Used Plan Schneider for sale (172)

Condition: used, Year of construction: 1987, 4-roller feed mechanism Manufacturer: Schneider Type: V4N Year of manufacture: 1987 Technical data - Feed rate of 4 - 22 m/min Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding. Laodpfjzuz Najx Apmsf

Condition: used, Year of construction: 1986, Table milling machine Manufacturer: Schneider Type: SK2/4 II Year of manufacture: 1986 Technical data - 3,000 - 10,000 rpm - Runs in both directions (left/right) Lodpfx Aezuyxaopmjaf - with Haffner feed unit - including accessories Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: new, Year of construction: 2018, functionality: fully functional, Schneider Electric Masterpact NW32HF 3200 A four-pole drawout switch-disconnector, supplied with its matching withdrawable cradle/chassis. Heavy-duty low-voltage switching device suitable for use as a main incomer, bus-coupler or isolating switch in industrial distribution boards, generator systems, data centres and other high-current electrical installations. Ljdszlivpjpfx Apmeaf This is a switch-disconnector, not a circuit breaker with an electronic protection trip unit. The photographed configuration corresponds to the Schneider Masterpact NW32HF 4-pole, 3200 A drawout version. Technical details Manufacturer: Schneider Electric Series: Masterpact NW Model: NW32HF Schneider reference: 48321 Equipment type: Switch-disconnector / isolator Rated current: 3200 A Number of poles: 4 Version: Drawout / withdrawable Rated operational voltage: 690 V AC Frequency: 50/60 Hz Rated insulation voltage, Ui: 1000 V Rated impulse withstand voltage, Uimp: 12 kV Rated short-time withstand current, Icw: 85 kA / 1 second Rated short-circuit making capacity, Icm: 187 kA peak Utilisation category: AC-23A Standard: IEC 60947-3 Manual Push ON / Push OFF operating mechanism Rear high-current terminal connections Withdrawable cradle/chassis included Schneider identifies reference 48321 as a 3200 A, 690 V, four-pole drawout Masterpact NW32HF switch-disconnector

Condition: new, Year of construction: 2018, functionality: fully functional, nominal power (apparent): 32 kVA, We offer a selection of brand new Schneider Electric components, all in original factory packaging. This equipment is ideal for industrial electrical installations, switchboards, and power distribution systems. Lsdpfx Apswrzl Ssmjaf 🔹 Switch Disconnectors (3P): Schneider MTZ2 25HF - 1 pc Schneider MTZ2 25HA - 4 pc Schneider MTZ2 16HA- 10 pc 🔹 Compact Breaker: Schneider NS630b – 1600 A Compact 16 pc Schneider EF593816 – Front power connections- 16 pc 🔹 Molded Case Circuit Breakers (MCCB): Schneider NW25H2 – 2500 A – 4P Condition: Brand new Packaging: Factory sealed Location: United Kingdomб Leeds Availability: In stock, ready for dispatch Photos, technical datasheets and prices available upon request

Condition: used, Year of construction: 1991, Second-hand machine Year of manufacture: 1991 Features and technical specifications: - designed for all window tooling systems up to a tool diameter of 400 mm - thanks to the standard braking systems (foot brake for the slotted spindle, automatic electronic (Safety brake for the saw) allows the machine to be brought to a halt in just a few seconds - the protective covers for the slotted spindle and cross-cut saw are designed so that the tools can be easily and effortlessly can be replaced without having to remove the hoods themselves – the crosscut saw can be conveniently adjusted from the workstation using a quick-adjustment mechanism. A six-position turret head allows for quick adjustment to different dimensions - the 40 mm slotted spindle can be precisely adjusted in height using a conveniently positioned handwheel with 0.1 mm graduations – the sturdy roller table, in combination with hardened and ground guideways, can be moved easily with minimal effort - Slotted spindle motor: 5.5 kW - Slotted spindle speeds: 3,000/4,500 rpm - Spindle diameter: 40 mm - Clamping length: 140 mm - Slotted spindle height adjustment: 100 mm - Extraction nozzle: 120 mm - Motor for cross-cut saw: 2.2 kW - Speed of cross-cut saw: 2,950 rpm - Saw blade shank: 30 mm Laedpozk Npyjfx Apmjf - Max. saw blade diameter: 400 mm - Max. cutting height: 125 mm - Pneumatic tool clamping – with Festo LAS stop Weight: approx. 600 kg Availability: at short notice Storage location: Röllbach

