Used Pin Cutting Machine for sale (69,987)

Condition: used, Year of construction: 1972, functionality: fully functional, machine/vehicle number: D08U/8378, Offer Number: D08U/8378 Machinetype: straightening and cutting machine Info: flying shears Make: WAFIOS Njdpsw Nhv Dsfx Ahvswd Type: RF6 Constr. year: 1972 diameter range: 8-16 mm cutting length: 520-6000 mm speed - meters/min: 25-75 diameter range: 8-14 mm Location: Outside of Europe

Year of construction: 2017, condition: excellent (used), Lovati BEM 31 CNC Glass Cutting Machine with CNI Unico Control Maximum Glass Dimension 3,200 x 1,650mm. Glass Thickness Capacity 3-20mm. Spindle Speed Range 14,000rpm. Power 40kW. Equipped With Tilting Loading Table & Roller Conveyor. Machine Dimensions 5,420 x 3,070 x 2,100mm. S/No. 725. Please note: Seller will dismantle, secure and load on transport for 2500 Euro additional cost which will be added the buyer's invoice. Nwedpfx Asyvkbqohvsd

Year of construction: 2010, condition: ready for operation (used), A CO2 laser cutting and marking machine Eurolaser, which was used for acrylic glass, is available. Laser power: 200W, working dimensions X/Y: 2270mm/1600mm, max. cutting width: 2200mm, material feed width: 2350mm, table feed-through height range: 58mm-80mm, engraving resolution: 1200dpi, grayscale levels: 256, material processing: films/textiles/plastics/composite materials/paper/thin wood. Machine dimensions X/Y/Z: approx. 4000mm/2350mm/1600mm, weight: approx. 2000kg. The laser source was renewed in 2021. Documentation available. An on-site inspection is possible. Nwsdpfxsyviyre Ahvsd

Condition: good (used), functionality: fully functional, Year of construction: 2003, laser type: CO₂ laser, laser power: 2,700 W, X working area max.: 6500 mm Laser power: 2700 watts Control: SINUMERIK 840D Standard equipment TRUMPF loading unit: - Tube feeder for round, square, and rectangular tubes via buffer section with X-stop for tube lengths min. 3 m and max. 6 m - Semi-finished product length measurement - Transfer unit to the machine - Tube magazine with tube separation, alignment, and transfer to tube feeder, max. bundle weight 4000 kg - Good parts removal up to max. 3,000 mm with chip conveyor - Additional tube supports - Tube handling unit: Rotating and feed station: Rotating clamping unit with pneumatically actuated clamping jaws for tube lengths up to 6000 mm and tube diameters of d = 20 - 150 mm, 2 clamping ranges: d = 20 - 85 mm and d = 85 - 150 mm - Carriage unit with linear guidance - Feed station with motor drive, including connection for extraction - Tube support: Between tube support and traverse chuck, five automatically retractable Nwsdpeytfyzsfx Ahvod support elements with form shells are provided - Traverse chuck: With a passage of d = 150 mm - The tubes are positioned via the clamping jaws centrally in the Y and Z axes relative to the rotational axis for the cutting process - 2 sets of clamping jaws for round, square, and rectangular tubes (simple design), clamping range 20 - 85 mm, 85 - 150 mm - Good part removal (unloading cabin for round and rectangular tubes) - Sorting options: 2 finished parts (front and rear), 1 flat - Scrap conveyor; programmable sorting; max. scrap length 300 mm (collection container, scrap belt) - Finished part length up to 3000 mm can be automatically unloaded (front and rear) Safety equipment: - Compact extraction unit Filter system designed for the separation of airborne particles produced during laser cutting of metals - Light barrier: Loading area secured by light barriers - Protective cabin: In the area of the cutting head, a Macrolon sheet metal combination is installed for laser radiation protection - Chip conveyor: Conveyor belt for discharging cut remnants - Operating manual

Condition: used, Year of construction: 2012, operating hours: 7,500 h, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 35 mm, sheet thickness steel (max.): 35 mm, sheet thickness aluminum (max.): 30 mm, overall weight: 1,500 kg, input voltage: 400 V, total width: 4,000 mm, total height: 2,000 mm, total length: 8,000 mm, cutting height (max.): 110 mm, track width: 2,950 mm, Equipment: documentation/manual, Selling an Oerlikon plasma cutting system, Plasmatome 20 HPC, Nertajet HP 300 plasma source with CPM 400/450 torch heads for aluminum, steel, and stainless steel. Cutting range 2 x 6 m, cutting current 30-260 A, power consumption 80 kVA. Material thickness of the sheets to be cut with piercing up to 35 mm, external thickness up to 50 mm. Nwedsv I U Hcspfx Ahvsd Sold without cutting table.

