Used Plywood Press for sale (12,766)

Condition: like new (used), Heidelberg GTOZ-S52 offset printing machine The machine is ready to work, very good condition, purchased from small printing house. Technical data: Format: 36x52cm 2 printing units Weight: 3000kg Power supply: 400V Year of production: 1994 Knedpsz E A I Asfx Ahbsc Baldwin alcohol dampening Control panel Documentation and additional elements included.

Condition: good (used), Year of construction: 2018, functionality: fully functional, Baling press Presona LP 85 VH2, year of manufacture 2018 Technical data: Manufacturer Presona Sweden Type LP 85 VH2 Year of manufacture 2018 Drive power 2 x 45 kW Operating hours 40,350 Effective operating hours approx. 22,000 Pre-compression force 28 t Main compression force 85 t Infeed chute 1500 x 1100 mm Bale dimensions 750 x 1100 mm Bale weight 450 - 650 kg Theoretical volume output: 1200 cbm/h Throughput at 30-100 kg/cbm: 13-30 t/h Tying 5-strand vertical, (3-strand horizontal) Oil tank volume 2000 L Transport dimensions press 10400 x 2400 x 2800 mm (L x W x H) Weight approx. 27,000 kg Materials: Paper, cardboard, PET bottles, films, light waste. Note: The press is in good condition. It was dismantled from ongoing operation. The horizontal tying is currently not functioning. The technical documentation is available. The following work has been carried out by us: New wear plates (Hardox) in the press channel Seals completely replaced on the main cylinder Oil filter changed Kjdpez H I E Aefx Ahbenc Vertical tying system overhauled and made operational. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is non-binding, subject to prior sale and can be revoked at any time. Inspections are possible by arrangement. The sale is made with advance payment, ex works, without warranty. Our payment terms are 100% advance payment.

Condition: used, Pressure total: 800 ton Ram stroke: 700 mm Slide adjustment: 500 mm Shut height (stroke down, adjustment up): 1350 mm Free frontal opening L-R: 3550 mm Table surface area : 3500 x 2000 mm Slide area: 3500 x 2000 mm Die cushion capacity in table: 150 ton Die cushion stroke: 200 mm Die cushion pad area: 2700 x 1500 mm Number of strokes: 7 - 21 s.p.m. Ejector in ram: 60 ton Ejector stroke in ram: 150 mm Required power: kW Height over floor approx.: 8600 mm Kjdoz Hi Rgopfx Ahbjnc Weight of machine approx.: 250 ton Standard configuration LINK DRIVE

Condition: good (used), Year of construction: 2005, power: 7.5 kW (10.20 HP), pressing force: 120 t, stroke length: 1,000 mm, operating speed: 10 mm/s, reverse speed: 120 mm/s, throat depth: 400 mm, clearance between the columns: 2,550 mm, total length: 5,700 mm, total width: 1,800 mm, total height: 3,100 mm, overall weight: 9,650 kg, Equipment: documentation/manual, Press brake SAFAN - H-Brake 120TS1 MACH-ID 9820 Make: SAFAN Type: H-Brake 120TS1 Control: TS1 YOP: 2005 Max. bending length: 3100mm Distance between column: 2550mm Max. pressing force: 120T Dis. Beam - Table: 470mm Beam stroke: 180mm Troth beam: 400mm Approch speed: 200mm/min. Working speed: 10mm/min. Return speed: 120mm/min. Adjustment X-Axis back gauge:1000mm Number of controlled axis: Y1 / Y2 / X/ Z1 / Z2 / R-Central Control: TS1 Crowning: Yes Hydraulic toolclamping: Yes Power: 7.5kW Length: 5700mm Width: 1800mm Height: 3100mm Weight: 9650kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Kodpoz Hka Ajfx Ahbsnc