Condition: good (used), Schneider Senator PL1 Q-600-H Paper Stack Lift This machine is in perfect condition, practically new. Hydraulic drive, state-of-the-art hydraulic unit. 400V power supply. Laedpfx Apeztz D Iemof Automatic and manual lifting cycles, fast operation. Load capacity: 600 kg. Pallet/sheet dimensions: 760 x 1090 mm

Condition: new, Schneider Electric BRS39AHS0033 / VRDM3910/50LHB Lexium BRS stepper motor, serial no.: 2900272775, unused, in opened original packaging, 100% functional, scope of delivery as shown in the photos. Lodpfei D Nvrsx Apmsaf

Condition: new, Schneider Electric BRS39AHS0033 / VRDM3910/50LHB Lexium BRS stepper motor, serial number: 2900272790, unused, in opened original packaging, 100% functional, scope of delivery as shown in the photos. Laodpoi D Nyvofx Apmof

Condition: new, Year of construction: 2022, functionality: fully functional, Manufacturer: Schneider Electric Model: EF593816 Type: Power Connector Block Configuration: 3-Pole (3P) Mounting Type: Front-connected, fixed installation Series: Ecofit Condition: New Availability: In stock 16 pc Product Overview: The Schneider Electric EF593816 is a 3-pole Ecofit power connector designed for front-connected fixed breakers. This compact and robust unit is ideal for integration into low-voltage power distribution systems, particularly in industrial switchboards and control panels. Lodpfjw I Twqox Apmsaf Features: Compact 3-pole connector block Designed for fixed circuit breaker applications Front terminal access for easy installation Engineered for compatibility with Schneider Electric low-voltage breakers Suitable for panel building and retrofit projects Complies with industrial safety and quality standards

Year of construction: 1991, condition: ready for operation (used), The filling line includes (1) Empty Glass Lifter Kettner Presant Super, year of construction: 1990 (2) Rinser Krones Gripstar, year of construction: 1991 (3) Filler Krones FKVCF 110, year of construction: 1991 (4) Natural Corker Bertolaso Delta 416S, year of construction: 1991 (5) Cork Conveyor (6) Wiring Machine Kematec Dratomat 20, year of construction: 1991 (7) Depalletiser Schneider EPA 211, year of construction: 1991 (8) Depalletiser Schneider EPA 505, year of construction: 1991 (9) Capsule Machine Robino Zenith 2-32 Otticoo, year of construction: 1991 (10) Labeller Krones Solomatik 20-8-4, year of construction: 1982 (11) Case Packer Kettner Robot BE3/CT, year of construction: 1990 (12) Paternoster for case transport (13) 2x Case Erector Kettner KAF 2400 F, year of construction: 1996 (14) Capper Kettner HD 2500, year of construction: 1990 (15) Pallet Loader Kettner Pressant Universal, year of construction: 1990 (16) Binder Born HB R 240/430, year of construction: 1990 (17) Pallet Roller Conveyor (18) Roller Conveyor, output: 18,000 bottles/h, with documentation, suitable for champagne botttles, the line has not been used for 10 years. Lodpfok Nm Nrjx Apmjaf

Condition: ready for operation (used), Year of construction: 2008, A CNC-controlled 3D multisensor coordinate measuring machine by Dr. Schneider is available. Design: bridge type, measuring dimensions X/Y/Z: 400mm/400mm/300mm, axis resolution: 0.0001mm, max. traverse speed: 100mm/s, max. acceleration: 4m/s², optical length measurement error: 2+L/300µm, volumetric length measurement error: 2.8+L/300µm, probe head: Renishaw PH10M, touch probe: Renishaw TP200, probe interface: Renishaw PI200. Machine dimensions X/Y/Z: approx. 1200mm/1200mm/2100mm, weight: approx. 600kg. Documentation available. An on-site inspection is possible. Lajdpfx Ajzli Tuopmsf

Condition: ready for operation (used), A Schneider hot-melt perfect binding machine is available. Cover material weight range: 82g-300g/m², max. binding length: 320mm, min. book block dimensions X/Y: 60mm/120mm, max. book block dimensions X/Y: 320mm/300mm, min. cover dimensions X/Y: 330mm/480mm, max. cover dimensions X/Y: 330mm/680mm, book thickness range: 2mm-50mm, max. binding capacity: 300books/h. Machine dimensions X/Y/Z: approx. 1400mm/700mm/1350mm, weight: approx. 250kg. An on-site inspection is possible. Lsdpfxozfp Ilj Apmeaf