Condition: excellent (used), Year of construction: 2022, operating hours: 1,040 h, functionality: fully functional, machine/vehicle number: BK325172106187, type of input current: three-phase, feed length X-axis: 2,500 mm, working width: 1,700 mm, The machine has relatively few operating hours and is in good condition. However, the cutting mat needs to be replaced. Nsdexu Dh Espfx Ahvjwd

Condition: like new (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 176063, table length: 4,000 mm, table width: 2,000 mm, Plasma cutting machine CORTA PS 3100 Year of construction 1991/retrofit, machine number: 176063 Cutting area: 4000 x 2000 mm Alternating operation of 2 cutting processes: 1x plasma cutting unit Stak Pak ll, 105 Ampere 1x oxyfuel cutting torch Nwodsvfmiwopfx Ahvsd MG 12 SE 30 CPS control unit DNC connection Graphic base version Trajectory: 6000 mm 1 torch suspension MG 200 K arc-dependent scanning 1 plasma interlock Portal carriage, cross carriage Torch suspension MG 200 K Cutting table 4200 x 2100 x 700 mm Modular, technically advanced Stak Pak II plasma cutting system, 105 amps 1 control module CM 6032 3 power modules PM 6042 1 PCM 35 torch, 15 m 1 PCM 140 torch, 15 m 1 cooling module ex works

Condition: good (used), functionality: fully functional, Year of construction: 2017, operating hours: 16,566 h, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser power: 4,000 W, CNC Laser Cutting System TruLaser Cell 7040 FKL (L31) 4000 Watt Max. working area (X x Y x Z) in mm: 4000 x 1500 x 750 Control: Siemens 840D PowerLine Laser power: 4000 Watt Operating hours: 16,566 h Laser beam on: 14,202 h Laser Machine TruLaser Cell 7040, Y1500 (L31) - X = 4000 mm, Y = 1500 mm, Z = 750 mm, B = 750 mm, B = +/- 135°, C = n * 360° - 30m fiber optic cable - Automatic optical recognition - Magnetic coupling - FocusLine - Teach panel with teach software - Network connectivity Machine data acquisition TruDisk 4001 - Power = 4000 W - Beam quality = 4 mm·mrad Njdpoytfgbefx Ahvswd - incl. laser power control Number of optical outputs Number of core switches Water-air cooler - For TruDisk 4001 Workpiece processing WeldLine Comfort - CutLine Professional - Prepared for laser cutting and laser welding - 2in1 fiber incl. core switch - Technology tables for cutting - ControlLine Motorized welding optics MDE nozzle f = 200 - Adjustable focus position: +30 mm / -70 mm TruTops Cell Basic Configurable control interface, control cabinet Safety equipment Extraction piping device Mobile room extraction unit Compact deduster with 4000 Nm³/h - Incl. spark pre-separator and self-cleaning filter mats CO₂ extinguishing system for 4000 Nm³/h Standard protective enclosure Automatic front sliding door - Incl. 2 control panels Status indicator light Movable hanging control pendant + TeachLine (special feature) - Optical sensor system with light section and incident light measurement allows complete 3D scanning of a measuring point - Coaxial camera integration - Incl. holder and wiring - Adaptation of TeachLine sensor system to MSO welding optics + Pneumatic clamping of rotary axis and counter bearing + Extension of machine body - Surcharge for special machine body and extension 240 mm to the left + Large rotary axis & counter bearing on machine body - Rotary axis and counter bearing supported by floor rail - Max. load capacity 2,000 kg - Max. torque 5,600 Nm - Counter bearing without lift (not even pneumatic) - Rotary feedthrough on counter bearing 8x pneumatic/12x electric - Interface on rotary axis and counter bearing each with support bar with 2x M12 threads and D16 round bolts - Manual clamping + Media feed on machine body + Valve terminal on machine body + Measuring head probe - Incl. holder with yoke plate and wiring - Incl. calibration sphere - Interface for probe