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 74300 € 1404.27 € 100 to 4.5 mm 700 mm 1000 mm 210 mm 1 - 132 mm 58 1/min 6 90 mm 60 mm 300 mm 445 mm 7.5 kW 1650 mm 1545 mm Kedpfx Aowiqq Sshbonc 3011 mm 7000 kg Welded steel construction body frame Crankshaft made of AISI 4140 (42CrMo4) alloy steel, CNC grinded for max. precision SnBz-12 quality bronze to bearings, grinded for min surface resistance Ram supported from 8 sides Pneumatic counter-balancing of the ram 7" touchscreen Gears in oil bath Pneumatic clutch-brake combination PLC control for safety Photocell light barriers Motorized slide adjustable Hydraulic overload protection Two hand and foot pedal control Adjustable stroke (inverter) automatic centrallubrication Machine and equipment in conformity with CE-regulations OPTIONS: vibration pads € 192,00 bolster plate € 2.580,00

Condition: defective spare-parts repository (used), Year of construction: 2009, For sale is a defective Trumpf 7036 tube bending machine, manufactured in 2009. The screen remains blue (blue screen error). Kodpfxez Rknpj Ahbonc

Condition: good (used), Year of construction: 2008, pressing force: 160 t, stroke length: 290 mm, overall weight: 11,000 kg, working width: 4,100 mm, distance between side stands: 3,550 mm, Brand: Dener Kodpfswi Sktjx Ahbenc Model: DMP 160/40 Year: 2008 Bending length: 4,100 mm Force: 160 tons 2 axes (Y, X) *Torsion bar machine, Y axis X stop: 650 mm Cylinder stroke: 290 mm Distance between uprights: 3,550 mm NC control: Dener HT062 Neck: 450 mm Motor power: 15 HP Weight: 11,000 kg

Condition: good (used), Code: 0119 Brand: KOLMAG - ITALY Model: PGP 600 F Hydraulic press for moulds, frames, furniture elements, solid wood doors, plastic materials, composite materials and various Press modular structure with heavy thick plates without weldings and worked by tool machine Oleodinamic plant with pistons prefilling system in order to have a quick opening and closing of the platens Dimensions of massive steel platens mm 1600 x 500 - Thickness mm 60 with electric resistances - Max temperature 260°. Kedpewk Ntzofx Ahbjnc N° 3 pistons diameter mm 240 Pressure kg/cm2 56 Thrust Tonn 450 Safety photocells Hydraulic power unit Kw 7,5 Power absorbed heating platens 31 Kw Control board with pressure control gauge - Timer for platens opening - Telethermometer to regulate upper platen temperature - Telethermometer to regulate lower platen temperature - Switches for opening and closing of the platens - Emergency push button Overall dimensions mm 2250 x 1700 x 3300 h Weight kg 9000

Condition: good (used), Code: 0374 Brand: ITALPRESSE Model: V/4 Mechanical cold press for wood, panels, doors, furniture, composite materials, technical materials, plastics, aluminium and various other materials Working dimensions 2200 x 1000 mm Platen dimensions: n° 2 platens 1100 x 1000 mm NEW aluminium sheets Option to work on a single table or on separate tables Opening 650 mm N° 4 pressure screws Kodoy If Rwspfx Ahbjnc N°2 motors 0,75 Hp each Overall dimensions mm 2550 x 1000 x 1650 h Weight kg 870

