Used Pipe Center for sale (15,788)

Condition: reconditioned (used), Year of construction: 2014, Immediately Available: Traveling Column Machine FS 2100 • Total travel in X axis: 21,000 mm – ideal for flexible large-part machining • Travel distances: X = 21,000 mm, Y = 1,500 mm, Z = 3,500 mm • iTNC 530 control with wireless HR 550 FS handwheel, operator cabin on the traveling column • 2-axis NC universal drilling/milling head, fully simultaneous and positioning mode per traveling column • Spindle HSK-A 100, 10,000 rpm, 220 Nm spindle torque • ICS air up to 6 bar • Dust protection packages for the safeguarding of guideways and drives Laedpozmp Eyjfx Aftod • BA 4 per traveling column • Wireless probe RMP 60 by Renishaw • Work area monitoring with network camera and monitor located on the rear of the system • Process monitoring with ToolScope basic system • Additional control panel on the rear of the system • Partial enclosure of the working area and sheet metal door, rear side equipped with a safety fence for unobstructed view into the work area • Including fixators • Cooling aggregates • Including internal tool cooling (closed-loop system) with cooling unit • Short delivery time, immediately available – subject to prior sale – Inspection possible by appointment Spindle hours: approx. 9,079 SPECIAL PRICE!

Condition: reconditioned (used), Year of construction: 2014, Immediately available: Traveling column machine FS 1200 • Total travel X=12,000 mm, ideal for flexible large-scale machining • Travel X=12,000 mm, Y=1,500 mm; Z=3500mm • Control iTNC 530 with wireless radio handwheel HR 550 FS, operator cabin on the traveling column • 2-axis NC universal drilling, milling head, fully simultaneous and positioning operation per traveling column • Spindle HSK-A 100, 10,000 rpm, 220 Nm spindle torque • IKZ air up to 6 bar • Dust protection packages to protect the guides and drives Lajdpfx Aszmp Emjfted • BA 4 per traveling column • Radio measuring probe RMP 60, Renishaw make • Work area monitoring with network camera and monitor on the back of the system • Process monitoring ToolScope basic system • Additional control panel on the back of the system • Partial housing consisting of work area and sheet metal door, back with protective fence with a clear view into the work area • incl. fixators • Cooling units • incl. internal tool cooling (closed cooling circuit) with Cooling unit • short delivery time, available immediately, ---subject to prior sale--- Viewing possible by arrangement Spindle hours: approx. 9079 SPECIAL PRICE!

Condition: like new (used), Year of construction: 2022, operating hours: 19,220 h, functionality: fully functional, Upon request, you will receive the extensive photo collection of the machine. Laodpjzmn Adsfx Afted Upon further inquiry, video recordings of the machine in full working order will also be provided. Manufacturer: HELLER Model: CP 6000 Year of manufacture: 2022 Machine type: Horizontal 5-axis milling-turning center Control system: Siemens SINUMERIK 840D sl Tool interface: HSK-T 100 Technical data: Travel in X-axis: 1,000 mm Travel in Y-axis: 1,000 mm Travel in Z-axis: 1,300 mm Pallet size: 630 x 630 mm Max. pallet load: approx. 1,400 kg Max. workpiece diameter: 1,000 mm Max. workpiece diameter with limited Z-axis travel: 1,580 mm Max. workpiece height: 1,200 mm Number of axes: 5 Machining: 5-sided and 5-axis simultaneous machining Turning machining: horizontal, vertical and angled Rotary table: directly driven torque rotary table Rotary table axis: 360° continuous Pallet changer: integrated, automatic Spindle: Spindle design: PCU 100 PowerCuttingUniversal Tool interface: HSK-T 100 Max. spindle speed: approx. 8,000 rpm Max. spindle power: approx. 60 kW Max. torque: approx. 1,146 Nm Spindle lock for turning machining Swivel range of the spindle head: approx. +15° to -190° Tool magazine: Tool positions: 340 Max. tool diameter: approx. 280 mm with free adjacent positions Max. tool length: approx. 600 mm Max. tool weight: approx. 25 kg Automatic tool changer Equipment: Siemens SINUMERIK 840D sl CNC control system Integrated pallet changer 5-axis simultaneous machining Milling, drilling, threading and turning machining Directly driven torque rotary table KNOLL coolant and filter system Chip conveyor Mobile chip container Work area and/or oil mist extraction Work area flushing Separate operator and operating data terminals Dimensions of the base machine: Length: approx. 7,750 mm Width: approx. 5,450 mm Height: approx. 4,400 mm Brief description: Universal horizontal 5-axis milling-turning center for complete machining of complex workpieces in a single setup. The HELLER CP 6000 enables powerful milling, drilling and turning operations as well as horizontal, vertical and angled turning machining. Equipped with Siemens SINUMERIK 840D sl, HSK-T-100 spindle, directly driven torque rotary table, integrated pallet changer and KNOLL coolant and chip handling system. All technical data are approximate and non-binding. Subject to errors, changes and prior sale.