Condition: excellent (used), Year of construction: 2016, operating hours: 2,133 h, functionality: fully functional, working range: 4,000 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, table length: 4,000 mm, pump pressure: 4,000 bar, INTERMAC Primus 184 Metalworking machine, 3 axes, 4000 x 2000 mm (4000 x 1860 mm effective cutting area), year 2016. Operating hours: 2133. PC upgraded in 2022 with SSD replacing the hard drive. Maintenance performed as per schedule, plus seal/gasket and BFT pump replacement by BFT technician in 2022 (not recorded in the list). Machine is fully operational, and video of the machine in operation can be provided. The machine can be inspected at our client’s facility in the Veneto area. Nwedpfeyvh Afox Ahvsd

Condition: like new (used), functionality: fully functional, Very nice mobile paper cutting machine for sale. Heavy-duty construction with hydraulic clamping. Can store up to 99 jobs, equipped with light safety curtains and cutting guide light. LCD screen, single phase 230 volts. Complete with extra knife, cutting strips, tools, and manual. You are of course welcome to test this machine with us. We can arrange transport/packaging for you and load it into a truck or container. Ask for a price including transport (location: Netherlands). Regards, Henk Hoos. Nwedpsyvhryjfx Ahvsd

Condition: new, functionality: fully functional, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Bochu (FSCUT), controller model: FSCUT 2000 + Tube system, laser type: fiber laser, laser source manufacturer: Raycus, laser source model: Raycus RFL-C6000 (6 kW), laser power: 6,000 W, laser wavelength: 1,064 nm, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 16 mm, sheet thickness brass (max.): 12 mm, sheet thickness copper (max.): 10 mm, pipe diameter (max.): 220 mm, pipe length (max.): 6,000 mm, table length: 3,000 mm, table width: 1,500 mm, table height: 850 mm, working length: 3,000 mm, working width: 1,500 mm, working height: 100 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 100 mm, feed rate X-axis: 120 m/min, feed rate Y-axis: 120 m/min, feed rate Z-axis: 30 m/min, cutting speed: 60,000 mm/min, positioning speed: 120 m/min, workpiece weight (max.): 900 kg, input voltage: 380 V, type of input current: three-phase, type of cooling: water, overall weight: 8,500 kg, total length: 9,000 mm, total width: 4,500 mm, total height: 2,300 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, emergency stop, fume extraction, Description Fiber laser cutting machine FT62 with 6 kW power designed for cutting sheet metal as well as tubes and profiles. The machine is equipped with a 1500 × 3000 mm working table and a tube cutting module for tubes up to 6000 mm in length. Tube diameter range is Ø20–Ø220 mm and square profiles from 20 × 20 to 220 × 220 mm. The machine uses a Raycus 6 kW laser source, WSX cutting head and FSCUT CNC control system (Bochu). Thanks to Inovance servo drives, precision linear guides and rack drive, the machine ensures positioning accuracy of ±0.03 mm and repeatability of ±0.02 mm. The machine features a full protective enclosure, exchange working table, smoke extraction system, Tongfei 6 kW water chiller and 80 kVA voltage stabilizer. Maximum positioning speed is 120,000 mm/min. Technical specification Parameter Value Model FT62 Laser power 6 kW Laser type Fiber laser Laser source Raycus Cutting head WSX Control system FSCUT (Bochu) Working area 1500 × 3000 mm Max tube length 6000 mm Tube diameter Ø20 – Ø220 mm Square profiles 20 × 20 – 220 × 220 mm X axis travel 3000 mm Y axis travel 1500 mm Positioning speed 120,000 mm/min Positioning accuracy ±0.03 mm Repeatability ±0.02 mm Cooling Tongfei 6 kW chiller Nwjdpfeyvhm Rox Ahved Power supply 380 V / 50 Hz Construction full enclosure + exchange table Dust extraction smoke extraction system Voltage stabilizer 80 kVA Certification CE Optional equipment Option Price Industrial dust collector 7.5 kW approx. 39,000 PLN Tubest software (tube cutting) approx. 12,200 PLN Cypnest software (nesting) approx. 4,600 PLN Rotary unit left/right change approx. 1500 USD The machine can be configured according to the customer’s requirements. Laser power can be adjusted to individual needs: 3 kW, 6 kW, 12 kW.

Condition: used, functionality: fully functional, With this offer, you are purchasing a used Canon Booklet Trimmer F1. Item for sale: 1 x Canon Booklet Trimmer F1: Suitable for various Canon models. We also have other finishing options and printing machines in stock. Please feel free to contact us! Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Njdpfxoytciao Ahvowd Seaworthy packaging and worldwide shipping available on request! For more information, please feel free to contact us personally.

