Used Pin Slot Machine for sale (68,636)

Condition: used, Universal milling machine table, angle table, setup angle, clamping table, presumed MAHO make T-slot table, add-on table for universal tool milling machine Table no.: 76-400-1 / 2210 05 00 Table size: 700 x 330 mm Overall height: 210 mm T-slot width: 12 mm T-slot pitch: 45 mm - Table plate with 7x T-slots, 12 mm each - Mounting surface 90°, 13 mm diameter holes, 14 mm elongated holes for fastening and 12 mm guide slot - Hole spacing, top mounting plate Ø 13 mm = 500 mm, 50 mm from the table surface (measured at center) - Hole spacing, middle mounting plate Ø 13 mm = 472 mm, 95 mm from the table surface (measured at center) - Elongated hole spacing, middle mounting plate = 475 mm, 140 mm from the table surface (measured at center) - Elongated hole spacing, bottom mounting plate = 475 mm, 185 mm from the table surface (measured at center) Dimensions (L x W x H): 820 x 330 x 210 mm Weight: 61 kg Kljdpfx Aexy Styjh Njl In good condition

Condition: used, Vertical Slotting Machine GSP type MORT 730 3-jaws chuck Ø 250 mm Slide travel: 170 mm Throat heigth: 300 mm Throat depth: 450 mm Swivel head +/- 30° Axes: X auto / Y manual Table Ø 500 mm Table: Manual Rotation Feeds: from 0 to 1,2 mm/stroke Strokes/min.: 31, 50 or 79 strokes/min. Vernier Graduation: 1 division = 0,1 mm Voltage: 380 V Width: 1400 mm Depth: 2100 mm Kledpjx Ei Rcsfx Ah Njl Total height: 2100 mm Weight: approx 1,5 T

Condition: like new (used), Year of construction: 2018, machine/vehicle number: DC-2075, Work table 700 x 300 mm, drilling width 240 mm, Klsdpfx Asvl Eynoh Nsl drilling depth 150 mm, max. travel 230 mm, drill head height adjustment 160 mm, drill head swivel 45°-0°-45°, Wescott drill chuck 0 - 20 mm, speed 3,000 rpm, motor 2.2 kW, 400 volts, 50 Hz., weight approx. 345 kg, from the Seevetal location, without transport, as seen, subject to prior sale.

Condition: new, Year of construction: 2024, machine/vehicle number: 2209, height adjustment type: mechanical, --- the 'new' own brand of: HoKuTech GmbH & Co. KG --- Slot Mortising Machine VD 20 R Motor 1.5/1.9 kW, Lateral travel in Y-axis 250 mm, Longitudinal travel in X 340 mm, Vertical travel in Z-axis 200 mm, 2 speeds 1,440 and 2,880 rpm. One-hand dowel boring device with divisions 16 - 22 - 25 - 32 mm, 2 manual eccentric clamps, manual digital display for drill height, Table dimensions 700 x 400 mm, Drill chuck max. D = 20 mm, Table rotatable +/- 45°, Kedpfxsrxcyle Ah Nsll Weight approx. 345 kg available immediately from stock Seevetal, subject to prior sale,

Year of construction: 2011, condition: excellent (used), functionality: fully functional, Tool travel : 0-315 mm Strokes per minute : 14 - 60 Ram adjustment : 235 mm Swivel angle of head : ±45° Head to table distance : 510 mm Tool to column distance : 460 mm Diameter of rotating table : 450 mm Diameter of central hole of rotating table : 80 mm Number of fixed positions of rotating table : 24 Longitudinal travel of worktable : 265 mm Transverse travel of worktable : 200 mm Self-breaking main motor : 4 kW / 5.5 h Weight : 1310 kg Overall dimensions : 1000 x 1500 x 2250 mm Klodpfx Ahevfctfs Nol

Condition: new, Year of construction: 2024, TECHNICAL DATA -drilling depth max. 145 mm -drilling length max. 240 mm -height adjustment 135 mm -suction port ø 100 mm -speed 1500 / 3000 rpm -ColorRAL 7035 light grayRAL 5000 violet blue -net weight approx. 200 kg Solid German machine construction Professional slot milling and precise dowel drilling Fixed table, smooth running mobile drilling motor Travelling device for more mobility Cast iron table 700 x 380 mm thick-walled and highly ribbed Smooth-running cross support with adjustable ball guides for lateral and depth adjustment Height adjustment via handwheel and scale, drilling depth stop via scale, drilling length limitation adjustable via side stops on left and right side Drilling motor power 1.3 kW/1.8 HP or 1.7 kW/2.3 HP, pole-changing, speed 1500/3000 rpm with motor brake and practical tool tray Incl. emergency stop button High-precision three-jaw drill chuck, clamping range 5 - 20 mm Dowel drilling device for hole line drilling with grid roller 16, 22, 25 and 32 mm high-precision milled grid, fixation via spring-loaded grid pin frame stop pluggable with index bolts for the positions: center, left, right Miter fence pluggable with index bolts for 45° and 22,5°workpiece fence up to 1500 mm for series machining CE-conform Ksdsfpa Raopfx Ah Nsll GS tested