Condition: good (used), Year of construction: 2005, functionality: fully functional, Cotrol system Fanuc 21iB. Lasdsyk D R Tspfx Afted Probe Marposs T36. X ... 1200 mm Y ... 600 mm Z ... 640 mm Table ... 1300x620 mm Max. table loading ... 800 kg Taper in spindle ... ISO 40 Spindle revolutions ... 50 - 8000 rpm Number of tools in tool changer ... 24 ks Machine dimensions ... 2001 x 3641 x 3158 mm Weight ... 7000 kg

Condition: excellent (used), Year of construction: 2012, Machine in very good condition, worked very little. Spindle Taper #40 Spindle RPM 8000 Tool Magazine 16 Table Length 750 mm Table Width 400 mm X Travel 610 mm Lajdezf Aq Hspfx Aftsd Y Travel 400 mm Z Travel 460 mm Multi-Axis 3 Control FANUC

Condition: like new (used), Year of construction: 2022, operating hours: 4,747 h, functionality: fully functional, machine/vehicle number: 329760, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, This machine can still be inspected while powered on at the factory. It has very few operating hours and is in like-new condition. Lasdpfxjzn A Haj Aftod Used CNC vertical machining center, Manufacturer: MAZAK Model: VCN 530 C SmoothG Machine number: 329760 Operating hours: 4747 The tools, fixtures, and vise are not included in the scope of delivery. You will find the order confirmation and machine specifications in the attachment.

Condition: used, Year of construction: 2011, travel -x axis 650 mm travel -y axis 600 mm travel -z axis 500 mm control HEIDENHAIN - iTNC 530 number of spindle speeds 18.000 U/min NC rotary indexing table Ø 630 mm numbers of positions in the tool changer 32 tool taper SK 40 5-axis simultaneous machining center | HERMLE - C 30 U equipped with ITC (80 bar), NC swivel rotary table, tool changer & chip conveyor. The machine has only 13.924 H spindle hours. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. Laedpfszczhaex Aftsd - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: C30U | C-30U | C-30 U

Condition: used, Year of construction: 2007, travel -x axis 650 mm travel -y axis 600 mm travel -z axis 500 mm control HEIDENHAIN - iTNC 530 number of spindle speeds 10.000 U/min NC rotary indexing table Ø 630 mm numbers of positions in the tool changer 32 Lasdpfx Afjzaf Husted tool taper SK 40 5-axis simultaneous machining center | HERMLE - C 30 U equipped with ITC (80 bar), NC swivel rotary table, tool changer & chip conveyor. The Z-axis motor was replaced in 2025, and the spindle was already replaced in 2015 at 7,100 operating hours. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: C30U | C-30U | C-30 U

Condition: used, Year of construction: 2007, turning diameter 65 mm turning length 150 mm control Siemens 840D spindle passage 75 mm turning length 150 mm c-axis 2x 0,001 ° gripping station 65 mm speeds 5000 U/min rapid traverse 30 m/min turret (x-stations) 3x12 Number of axles 10 St. number of toolholder-holes 36 chip conveyor ja / yes kW coolant filtering unit ja / yes kW Number of working hours 35000 h total power requirement 22 kW weight of the machine ca. 9 t Laodpfx Afezdk Evetsd dimensions of the machine ca. 4,4 x 2 x 2,3 + Iemca m DMG Sprint 64 Linear CNC lathe, built in 2007, 10 axes, 2 spindles, 3 turrets with Iemca Master 880 loading magazine Accessories: a large number of tool holders in total 104 off, 24 of them are driven tool holder

Condition: used, Year of construction: 2014, operating hours: 3,600 h, functionality: unexamined, Agie Charmilles / Mikron VCE 1600 Pro CNC machining center Manufacturer: Type: VCE 1600 Pro Lajdpjzmh Nqofx Aftod Year of manufacture: 2014 Operating hours: see photos Further information available upon request.