Condition: used, Year of construction: 1993, POLAR 115 EM-MON AUTOTRIM • Airtable • Side tables (air) • Light barrier • Programmable • Jogger – RAB2 • Lift – L600-3 • Three extra spare knives Nwedpfx Aeytb A Sshvod • In production • Available: 05/2026

Condition: excellent (used), Year of construction: 2017, operating hours: 14,052 h, functionality: fully functional, machine/vehicle number: M15305531R, repeat accuracy: 0.02 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 305 mm, positioning accuracy: 0.07 mm, workpiece weight (max.): 1,450 kg, type of input current: three-phase, input voltage: 380 V, travel speed (max.): 12,500 mm/min, MAXIEM 1530 II machine 30HP pump (22kW) Njdpfx Ahoyglpcjvowd Abrasive tank 1000 kg. In continuous operation, serviced every 500 hours.

Condition: excellent (used), functionality: fully functional, operating hours: 7,665 h, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Amada, controller model: AMNC, laser type: CO₂ laser, laser source manufacturer: Amada, laser source model: AF4000E, laser hours: 5,109 h, laser power: 4,000 W, laser wavelength: 10,600 nm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness brass (max.): 10 mm, sheet thickness copper (max.): 6 mm, table length: 3,000 mm, table width: 1,500 mm, table height: 900 mm, working length: 3,000 mm, working width: 1,500 mm, working height: 100 mm, travel distance X-axis: 3,070 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 100 mm, feed rate X-axis: 80 m/min, feed rate Y-axis: 80 m/min, feed rate Z-axis: 20 m/min, cutting speed: 20,000 mm/min, positioning speed: 100 m/min, positioning accuracy: 0.01 mm, repeat accuracy: 0.005 mm, workpiece weight (max.): 920 kg, power: 60 kW (81.58 HP), input voltage: 400 V, input current: 100 A, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 8 bar, overall weight: 12,000 kg, total length: 9,000 mm, total width: 3,000 mm, total height: 2,200 mm, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, AMADA FO3015 4kW CO₂ Laser Cutting System – 2016 – Under Power for sale. Our laser has the complete integrated Amada laser system including the automatic loader, chiller, and extraction. Njdpfsyi E Rrex Ahvswd This machine is currently in production and available for inspection. Please see the below technical details on this laser: • 4kW CO₂ • 3000 x 1500mm bed • Cutting capacity up to 20mm • Cutting Hours: 5,109 • Operating Hours: 7,665 • Installation: 2016 We are open to providing photos and operational videos if requested. This will be available from the 23rd of March 2026.

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, working range: 6,000 mm, sheet thickness (max.): 35 mm, track width: 2,000 mm, table length: 6,000 mm, cutting current: 260 A, We offer for sale a used, reliable, fully functional Messer Multitherm eco 3100 plasma cutting machine, year of manufacture: 2013. Manufacturer: Messer Model: Messer Multitherm eco 3100 Year of manufacture: 2013 Condition: ready for use Machine type: plasma cutting machine Available for pickup: 08/2026 Description: Power source: 260 A Table size: 2 x 12 m Cutting up to 35 mm sheet thickness Software: Omniwin 2025 Regularly serviced Pre-prepared for oxy-fuel cutting Test run possible upon agreement If you have any questions or need more information, feel free to write us a message or call us. Nodpoyvgdyjfx Ahvowd

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 80,087 h, machine/vehicle number: S2321M0007, control type: CNC control, controller manufacturer: SIEMENS, controller model: SINUMERIK, laser type: fiber laser, laser source manufacturer: TRUMPF, laser source model: TruFiber, laser power: 400 W, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, TruLaser Cell 3000 Highly dynamic and precise CNC laser machine solid polymer concrete machine body cantilever axes system 800 x 600 x 400mm travel X-Y-axes with linear motors direct absolute measuring system Z axis with linear guides and ball screw drives TRUMPF control based on SIEMENS Sinumerik 840D sl panel PC for process monitoring integrated switch cabinet and cooling unit water-air Nwodpfsyvfuwox Ahvjd incl. start-up and instruction TruFiber 400 Laser equipment compl. TruFiber 400 (G2) Single mode fiber laser for industrial use in welding and cutting: laser power: 400W at fiber end beam quality: M2 1.1 laser light cable: 6m LLK-B operation mode: Cw / modulated max. modulation frequency: 50 kHz pilot laser: standard Trumpf coil feeding unit design tube • Clamping and guiding for coil material • Length up to 800mm • Thickness from 0,1mm to 1,9 mm • Width from 40 to 250 mm • Width adjustment with Handwheel • Cutted parts guidance in a Boxsystem or a funnelsystem • Pneumatic feeding coil 50mm stroke right • Coil feed control

