet skewing wheel. Fixed delivery desk.

Condition: good (used), Year of construction: 2003, saw band length 2910 x 27 x 0,90 mm Control Kasto CompactControll capacity 90 degrees: round 260 mm capacity 90 degrees: flat 300 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 200 mm capacity 60 degrees: round 165 mm cutting speed 20-110 m/min min. dia. 10 mm Cutting Length min. 6 mm total power requirement 2,5 kW weight of the machine ca. 0,86 t dimensions of the machine ca. 1,8 x 1,8 x 1,7 m Fully automatic band saw (CNC) Includes right-hand roller conveyor with programmable stop carriage & digital display: Stop positioning is handled by the integrated measuring system, with the position shown to millimeter precision on the separate display. Dimensions (L x W x H): 2.70 x 1.10 x 1.70 m. Max. measuring length: 2.30 m. Cedpfx Ajzgxf Njiljgw Includes hydraulic clamping and feed unit Includes coolant system Includes work light Includes small parts and spare parts Includes 2 band saw blades Includes operating manuals

Condition: excellent (used), SCM contura in excellent condition Cgedpet E T I Nsfx Ailow

Condition: used, functionality: fully functional, Working area: approx. 1,250 x 2,100 mm 2 x 1.4 kW unbalanced motors Cgedpfx Aiezgv E Tjljw mounted on a new, robust steel frame.

Condition: used, Year of construction: 1997, total height: 2,400 mm, total length: 1,800 mm, total width: 1,000 mm, Colour: Grey Weight: 750 kg - Year: 1997 - Documentation available: No - CE certificate present: No - Serial number: AS10384 - Saw direction: vertical - Main motor power [kW]: 15.0 Csdezgup Djpfx Ailjgw - Max. cutting to feed roller opening [mm]: 250 - Max. cutting to stop opening [mm]: 300 - Max. cutting height [mm]: 3450 - Table width [mm]: 790 - Table length [mm]: 740 - Max. band saw width [mm]: 70 - Max. band saw length [mm]: 5600 - Feed roller type: Automatic electric - Extraction port diameter [mm]: 150 - Options: Tiltable fence - Voltage [V]: 400 - Transport dimensions: 1800mm x 1000mm x 2400mm (l x w x h) - Transport weight [kg]: 750kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2018, Minimum sawing capacity (90 gr.) 80 x 10 mm Max. sawing capacity (90 gr.) 1100 x 510 mm Max. sawing capacity (45 gr.) 710 x 510 mm Max. sawing capacity (60 gr.) 460 x 510 mm Saw band size 9920 x 54 x 1,6 mm Max. saw band speed 60-170 m/min Cgsdpozh Exrofx Ailow Control: Mitrol Pegaso 3.6.0 Equipped with: Various in/out feed rolls

Condition: used, power: 18.5 kW (25.15 HP), input voltage: 400 V, cutting height (max.): 320 mm, cutting width (max.): 300 mm, total length: 1,000 mm, overall weight: 3,100 kg, table height: 1,250 mm, Slitter-Rewinder equipped with hydraulic drive, self-centering option roller diameter: 915 mm saw width: 100 mm variable speed from 10 to 60 m/min. Codpfx Aiszh Dz Eelogw

Condition: good (used), Year of construction: 2003, for bar diameter 5 - 65 mm Csdpfxjyrgv Ue Ailjgw Feed force: max. 550 N was installed on Index G 200

