Used Platen Press for sale (12,736)

Condition: good (used), Year of construction: 2008, ECS High Press Year: 2008⁠ ⁠ Max format: 720 x 1020 mm Min format: 350 x 560 mm Cgsdpsttzwmofx Airju Gripper : 10 mm Max frame size : 1140 x 1280 mm Adjustment angle: 30 Screen fine adjustment : /- 10 mm Max speed : 3300 sh/h. Main power supply: 10KW without YV dryer . Weight: 5500 Kg ECS UV dryer with 2 lamps - year 2002

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, color channels: 4, paper width (max.): 74 mm, paper height (max.): 53 mm, Age: 2004 Max.Size: 74 x 53 cm (29 x 20 inch) Current State: In production Colors: 4 Impress.Count: 68 mio Extras: | Perfector | Touch-screen Control | Autosize Age: 2004 Max.Size: 74 x 53 cm (29 x 20 inch) Colors: 4 Impress.Count: 68 mio Extras: - Perfector - Digital Controls - Autosize Description: Man-Roland 304 Year: 2004 Imp count: 68 mil Colours: 4/0 or 2/2 Autosize Quick action plate clamp No diagonal register Technotrans aplha.d 40L Available immediately In production Located: Europe Eastern Available: Immediately Price: On Request Cgjdpfxoxnl E So Airsu Important: Very good condition Located: Europe Eastern Current State: In production Available: 10-2025 Price: On Request

Condition: good (used), Year of construction: 1996, Man-Roland 306 L V T Year: 1996 Cgjdpfjy Hwl Djx Airou Colours: 6 coating Perfecting: 1/5 and 2/4 Max size: 520 x 740 mm Max speed: 15.000 sh/h Autoplate Auto format Max weight: 0,6 mm Dryer In production Available immediately

Condition: used, Year of construction: 1999, Roland R704 3B Codpfxsycv U Is Airogu Year: 1999 Color 4 0 / 2 2 Imp count: 163 mil Max speed: 15.000 sh/h APL Blanket Washing System - with Brush Ink Roller Washing Ink Temp control - Without Chiller Tehnotrans Steel plate in feeder and delivery Suction feed board powder sprayer Technotrans Beta refrigeration Axial circumferential diagonal register remote control Automatic format adjustment Color Pilot Control Sheet decurler Air Glide delivery Tape inserter at delivery In production Available immediately

Condition: ready for operation (used), Year of construction: 1988, functionality: fully functional, machine/vehicle number: 65951607, color channels: 4, paper weight (min.): 60 g/m², paper weight (max.): 500 g/m², paper width (max.): 720 mm, paper height (max.): 520 mm, input voltage: 400 V, Koenig Bauer / KBA Rapida SRO 4 | 1988 | Offset printing machine Year: 1988 Format: 52x72 cm Colours - 4‑colour offset Speed -12,000 sheets/hour Paper Weight - 60–500 g/m² Feeder - Mabeg (± Technotrans) Inking Adjustment - Colortronic remote key Cedswzt Ttopfx Airsgu Dampening - Technotrans / Varidamp (alcohol) Dryer - Infrared Powder Spray - Weko Cooling - Baldwin Cylinders Chromium-plated

Condition: used, Year of construction: 1983, Solna D25 Year: 1983 Units: 8 (1 1 units) Cgjdpfx Aisymby Roreu Folder: Tabloid / A4 / A5 Meg D 200 S automatic reel rewinder Technotrans refrigeration unit Plate puncher Plate bender Spare main motor Compressor Under power Available immediately. The machine was used for printing news papers

Condition: excellent (used), Year of construction: 2008, Used flexo machine NILPETER FA4-8-color Labelpress •⁠ ⁠Age: 2008 •⁠ ⁠Serial No.: F4289 •⁠ ⁠Web Width: 420 mm - 16.5 inches •⁠ ⁠Servo Driven •⁠ ⁠8 x Flexographic Print Units •⁠ ⁠8 x UV Dryers System from GEW •⁠ ⁠Labelshifter •⁠ ⁠Web Control •⁠ ⁠Splicing Table Csdpey Sirtofx Airsgu •⁠ ⁠Die Cutting •⁠ ⁠Die Cutting Stations •⁠ ⁠Maximum Rewind Diameter 1000 mm – 40“ •⁠ ⁠Video Monitoring BST •⁠ ⁠Turn Bar •⁠ ⁠Automatic Register •⁠ ⁠Prints Film 25-300 Microns (3 Options: Folie or Paper or Carton) •⁠ ⁠And tools (Magneticcylinder, Printingcylinder, Aniloxcylinder etc.) In production Available immediately