Condition: used, Schneider SK D 2 twin-spindle table router for the precise machining of solid wood and wood-based materials, featuring two independently operable router spindles. The machine enables efficient working thanks to the rapid changeover between different milling tools without any changeover times. Ideal for a wide range of milling tasks in window, door and furniture manufacturing. Technical data: - Motor, each: 4.5 kW Ljdpfxozryrzs Apmeaf - Spindle diameter: 30 mm - Spindle centre distance: 600 mm - Speed settings: 3000/4000/5000/6000/8000/10000 - D-89440 Lutzingen, Tel. , Fax: , April 2015, asking price €500 - D-89440 Lutzingen, Tel. , Fax: , May 2015, cost price €1,000

Year of construction: 2000, condition: used, Built in 2000 Capacity single straps up to 40 straps/min Capacity parallel straps up to 20 straps/min Size packaged good width max 600 mm min 180 mm Lsdpec Id Hxsfx Apmsaf Size packaged good height max 350 mm min 10 mm Strap Polypropylenband width 5 mm Thickness min 0,35-0,55 mm Reel bead wire diameter 200 mm Reel external diameter ca.450 mm Width 160/180/200 mm Electric supply 400/50 V/Hz Weight 490 kg (approx.)

Year of construction: 2003, condition: good (used), - Build in 2003 - Type of strapping: Einfach- & Doppelumreifung / single, double strapping - max speed for single strap: bis zu 35 Pakete/min / up to 35 bundles/min - max speed for parallel (double) strap: bis zu 17 Pakete/min / up to 35 bundles/min - min bundle (package) height: ~10 mm - max bundle (package) height: ~450 mm - max weight bundle/package: ~25 kg - Infeed / outfeed (conveying) height: ~850 mm Lsdpsh I Dlljfx Apmsaf - Continuously adjustable conveyor speed - Metric input of strapping position - Type of sealing: heat-weld sealing - Strapping material: PP - No of strap coil dispenser: single - Strap coil dispenser - core diameter: 200 mm - Strap coil dispenser - core width: 190 mm - Equipped with back stop (package stop) - Equipped with hold-down device - Equipped with auto. height detection - Equipped with interface to up-/downstream equipment - Equipped with auto. strap feeding - Equipped with auto. strap end detection - Equipped with auto. strap loop ejection (on "no bundle cycle") - Over all length equipment: ~760 mm - Over all width equipment: ~1540 mm - Over all height equipment: ~1600 mm - Input Power: ~2 kVA - Voltage: 400 V 3Ph, 50/60 Hz - Air requirement: ~8l/cycle 6 bar - Weight: ~415 kg - Optional Equipment: Can be combined with a RO-TRI in-line strapper to form a cross - strapping line - Equipment at Helmstedt, airports: Hannover (~1 hr), Berlin (~2 hrs) - Mechanical / electrical machine test possible - Condition: cleaned & in working conditions - Machine available: upon request - Description: Automatic single, double or multiple strapping of e.g. bundles behind a press bindery stacker. Normally integrated into a complete line for bundles/packages.

Year of construction: 2001, condition: used, Built in 2001 Capacity single straps up to 40 straps/min Capacity parallel straps up to 20 straps/min Capacity cross straps up to 18 straps/min Size packaged good width max 450 mm min 200 mm Size packaged good length max 320 mm min 200 mm Size packaged good diagonal max 560 mm Laodpfx Asc Ift Topmsf Size packaged good width single/parallel max 580 mm min 180 mm Size packaged good height max 400 mm min 10 mm Strap Polypropylenband width 5 mm Thickness min 0,35-0,55 mm Reel bead wire diameter 200 mm Reel external diameter app.450 mm Width 160/180/200 mm Electric supply 400/50 V/Hz Weight 510 kg (approx.) Equipment cross strapping with integrated turn table

Year of construction: 2006, condition: used, Built in 2006 Speed bundles/min 40 Pakete/min Size packaged good width max 340 mm min 150 mm Size packaged good: height max 480 mm min 10 mm Size packaged good: length max 500 mm min 150 mm Ledpfx Apedanl Hemjaf Size packaged good: diagonal max 600 mm Package weight: max 25 kg Electric supply: 400/50 V/Hz Speed: max ca. 24-55 m/min Weight: 150 kg (approx.)

