Used Pipe Benders for sale (3,113)

Condition: as good as new (ex-display), Year of construction: 2023, I - beam section - flat steel 120 x 15 (d 750) mm I-beam section - upend 60 x 10 (d 800) mm L-beam 50 x 5 (d 1200) mm round material 35,0 (d 800) mm bar material dia. max. 70 x 2 (d 1200) mm square material 50 x 40 x 3 mm bending speed 4,3 m/min roll diam. toproll 155 mm bore 50,0 mm total power requirement 1,5 kW weight 320 kg range L-W-H 730 x 830 x 1350 mm Exhibition machine from 2023 with only approx. 2x operating hours Condition as NEW Special price on request Equipment: - robust electro-motorized ring/profile bending machine - machine base frame, with rear shelf - horizontal and vertical work possible - 1x freely movable foot switch - segmented standard rollers (divided) - 2x motor-driven rollers - manual delivery of the top roller - analog position display of the top rollers (scale) - manually adjustable side/straightening rollers - CE mark / declaration of conformity - operating instructions in German Nedpfjxcui Aex Ahvscn

Condition: as good as new (ex-display), Year of construction: 2023, I - beam section - flat steel 120 x 15 (d 750) mm I-beam section - upend 60 x 10 (d 800) mm L-beam 50 x 5 (d 1200) mm Nedpjxcuivjfx Ahvscn round material 35,0 (d 800) mm bar material dia. max. 70 x 2 (d 1200) mm square material 50 x 40 x 3 mm bending speed 4,3 m/min roll diam. toproll 155 mm bore 50,0 mm total power requirement 1,5 kW weight 320 kg range L-W-H 730 x 830 x 1350 mm Exhibition machine from 2023 with only approx. 2x operating hours Condition as NEW Special price on request Equipment: - robust electro-motorized ring/profile bending machine - machine base frame, with rear shelf - horizontal and vertical work possible - 1x freely movable foot switch - segmented standard rollers (divided) - 2x motor-driven rollers - manual delivery of the top roller - analog position display of the top rollers (scale) - manually adjustable side/straightening rollers - CE mark / declaration of conformity - operating instructions in German

Condition: as good as new (ex-display), Year of construction: 2021, L-beam 40 x 5.0 (d 500) mm I - beam section - flat steel 80 x 15 (d 700) mm I-beam section - upend 50 x 10 (d 800) mm round material 30.0 (d 700) mm bar material dia. max. 60 x 2 (d 1200) mm square material 50 x 30 x 3 mm range L-W-H 670 x 530 x 1350 mm weight 185 kg total power requirement 0.75 kW Exhibition machine from 2021 with only approx. 2x operating hours Condition as NEW Special price on request Equipment: - robust electro-motorized ring/profile bending machine - horizontal and vertical work possible * Machine head can be folded 90° - 1x freely movable foot switch - segmented standard rollers (divided) - 2x motor-driven rollers - manual delivery of the top roller - analog position display of the top rollers (scale) - manually adjustable side/straightening rollers - CE mark / declaration of conformity - Operating instructions in German Ncedpfxsxcui Ns Ahvon

Condition: as good as new (ex-display), Year of construction: 2021, L-beam 40 x 5.0 (d 500) mm I - beam section - flat steel 80 x 15 (d 700) mm I-beam section - upend 50 x 10 (d 800) mm round material 30.0 (d 700) mm bar material dia. max. 60 x 2 (d 1200) mm square material 50 x 30 x 3 mm range L-W-H 670 x 530 x 1350 mm weight 185 kg total power requirement 0.75 kW Exhibition machine from 2021 with only approx. 2x operating hours Condition as NEW Special price on request Equipment: - robust electro-motorized ring/profile bending machine - horizontal and vertical work possible * Machine head can be folded 90° Nodpfx Asxcukajhvjcn - 1x freely movable foot switch - segmented standard rollers (divided) - 2x motor-driven rollers - manual delivery of the top roller - analog position display of the top rollers (scale) - manually adjustable side/straightening rollers - CE mark / declaration of conformity - Operating instructions in German