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, Paper jogging table Make: POLAR Type: RAB 5 Format: 800 x 1200 mm Year: 1996 Nwodpoyvd Szsfx Ahvsd Machine No.: 6681336 Equipped with air removal. More photos and video available. Price on request.

Condition: used, Year of construction: 2020, controller manufacturer: Siemens, controller model: sinumerik 840d, _____ Description: Year of manuf. : 2020 Accuracy : 0,015 mm Technical specifications Axis travel range:X 800 mm, Y 600 mm, Z 400 mm Workpiece machining:CutLine Professional 2D Machining:2D Cutting head camera:available Dimensions:3300 x 1600 x 2200 Axis speed:50 m/min Max. axis acceleration:10m/s² Positioning accuracy:0.015mm Equipment :-Variable clamping system :-Teach panel :-TruDisk 3000 :-Cutting optics adjustment device :-Automation interface Njdpfoyr Uiiex Ahvowd

Condition: new, x-travel: 3000y-travel: 2000z-travel: 250performance of pump (flushing): 37 Control: Siemens PLC Touch Screen directly usable DXF files Outlet pressure: max. 5500 bar Abrasive conveyor system for water jet cutting systems - filling weight 350 kg OMAX vacuum sensor for monitoring the abrasive supply to the nozzle Pump pressure control sensor With water jet cutting, water is compressed at a pressure of up to 5500 bar. Depending on the requirements and the workpiece, this is then pressed through a nozzle with a diameter of 0.01 to 0.08 mm. Since water jet technology processes materials without heat input, there are no deformations. By adding an abrasive, water jet cutting enables maximum precision with tolerances of +/- 0.01 mm. Our flexible production allows vertical as well as diagonal cuts. We would be happy to receive your individual CAD data. The water jet technology offers great advantages for industry, trade and individual prototype production. Water cutting technology is also a plus point for the environment, as it works dust- and steam-free and also saves material. Waterjet Cutting: Example Gallery What sounds impressive in theory is even more impressive on the finished object. We have put together a selection of images to demonstrate our waterjet cutting capabilities. Click through the photos in the example gallery and get an impression of what is possible with this modern processing method. Waterjet will also find the right solution for your order! advantages No deformations in the cutting area Cutting without heat input Material saving High precision: +/- 0.1mm Cutting area: x = 3010 mm; y = 2010mm; Z=250mm Flexible manufacturing Vertical and oblique cuts Adoption of your CAD data formats: DXF, DWG, iges, stp, step, prt, jpt, jam Environmentally friendly, vapor and dust free We cut everything All materials brought into shape aluminum stole Brass Copper & Bronze Other precious metals Glass Granite & Marble tiles composites Promat cuts rubber plastics plexiglass Nwsdpfxjhqnl Tj Ahvsd Options: Oil cooler                                                         ¤ 10,725.00 Water filter system                                           ¤ 1,430.00 Sludge suction system                                     ¤ 10,725.00 Professional water treatment system               ¤ 10,725.00 An oil cooler must be present when commissioning!!! So you can work longer than 1 hour.