Condition: good (used), Year of construction: 2004, operating hours: 6,900 h, functionality: fully functional, Controller: ULTIMAX4 DSM with LCD screens Table dimensions: 762 x 355 mm X-axis travel: 660 mm Y-axis travel: 355 mm Z-axis travel: 455 mm Spindle speed: 10 – 10000 rpm Spindle taper: SK40 Tool changer: 16-station Main drive power: 11 / 9.4 kW Machine weight: 2800 kg Machine dimensions: 1800 x 1600 x 2500 mm Accessories: - Software version 2.37 with English user interface - Software options: Rigid tapping, Pockets/Islands, AVC, Helical/Ramp, ULTINET (Network) - Coolant system - Signal lamp - USB interface Ljdpozmhy Ajfx Aftead - Portable electronic handwheel - Machine feet The machine is in good used condition. Still under power. It is being sold due to company liquidation.

Condition: good (used), Year of construction: 2006, functionality: fully functional, This is a highly rigid and fast machine built on sliding guides (solid box ways), characterized by its precision and Japanese mechanical stability. Work area and travels: * Pallet dimensions (2 pallets as standard – APC): 400 × 400 mm * Travel in the X-axis: 610 to 735 mm (depending on the specific modification/submodel, e.g., the iF version has a longer travel) * Travel in the Y-axis: 610 mm Lodpjznxh Hefx Aftoad * Travel in the Z-axis: 610 mm * B-axis (rotary table): Full-fledged 4th axis, indexing in 0.001° increments * Maximum pallet load: 400 kg * Max. workpiece dimensions: approx. Ø 630 mm × height 745 mm Spindle: * Spindle taper: BT 40 / CAT 40 * Spindle speed: standard 13,000 to 15,000 rpm (depending on the type of gearbox/direct drive installed as standard) * Spindle motor power: approx. 22 kW (30 HP) Tool changer (ATC): * Magazine capacity: 50 tools as standard (optionally up to 100/150 positions) * Tool change time (tool-to-tool): approx. 1.0 to 1.3 seconds * Max. tool weight: 10 kg Rapid traverses and dynamics: * Rapid traverses in the X, Y, Z axes: 60 m/min (or 50 m/min in some older versions) * Guides: Hardened sliding guides (Box Ways) for maximum rigidity during heavy machining. Machine dimensions and weight: * Required footprint (W × D): approx. 3.1 × 4.1 m * Machine weight: approximately 9,800 to 13,000 kg (net machine weight).

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Year of manufacture: 12/2008 Control system: FANUC Series 31i-Model A5 Spindle taper: BT30 Tool magazine: 21 positions Machine weight: 2,100 kg Lajdpsznw Thefx Aftsd Power supply: 3-phase, 200/220 V, 50/60 Hz Power consumption: 10 kVA CE marking: yes Country of origin: Japan Travel and working ranges X-axis travel: 500 mm Y-axis travel: 400 mm Z-axis travel: 330 mm Rapid traverse X/Y/Z: up to 54 m/min Max. spindle speed: up to 24,000 rpm (as per nameplate) Max. table load: 300 kg Included accessories The machine includes approximately 50 collets of various sizes. The rotary table / 4th axis located in the machine is not included in the sale.

Condition: refurbished (used), functionality: fully functional, 5-axis HSC milling machine Röders RXP500DS with linear direct drives in all axes and torque drives in the rotary axes. The machine will be completely overhauled, inspected, and measured in our workshop. The machine will once again meet new machine tolerances! Ljdpfszmgt Iox Aftoad Travel ranges: X450mm, Y400mm, Z240mm Distance spindle/table: approx. 315mm - Linear direct drives in all axes - wear-free - Tool changer, 42-position - Cooling unit for drives, milling spindle, and control cabinet - Measuring laser for fully automatic measurement of milling tools (length/diameter/contour/taper angle) as well as wear monitoring including tool cleaning before measurement - Handbox - Remote maintenance - Automatic 3D probe including calibration sphere in the tool changer - Minimum quantity lubrication - Emulsion cooling - Spindle HSK40E with max. 42,000 rpm - Spindle length compensation - Zero-point clamping system EROWA integrated into the machine table - Manual chuck control - Automation RC2 pallet changer for 45 Erowa ITS50 pallets - ideal for the production of electrodes An inspection of the machine in operational condition is possible at any time. You can also find information about the type and scope of our overhauled machines on our website or on our Hüttmann YouTube channel.