Condition: as good as new (ex-display), Year of construction: 2025, I - beam section - flat steel 80 x 20 (d 1200) mm I-beam section - upend 80 x 25 (d 2100) mm L-beam 50 x 50 x 6 (d 1000) mm bar material - diameter 40.0 (d 800) mm square material 60x60x3 ( d 4000 ) mm rectangle 80x30x3 ( d 6000 ) mm roll surface width 177x60 (18x5 Nut) mm bar material dia. max. 70 x 2.0 (d 1600) mm tool adaptor 60.0 mm turning speeds 6.4 m/min. oil volume 80.0 Liter total power requirement 4.75 kW Ncodpfexcuipex Ahvon weight 1080 kg range L-W-H 940 x 1260 x 1390 mm Exhibition machine from 2025 with only approx. 2x operating hours Condition as NEW Special price on request Equipment: - electro-hydraulic ring/profile bending machine - hydraulic bottom/side roller adjustment * for extra small bending radii - bottom/side roller can be adjusted individually - 3x driven rollers - divided roller segments - digital position display of the bottom/side rollers * Display with touchscreen function - hardened tool holder (42CrMo4) - machine base - 2x manually adjustable side guides - horizontal and vertical work possible - freely movable control panel - pressure gauge / pressure display for the rollers - CE mark / declaration of conformity - operating instructions in German

Condition: as good as new (ex-display), Year of construction: 2025, I - beam section - flat steel 80 x 16 (d 1200) mm I-beam section - upend 50 x 15 (d 1000) mm L-beam 50 x 5 (d 1200) mm round material 40.0 (d 800) mm bar material dia. max. 70 x 2.0 (d 1600 ) mm square material 80x30x3 (d 4000) mm channels - flange UNP 80 (d 800 ) mm bending speed 4.4 m/min roll diam. toproll 157 mm bore 50.0 mm oil volume 18.0 Liter Ncsdpfxsxabr So Ahvon total power requirement 1.1 kW weight 485 kg Exhibition machine from 2025 with only approx. 2x operating hours Condition as NEW Special price on request Equipment: - electro-hydraulic ring/profile bending machine - hydraulic bottom/side roller adjustment * for extra small bending radii - bottom/side roller can be adjusted individually - 3x driven rollers - divided roller segments - digital position display of the bottom/side rollers * Display with touchscreen function - hardened tool holder (42CrMo4) - machine base - 2x manually adjustable side guides - horizontal and vertical work possible - freely movable control panel - pressure gauge / pressure display for the rollers - CE mark / declaration of conformity - operating instructions in German

Condition: new, tube diameter 1/2 - 2.0 Zoll wall strength 2.75 - 4.5 mm ST pressure 10.0 t weight of the machine ca. 46.0 kg With a hinged bending frame for efficient work - Various bending dies included - Universally applicable for gas, boiler, and water pipes - Fast work thanks to rapid feed - With a tripod stand for safe work - Also ideal for copper and coated pipes - Bends up to 90° can be created Ncsdpfexaac Nox Ahvsn Features: - Bending dies: ½" - ¾" - 1" - 1 ¼" - 1 ½" - 2"

Condition: new, tube diameter 33,7 x 3,4 GAS mm tube diameter 35,0 x 2,5 STAHL mm tube diameter 35,0 x 1,5 EDELST mm bending radius min. R10 - R 190 mm Ncsdpfsxab E Ssx Ahven bending angle max. 0 - 180 ° tool taper 6-kant 40 mm voltage 230 V total power requirement 0,9 kW weight of the machine ca. 23,0 kg Description: - MediBender "070" digital - with maximum bending performance for 35 x 2.5 mm steel tubes - Excellent bending quality with very tight bending radii . (from 2 x tube diameter) and bending angles between 0° and 180° - Easy to operate - High accuracy and reliability - Fast tool changes (within seconds) - Easy to transport - Huge selection of affordable standard tools (metric, gas inch, inch) BENDING SEGMENT AVAILABLE FOR AN ADDITIONAL CHARGE