Condition: used, Year of construction: 2018, controller model: , _____ Description: Year of manuf. : 2018 Control : Technical data Year of manufacture:2018 Pressing force approx.:3200 kN Folding length approx.:4420 mm Control system:TASC 6000 Projection:420 mm Free upright clearance approx.:3680 mm Usable installation height approx.:615 mm Machine weight approx.:23400 kg Equipment :- Sturdy machine frame :- Press beam, stress relieved with high bending strength :- Spherical bearing of the press beam (inclined position) :- Electro-hydraulic top drive with 4-cylinder technology :- Optical set-up and positioning aid :- Generous edge clearance :- Flat front covers :- Block hydraulics :- Electronic pressure compensator :- Measuring system with glass scale and deflection compensation :- Hydraulic oil in the machine (lifetime lubrication) :- Oil cooler :- Control cabinet cooling via air-to-air heat exchanger :- Modern machine design Extended equipment :- 6-axis backgauge system :- Hydraulic upper tool clamping :- CNC crowning :- Work area lighting front and rear BendMaster (150) :- Sturdy base body and manipulator in cast aluminium construction Knedpfx Ahsyy Hgqjbsc :- Load capacity 150 kg, plate plus gripper :- Low floor track in welded construction :- Sheet sensor for contour detection :- Rotary feed-through for easy gripper change :- Gripper coupling on BendMaster :- Sensors for 4-axis backgauge system :- Electric drives :- Double sheet detection :- Regripping station NC :- Vacuum generation for suction gripper :- Platform (300 mm) for the bending press Extended BendMaster equipment :Extended BendMaster equipment - Track extension to 12 m :- Sensor system for 6-axis back gauge :- Gripper changing console :- Vacuum gripper, undefined :- Modular vacuum gripper with separation (material for 3 grippers) :- Gripper coupling :- Tong gripper :- Sheet removal station with linear axis :- Side door on right for safety fence

Condition: refurbished (used), Automatic line for forging / hot stamping Installed after refurbishing in 2015 and having run for not more than 1,000 hours, condition is excellent. ➢ ADIGE CM 500 AUTOMATIC SAW ➢ 50 KW INDUCTION OVEN ➢ ELECTRONIC AUTOMATION SYSTEM ➢ VACCARI SCREW PRESS 180 screw diameter ➢ 10-POINT AUTOMATIC LUBRICATION SYSTEM ➢ BALCONI 50T TRIMMING PRESS ADIGE CM 500 AUTOMATIC SAWING MACHINE WITH 3.5-METER AUTOMATIC BAR LOADER Technical specifications: -Min./max. cutting capacity: 8 mm / 60 mm diameter -Standard cutting speed: ADIGE SALA. -Head motor power: (50 Hz) 2.2 kW -End-of-bar scrap equal to or shorter than the usable piece -Central hydraulic tank capacity: 200 liters -Cutting emulsion tank capacity: 50 liters -Weight: approx. 1,200 kg -Siemens electrical components 50 kW INDUCTION OVEN WITH 1 INDUCTOR (8–20 mm) with ELECTRONIC LOADING ARM For horizontal and vertical loading of work pieces Features a brushless motor, programmable axes, and press interpolation with electric axes; electronic components: Siemens Load capacity: 4 kg; vertical stroke: 80 mm; power supply: Electro-pneumatic VACCARI SCREW PRESS 180 screw diameter Technical specifications: -Screw diameter: 180 mm -Theoretical pressure: 300 tons -Table dimensions: 430 x 550 mm -Slide dimensions: 500 x 650 mm -Ram stroke: 350 mm -Distance between uprights below the guides: 450 mm -Distance between uprights within the guides: 350 mm -Max. height between table and ram: 650 mm -Strokes per minute: 35 -Table height under the guides: 300 mm -Main motor: hp 30 -Machine dimensions: 4100 x 2600 x 2200 mm -Approximate weight: 11,000 kg NEW SIEMENS S7 ELECTRICAL SYSTEM NEW PNEUMATIC SYSTEM NEW LUBRICATION SYSTEM BALCONI 50T TRIMMING PRESS Technical specifications: -Power: 50 tons Kedpfozcdluox Ahbjnc -Table dimensions: 800 x 500 mm -Ram dimensions: 440 x 380 mm -Max. die height: 400 mm -Adjustable stroke: 100 mm -Strokes per minute: 35–100 -Main motor power: 5.5 kW

Condition: new, functionality: fully functional, HOT HYDRAULIC PRESS PCO 3013 NEW MACHINE – V380/50 – “CE” Knsdey Sm S Repfx Ahbec Table dimensions: 3000 x 1300 mm SOLID TABLES MADE OF PERFORATED STEEL Table coating in aluminum Table heating with thermal oil Oil boiler: 27 kW Number of pistons: 6 Ø 100 mm Total pressure: 120 TONS

