Used Plasma Welding Machine for sale (65,371)

Condition: used, functionality: fully functional, Spot Welding Machine Fab. Dalex Type SF 8 Blodpfx Aex Ic T Aehved Technical Data Manufacturer: Dalex Type: SF 8 Rated power at 50% duty cycle: 8 kVA Rated primary voltage: 380 V / 50 Hz Max. welding power: 23.7 kVA Max. short-circuit current: 8.8 kA Cooling water flow rate: 4 l/min Electrode force: 17 to 390 daN Open circuit voltage: 2 to 3.2 V Stages: 4 Throat depth: 235 mm Dimensions: L 750 x W 350 x H 1100 mm Weight: 77.5 kg All information without guarantee. A demonstration can be arranged at any time in our exhibition hall.

Year of construction: 2017, condition: excellent (used), functionality: fully functional, machine/vehicle number: PL1500-12-REV, High frequency welding machine Year of construction 2017 Blodoymdzkspfx Ahvsd Full Review Year 2026 Power 12KW Electrode 20x1200mm 150cm of arm Large material tank Low pressure system for operator hand safety Back mass plate to the electrode 3 thrust cylinders Automatic adjustment Shielded electrode holder for radio frequency output Triode ITL9-1 tested and fully functional (12 months warranty) User manual 12 months warranty

Condition: used, Automatic rebar mesh welding machine MCC001 The machine is designed for welding steel reinforcement mesh from previously shortened reinforcements for rods that comply with the EN 10080 standard. Technical data: Diameter of reinforcing bars: 4mm, 5mm, 6mm Number of longitudinal bars: 2 – 12 Length of longitudinal bars: 200mm – 3000mm Minimum step between longitudinal bars: 100mm Pitch of crossbars: 10mm – 999mm Length of crossbars: 100mm – 1250mm Screen moving speed: 0.1m/s – 1m/s Compression force: 60kg – 190kg Productivity: 1 cycle/minute Electricity: Bledeymcpyepfx Ahvjd Supply voltage: 400V Voltage frequency: 50Hz Connection type: TN-C Power: 100kVA Higher engine power: 0.8 kW Power of one welding transformer: 35 kVa Pneumatic indicators: Working medium: Compressed air Working pressure: 6 bar Air consumption: 250 l/min Cooling: Cooling type: water cooling Circulation type: forced circulation Maximum incoming heat carrier temperature: 35 °C Heat carrier consumption: 60 l/min Diameter of reinforcing bars: 4 mm, 5 mm, 6 mm Number of longitudinal bars: 2 – 12 Length of longitudinal bars: 200 mm – 3.000 mm Minimum step between longitudinal bars: 100 mm Pitch of crossbars: 10 mm – 999 mm Length of crossbars: 100 mm – 1250 mm Screen moving speed: 0.1 m/s – 1 m/s Compression force: 60 kg – 190 kg Productivity: 1 cycle/minute Supply voltage: 400 V Voltage frequency: 50 Hz Connection type: TN-C Power: 100 kVA Higher engine power: 0.8 kW Working medium: Compressed air Working pressure: 6 bar Air consumption: 250 l/min Cooling type: water cooling Circulation type: forced circulation Heat carrier consumption: 60 l/min

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: SWM001, type of input current: DC, nominal power at 50% duty cycle: 37 kVA, input voltage: 380 V, type of cooling: water, overall weight: 230 kg, warranty duration: 24 months, welding power (max.): 75 kVA, total width: 500 mm, total height: 1,620 mm, total length: 950 mm, Spot welder / welding machine with water cooling – 75KVA – adjustable power, resistance, etc., + spare tips Blodpeyl Sy Esfx Ahvjd

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, The machine is almost new, coming from a company liquidation. Bjdpfjyl R U Ijx Ahvsld

Year of construction: 1998, condition: ready for operation (used), functionality: fully functional, MSE Hollinger, for welding the 4 corners of plastic components in a single operation; used, technically refurbished in 2017, year of manufacture 1998. Welding dimensions: Max: 2920 x 3650 mm, Min: 420 x 490 mm. Weld bead limit: 2.0 mm. Blsdpfxjyl H Hmj Ahvjd