Condition: new, tube diameter 42.0 mm Stahl wall strength 3.0 mm Stahl tube diameter 54.0 mm CU/Alu bar material - diameter 30.0 mm wall strength 2.0 mm revolutions per minute 2.0 U/min voltage 230 Volt total power requirement 1.1 kW weight 80.0 kg range L-W-H 410 x 1000 x 570 mm ERCOLINA MediBender "MB 42 M" Ncodpfx Ahexaa Sdjven - Capacity steel pipe 42 x 3.0mm - Capacity gas pipe 1“1/4 gas x 3.5 mm - Capacity square profile (FE 42) 35 x 35 x 3 mm - Max. bending radius 10-260 mm - Minimum radius 2 x D - 6-edge tool holder - Min. outside diameter 5 mm - 1/8“ gas Equipment: - patented fast tool change system - one bending speed - freely movable foot switch - bending tools on request for an additional charge including ERCOLINA microprocessor control: - with 30 programs each program with up to 9 bending angles programmable - in addition, the necessary correction angles can be entered . for each bending angle in the working mode BENDING SEGMENT AVAILABLE FOR AN ADDITIONAL CHARGE

Condition: good (used), screw clamps, pipe clamps, pipe fastening, hose clamps, line clamps -Manufacturer: Norma, pipe clamps 250 pieces -Type: RSGU 11/15 D1 W1 -Clamping range: 11 mm -Band width: 15 mm -Quantity: 3x bags with 250 pieces available Ncedpjv Awcpsfx Ahvsn -Price: per bag -Bag dimensions: H60 mm -Weight: 2.5 kg/cart.

Condition: used, Pipe gripper, round gripper, laying tongs, round material gripper, scissor gripper, pipe laying device -Manufacturer: Siegert, round material gripper round pliers type RZ -Gripping range: 50 to 250 mm Nodpfx Ahorkp Nqevjcn -Load capacity: 250kg -Dimension: 630/250/H450 mm -Town weight: 11 kg

Condition: good (used), Screws, hexagon head screws, socket head cap screws, Allen head screws -Pipe clamps: Two-part pipe clamp according to DIN 3567 -Type: DN400 / d1 = 406.4mm / 16" -Material: ST37-2 -Connecting elements: can be supplied for an additional charge -Number: 40 sets -Price: per set -Dimensions: 570/220/H70 mm Ncedpfxoiqy Ths Ahven -Weight: 8 kg/set

Condition: used, Flange connection, V-flange, pipe coupling, welding reduction, reduction, clapper base, pipe bend, welding bend, pipe angle -Pipe elbow: welding elbow 90° 44 pieces Ncsdpfxoq N E Rfo Ahvon -Type: 13 different versions, see photos/parts list -Price/tax: complete -Stock: other sizes/types also available, please inquire -Transport dimensions: 1200/800/H400 mm -Weight: 250 kg

Condition: used, Pipe grabs, round grabs, laying tongs, round material grabs, scissor grabs Ncedpfxolyvdys Ahven -Pipe grab: unfortunately without type designation -Pipe diameter: approx. 400 to 750 mm, see photos -Dimension: 930/470/H1140 mm -Own weight: 124 kg

Condition: good (used), Clamping device, clamp bracket, clamp clamp, clamping bracket, pipe clamp bracket, pipe clamp, pipe clamping system, mounting device for pipes, pipe quick clamp, pipe quick clamp -Pipe clamp: pipe quick release -Clamping range: Ø 40 to 180 mm, see photos -Dimensions: 230/120/H310 mm Nodpow Upx Refx Ahvocn -Weight: 3.5 kg