Condition: as good as new (ex-display), travel distance X-axis: 800 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 800 mm, Equipment: chip conveyor, YCM NH500A - demonstration machine - unused!! Control: Fanuc MXP300FB Spindle: 15,000 rpm / 244 Nm BBT40/SK40 Tool changer: 60-way Switch table Coolant system with 70 bar IKZ 3D probe Laedevvudwspfx Aftod Blum tool breakage control Glass scales Chip conveyor The machine is located at our location in Soltau and can be inspected at any time.

Condition: as good as new (ex-display), functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, controller model: Heidenhain, rotational speed (max.): 12,000 rpm, Vertical machining center YCM NXV600A - demonstration machine Control: Heidenhain TNC620 Spindle: 12,000 rpm SK40 17kW Coolant system with IKZ20 bar Handwheel Laedsvvuh Aepfx Aftod Tool changer: 24-way Chip conveyor The machine is located at our location in Soltau and can be viewed in operation at any time!

Condition: good (used), Year of construction: 2009, functionality: fully functional, turning length: 660 mm, turning diameter: 340 mm, spindle speed (max.): 400 rpm, spindle bore: 86 mm, travel distance X-axis: 245 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 710 mm, rapid traverse X-axis: 16,000 m/min, rapid traverse Y-axis: 16,000 m/min, rapid traverse Z-axis: 20,000 m/min, rotational speed (max.): 4,000 rpm, spindle nose: JIS A2-6, Number of stations: 12-station rotary tool turret (all stations suitable for powered tools) Tool holder: Square 25 mm / Drill shank max. ø 40 mm Switching time (station to station): approx. 0.35 seconds Ledpfx Afezmfxpjtsad Speed of powered tools: Max. 4,000 rpm Drive power of powered tools: 5.5 kW Control: FANUC Series 18i-TB Machine weight: approx. 6,500 kg x, z, c, y, a-axis Bar loader Chip conveyor The machine is in very good condition and is immediately available. We can also deliver and install the machine for you. We offer you a comprehensive, hassle-free package. Note: We offer flexible financing solutions for all machines as well as a professional relocation service. Disassembly, transport, and professional installation – all from a single source. Billing based on individual terms and conditions and duration. Contact us for your personal offer.

Condition: reconditioned (used), Year of construction: 2017, functionality: fully functional, Equipped with DMG MORI M730 UM MAPPS CELOS control system. Year of manufacture: 10/2017, Commissioned: 1/2018 Turning diameter: 356 mm Travel in X: 260 mm Travel in Z: 795 mm Travel in Y: +- 50 mm Spindle bore: 91 mm Main spindle speed range: 4000 rpm Counter spindle speed range: 4500 rpm Driven tool speed range: 10000 rpm Including the following accessories: Work area door with interior lighting 20-position turret with 20 driven stations C-axis, Y-axis Touch probe (Marposs) Counter spindle, parts catcher Workpiece conveyor, workpiece unloader Manual tool presetter (HS) Removable tool presetter (GS) 3-jaw chuck, hydraulic, Kitagawa BB 210 with foot pedal (HS) 3-jaw chuck, hydraulic, Kitagawa B 208 with foot pedal (GS) Bar loader IRCO BREUNING ILS - MUK Various tool holders, 0-40 mm Direct path measuring system, X, Y, Z axes Signal lamp, 4-color Chip conveyor High-pressure coolant system with compact filter unit, 70 bar / 700 l tank Ledpfx Aezmfxioftjad Operating manuals

Condition: good (used), Year of construction: 2022, functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, Hedelius Acura 65 Marathon, Year of manufacture 2022, Control system Heidenhain TNC 640, Horizontal travel X/Y/Z 700/650/650 mm, Vertical travel X/Y/Z 465/465/379 mm, 2-axis NC swivel table – rotary table 400 x 400 mm, Tool changer, 60 positions, Additional magazine, 180 positions, Spindle speed up to 14,000 rpm, Tool holder SK 40, Water-cooled milling spindle, Water-cooled A + C axes, 22-position pallet system, 15 pallets available, Pallet size 400 x 400 x 38 mm, Zero-point clamping system, Pallet storage system MARATHON P422, 5-axis simultaneous machining ACURA, Kinematics option, Formingstar package, Accuracy package for Z-axis, Internal compressed air supply, Sloping bed band filter system, Internal coolant supply 25 bar, Pressure booster pump 50 bar, Pre-filter for sloping bed band filter system, Exhaust air filter LTA 3001, Extended chip flushing system, 30-infrared measuring probe M&H, Laser control system, 50 spindle hours since last maintenance. Lodpjznvbqofx Aftead

Condition: as good as new (ex-display), functionality: fully functional, Tube bending machine TUBEND TB 42 incl. 3 sets of tools -CE marking Ledpfx Aoznu Sbjftead -Bending range 42x3mm -Hydraulic drive -Manually adjustable angle switch -Digital display -Adjustable stroke -Emergency stop function -Three sets of tools: 33.7 mm / 26.9 mm / 21.3 mm -Documentation -400 Volt connection Dimensions: L x W x H 1.1 x 0.7 x 1.5 meters / Weight approx. 500 kg Errors and omissions excepted.