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Features and technical specifications: Cgedpfx Aeyqanbjiljw - Round pot glue application unit - With second glue application unit for PUR processing - Feed unit with automatic edge band magazine - Pressure zone with multiple pressure rollers - End trimming: 2 motorized saw units for front/end cap cutting - Top/bottom milling units: 2 milling units with tracing wheels for radius or chamfering - Radius scraper blade: pneumatically operated, post-processing of radii - Surface scraper blade: for smoothing the edge surfaces - Polishing unit: 2 polishing wheels with motors for final finishing - Riepe spray device - Control: PLC with control panel - Feed frequency inverter replaced by Ott in 2022 - Feed speed approx. 10–12 m/min - Workpiece thickness up to 52 mm - Edge thickness 0.3 – 12 mm - Power supply 3x 400 V AC, 50 Hz - Rated power 12.7 kW - Rated current 30.5 A - Control voltage 24 V DC - Max. fuse protection 35 A (5x 6 mm² connection cable) Machine dimensions: approx. 6120 x 840 x 1385 mm Machine weight: approx. 3,000 kg Availability: short notice Location: Röllbach

Condition: used, Year of construction: 1989, Used machine Compact machine for processing molded parts Processes edge material coated with hot-melt adhesive, which is reactivated by hot air Automatic workpiece feed is achieved by pressing the workpiece against the central, driven pressure roller, ensuring uniform adhesive reactivation and consistent bonding reliability Thermostatic temperature control via analog thermostat Maintenance-free three-phase hot air blower for continuous operation Automatic airflow redirection Pneumatically operated roller separating device cuts even the toughest veneer and PVC edges Foot switch for molded part processing Workpiece thickness: 10 - 50 mm Heating output: 3 kW Connection load: 3.3 kW Minimum workpiece width: approx. 25 mm Edge thickness: approx. 0.5 - 1 mm Minimum internal radius: approx. 25 mm Feed rate: 4 m/min Pneumatic system: 6 bar Weight: approx. 105 kg Cjdpfx Aijwwxykjljgw Availability: short-term Location: Röllbach

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Features and technical data: - Machine completely overhauled: - New Glue Jet 301 glue application system (top part 1 mm) - All units inspected - All milling cutters resharpened - All knives replaced - Feed speed: 10 - 18 m/min - Workpiece length: min. 160 mm - Workpiece width: min. 60 mm Cgedpswka Iisfx Ailow - Workpiece thickness: 8 - 60 mm - Edge thickness: 0.4 - 8 mm - Electrically adjustable feed motor: 400 V / 50 Hz, 2.2 kW - Motorized pressure bridge adjustment - Automatic chain lubrication - PPC 315 control with 15" touchscreen - ECO MODE energy saving function - Infeed fence 1350 mm, motorized adjustment - Jointing unit 1802: - 2 x 2.0 kW, 200 Hz, 12,000 rpm with 2 jointing units for panel edge jointing - Diamond cutter, Ø 70 x 64 x 30 mm, Z2, left rotation for jointing unit - Diamond cutter, Ø 70 x 64 x 30 mm, Z2, right rotation for jointing unit - Edge feeder 1901 fully automatic - Glue application station Glu Jet GJ301 automatic: - 2.3 kW; 50 Hz - Granulate hopper - Pressure unit 1913 MOT - End trimming unit 1918 (60 mm) pneumatic - Multifunctional milling unit 1826 MOT4 (2 x 0.65 kW): - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm left rotation - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm right rotation - Profile milling unit 1833 MOT4: - Cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 Radius R = 2.5 mm, left rotation with CM technology - Cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 Radius R = 2.5 mm, right rotation with CM technology - Scraper unit 1929 MOT2: - Carbide reversible knives for scraper holder R = 2.5 mm (2 pcs. required) - Flat scraper 1964 - Buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm) Availability: short-term Location: 63934 Röllbach