Condition: excellent (used), Year of construction: 2006, Year: 2006 Specification Detail Die cutting and stripping unit Max. Sheet Size 1050 x 750 mm Min. Sheet Size 450 x 370 mm Max. Die Cutting Area 1040 x 730 mm Max. Speed 7,500 sheets per hour Max. Pressure 250 tons Cgjdpsyrflhsfx Airou Stock Range 100 gsm paper to 2000 gsm cardboard; up to 3 mm corrugated board Min. Gripper Margin 4 mm Machine Weight 18,000 kg

Condition: excellent (used), Year of construction: 2000, Man-Roland 504 F Year: 2000 Cgjdsw Nhqzjpfx Airsu Colours: 4 Max thickness: 1 mm Straight machine Rietschle Air Center Tachnotrans Alpha D Weko Powder AP 250 No damages on gears or cylinders In production Available immediately

Condition: good (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: DG-60-B 95174, type of input current: AC, punching force: 400 t, machine base height: 2,400 mm, input voltage: 380 V, input frequency: 50 Hz, Iberica DG-60-B Flatbed Die Cutting Machine Size: (250 x 450) - (860 x 1.140) mm Weight: 19.000 kg Power Req.: 380 V / 50 Hz Installed power: 13,5 kW Used space: 9.800 x 3.700 x 2.400 mm Status: mnf. 1995 Machine has stripping station, for clean product pallet delivery Pressing force : 400 tons Working speed : up to 5.000 sheets / hour Cardboard thickness : up to1,5 mm Corrugated cardboard thickness : up to 5 mm Codpewwtn Ajfx Airogu Gripper margin 8-15 mm, standard 10 mm Stroke of stamping plate 55 mm, Suitable for cardboard and corrugated cardboard type : E, B, C, EB, EE, BE Machine in printing house, under power, test is possible Located: Europe Eastern Current State: Under power Available: 07-2025

Condition: good (used), Year of construction: 2004, Heidelberg SM 74-10-P-H Perefcting: 5/5-10/0 Max size: 53 x 74 cm Age: 2004 Codpfx Aievv Nrcorsgu Location: Europe •⁠ ⁠CP 2000 •⁠ ⁠Autoplate •⁠ ⁠CP Tronic •⁠ ⁠Alcolor Vario •⁠ ⁠Color Asisstant •⁠ ⁠Ink Temperature Control •⁠ ⁠Blanket and Impression Cylinder Wash Up Device •⁠ ⁠Water cooled •⁠ ⁠In Production

Condition: used, Year of construction: 2018, Technical specifications: Manufacturer: HAEGER Model: 618MSP-He Year of manufacture: 06/2018 Condition: good, used Connections: 3 phases, 50/60 Hz, 380/480 V, 3.7 A Short-circuit current: 5 kA Prospective short-circuit current: 5 kA Clamping force: 54 kN (6 US tons) Stroke: 458 mm (18 inches) Weight: approx. 1,400 kg Dimensions (L x W x H): 160 x 100 x 240 cm Hydraulic drive system with integrated oil filter Patented HAEGER safety system Cgsdpfx Aey Uvh Toirsu Fastener and workpiece counter Integrated TPS tool safety system Adjustable dwell time Hydraulic cylinder stroke limitation possible Program memory Adjustable fixed stop (force or stroke-limited operation possible)

