Used Picomax 54 for sale (3,397)

Year of construction: 1994, condition: good (used), machine/vehicle number: ST 151, Load capacity and weighing range: 2 t Fork length: 1100 mm Hnsdpjd Awntefx Afhok Fork width: 170 mm Load centre distance: 600 mm Lifting range: 78 - 198 mm Space requirement: 1500 x 560 x 900 mm Weight: 64 kg

Year of construction: 1985, condition: used, machine/vehicle number: 16085001, Table size: 480 x 1200 mm Hsdpsb H D Idefx Afhsnk Procedures x 650 mm y: 420 mm w: 210 mm w (drill head height adjustment): 540 mm smallest/largest distance between table and spindle nose: 0/720 mm Throat depth: 450 mm Spindle retainer: System SF 32 Infinitely variable spindle speeds: 25-5600 RPM Spindle drive: 380 V, 6 kVA Approximate weight: 3 tons Space: 2000 x 2200 x 2300 mm

Condition: used, maximum load weight: 32,590 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 11/2023, next inspection (TÜV): 11/2026, loading space length: 9,700 mm, loading space width: 2,480 mm, loading space height: 2,250 mm, loading space volume: 54 m³, total width: 2,550 mm, total height: 3,690 mm, Year of construction: 2023, Equipment: ABS, STAS 3-Axle All-Aluminium Tipper Semi-Trailer 54 cbm First registration: 11/2023 Mileage: only 125,653 km Internal dimensions (LxWxH): 9,700 x 2,480 x 2,250 mm Loading/unloading height: 3,690 mm Fifth wheel height: 1,150 to 1,200 mm JOST axles with large disc brakes, 430 mm Hsdpfx Asywf Axjfhjnk 1st axle LIFT AXLE WABCO Trailer EBS with RSS stability program WABCO Smartboard Aluminium air tanks Tyres: 6 x 385/65 R 22.5 ALCOA Dura-Bright high-gloss aluminium rims Crank-operated landing gear Full LED lighting 4 LED work lights EDBRO tipping cylinder Fully 8 mm wear-resistant aluminium trough floor Reinforced front wall 2-wing combination rear doors with swing function 2x grain chutes Roll-over tarpaulin with central locking Pneumatic vibrator Top condition, excellently maintained RENTING is the new BUYING – immediately available from us with full-service rental, too.

Condition: good (used), Year of construction: 1995, functionality: fully functional, travel distance X-axis: 420 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 120 mm, table load: 120 kg, overall weight: 1,500 kg, For sale: 1 used milling machine Manufacturer: W. Fehlmann AG Maschinenfabrik Model: 51 CNC Year of manufacture: 1995 Technical data: Working area: 420 x 240 x 120 / 450 mm Hnsdpfx Ajynwfxefhjk Control: Heidenhain TNC 355 Table: 720 x 280 mm / 120 kg load capacity Spindle taper: SK 30 Further technical details can be found in the photos. The machine is in very well-maintained condition and can be inspected at our warehouse in 09599 Freiberg.

Condition: good (used), Year of construction: 1994, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 260 mm, table width: 770 mm, table length: 320 mm, overall weight: 1,500 kg, For sale: 1 used milling machine Manufacturer: W. Fehlmann AG Maschinenfabrik Model: 51 DC Hnedjynwf Sopfx Afhek Year of manufacture: 1994 Technical data: Travel: 450 x 260 x 560 mm Table size: 770 x 320 mm The machine is in a very well-maintained condition and can be inspected at our warehouse in 09599 Freiberg.

Condition: reconditioned (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 03, overall weight: 350 kg, total width: 130 mm, total height: 1,800 mm, input voltage: 380 V, type of input current: three-phase, input frequency: 50 Hz, Equipment: documentation/manual, We have 17 sets of NF42 4/54,2/130，2/84,2/66， Year 1987-2005 With double iron roller With rubber prester With 16-20 Harness Frame With binder thread motion With 6 Contact Rail and Stop Motion Device Hsdju A Ir Eepfx Afhsnk With 2 weft thread transport State: Clean up and Clean, after repair testing

Condition: used, Cambio Debarker 54. If you are interested in purchasing, we are open to discussing the price. Hjdpfsww A E Rjx Afhjnk

Condition: excellent (used), Digital display Heidenhain Type: conventional Table KS 320 D Clamping surface: 530 x 270 mm Speed: 125 - 4400 rpm Feed: 0.03 – 0.40 mm/rev Hjdsyv Af Uopfx Afhjnk Drilling capacity in steel: 22 mm Thread cutting up to M16 Milling capacity in steel: 25 mm Drill spindle stroke: 120 mm Spindle motor power: 0.51 / 1.47 kW Dimensions: 2000 x 1200 x 1000 mm Weight approx. 900 kg

Condition: used, mileage: 560,084 km, power: 250 kW (339.91 HP), first registration: 02/2007, fuel type: diesel, number of seats: 54, gearing type: automatic, next inspection (TÜV): 07/2026, emission class: euro4, color: white, brakes: retarder, Year of construction: 2007, Equipment: ABS, air conditioning, parking heater,