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Edge Control control system with 18.5" touchscreen color monitor 16:9 Cgsdpfx Aisv Sv Enjlsw Swiveling operator panel, Program storage, Motorized pressure bar adjustment, Feed via transport chain, Feed speed: 8-18 m/min Extendable workpiece support, Infeed fence with motorized adjustment Jointing unit 1961, Diamond jointing cutter for climb and counter rotation, Automatic adjustment to workpiece height Edge feed 1903 Pre-trimming up to 3 x 45 mm (depending on material) Glue application system 1905 Multi-System Automatic glue height adjustment with sensor nozzle, Pressure regulator for adjusting the cartridge contact pressure, Use of PUR adhesives possible, Pressure unit 1913 MOT, First roller driven End trimming unit 1918 with pneumatic adjustment End trim saw pneumatically swiveling, Multifunction unit 1824 MOT 4 with multifunction cutter radii 1,2,3 mm Corner copying unit 1832 Corner copying up to 3 mm edge thickness Radius scraper 1929 MOT 2 With motorized adjustment of horizontal tracing rollers With pneumatic adjustment (top and bottom separate) Chip collection box for radius scraper, Surfacing scraper 1964 For removing glue residue for a clean glue line With extraction hoods Spray unit 1856 for infeed and outfeed area Buffing unit 1940 For finishing and edge polishing ----- Technical Data ----- Edge thickness roll material: 3 mm, Edge thickness strip material: 8 mm, Max edge thickness for corner copying: 3 mm, Workpiece thickness: 45 mm, Workpiece thickness for corner copying: 45 mm, Min. workpiece length: 180 mm, Feed speed: 8-18 m/min, Distance workpiece support: 470 mm, Support table diameter for edge material: 800 mm, End cut knife for coiled material up to: 3 mm, Heating time: 3.5 min, Jointing unit power: 2 x 2 kW, End trim saw power: 2 x 0.22 kW, Milling station power: 2 x 0.35 kW, Corner copying power: 0.22 kW, Extraction port jointing unit: 120 mm, Extraction port milling unit: 70 mm, Extraction port scraper unit: 70 mm, Total length: 5,350 mm, Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm Picture of operating hours taken from a recording in 2022 Availability: short term Location: Röllbach

Condition: used, Year of construction: 2003, Used machine Year of manufacture: 2003 Features and technical data: - Control system with LCD display - Swiveling operator panel - Program memory - Manual pressure bridge adjustment - Feed via transport chain - Extendable workpiece support Jointing unit 1961: - 2 x 2.0 kW - Diamond jointing cutters for up-cut and down-cut operation Edge magazine 1903: - Support plate 820 mm, max. loading capacity 40 mm - Automatic feeding of coil and strip material Adhesive application system 1906: - Cartridge system with sensor-controlled nozzle - Automatic reloading - Use of PUR adhesives possible Pressure unit 1816: - With powered roller - Pneumatic control of the pressure unit End trimming unit 1918: - 2 x 0.22 kW - Swivels from 0 to 10°, pneumatically adjustable Milling unit 1942 MOT 2: - For flush, radius, and chamfer milling - Motorized adjustment - Air nozzle at milling unit Corner copying unit 1832: - Corner copying up to r = 3 mm, postforming up to r = 6 mm Radius scraper unit 1929 MOT 2: - For plastic edging up to 3 mm - Chip collection box for radius scraper Surface scraper 1964: - Process-controlled surface scraper - Air nozzle at surface scraper Buffing unit 1940 Edge thickness, coil material: 3 mm Edge thickness, strip material: 5 mm Max. edge thickness, corner copying: 3 mm Workpiece thickness: 6-45 mm Cgodowka Nyepfx Ailow Workpiece thickness, corner copying: 45 mm Min. workpiece length: 180 mm Feed speed: 8 m/min Distance, workpiece support: 470 mm Support plate diameter for edge material: 800 mm End trimming blade for coil material up to: 3 mm Heating up time: 3.5 min Jointing cutter power: 2 x 2 kW End saw power: 2 x 0.22 kW Milling station power: 2 x 0.6 kW Corner copying power: 0.22 kW Extraction nozzle jointing unit: 120 mm Extraction nozzle milling unit: 70 mm Extraction nozzle scraper unit: 70 mm Dimensions: 5,350 x 1,669 x 1,940 mm Weight: 1,200 kg Location: Röllbach Availability: short notice