Condition: good (used), Clamping devices, clamping brackets, clamping clamps, clamping brackets, pipe clamps, pipe clamps, pipe clamping systems, mounting devices for pipes, quick-release pipe clamps, pipe quick-release clamps Njdpfx Aow Upy Ujhvscn -Pipe clamping bracket: Pipe quick-release clamp -Clamping range: Ø 25 to 180 mm, see photos -Number: 3x tensioning brackets available -Price: per piece -Dimensions: 160/100/H270 mm -Weight: 3.5 kg/piece

Condition: used, flange connection, V-flange, pipe coupling, weld reduction, reduction, bobbin bottom, pipe bend, welding bend, pipe angle Nodpotxkv Ssfx Ahvjcn -Pipe bend: welding bend 90° 2 pieces -Type: EN10253-1 S235 Ø 139.7 mm -Price/Delivery: complete -Stock: other sizes/types also available, please ask -Dimensions:370/170/H140 mm -Weight: 4 kg/piece

Condition: used, Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 2 pieces -Profile diameter: 65/49 mm -Recording: dimensions see photos -Price: complete Nedpfx Ajf Nrp Tjhvscn -Dimensions: 195/400/H220 mm -Weight: 42.7 kg

Condition: good (used), Pipe sealing bag, leak sealing bag, sealing plate, pipe sealing -Pipe sealing cushions Nsdpfx Ahed Tfqzevscn -Outer/inner diameter: 300/210 mm -Height: 34 mm -Number: 4x pillows available -Price: per piece -Weight: 3.6 kg/piece

Condition: good (used), Pipe sealing bags, leak sealing bags, sealing plates, pipe seals, shut-off rings -Pipe sealing cushions: DN1200 -Diameter: 1180 mm -Dimensions: 1180 x 500 mm Nodpfob A Iuuox Ahvecn -Weight: 140 kg

Condition: used, Flange connection, V-flange, sockets, double nipples, pipe coupling, angle screw connection -Sleeves/double nipples: 1 to 3" 211 pieces -Type: 23 different versions, see photos/parts list -Price/tax: complete -Stock: other sizes/types also available, please inquire -Transport dimensions: 1200/800/H200 mm Nodpfx Ajq N E N Tohvjcn -Weight: 183kg

Condition: good (used), Screw clamps, pipe clamps, pipe fixings, hose clamps, cable clamps -Manufacturer: Norma, pipe clamps, 100 pieces -Type: Ø26x15 MM W1D -Clamping range: 26 mm Ncsdpfxjv Awf Dj Ahvsn -Band width: 15 mm -Quantity: 7 bags of 100 pieces each available -Price: per bag -Bag dimensions: 400/300/H60 mm -Weight: 1.9 kg/bag

Condition: good (used), screw clamps, pipe clamps, pipe fastening, hose clamps, line clamps -Manufacturer: Norma, pipe clamps 33 pieces -Type: RSGU 8/15 -Clamping range: 8 mm Nodpfx Aov Awicjhvscn -Band width: 15 mm -Price/Delivery: complete -Dimensions each: 30/21/H15 mm -Weight: kg

Condition: good (used), screw clamps, pipe clamps, pipe fastening, hose clamps, line clamps -Manufacturer: Norma, pipe clamps 200 pieces -Type: Ø11x15 W1 -Clamping range: 11 mm -Band width: 15 mm -Price/Delivery: complete Njdpfjv Awmbex Ahvscn -Dimensions each: 35/23/H15 mm -Weight: kg

Condition: good (used), Profile bending machine, bending machine, flat bar bender, horizontal bending/straightening press -Flat bar bender: hydraulic profile bending machine -Base: on casters, table folds on both sides -Operating mode: Manual and automatic operation -Accessories: see photos -Overall dimensions: 2155/1320/H1070 mm -Transport dimensions: 1320/840/H1245 mm -Weight: 404 kg Ncodpfx Ajh Tk Dashven