Condition: good (used), Year of construction: 2015, functionality: fully functional, bending force (max.): 230 t, Bending length [mm] 3230 Press force [tons] 230 Control system TRUMPF TASC 6000 Standard equipment: Machine - Robust machine frame in all-steel construction - Press beam, stress-relieved by annealing - Spherical mounting of the press beam with inclination - Electro-hydraulic upper drive with 4-cylinder technology - Generous bending clearance - Flat front covers - Modern block hydraulics - Electronic pressure gauge Kodpfxsz Rl Nhj Ahbsnc - Measuring system with glass scale and spring compensation - Hydraulic oil in the machine (lifetime lubrication) - Oil cooler - Control cabinet cooling via air-to-air heat exchanger - Modern machine design Back gauge system - Rear back gauge system, 2 axes, X and R axes - 2 back gauge fingers with secure adjustment from the front Tool clamping - Upper tool holder, manual clamping, hardened - Lower tool holder, hydraulic clamping, hardened - Lower tool displacement, 2 positions, pneumatic Crowning - Manual crowning Control system - TRUMPF TASC 6000 - Graphical workshop programming - Windows XPe (embedded), Pentium 4 with 2.8 GHz clock frequency - 2 GB RAM - 15-inch touch screen - Network capable - Teleservice via modem Operation - Control panel with LCD keypad and foot switch - Communication bus Safety - Standard safety devices

Condition: ready for operation (used), Year of construction: 1989, Heidelberg GTOZP 52 - 696xxx serial - 1989 Front panel Alcohol dampening Kjdpfxex Hrn Te Ahbenc 35 mios Perfector documents + tools

Condition: ready for operation (used), Year of construction: 1999, SM 74-5P2 L, 1999 year Fully rebuild and renewed by heidelberg 2012. All auto washes autoplate Temperating rollers technotrans 198 mil imoressions. Knedpfx Ajyi Uxxshboc

Condition: ready for operation (used), Year of construction: 1983, BOBST SPO 1600 Max Speed 5000 per hour Year 1983 Max lenght 1075mm Max width 1580mm Fully reconditioned by Bobst 2015 Central line Knjdsxcayyjpfx Ahboc

Condition: good (used), Year of construction: 1991, functionality: fully functional, power: 11 kW (14.96 HP), pressing force: 125 t, stroke length: 180 mm, throat depth: 300 mm, clearance between the columns: 2,600 mm, total length: 3,200 mm, total width: 1,700 mm, total height: 2,250 mm, overall weight: 7,400 kg, Press brake, bending length 3100 mm, capacity 125 to, control DELEM 58, gap between column 26000 mm, stroke 180 mm, throat gap 300 mm, motor 11 KW, back gauge, dimension 3200x1700x2250 mm, weigth ca. 7400 kgs, 2 frontarms, foot pedal, serveral tools Ksdpfsz Rqlnsx Ahbjnc

Condition: excellent (used), Eccentric press Inventory No. 3687 Manufacturer: Ter Hart Ksdpfx Aoz Rq Ngshbenc Type: EP 25 * Pressing force: 25 tons * Stroke adjustment: 6 - 60 mm * Adjustable ram: 35 mm * Table dimensions: 330 x 230 mm * Installation height: 275 mm * Overhang: 180 mm * Foot pedal operation * Weight: 750 kg * Control panel with emergency stop * Newly painted!!!

Condition: refurbished (used), Year of construction: 1990, machine/vehicle number: 77168, functionality: fully functional, pressing force: 63 t, stroke length: 165 mm, table width: 650 mm, table length: 1,600 mm, total length: 2,300 mm, total width: 1,650 mm, total height: 2,220 mm, overall weight: 3,800 kg, year of last overhaul: 2026, Equipment: documentation/manual, safety light barrier, Hubtischstanzmaschine (Hydraulic table punching machine) - Punching force 630 kN - Table dimensions 1600 x 650 mm Kjdpfx Aoz Rmyhehbjnc - Activation via push button or single-stroke safety curtain - Oil filter new, hydraulics inspected, piston seals new - Electrical system completely repaired and partially renewed - Mechanics completely overhauled - Condition like new, new paint RAL 6011 green - Incl. punching plate P1/78NE, 10 mm thick - Without hydraulic oil Price on request