Year of construction: 2004, condition: used, Built in 2004 Capacity single straps up to 40 straps/min Size packaged good width max 580 mm min 180 mm Size packaged good height max 400 mm Lodpfx Apsdiyfrsmoaf min 10 mm Equipment cross strapping machine 2003 HS inline strapping machine 2003 I

Year of construction: 2006, condition: good (used), Built in: 2009 - Type of strapping: single, double, multiple - max speed for single strap: up to 40 bundles/min - max speed for parallel (double) strap: up to 20 bundles/min - min bundle dimensions (w x l): ~180 x 130 mm - max bundle dimensions (w x l): ~580 x 510 mm - min bundle (package) height: ~10 mm - max bundle (package) height: ~400 mm - max weight bundle/package: ~20 kg - Infeed / outfeed (conveying) height: ~800-900 mm - Continuously adjustable conveyor speed - Metric input of strapping position - Type of sealing: Heizkeil-Schweissung / heat-weld sealing - Strapping material: Polypropylen (PP) - No of strap coil dispenser: single - Strap coil dispenser - core diameter: 200 mm - Strap coil dispenser - core width: 160/180/200 mm - Equipped with back stop (package stop) - Equipped with hold-down device - Equipped with interface to up-/downstream equipment - Equipped with auto. strap feeding - Equipped with auto. strap end detection - Equipped with auto. strap loop ejection (on "no bundle cycle") - Over all length equipment: ~650 mm - Over all width equipment: ~1750 mm - Over all height equipment: ~1950 mm - Input Power: ~1,1 kW - Voltage: 400 VAC, 3Ph, N, PE, 50 Hz - Air requirement: ~8 l/Umreifung 6 bar / ~8 l/cycle 6 bar - Weight: ~500 kg - Operator Manual included as print-out on paper - Optional Equipment: Can be combined with a in-line strapping machine to form a cross - strapping line - Equipment at Helmstedt, airports: Hannover (~1 hr), Berlin (~2 hrs) - Mechanical / electrical machine test possible (option) - Condition: cleaned & in working conditions - Machine available: upon request Lajdeh Nuh Sopfx Apmjf Description: Automatic single, double or multiple strapping of e.g. bundles behind a press stacker or a bindery stacker. Normally integrated into a complete packaging line for bundles/packages.

Condition: new, - Type of strapping: single in travel direction - max speed for single strap: up to 30 bundles/min - min bundle dimensions (w x l): ~160 x 130 mm - max bundle dimensions (w x l): ~560 x 480 mm - min bundle (package) height: ~10 mm - max bundle (package) height: ~400 mm - max weight bundle/package: ~25 kg - Infeed / outfeed (conveying) height: 800-900 mm - Continuously adjustable conveyor speed - Metric input of strapping position - Type of sealing: Heizkeil-Schweissung / heat-weld sealing - Strapping material: Polypropylen (PP) - No of strap coil dispenser: einfach / single Laedpfx Apoh Nulcomjf - Strap coil dispenser - core width: 165-210 mm - Equipped with hold-down device - Equipped with interface to up-/downstream equipment - Equipped with auto. strap feeding - Over all length equipment: ~840 mm - Over all width equipment: ~1250 mm - Over all height equipment: ~1750 mm - Input Power: ~0,5 kVA - Voltage: 230 VAC, 1Ph, 50 Hz - Air requirement: 2 l/cycle 6 bar - Weight: ~335 kg - Equipment at Helmstedt, airports: Hannover (~1 hr), Berlin (~2 hrs) - Mechanical / electrical machine test possible (option) - Condition: cleaned & in working conditions - Machine available: upon request Description: Automatic in-line strapping in travel direction without bundle turning behind a press stacker or a bindery stacker. Normally integrated into a complete packaging line for bundles/packages.