Condition: good (used), Code: 0028 Brand: OMG Model: EPM/70 Automatic slotting machine for blinds Kljdpfxjxvxpgo Ah Nel Technical data Spindle connection mm 10 Drill speed 12000 rpm Simultaneous machining of 2 sections 18 possible pitches with a single toothed rod Slots depth up to 25 mm Drill motor Hp 1,5 Slide motor Hp 1 Up to 20 slots / minute Inclination from from 90 degrees (vertical) to 0 degrees (horizontal) Max section dimensions mm 100 x 120 Automatic stop Overall dimensions: machine mm 1500 x 1000 x 1200 h - kg 490 - Rack mm 3200 x 100 x 200 h - kg 30

Condition: used, Year of construction: 2001, dimensions of the machine ca. 1450 x 1560 x 2620 mm weight of the machine ca. 1,8 t The machine frame is a solid welded construction. The cooling oil tank is located in the machine bed. The cross table is made of cast iron, guideways are ground and scraped with adjustment strips. The shaper head is also made of cast iron, the guides are ground and scraped, with lubrication grooves. The push head can be swiveled +/- 20 degrees. Stroke adjustable through side opening. Tool is positioned at the longitudinal stop. The machine has a mechanical stroke drive. The control for the CNC dividing head is housed in the control panel. The zero point can be set in any position of the dividing head and with the division options of 2-999 symmetrically and 99 divisions asymmetrically. Machine color: Green Kledpfxjwbi Awj Ah Nel Color dividing head: red --> Digital operating instructions available in German + English

Condition: new, Year of construction: 2025, Semiautomatic milling machine with four electrospindles for water slot MLA WS42 EVO, new Ksdpfx Aewqlmdoh Nell

Condition: as good as new (ex-display), Year of construction: 2025, Dowel hole drilling device: Pitch 16, 22, 25, 32 Drilling depth: 180 mm Slot length: 240 mm Height adjustment range: 160 mm Ksdpjv N Tyqjfx Ah Nell Motor power: 2.2 kW Speed: 3000 rpm Extraction connection: 100 mm Machine length: 1280 mm Machine width: 960 mm Weight: 260 kg

Condition: good (used), Year of construction: 1995, functionality: fully functional, Approx. year of manufacture 1995 Kljdjxwc A Tspfx Ah Nsl

Condition: excellent (used), functionality: fully functional, Slotting machine Urpe model M-300 G of tilting head, Slotting of course of 0-300mm of travel, number of blows per minute 30-35-40, distance of the tool to the column 500mm, distance adjustable from the table to the ram 425 -585mm, max distance between tool and body 450mm, table surface 800x325mm, long table travel 550mm, rec transv 265mm, motor pot 5.5cv, estimated weight 1850kg, with Chuck Ksdpfx Ahjvdknzo Njll

Condition: ready for operation (used), Year of construction: 2000, Table length: 530 mm Table width: 230 mm Table height: 800 mm Table fixed Drilling length: 200 mm Drilling depth: 150 mm Height adjustment: 200 mm Kljdpfep Dt T Eex Ah Nol Drill chuck diameter: 0 - 20 mm Drilling speed: 2800 rpm Motor power: 2.2 kW Weight: 160 kg

Condition: new, Year of construction: 2024, functionality: fully functional, VD 20 R Slot drilling machine with rotating table, 2.2 kW Kjdou Rnw Dspfx Ah Noll Basic equipment: 1.1 Work table mm 800x400 1.2 Motor kW 1.5 1.3 Spindle speed rpm 2880 1.4 Max. Slot height above the table mm 160 1.5 Max. Longitudinal travel mm 345 1.6 Max. Transverse travel mm 245 1.7 Spindle stroke mm 160 1.8 Clamping diameter of the tool mm 0-20 1.9 Max. Tool length mm 175 1.10 Clamping eccentric piece 1 1.11 Longitudinal tilting table inclination ° 1.12 Spindle rotation ° 1.13 Rotation of the table ° +/- 45° 1.14 Machine dimensions mm 1500x1100x950 1.15 Machine weight kg 345 Additional equipment installed on this machine: - Suction nozzle - 2nd clamping eccentric - Mechanical dowel drilling device - 2 speed motor 1.5/1.9kW 1440/2880 rpm - Mechanical numerical dimension of the spindle height