Condition: used, Year of construction: 1995, Used machine Year of manufacture: 1995 Equipment and technical data: Glue tank with glue roller Pre-cutting knife 4 pressure rollers 2-motor cutting unit Radius milling unit Flush milling unit Radius scraper Edge thickness: 0.2 - 6 mm Workpiece width min.: 70 mm Workpiece height: 8-42 mm Feed speed: 12 m/min. Shipping dimensions: 370x100x125 cm Weight: 1330 kg Location: Röllbach Cgsdpfjwpm Igsx Ailjw Availability: short term

Condition: used, Year of construction: 1996, Used machine Year of manufacture: 1996 with heated infeed rail Gluing station with electronic temperature control and forward/reverse function - Cutting unit - Milling unit Cgodpskwg Tbsfx Ailew - Profiling blade - Cleaning station - Edge thickness 0.4 - 5 mm - Board thickness up to 50 mm - Part length min. 150 mm - Part width min. 60 mm - Workpiece thickness 8 - 50 mm - Feed rate 12 m/min L x W x H approx. 4000 x 1260 x 1600 mm (Width can be reduced to 800 mm for shipping by removing the extendable support) Availability: by arrangement Location: Hochheim

Condition: used, Year of construction: 1990, Used machine Year of manufacture: 1990 Equipment and technical data: - Automatic edge feeding - Cartridge glue system - Pressure unit with 4 rollers - Cross-cut saw unit - Flush trimming unit - Combination trimming unit (flush/chamfer/radius) - Radius scraper - Buffing unit - Edgeband thickness: 0.3 - 20 mm - Maximum edgeband height: 66 mm - Minimum edgeband length: 200 mm - Feed speed: 8/16 or 12/24 m/min Availability: short notice Cgsdpfjyncpvsx Ailjw Storage location: 63934 Röllbach

Condition: used, Used machine Equipment and technical specifications: Automatic edge feeder Cartridge glue system 4-roll printing unit Cross-cut saw unit Flush trimming unit Combination trimming unit: flush/bevel/radius Radius scraper Buffing unit Edge band thickness 0.3 - 20 mm (depending on unit) Edge band height max. 66 mm Edge band length min. 200 mm Feed rate 8/16 or 12/24 m/min With LIGMATECH workpiece return system The return line of this return system is located above the panel processing level. The workpieces move back to the operator on an inclined plane. Special features compared to the ZHR 0x models: Automatic detection and rotation of parts from transverse to longitudinal Automatic adjustment of the rotation speed to the workpiece length Minimum and maximum workpiece dimensions For longitudinal edge processing: 2200 x 1000 For transverse processing with subsequent rotation: 250 x 120/2200 x 800 Maximum workpiece thickness: 60 mm Cgsdpfxsw Nad Hs Ailsw Location: Bavaria Availability: Short-term

Condition: used, Year of construction: 2011, Used machine Year of manufacture: 2011 Condition: Machine completely overhauled and serviced Equipment and technical specifications: Infinitely variable feed speed: 10–18 m/min Edge Control 19 control system with 18.5" touchscreen color display Jointing milling unit Edge feeding Cartridge adhesive application station with sensing nozzle and automatic glue height adjustment Pressure unit End trimming unit Multifunctional milling unit Corner copying unit Radius scraper unit Surface scraper Codpfowka N Tex Ailegw Buffing unit Workpiece thickness: 6–60 mm Edge thickness: 0.4–8 mm Minimum workpiece width: 60 mm Shortest workpiece length: 180 mm Dimensions: 5300 x 1500 x 1600 mm Weight: 2,200 kg Location: 65439 Flörsheim Availability: short notice

Condition: new, Year of construction: 2015, Feed unit Exhibition machine Year of manufacture: 2015 Cjdpfx Aiem Rmf Soljgw 3-roller feed Roller diameter: 120 mm Roller width: 60 mm Roller spring travel: 20 mm Speed Forward and reverse operation: 4-8-11-22 m/min Motor 0.75 kW / 400 V Weight: 28.5 kg Availability: in stock Location: Flörsheim