Condition: used, machine/vehicle number: 73947, Spot welding machine NimakPMP5/35 Welding power: 35 kVA, connected load: 83 kVA Bodpfsyl Acqjx Ahvsld

Condition: used, Spot welding machine type POU 33, connected load 40 kVA, no. 445 Blsdpfx Ahjyl Ab Tsvsd

Condition: good (used), functionality: fully functional, Ultrasonic welding unit BRANSON, model 8.200 Bljdpfxoylpqbs Ahved

Condition: new, Year of construction: 2024, NEW Plasma Cutting Machine. Dimensions: 3,000 mm x 1,500 mm Max. steel cutting thickness: 22 mm Max. stainless steel cutting thickness: 12 mm Supplied with CAD CAM software. DWG and DXF data transfer via USB and network card. CE certification. ISO 9001, GB/T 19001. Bjdpfx Ahotu E Dusveld 120 A generator. The operational cost is extremely low – only 5.5 kW and compressed air!

Condition: used, Year of construction: 2021, functionality: fully functional, type of input current: three-phase, working range: 6,000 mm, sheet thickness (max.): 25 mm, overall weight: 800 kg, The plasma cutting machine can cut round, square and rectangular tubes with a plasma jet. Easy programming in the office or at the machine with the help of a CAM system. Import of step files possible. The cam system creates a CNC code which is processed on the machine. Nesting manual or automatic. The machine is supplied with a plasma system from the manufacturer Hypertherm. The cutting contour is defined and create by the software. The created CNC code can send to the machine via USB or network. The program can be easily choose via the 12"touch display. The automatic cutting process is started after manual insertion of the workpiece. Dragon 220 Round tube - 220 mm Square tube - 150 mm Maximum part weight - 250kg Maximum feed - 250 mm/s Raw length up to - 6000mm Drives - Servo synchronous motor Gear/Rack - hardened and ground 4 jaw chuck - 200 mm 12" touch screen display Bodpfx Asx S Ux Eehvold Can be seen working at our factory in Ireland

Condition: used, Year of construction: 2021, UltraSharp plasma cutting machine. The machine is fitted with the Burny cnc control ,fitted with a Lincoln Electric 170 amp high definition plasma cutting system including Inova automatic torch height control and UltraSharp cutting technology. It would be capable of a cutting area of 4,000mm x 2,000mm fitted with a Bljdpfsyli Hiex Ahvjd sectional fume extraction table.

Condition: used, Year of construction: 2022, RUR2500P UltraSharp plasma cutting machine, complete with a Burny 10 icd plus CNC control and a Lincoln Electric Fineline 170 amp plasma cutting system including a nova automatic torch height control, 8m x 2m extraction table with a 8m x 2m cut tume extraction system Bljdpsylizyefx Ahvjd

Year of construction: 2004, condition: used, Hollinger 4-point welding machine type ASP-L Blodpfx Ahsylingeved

Year of construction: 1991, condition: ready for operation (used), Technical features: heated knives, weld bead limitation 0.2mm, optimization of the welding result through the parallel sliding welding process, individual adjustment of the welding parameters, quick changing of the outer contour allowances by means of holding magnets. Air consumption at 6bar: 15l/Takt, angle adjustment range: 30-180°, profile height: 30-105mm, max. profile width at 90°: 157mm, compressed air connection: 8.7bar, power: 2.7kW, supply voltage: 220V, 50/60Hz, length: 770mm, width: 880mm, height: 1560mm, weight: 320kg. An inspection on site is possible. Bjdeylbrdjpfx Ahvsld