Condition: used, Slotting head, suitable for DECKEL type FP 2 milling machine Manufacturer No. 2211 / 1895 Dovetail width: approx. 76 - 88 mm Dovetail height: approx. 14.5 mm Dovetail length: 320 mm Kledpfx Ahewbi Rbj Nol Dovetail leading edge to gear center: approx. 235 mm Stroke size: max. 80 mm Stroke rate: max. 210 double strokes/min. Tool holder: square, 16 x 16 mm with clamping plate - Stroke size adjustable via eccentric adjustment - Driven by the machine gear, within the dovetail guide (as with a normal vertical head) - This slotting head is inserted into the dovetail guide in place of the normal vertical milling head (Mounted in place of the vertical milling head, milling head) - Drive gear in the slotting head, 39 teeth, gear width 16 mm, presumably 20° pressure angle - Slotting head on the flange plate can be rotated 360°, degree scale +/- 35° Weight: 32 kg Very good condition DECKEL FP1 has a pressure angle of 15° on the drive gear DECKEL FP2 + FP3 - has a pressure angle of 20° on the drive gear

Condition: good (used), max. ram stroke 230 mm throat 230 mm table diameter 0 mm Klodpfx Ahow Ny S Rj Nel are offered : 2 pieces of shaping spindle for Lorenz gear shaping machines type LS 630 to LS 1250 1x overhauled new 1x has to be overhauled. Year of manufacture: unknown

Condition: good (used), Year of construction: 2000, max. ram stroke 2 - 300 mm groove width 2 - 32 mm power capacity 8 kW no. of strokes 2 - 300 Hub/min throat ca. 300 mm Max. installation height ca. 450 mm automatic feeds 0,01 - 0,15 mm work speed 0 - 30 m/min return speed 30 m/min weight of the machine ca. 2,2 t dimensions of the machine ca. 2,5 x 1,5 x 2,2 m The BALZAT keyway jointing machine is characterised by the following advantages: Klsdpfx Aeuayibjh Nsl - Infinitely variable adjustment of the jointing speed with constant return, even during the work process - Simple clamping of the workpieces with standard clamping devices, without additional tool holders - Extreme dimensional accuracy thanks to self-centring, centrally arranged blade holders - Feed rate can be changed during the programme sequence - Machine base is also a container for cutting oil - all components are easily accessible and replaceable

Condition: excellent (used), Year of construction: 2003, operating hours: 2,100 h, functionality: fully functional, machine/vehicle number: 16/20, Siemens 840 D Powerline Spindle speed: 50 rpm/6000 rpm Tool holder: SK 40 Klsdpsuc T Rdefx Ah Njl X-axis: 1300mm Y-axis: 150mm Z-axis: 150mm Clamping hydraulics Pendulum operation possible 8-fold tool changer Weight: approx. 2500 kg Partially overhauled, Commissioning within a radius of 200 km included in the price.

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, CNC vertical slot milling machine Year of manufacture: 1989 Working range: x-axis 1300mm y-axis 150mm z-axis 200mm Tool holder: SK40 Klodpfx Aheuc T S Us Njl Spindle speed: 350 rpm - 4000 rpm Max. Slot length: 1200 mm Max. groove width: 40 mm Clamping surface: 1300 mm x 300 mm Weight: approx. 3500 kg Coolant device Dimensions: 1600 mm x 1500 mm x 1800mm (LxWxH) Hydraulic system Partially overhauled, new milling spindle Commissioning within a radius of approx. 200 km included in the price

Condition: new, Year of construction: 2025, Brand new NC-controlled precision vertical slotting machine for efficient production of keyways. Kjdpfx Ajxdi D Deh Nsll Menu-guided program control for slot depth, slot width, cutting depth, tool width, and number of finishing strokes. Optionally available with a rotary indexing table. Rotary table diameter Ø 320 mm – up to three CNC axes possible. Stroke range of the slotting ram: 0 to 200 mm. Table size: 280 x 500 mm. Clamping table bore: Ø 80 mm. Throat depth: 350 mm. Maximum workpiece height: 400 mm. Continuously variable ram speeds: 30 to 120 mm/min. Dimensions approx. 1.2 x 1.2 m x height 2.3 m. Drive power: 2.2 kW. Weight approx. 2,200 kg.