Condition: new, x-travel: 4000y-travel: 2000z-travel: 250performance of pump (flushing): 37 Control: Siemens PLC Touch Screen directly usable DXF files Outlet pressure: max. 5500 bar Abrasive conveyor system for water jet cutting systems - filling weight 350 kg Nedpfxjd Ab Uus Ahvewd OMAX vacuum sensor for monitoring the abrasive supply to the nozzle Pump pressure control sensor With water jet cutting, water is compressed at a pressure of up to 5500 bar. Depending on the requirements and the workpiece, this is then pressed through a nozzle with a diameter of 0.01 to 0.08 mm. Since water jet technology processes materials without heat input, there are no deformations. By adding an abrasive, water jet cutting enables maximum precision with tolerances of +/- 0.01 mm. Our flexible production allows vertical as well as diagonal cuts. We would be happy to receive your individual CAD data. The water jet technology offers great advantages for industry, trade and individual prototype production. Water cutting technology is also a plus point for the environment, as it works dust- and steam-free and also saves material. Waterjet Cutting: Example Gallery What sounds impressive in theory is even more impressive on the finished object. We have put together a selection of images to demonstrate our waterjet cutting capabilities. Click through the photos in the example gallery and get an impression of what is possible with this modern processing method. Waterjet will also find the right solution for your order! benefits No deformations in the cutting area Cutting without heat input Material saving High precision: +/- 0.1mm Cutting area: x = 3010 mm; y = 2010mm; Z=250mm Flexible manufacturing Vertical and oblique cuts Adoption of your CAD data formats: DXF, DWG, iges, stp, step, prt, jpt, jam Environmentally friendly, vapor and dust free We cut everything All materials brought into shape aluminum steel Brass Copper & Bronze Other precious metals Glass Granite & Marble tiles composites Promat cuts rubber plastics plexiglass Options: Oil cooler                                                         ¤ 10,725.00 Water filter system                                           ¤   1,430.00 Sludge suction system                                     ¤ 10,725.00 Professional water treatment system               ¤ 10,725.00 An oil cooler must be present when commissioning!!! So you can work longer than 1 hour.

Condition: used, Year of construction: 2010, Trumpf TruLaser 1030 – Laser Cutting Machine - B&R Automation PC 820 CNC Control - TruCoax 2500 Laser - Serviced annually by Trumpf (last service July 2025) - Year of manufacture: 2010 Technical Specifications: Working Area: - X-axis: 3078 mm - Y-axis: 1550 mm - Z-axis: 76 mm Maximum Material Thickness: - Mild steel: 16 mm - Stainless steel: 8 mm - Aluminium: 6 mm Speed: - Max. cutting speed: 40 m/min Nodoyghm Dopfx Ahvjwd - Cutting acceleration: 2 m/s² - Positioning acceleration: 9 m/s² Accuracy: - Smallest programmable increment: 0.001 mm - Position deviation: ± 0.1 mm/m - Average positioning scatter: ± 0.03 mm Laser: - Max. laser power: 2500 W - Wavelength: 10.6 µm - Power stability: ± 2 % - Power distribution: TEM00 Compressed Air Consumption: - Standard cutting: 333 l/min - Air cutting: 500 l/min Electrical Data: - Drive type: maintenance-free three-phase motors - Connection: 65 kVA - Protection at 400 V: 100 A Dimensions & Weight: - Dimensions (W x H x D): 7396 x 2291 x 3287 mm - Total weight: 8850 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, Max. sheet size: 3000 x 1500 mm Fiber laser 3 kW Max. material thickness: Carbon steel: 20 mm, Stainless steel: 12 mm, Aluminum: 12 mm, Copper: 6 mm Accuracy: Repeatability ±0.05 mm Sheet change time: 27 sec. Cutting hours: 15400 h Nwsdpfx Aeyr N Uajhvod Length: 10495 mm Width: 6903 mm Height: 2880 mm Weight: 13000 kg

Year of construction: 2008, condition: ready for operation (used), A Bystronic CNC laser cutting system is available. Travel X/Y/Z: 4020mm/2020mm/170mm, max. sheet weight: 1500kg, positioning speed: 60m/min, simultaneous speed: 80m/min, positioning accuracy: +/-0.1mm, repeat accuracy: +/-0.05mm, laser: CO2, laser source: ByLaser 4400, laser power: 4400W, overall system dimensions X/Y/Z: approx. 8000mm/15000mm/2.5mm, cutting time: 17469h, power on: 35200h. Including two spare cutting heads 7.5in and 5in as well as various spare parts. Documentation available. An on-site inspection is possible. Expected to be available from June 2026. Njdpfx Aheyu T D Revjwd

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, operating hours: 24,184 h, machine/vehicle number: A0230A1546, laser type: CO₂ laser, laser source manufacturer: TRUMPF, laser hours: 24,184 h, laser power: 5,000 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 12 mm, table length: 3,000 mm, table width: 1,500 mm, Equipment: CE marking, cooling unit, documentation/manual, The machine has been serviced by TRUMPF under a maintenance contract. The machine can be inspected in operation in Budapest, and prompt collection is possible. Nwsdpfx Ahoyu S Ihsvsd