Condition: used, Year of construction: 1998, pressing force: 100 t, For sale is a used die-setting press from the manufacturer REIS with a maximum pressing force of 100 tons. The machine has a table size of 1,100 × 800 mm, a maximum installation height of 950 mm, and numerous features, including an ejector in the table, oil connection boxes for core pulls, and a 180° pivoting ram plate. It is therefore particularly suitable for die-setting operations, tool try-out, and testing in mold and tool making. ##### Technical Data + Information: Die-setting press – 100 tons – 1,100 × 800 mm Kedpfxoxd Tiqj Ahbjnc ==== General Information - Design: 4-column die-setting press - Manufacturer: REIS - Type: TUS 80–100 - Year of construction: 1998 - Pressing force: 26–100 tons (adjustable) - Retraction force max.: 45 tons - Table size: 1,100 × 800 mm - Max. table load: 5,000 kg - Installation height max.: 950 mm - Overall dimensions (W x D x H): approx. 2,100 × 3,395 × 3,670 mm - Total weight: approx. 8,500 kg - T-slots: DIN 650 – 22 mm ==== Hydraulic Cylinder - Pressing force range: 26–100 tons - Retraction force: 45 tons ==== Hydraulics & Drive - Hydraulic pump: REXROTH SYDFE11x71RN0030CAM - Motor power: 7.5 kW - Working pressure max.: 200 bar - Pressure accuracy: ±5 bar - Tank volume: 200 l - Hydraulic oil: HLP 36 ==== Motion System - 180° pivoting ram plate - Load capacity of the pivoted ram plate: up to 3 tons - Ejector in the ram: 3.5 tons - Ejector stroke: 130 mm - Extendable table - Table can be tilted to both sides - Movable ejector in the table - Oil connection boxes for core pulls - Injection molding filling device in the ram - Quick clamping plate on the ram ==== Control - Operation via control panel - Press force setting - Operation of core pulls - Control: Siemens / Pilz - Digital measuring device ==== Safety - Industrial machine control - Operator panel with safety functions ==== Electrical Connection - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Connection power main motor: 7.5 kW - Total connection power: 10 kW ##### Application areas: Die-setting, tool try-out, mold making, tool making, injection molding tools, automotive, prototype construction, trial tools, maintenance, production preparation (Die-setting press, try-out press, tool try-out press, hydraulic press, REIS TUS 100, 100 ton press, 4-column press, testing press, mold making press) Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply with all points of the national Brazilian safety standard NR 12, which is based on these. Our core strength lies in special machine construction and press automation. We distribute customized hydraulic presses at surprisingly favorable prices. For the hydraulics of the presses, components from leading European manufacturers are mainly used.

Condition: excellent (used), Year of construction: 2008, power: 42 kW (57.10 HP), pressing force: 320 t, stroke length: 4,000 mm, operating speed: 14 mm/s, reverse speed: 130 mm/s, throat depth: 400 mm, clearance between the columns: 3,150 mm, total length: 5,800 mm, total width: 2,300 mm, total height: 3,800 mm, overall weight: 23,000 kg, Make: LVD Type: PPEB-EFL 320/40 Control: CADMAN YOP: 2008 CNC Crowning Hydraulic tool clamping EFL Easy form laser measuring & correction system Set Tooling  Laser guide protection Controlled axis Y1/Y2/X/R/V-Axis Max. bending length: 4000mm Distance between column: 3150mm Max. pressing force: 320T Dis. Beam - Table: 570mm Beam stroke: 300mm Table Width: 200mm Troth beam: 400mm Approch speed: 120mm/min. Working speed: 14mm/min. Kjdpfez Rmp Nsx Ahbsnc Return speed: 130mm/min. Adjustment X-Axis back gauge:1000mm Control: CADMAN Power: 42kW Length: 5800mm Width: 2300mm Height: 3800mm Weight: 23000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2014, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2014 Pressing force: 532 kN Voltage: 400 Max. bale weight: up to 550 kg (depending on the material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2403 kg Machine dimensions: 180 x 157 x 298.5 cm Feed opening dimensions: 119.5 cm x 65 cm The HSM 1160 V-Press offers simple operation, a powerful pressing force, and is energy-efficient. Are you looking for a more compact model? Then take a look at the HSM 860 – ideal for those who want to save space without compromising on pressing force. Video available upon request! Ksdpfxez Rmg Ue Ahbjnc