Condition: used, Year of construction: 2002, Used machine Year of construction 2002 table size 580 x 280 mm Drilling table height 800 mm Drilling depth 150 mm Drilling length 225 mm with Wescott drill chuck 0-20 mm Kledew Naccepfx Ah Njl height adjustment 120 mm Swivel range drilling unit 2 x 45 ° with 2 eccentric clamps with one-hand operation with dowel drilling device with dial gauge in handwheel with digital display with 2 speeds 1400 and 2800 rpm with drive unit LxWxH 850x1000x1050 mm Weight approx. 240 kg Availability: short term Storage location: Flörsheim

Condition: new, Year of construction: 2023, New machine Kjdpfsw I Uzkox Ah Njll Year of construction 2023 Equipment and technical data: - Solid German machine construction - Professional slot milling and precise dowel drilling Fixed table, smooth-running mobile drill motor - Travel device for greater mobility - Cast iron table 700 x 380 mm thick-walled and highly ribbed - 2 manual eccentric clamps with solid steel columns for clamping the workpieces - Smooth-running cross support with adjustable ball guides for lateral and depth adjustment - 2-lever operation - Height adjustment via handwheel and scale, drilling depth stop via scale, drilling length limit adjustable via left and right side stops - Drill motor power 1.3/1.7 kW, pole-changing, speed 1500/3000 rpm with mechanical motor brake and practical tool tray - incl. emergency stop button - High-precision two-jaw drill chuck with protective sleeve, clamping range 1-20 mm - Dowel drilling device for drilling holes in rows with 16, 22, 25 and 32 mm raster roller high-precision milled raster, fixed via spring-loaded raster bolt - Plug-in frame stop with index bolt for the positions: center, left, right Mitre fence, plug-in with index bolt for 45° and 22.5° - Workpiece fence up to 1500 mm for series processing - CE-compliant, GS tested - Max. Drilling depth 145 mm - Max. Drilling length 240 mm - Height adjustment 135 mm - Clamping range 5-20 mm - Motor power 1.3 / 1.7 kW - Voltage 400 V / 50 Hz - Suction nozzle 100 mm Ø - Color RAL 7035 light grey and RAL 5000 violet blue Special equipment: - Dial gauge in the handwheel, with 0.1 mm height adjustment display instead of the scale - Single-lever operation with remote locking for longitudinal and transverse movement of the drill motor including loosening and locking of the raster bolt on the dowel drilling device, narrow workpieces can then also be processed from the side of the table - Emergency stop button with key - Safety cover over the drill chuck with electric lock New price with this equipment 12213. Shipping dimensions: 120x80x160 cm Weight: approx. 200 kg Availability: short term Storage location: Hochheim

Condition: used, Table unit from a DROOP & REIN portal milling machine Clamping plate with T-slots made of cast steel gray cast iron Table unit with clamping plate and very solid guideway Table clamping surface 5500 x 2000 mm Travel of the table clamping plate approx. 3100 mm Table height 1050 mm Table load: max. 20 tons Ball screw: Ø 100 mm Thread pitch: 20 mm (single-start) - Processing table guided very stably on the bed - Metal telescopic guideway cover - comes from a DROOP & REIN portal milling machine Ksdpfx Aethuzpjh Noll - Longitudinal table movement via ball screw and SIEMENS servo motor - Clamping surface with 11 T-slots 28 mm - Drive via SIEMENS 1FT6134-6AB71-1AG2 servo motor with IC200448S/R encoder (RN 000 B25) Total length 9500 mm Width 2000 mm Overall height 1050 mm dead weight 28 ton. good condition

Condition: used, Clamping plate with T-slots made of cast steel/grey cast iron Base plate for radial drilling machine Assembly table, assembly station, base plate for column slewing crane Length 1850 mm Width 915 mm Plate thickness 230 mm Table surface with T-slots 1030 x 750 mm - Clamping surface with T-slots 22 mm, spacing = 250 mm - Top side milled parallel to the underside = clamping surface - Underside also milled, ribs rest flat and support - Ideal as a base plate Klsdpfx Aoh R D Uzoh Nel Net weight 1140 kg good condition

Condition: as good as new (ex-display), Year of construction: 2022, Dowel hole drilling device: Pitch 16, 22 25, 32 Drilling depth: 150 mm Slot length: 250 mm Height adjustment range: 145 mm Motor power: 1.5 kW Ksdpegzlq Eofx Ah Nsll Speed: 3000 rpm Suction connection: 100 mm Machine length: 1280 mm Machine width: 960 mm Weight: 160 kg