Condition: good (used), Year of construction: 2016, Consists of 2 machines 27078f Schneider Ozga SO 2004.1 L-M, strapping machines Machine number: 7476 Built in: 2016 Type of strapping: single in travel direction max speed for single strap: up to 30 bundles/min bundle dimensions (w x l): min ~160 x 130 mm, max ~560 x 480 mm bundle (package) height: min ~10 mm, max ~400 mm weight bundle/package: max ~25 kg Infeed / outfeed (conveying) height: 800-900 mm Continuously adjustable conveyor speed, Metric input of strapping position Laodpfx Apsk D Dvgomof Type of sealing: heat-weld sealing Strapping material: Polypropylen (PP) No of strap coil dispenser: single Strap coil dispenser - core width: 165-210 mm Equipment: hold-down device, interface to up-/downstream equipment, auto. strap feeding Over all length equipment: ~840 mm Over all width equipment: ~1250 mm Over all height equipment: ~1750 mm Input Power: ~0,5 kVA Voltage: 230 VAC, 1Ph, 50 Hz Air requirement: 2 l/cycle, 6 bar Weight: ~335 kg 27078g Schneider Ozga SO 2004.1 L-M, strapping machines Machine number: 7476 Built in: 2016 Type of strapping: single, double, multiple speed for single strap: up to 40 bundles/min speed for parallel (double) strap: up to 20 bundles/min bundle dimensions (w x l): min ~180 x 130 mm, max ~580 x 510 mm bundle (package) height: min ~10 mm, max ~400 mm weight bundle/package: max ~25 kg Infeed / outfeed (conveying) height: 800-900 mm Continuously adjustable conveyor speed, Metric input of strapping position Type of sealing: heat-weld sealing Strapping material: Polypropylen (PP) No of strap coil dispenser: single Strap coil dispenser - core diameter: 200 mm Strap coil dispenser - core width: 160/180/200 mm Equipment: back stop (package stop), hold-down device, interface to up-/downstream equipment Over all length equipment: ~615 mm Over all width equipment: ~1700 mm Over all height equipment: ~1900 mm Input Power: ~1,1 kVA Voltage: 400 VAC, 3Ph, N, PE, 50 Hz Air requirement: 7 l/cycle, 6 bar Weight: ~500 kg

Condition: good (used), Code: 0473 Brand: SCHNEIDER - GERMANY Model: SLK 300 - CE Standard Universal circular saw for cutting large-sized beams, wooden roofs, wooden walls, laminated beams and various applications - CE Standard Automatic workpiece feed with speed variator Blade diameter mm 800 Blade inclination 90 - 30 degrees with display Lodpfx Apjzquw Aemoaf Manual table rotation from 0 to 180° Cutting height at 90 degrees mm 300 Cutting height at 30 degrees mm 150 Cutting width mm 900 Motor power Hp 15 (Kw 11) Automatic raising of the blade with bimanual control Visualizing laser cutting light N° 2 pneumatic cylinders for clamping pieces with wheels Machine cover with manual opening Protection hood for longitudinal cuts Table size 1560 x 1560 mm Table height mm 940 Infeed roller conveyor mm 6000 x 650 Outfeed roller conveyor mm 6000 x 650 N° 2 suction inlets mm 150 Compressed air 7 Atm Overall dimensions of disassembled machine : Machine mm 3200 x 2200 x 2200 h - N° 1 Roller conveyor mm 6000 x 650 x 1050 h - N° 1 Roller conveyor mm 6000 x 650 x 1050 h Weight kg 2200

Condition: used, Year of construction: 1998, cutting width 92 cm feeding depth 92 cm feeding high max. 12 cm Lodozgxchspfx Apmjaf Airtable,

Condition: used, Year of construction: 1999, functionality: fully functional, 5 MVA oil-filled transformer, manufacturer Schneider, year of construction 1999, 20 ± 5% / 10 kV, connection group Yy0; was in operation until 07/2026. Lajdpfx Apozr Ur Aomjf Equipped with an expansion tank, Buchholz relay, air dehumidifier, and dial thermometer.

Condition: new, Year of construction: 2020, functionality: fully functional, machine/vehicle number: ITJ371074, overall weight: 431 kg, total length: 195 mm, total width: 65 mm, total height: 170 mm, space requirement length: 195 mm, space requirement width: 65 mm, space requirement height: 170 mm, operating pressure: 10 bar, pressure (max.): 10 bar, ambient temperature (min.): 5 °C, ambient temperature (max.): 40 °C, protection type (IP code): IP55, Equipment: documentation/manual, refrigerant dryer, type plate available, Schneider Screw Compressor 4152009631 Lsdpjziukyofx Apmeaf - Durable, V-belt driven compressor units - Motor and compressor protection against overheating - With integrated refrigerant dryer / ready-to-use system - Compact dimensions - Low noise due to sound-insulated housing - Integrated direction of rotation control The machine was purchased as a spare unit in 2020 and is new and has not been used. The machine was never used in production and was only stored. The machine is being sold as part of the liquidation of our carpentry business. Collection price - delivery possible upon request. The sale is made with the exclusion of any warranty for defects. Liability for intent, gross negligence, and damages resulting from injury to life, body, or health remains unaffected. Claims for defects that were fraudulently concealed also remain unaffected. An inspection of the machine is possible by arrangement. Fixed inspection dates on July 18th or August 1st from 10 a.m. to 2 p.m. at our premises in Stemwede.