Condition: excellent (used), Year of construction: 2019, operating hours: 2,100 h, functionality: fully functional, turning length: 3,028 mm, turning diameter over cross slide: 690 mm, turning diameter: 650 mm, spindle bore: 166 mm, DOOSAN PUMA 5100 XLMB CNC LATHE FANUC CONTROL 32i B YEAR 11/2019 , INSTALLED 2020 SWING OVER BED 900 MM SWING OVER SADDLE 690 MM Lajdpfxjznu Dqj Aftsd MAX TURNING LENGTH 3028 MAX TURNING DIA 650 MM HYD CHUCK 550 MM DIA X 362 Z 3150 C 360 INDEXING 0.001 12 STATION TURRET BORING BAR 60 MM MAX RPM 1500 BAR CAPPACITY 166.37 MM TAILSTOCK - QUILL 120 DIA - NO 6 MT LIVE TOOLING SWARF CONVEYOR TOOL PRESETTER COOLANT SYSTEM HYD STEADY IS THERE BUT NOT FITTED TO MACHINE FULL LOAD 82 AMPS NETT WEIGHT 13.2 TON

Condition: excellent (used), Working travels 1020 x 530 x 560 mm Table size 1200 x 500 mm Spindle taper BT40 Spindle speeds -12'000 rpm Lsdozmdd Dspfx Aftead Tool changer 32 Pos. Control FANUC 0i-MC With cooling through spindle With chip conveyor Misc.accessories MARCELS MASCHINEN CH

Condition: good (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 700 mm, Hedelius Acura 85, Year of manufacture 2021, Heidenhain TNC 640 control system, Horizontal travel X/Y/Z 900/850/700 mm, Vertical travel X/Y/Z 900/600/700 mm, 2-axis NC swivel/rotary table 850 x 750 mm, Swivel range +30° / -155°, Spindle speed up to 14,000 rpm, SK 40, 80x taper, 5-axis simultaneous machining, 3D Forming Star package, Kinematic option, Accuracy package for Z-axis, Axis temperature compensation, Extended coolant system, Electric handwheel, Ljdpfxsznuc To Aftead Internal compressed air supply, Band filter system 900 liters, IKZ 25 / 50 bar, 3D measuring probe.

Condition: not inspected (used), Year of construction: 2000, travel distance X-axis: 610 mm, travel distance Y-axis: 405 mm, travel distance Z-axis: 510 mm, overall weight: 4,000 kg, spindle speed (max.): 8,000 rpm, Ultimax control system Laodpey T Ekbefx Afted Table: 760 x 400 mm Travel: 610 x 405 x 510 mm Tool changer: 24 tools Maximum spindle speed: 8,000 rpm Weight: 4,000 kg

Condition: used, Year of construction: 2004, operating hours: 20,000 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 500 mm, feed length X-axis: 600 mm, feed length Y-axis: 560 mm, feed length Z-axis: 500 mm, controller manufacturer: Siemens, spindle nose: DIN 40, number of slots in tool magazine: 180, Equipment: chip conveyor, documentation/manual, DECKEL MAHO DMC 60 H – 4-Axis Horizontal Machining Centre – 2004 Siemens CNC – 6 pallets – 180 tools – 20,000 hours A company in the aerospace sector is selling a DECKEL MAHO DMC 60 H 4-axis horizontal machining centre, year 2004, currently available for inspection under power and in production. Specifications: • CNC control: Siemens • Travels: X 600 / Y 560 / Z 500 mm • Tool magazine: 180 tools • Taper: DIN 40 • 6 pallets • Through-spindle coolant • Tool probe • Workpiece probe • Chip conveyor • Complete documentation • Low hours: only 20,000 hours • Visible under power and in production • Currently machining aerospace components Laedey D A Rgopfx Aftjd • Test possible by appointment If you have any questions or need further information, please feel free to send us a message or call.