Condition: reconditioned (used), Year of construction: 2019, operating hours: 3,000 h, functionality: fully functional, pressing force: 70 t, year of last overhaul: 2025, Technical data packing press / can press / metal sheet press: Manufacturer unoTech GmbH Type UPAXX 70 Year of manufacture 2019 Operating hours approx. 3,000 hours Pressing force 700 kN at 315 bar Filling opening chute 420 x 1,250 mm (d x w) Channel cross-section (package dimension) 350 x 500 mm (h x w), length depending on material Drive power 30 kW Connected load 40 kW Cjdpfoy Urvajx Airogu Power consumption, total 70 A Throughput capacity for empty beverage cans with: one pressing stroke approx. 1.7 t/hour two pressing strokes approx. 2.5 t/hour Achieved compaction approx. 1200 kg/m³ Hydraulic oil tank capacity 850 l Press dimensions built up 8,000 x 1,600 x 2,500 mm (l x w x h) Transport weight press approx. 9.5 t Accessories: Oil cooler 1.5 kW, oil tank heater 1.5 kW, press box made of wear-resistant steel S355 Material properties: According to the manufacturer, this machine is suitable for pressing tin cans, metal sheet offcuts, sheet steel as well as aliminium, brass and copper waste. Condition of the baler: The packing press has been fully overhauled in our workshop. The press is in very good condition; please see the demonstration video following the overhaul. The machine sustained transport damage whilst being moved. The control cabinet was damaged and slightly dented by a forklift truck, and the main switch (on/off switch) was damaged. These damages are reflected in the significantly reduced sale price and must be repaired by the buyer at their own expense. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 2,000 mm, filling opening length: 1,020 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,000 kg, oil tank capacity: 3,100 l, year of last overhaul: 2026, volume flow: 795 m³/h, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Cgedoy Uruvepfx Aireu Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see video for the machine function test. The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Condition: ready for operation (used), Year of construction: 2015, Well-maintained, used press brake from Durma. Type: AD S 25100 Capacity: 2550 x 100 tons Y1, Y1, X, and R axes CNC controlled Delem DA66T CNC control CNC crowning Codpfx Aiey Urp Hjrogu Akas Fiesler laser safety system Amada/Euro clamping system Includes 1 set of tooling

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, warranty duration: 24 months, input voltage: 400 V, DGUV certified until: 06/2027, total length: 700 mm, total width: 600 mm, total height: 1,520 mm, type of input current: three-phase, power: 1 kW (1.36 HP), electrical fuse: 10 A, Semi-automatic dough divider and rounding machine, bun press for burger buns, pita bread, burek, flatbread, etc. NEW +++ Divobun 4-14 +++ NEW proven technology … already widely used! Stainless steel knives with an easy-to-clean setting! with 3 rounding plates Dough portion range: 130 to 400 grams/piece TOP dough divider Machine is mobile DGUV V3 certified, only available from us Connection: 400V, 16A-CEE plug Dimensions: 600 x 700 x 1520/2200 mm (W x D x H) New machine 2-year warranty + spare parts service Cjdpfx Aierkzgworjgu Optional: Leasing & rental service Maintenance contract Service package Stainless steel machine platform Delivery service Additional rounding plates Instruction and commissioning Other TOP dough dividers in stock!

Condition: used, functionality: fully functional, Screw-type electric shelving press ITALPRESSE 2500x1200 mm Specifications: • Condition - used • Manufacturer - ITALPRESSE • Shelves with dimensions 2500 x 1200 mm • Max. clearance between shelves 500 mm • Straight, clean shelves, without dents • 2 screws with a diameter of 50 mm • Drive motor with a power of 0.75 kW • Original paint • Overall dimensions 285 x 120 x 160 cm (L x W x H) Additional information: Cgedpjza If Tsfx Airou • The machine is in good technical condition, ready for immediate use • The photos shown illustrate the actual condition of the item for sale • Possibility to switch on and inspect the device on site • Free training on machine operation (at the company's premises) • The price stated in the auction does not include VAT and transport costs Financing and transport: • We arrange transport using the MDD fleet, courier companies or external carriers • We offer financial support in the form of leasing or a leasing loan

Condition: excellent (used), Ott hydraulic veneer press, in top condition. 120 tons Cgsdpfxeza Hxxe Airsu Pressing area: 2550 x 1350 mm Water-heated veneer press Test run can be arranged at any time.