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Cjdev Huggepfx Ailsgw TECHNICAL DATA Wheel diameter 500 mm Belt speed 1300 m/min Cutting height 330 mm Cutting width 480 mm Blade length max. 4140 mm Saw blade width min. / max. 15 mm / 25 mm Optional, with special coating: saw blade width min. / max. 6 mm / 20 mm Table size 670 x 495 mm Table height 900 mm Dust extraction port 2 x Ø 100 mm Motor power 1.5 kW / 2 HP Special voltage: 400 V / 50 Hz Color RAL 7035 light gray and RAL 5000 violet blue Net weight approx. 210 kg TECHNICAL DESCRIPTION Solid German engineering Machine stand in aesthetically pleasing, modern, torsion-resistant, double-chambered, welded steel construction Upper and lower doors secured via limit switches Upper and lower precision band saw blade guides APA 2, size 1 Finely planed gray cast iron table Tilting table top up to 45° Dynamically balanced band saw wheels with vulcanized rubber tires Fence rail on the left of the saw blade, can be used Fence profile can be folded down Blade tension indicator 1 saw blade 4140 x 20 x 0.45 mm, tooth spacing 6 mm, No. 3783.20K Mechanical height adjustment of the saw blade guard via handwheel with locking ratchet Push-button switch for start/stop with emergency stop button and motor protection relay Wear-free, electric motor brake CE compliant GS tested Machine stand, left-hand version Drive motor 1.5 kW / 2.0 HP Weight approx. 210 kg Availability: short-term Location: Flörsheim

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Compact and flexible in the smallest of spaces. Workpieces receive their finish within a length of just 2.13 m. Equipped with a 1.1 kW high-frequency motor joining unit and diamond-tipped spiral joining cutter, Teflon-coated glue unit, pre-end trimming unit, and HF multifunction milling unit. Two free slots for finishing units, such as a surface scraper and polishing unit. Simple operation via 3.5'' color touchscreen. Technical data Csdpfxoy Eizzo Ailjgw Machine length: 2,122 mm Workpiece thickness: 10–45 mm Minimum workpiece width: approx. 120 mm Edge thickness: 0.4 – 2.0 mm Edge height max.: workpiece height + 4 mm (2+2) Electrical connection: 400 V Total connected load: 3.6 kW Feed speed: 6.5 m/min Pneumatic connection: 6 bar Net weight: approx. 490 kg Options: Surface scraper unit Diamond tools, height = 45 mm Location: Flörsheim Availability: short-term

Condition: new, Feeder Year of manufacture 2022 Csdpfenvkhzex Ailegw max. throat 1050 mm Feed rollers 3 pieces roller diameter 120 mm Roll width 60 mm Rollers spring travel 25 mm Speeds 2/4/5.5/6.7/11/12/15/30 m/min Motor power 0.75 kW/400 V Weight 65 kg Availability: immediately Storage location: Hochheim

Condition: new, Year of construction: 2021, Feeder Year of manufacture 2021 max. throat 1050 mm Feed rollers 3 pieces roller diameter 120 mm Roll width 60 mm Rollers spring travel 25 mm Cgedpfx Ajnvkh Esilsw Speeds 2/4/5.5/6.7/11/12/15/30 m/min Motor power 0.75 kW/400 V Weight 65 kg Availability: immediately Storage location: Hochheim

Condition: new, Year of construction: 2021, Feeder Year of construction 2021 max. throat depth 1050 mm Feed rollers 4 pieces Roller diameter 120 mm Roll width 60 mm Spring travel of the rollers 25 mm Speeds 2/4/5.5/6.7/11/12/15/30 m/min Motor power 0.75 kW/400 V Cgedpfjtmyq Rex Ailow Feed: dimensions LxWxH 750x300x570 mm, weight 33 kg Stand: dimensions 1100x320x300 mm, weight 42 kg Availability: immediately Storage location: Hochheim