Condition: like new (used), Year of construction: 2023, functionality: fully functional, input voltage: 230 V, ground cable length: 3,000 mm, warranty duration: 3 months, type of cooling: air, hose package length: 4,000 mm, welding current (min.): 5 A, welding current (max.): 200 A, For sale: Cjays Tig 200 DC Pulse 5-200 AMP 230 Volt Gas-cooled 2/4 Step Pulse Pre gas / Post gas Up slope / Down slope Start current / End current Elektrode option Steel + Stainless Steel weldable test welding possible Including 4 Meter SR17 welding torch, earht work lead, gas cable, and 3 months warranty. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. Bsdpfx Ahoyk Tnzjvjld We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: used, Year of construction: 1987, functionality: fully functional, machine/vehicle number: 118210287, type of input current: three-phase, nominal power at 50% duty cycle: 80 kVA, short-circuit current: 35,000 A, input voltage: 380 V, overall weight: 480 kg, Technical Data Bodpfxsyk Rn Ss Ahvjld Machine Dimensions (L x W x H): 0.73 x 1.22 x 1.57 m Machine Performance Rated Power at 50% Duty Cycle: 80 kVA Continuous Power: 56.6 kVA Maximum Short-Circuit Power: 306 kVA Maximum Welding Power: 245 kVA Machine Voltage Secondary Open-Circuit Voltage: 8.44 V Power Supply Rated Primary Voltage: 380 V Rated Frequency: 50 Hz Short-Circuit Current: 35 kA Maximum Welding Current: 28 kA Permissible Duty Cycle at Maximum Welding Current: 55% Cylinder Electrode Stroke Max. Electrode Stroke (EH): 90 mm Electrode Force: max. 60 N / min. 10 N Spot-Welding Armature Arm Spacing: max. 360 mm / min. 160 mm Electrode Arm: 60 mm upper / 70 mm lower Electrode Holder: 33 mm Electrode Holder Adjustability: 110 mm upper / 170 mm lower Height Adjustment for Electrodes: 100 mm adjustable Throat Depth: 500 mm Materials / Sheet Thickness: S 235JO+N / 0.5–6 mm Stainless Steel / 0.5–4 mm Light Alloy / 0.5–3 mm

Condition: new, Year of construction: 2021, Professional TIG Welding machine FRONIUS type TransTig 2200 Job G/F TIG direct current (DC) Maxi power: 220 A 2-step and 4-step mode (see more technical details on photo) Bjdpjyk Elrsfx Ahvjld Year of construction: 2021 New, never used (Purchased price: 3 594 euros) Voltage: 230 V mono

Condition: good (used), functionality: fully functional, machine/vehicle number: BMP 6-5, throat depth: 250 mm, overall weight: 650 kg, arm spacing: 590 mm, nominal power (apparent): 80 kVA, Manufacturer: Nimak Model: BMP 6-5/80 Description: Projection welding machine Rated power: 80 kVA Max. force: 1100 daN Throat depth: 250 mm Bodpfxjv N U Tls Ahvsld Opening: 350 - 590 mm Weight without control cabinet: 650 kg

Condition: new, Year of construction: 2026, A compact device using the FIBER technology, designed for welding many types of metals with precision far exceeding traditional welding methods. Advanced technological solutions used in the offered welding machine allow to perform high-quality and repeatable welding welds of thin-walled materials and parts without the risk of deformation. Advantages of a laser welding machine Easy to use - thanks to the applied solutions and well-thought-out structure, the operator can start working after a short training Low indirect radiation, when working, it is enough to wear protective glasses to filter strong light, Welding much faster than with traditional methods, productivity can be increased by up to 3 to 10 times Concentrated beam: slight structure change due to the small heat-affected area, The repeatability of the welds, the welding seam is nice, the welds are high strength. Very thin materials such as 0.5mm stainless steel can be welded. Option of welding with or without wire. Technical parameters Maximum power 2000W Laser wavelength 1080nm Depth of penetration (stainless steel 1 m/min) 4.57mm Depth of penetration (black steel 1 m/min) 3.59mm Depth of penetration (aluminum 1 m/min) 4.0mm Depth of penetration (brass 1 m/min) 4.0mm Bjdsizr Rlspfx Ahvsld Welding speed 0-120mm/s Automatic Wire Feeder Ø 0.8 - 1.6mm Maximum power consumption ≤6.0kW Cooling system aqua Working voltage 400V Shielding gas consumption 20L/min Dimensions 600 x 1100 x 1100mm Weight approx. 185 kg LATEST GENERATION WELDING HEAD WOBBLE head; Automatic wire feeder included; Adjustable spot size 0-5mm; The powerful welding head allows many types of beam guidance: -, ○, ◎, ⊙, 8, ∞; Integrated connections for shielding gases and cooling system, Interchangeable nozzles allow for welding at different angles, 10 m of optical fiber that connects the head to the source, Adjustment of welding parameters directly in the head without having to go to the control panel; Full ergonomics - thanks to the light and flexible design, the head can perform welds even in hard-to-reach places; Easy to service - quick and easy replacement of the protective lens. Automatic wire feeder included The wire feeding system is synchronized with the welding machine software. The task of the feeder is to feed the filling, thanks to which the operator can focus 100% on the work of the head. Set includes laser welding machine with built-in cooling system welding gun with adjustable focus and a set of accessories Fiber laser source automatic wire feeder set of cables starter kit of nozzles and protective glasses THICKNESS OF WELDED MATERIALS Material WELDER POWER 1000W 1500W 2000W Stainless steel 0.5-3.0mm 0.5-4.0mm 0.5-5.0mm Black steel 0.5-2.5mm 0.5-3.5mm 0.5-4.5mm Galvanized steel 0.5-2.5mm 0.5-3.0mm 0.5-4.0mm Aluminum 0.5-1.2mm 0.5-1.8mm 0.5-4.0mm Brass 0.5-1.2mm 0.5-1.8mm 0.5-2.5mm