Condition: used, Year of construction: 1993, Number of drilling spindles: 8 pcs Cjdpfxsza Hlfj Airegu Pitch: 32 mm Drill chuck: Clamping surface, drill shank: 10 mm Operation: Foot pedal Drilling direction: from above, fixed Number of material clamps: 2 pcs Type of material clamping: pneumatic Design: stationary Location:

Condition: used, Veneer Press OTT JU 90 -used- Codpfx Aijwmmraersgu ----- Technical Specifications ----- Pressing area: 2,550 x 1,350 mm, Power per heating plate: 9100 W, Number of cylinders: 4

Condition: new, Wood briquetting press Amis ABP 60 L -Exhibition machine- ----- Technical data ----- Briquette Ø: 60 mm, Hydraulic unit 3 kW: 140 bar, Voltage: 400 V, frequency: 50 Hz, Fuse protection: 16 A, Capacity approx.: 20-35 kg/h, Weight approx.: 300 kg - Easy handling - Hydraulic control - Briquette diameter 60 mm - Briquette length adjustable as required (max. 60 mm) Cedpfx Aieu R Sxxerogu - Motor equipped with motor protection switch and emergency stop - No electronic components such as regulators, sensors and sensors or complicated controls - Large storage container - Tempered briquette tongs - Replaceable press bar - Pressing without the addition of additives - Thanks to the pre-compressor, even voluminous chips can also be processed - No adjustment work or pressure monitoring of the pressure necessary - New exhibition machine -

Condition: used, Veneer Press BÜRKLE U 80 - used - Emergency stop cable, Control via push button ----- Technical Data ----- Pressing area: 2,550 x 1,300 mm Csdpsxfg A Hofx Airjgu Power per heating plate: 9,100 W Max. opening height: 4,000 mm Number of cylinders: 6 pcs. Dimensions (LxWxH): 3,150 x 1,450 x 1,785 mm Weight: 3,700 kg

Condition: used, We offer this used Langbow TM32-2M Twin Head Tube Bender, year of construction [not specified]. Manufacturer: Langbow Model: TM32-2M Condition: used Type: Twin Head Tube Bender The following tooling is included with the bender, Csdpfx Aijza Eqmjrsgu 7/8"s Round Twin Tube Twin Bend 50mm Radius, 5/8"s Round Twin Tube Single Bend 60mm Radius, 1" Inch Round Single Tube Twin Bend 50mm Radius, 1" Inch Square Single Tube Twin Crush Bend 15mm Radius, 1" Inch Square Single Tube Twin Crush Bend 50mm Radius If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 1950, machine/vehicle number: 26284, functionality: unexamined, power: 1.6 kW (2.18 HP), pressing force: 30 t, overall weight: 1,100 kg, We offer this used Raskin 30TRG crank press, year of construction 1950. Machine has not been used for 30+ years and was sitting in a corner of the workshop under a tarp. Now it must go. Cgodpfx Ajza En Seirou Untested and condition unknown, but was working when put aside, and externally looks in working order. Included is the punching tooling visible on the pictures (on the pallet + cardboard box).

Condition: new, Year of construction: 2026, functionality: fully functional, power: 11 kW (14.96 HP), pressing force: 80 t, stroke length: 350 mm, table width: 1,400 mm, table length: 840 mm, oil tank capacity: 230 l, total width: 1,600 mm, total height: 3,600 mm, overall weight: 8,000 kg, Equipment: CE marking, safety light barrier, NEW EXNER hydraulic testing press, type PG 80 Number of press cylinders: 2 Nominal force (adjustable): 2 x 400 kN Retraction force: 2 x 150 kN Ram stroke: 350 mm Ram width: 1400 mm Ram depth: 840 mm Guide length: 750 mm Ram speed, load up to 100%: approx. 0-10 mm/s Ram speed, retraction: approx. 0-20 mm/s T-slots, table/ram according to DIN 650 = 22 mm Installation height – stroke at top: 600 mm Table width: 1400 mm Table depth: 840 mm Column clearance, front: 1000 mm Column clearance, side: 600 mm Table height above floor: 1100 mm Nitrodyne control / retraction, spring force to be compensated under spring tools: max. 150 kN Accuracy: Maximum deviation of plan parallelism from the ram surface to the table surface (from right to left) Cgedpfx Aioza Em Usrju in free travel (absolute) < 0.05 mm in eccentric loading with maximum force (absolute) < 0.10 mm Table/ram deflection at nominal force and 2/3 surface coverage: 0.10 mm Starting accuracy U.T. without mechanical depth stop: ± 0.05 mm Optionally, a servo roll feed can be offered and installed.