Condition: good (used), Year of construction: 2007, functionality: fully functional, operating hours: 94,201 h, bending force (max.): 400 t, installation height: 595 mm, control type: CNC control, Bending length [mm] 3550 Pressing force [tons] 400 Control system Cybelec ModEva 10s Standard equipment: - Sturdy machine frame as a welded construction in all-steel design - Press beam with high bending strength - Electro-hydraulic upper drive via proportional valves - Modern block hydraulics - CNC rear stop for X and R axes, safe displacement of the stop fingers from the front by means of a safety interlock - Upper tool clamping system "EHT", manual, head width 26mm, load max. 3000 kN/m - Lower tool clamping system EHT, manual, clamping width 90mm for block tools and 13mm for single V-dies, without clamping - Control system: CYBELEC ModEva 10S on Windows, 2D graphic control with a 10.4" color screen - Control cabinet air conditioning + Rear stop - System 1, 5 axes, straight finger, 140mm wide, adjustment of R axis 150mm + EHT quick clamping device, for upper tools, pneumatic, head width 26mm, load max. 3000 kN/m (self-centering horizontally) + EHT lower tool clamping, pneumatic, clamping width 55mm + Hardened insert strip, for EHT lower tool clamping 55mm / 90mm Knsdpjz Rmcvofx Ahbsc + Lower tool displacement, CNC-controlled, infinitely adjustable via rear stop 1 (max. 4550 mm working length) + Crowning device CNC-controlled, in the table without tool clamping, load max. 3000 kN/m + Safety device LaserSafe (up to max. upper tool height 440mm) + Additional foot switch + Bending aid 1st arm, load max. 1500N with 2 integrated support strips in standard design + Bending aid 2nd arm, load max. 1500N with 2 integrated support strips in standard design + 2 pcs. support strips for a bending aid with T-slot 14mm and scale and ball rollers + 2 pcs. table extension for bending aid + Short park position left + Short park position right

Condition: used, Year of construction: 2016, Waste disposal system consisting of: 1 Clean air dust collector with briquetting press JP 350-L 1 Clean air dust collector with rotary valve airlock JZ 350-L Year of manufacture: 2016 Technical data JP 350-L: Suction nozzle: 350 mm Nominal volume flow: 6580 m³/h Maximum volume flow: 8000 m³/h Negative pressure at nominal volume flow: 2750 Pa Motor power: 11 kW Rated speed: 3000 rpm Technical data briquetting press CS3-12: Throughput capacity max. 50 kg/h or 0.75 m³/h (material-dependent) Motor, hydraulic pump: 3.0 kW Motor, agitator: 0.37 kW Motor, dosing screw: 0.75 kW External fuse: 16A Briquet diameter: 65 mm Kedpfjz Rrbdjx Ahbenc Weight: 780 kg Storage container: 1200 x 1200 mm Overall external dimensions: 3150 x 1625 x 2742 mm Space required: 4500 x 3000 x 2900 mm Availability: approximately 11/2027 Location: Hesse

Condition: ready for operation (used), Year of construction: 1995, Printing machines 2 colour offset printing machine KBA Rapida 72K Year 1994 Serial No. 65802317 Year 1995 Printing sections 2 Size of paper MAX 520 x 720 mm Size of paper MIN 210 x 297 mm Printing speed 17000 sheets/hour Size of the printing plate 557 x 720 mm Size of the printing blanket 585 x 730 mm Counter 32 mios Current state: In production Knjdpfx Aeyx Iyvehbsc