Condition: new, Year of construction: 2026, CNC plasma, oxygen-gas burner is a device designed for cutting out shapes from sheets (any shapes). This machine features simplicity and easy handling. Our CNC cutter ensures high accuracy and repeatability of cutting (0.1 mm), allowing for the burned shapes to be transferred directly to the next stage of manufacturing. Why is it profitable? Possibility of burning using plasma or gases 2 in 1 modest dimensions of the machine allow for placing it anywhere THC voltage height controller precise blowtorch setup Bledpfx Ahei Apn Usved a very accurate cut, without further additional machining necessary sheet detection system a handy control panel an intuitive machine handling possibility to cut and gouge steel a library of standard geometrical figures Features and equipment 1500×3000 working area Y-axis 140 mm (clearance) range Usage of rigid and stable construction Gases mixer Gas blowtorch Voltage height controller Blowtorch height regulation system Blowtorch height and stabilisation sensor FastCAM software along with a licence in English USB port as well as internal and external memory User–friendly interface – easy operation, even for people without prior experience of working with such programs as FastCAM Import of drawings in the *.txt format from any programs similar to e.g. AutoCAD, SolidWorks etc. MAKRO – a library containing standard shapes enables creating figures without the necessity of drawing them. NESTING – an automatic arrangement of elements on a sheet DEMO – shows a working path without having to turn on the plasma source or oxygen * Illustrations are preview only, the device is sold without the table. The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, Introducing the latest model of the CORMAK WL3000 industrial laser welder, which combines advanced FIBER technology with innovative design solutions, offering unparalleled precision and efficiency. This device is designed for welding various types of metals, which ensures the quality and repeatability of welds at the highest level. Thanks to the 3-in-1 function enabling welding, cutting and laser cleaning, the device is versatile and effective in many industries. Why choose CORMAK WL3000? The CORMAK WL2000 laser welding machine is the perfect solution for professionals looking for reliability, precision and efficiency. Its innovative design and advanced cooling system make it a future-proof device that can handle even the most demanding welding tasks. Pre-order now and take advantage of this unique offer! Key Features and Benefits Advanced cooling system : A new, more efficient water cooling system ensures optimal operating temperatures, allowing you to work longer without interruption and increasing the lifespan of your device. Innovative design : The ergonomic and lightweight design of the welding head allows for welding even in hard-to-reach places. Thanks to the adjustable spot size (0-5 mm) and replaceable nozzles, the operator has full control over the welding process. Easy to use - thanks to the solutions used and the well-thought-out design, the operator can start working after a short training Low indirect radiation, just wear protective glasses to filter strong light when working Much faster welding than traditional methods, productivity can increase by 3 to 10 times Concentrated beam: slight change in structure due to small heat-affected area, Repeatability of welds, the weld seam is nice, the welds are of high strength. Very thin materials such as 0.5 mm stainless steel can be welded. Welding option with or without wire. The integrated laser cleaning function increases the range of applications of the device. Possibility of using the cutting option - ensures excellent cutting quality, without mechanical processing. Technical parameters Maximum power 3000 W Laser wavelength 1070nm Fiber optic length 10m Working modes Continuous / Modulated Air pressure 10 - 15 L/min Welding speed 0-215mm/s Automatic wire feeder Ø 0.8 - 2.0 mm Bedpfxskkbw Ue Ahvjld Maximum power consumption ≤11.0kW Focal length 150mm Cooling system water Operating voltage 400V Shielding gas consumption 20L/min Dimensions 600x1100x1100mm Weight approx. 207 kg

Year of construction: 1999, condition: excellent (used), working width: 620 mm, machine/vehicle number: SE 01510 A10, HP60/40 Heating Element Welding Machine by BRANSON The machine is hydraulically driven, supported by precise positioning and control systems. It is equipped with its own vacuum pump. Usable heating element area: Width 600 mm x Depth 400 mm Maximum part dimensions: - Maximum part width: 620 mm - Maximum part depth: 420 mm - Maximum part height (top): 350 mm - Maximum part height (bottom): 350 mm (Combinations of part heights possible, depending on contour) - Maximum operating temperature for contact process: 400°C The machine's modular frame design enables straightforward conversion and modification. The side doors in the welding area can be easily opened for quick tool changes. The automatic safety lift door provides high operator safety. Temperature controllers on the control panel feature actual/setpoint displays. The control unit is a Siemens PLC (S7-300 control system). The heating elements are equipped with temperature sensors for temperature regulation and feature a safety shutdown function in case of overheating. The pin systems in the clamping plates ensure reproducible fixture positions. Advantages of heating element welding technology: - Reliable welding of workpieces with minimal or varying wall thicknesses - Low reject rate thanks to dimensionally accurate and reproducible welds - Precise time, temperature, and force control allows even sensitive components to be welded - Nearly all thermoplastics can be welded by this method - Different types of plastics can be joined (compatibility must be checked) Technical specifications: Bljdpfx Ahoykvdlevsd - Power supply: 3 x 400 V AC + N + PE - Power rating: 25 kVA - Rated current: 20 A - Required cable cross section: 5 conductors, each 6 mm² - Required pneumatic connection: 6 bar Machine dimensions: - Machine width: approx. 1.22 m - Machine width with control panel: approx. 1.8 m - Machine depth: approx. 2.1 m - Machine depth with control panel: approx. 2.6 m - Machine height: approx. 2.4 m - Machine height with raised safety door: approx. 2.85 m (door open) Machine weight: approx. 2.2 t

Condition: excellent (used), 2 - Used Urban AKS 4110 head welding machine - Heated stainless steel blades on top - Heated stainless steel blades on bottom - Weld seam limitation: 0.2 mm - Maximum welding length: 3.25 m - Set of support arms Bedpfx Ahoykp Dxevold

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 30 mm, sheet thickness aluminum (max.): 15 mm, sheet thickness copper (max.): 15 mm, overall weight: 2,200 kg, input voltage: 400 V, total width: 3,000 mm, total height: 1,800 mm, total length: 4,300 mm, workpiece weight (max.): 1,000 kg, power of the servo motor: 750 W, working width: 1,550 mm, positioning speed: 50 m/min, table width: 1,550 mm, cutting current: 100 A, warranty duration: 24 months, working length: 3,050 mm, travel distance X-axis: 1,550 mm, travel distance Y-axis: 3,050 mm, travel distance Z-axis: 150 mm, Kompakt plasma cutter manufactured in Poland! Brand new machine, lead time from 8 to 12 weeks. Key features: - robust mechanics based on a welded and stress-relieved frame, - hardened helical rack gears, - fume extraction flap control system for enhanced extraction efficiency, - drawers for small parts and for easy cleaning of the combustion chamber, - one of the fastest machines on the market – 50 m/min, - ThermaCut EX-TRAFIRE 100SD plasma unit, - intuitive, straightforward controls, - fume extraction fan. Alternative configurations possible: - change of working area Bedpfeykpp Ijx Ahvold - use of a different plasma unit