Condition: used, Year of construction: 1986, functionality: limited functionality, type of input current: three-phase, filling weight (min.): 170 g, filling weight (max.): 500 g, Filling line for jars with twist-off lids, comprising: infeed rotary table, Kugler filling machine, upstream jar blowing station (steaming, unique / prototype), capping machine with vibrating hopper for twist-off lids with steaming, including steam generator. Previously used for jars with diameter/filling volume of: 63 and 66 mm for approx. 225 ml // 82 mm for approx. 425 ml. Heated product hopper, optionally with pneumatic transfer cart. Control system completely rebuilt in 2019; new vibration sensor/controller installed. Hjdpfx Afsw I Awgehonk

Condition: used, functionality: fully functional, machine/vehicle number: 6359, Heidelberg Cylinder S 54×72 for die cutting only Hodpfeyw Nwgsx Afhonk Machine data serial number: 6359 Was in daily use. Defects: missing right side dimension, cylinder is damaged on the upper edge, the deepest point of the damage is 45mm. The machine error does not affect the operation of the machine!!

Condition: used, Year of construction: 1996, material width 500 mm material thickness 0,3 - 3,0 mm no. of straightening rolls 5 straightening roll diameter 40 mm number of draw-in rolls 2 diameter of draw-in rolls 80 mm material cross-cut 600 mm² material thickness at 500 mm material width 1,2 mm material thickness at 200 mm material width 3,0 mm power requirement 4,0 kW weight 2,0 t dimensions (WxDxH) 1,5 x 1,5 x 1,9 m Hnsdevuum Njpfx Afhok with motor, upper straightening rolls individually manually adjustable, neumatic adjustment of the infeed rolls, coil loop control via ultrasonic sensor as is where is, WITHOUT putting into operation

Condition: used, mileage: 481,126 km, power: 265 kW (360.30 HP), first registration: 03/2015, fuel type: diesel, number of seats: 54, gearing type: automatic, next inspection (TÜV): 11/2025, emission class: euro6, color: white, brakes: retarder, Year of construction: 2015, Equipment: ABS, air conditioning, bathroom, parking heater,

Condition: used, machine/vehicle number: NEW-54, Year of construction: 2012, Log stacker Svetruck, type TMF 15/11 Hjdehhkf Nopfx Afhonk year of construction 2012 Mileage 16370 lt. counter Total weight 58500 kg Machine dimensions complete in length x width x height 11400 x 3900 x 6000 mm Machine dimensions (disassembled) in length x width 7500 x 3900 mm Height without dimensions 4700 mm Height without mast and mast support 4300 mm Machine dimensions mast in length x width x height 8000 x 1600 x 2000 mm Dimensions grapple in depth x width (closed) x height 1400 x 3600 x 4200 mm Length grab open 5200 mm, height grab 4000 mm Wheelbase front 1500 mm Height 250 mm (pole shield) Wheelbase rear 1600 mm Height 400 mm Lifting capacity telescope retracted max. 15000 kg Lifting capacity telescope extended max. 11000 kg Stacking height telescope extended (open gripper) 8000 mm Stacking height telescope extended (closed gripper) 7600 mm Reach center drive axis max. 6870 mm Drive via 6 cylinder Volvo diesel engine with 289 KW / 393 PS Displacement 12130 cm³ Transmission type Torque converter Automatic 3 forward ? and 3 reverse gears Driving speed 27 km/h Tire size 18.00 x 25? We will be happy to send you more data and additional pictures on request. This description is not a binding offer and may contain errors. No guarantee on all data.

Year of construction: 2007, condition: excellent (used), Description to follow! Hsdpfx Aoyr Siyjfhsnk

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 505 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 610 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 530, overall weight: 3,750 kg, spindle speed (max.): 36,000 rpm, number of axes: 5, This 5s FEHLMANN PICOMAX 60-HSC vertical machining centre was manufactured in 2008. It features a table size of 920x380 mm and offers impressive spindle speeds of up to 36,000 rpm. With a robust weight of 3750 kg, this machine is designed for precision and durability. If you are looking to get high-quality machining capabilities, consider the FEHLMANN PICOMAX 60-HSC machine we have for sale. Contact us for further details. • Table size: 920x380 mm Hodpfx Aoyizpdefhjnk • Spindle replaced in 2015 Technical Specification Taper Size HSK 50

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 700 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 610 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 35,000 rpm, number of axes: 5, This 5s FEHLMANN PICOMAX 90-HSC + Erowa automation was manufactured in 2005. It features a table size of 920x380 mm, with an impressive spindle speed of up to 35,000 rpm and a control system by Heidenhain TNC 530. If you are looking to get high-quality machining capabilities, consider the FEHLMANN PICOMAX 90-HSC + Erowa automation we have for sale. Contact us for further details. • Table size: 920 x 380 mm Additional equipment • EROWA Robot Multi automation Technical Specification Hnedpfx Aoyizugofhek Taper Size HSK 50

Condition: used, CNC Universal Coordinate Drilling and Milling Machine FEHLMANN type PICOMAX 100-CNC 3 CNC control HEIDENHAIN TNC 155 make no. 16186651 year of construction 1986 spindle holder FEHLMANN SF32 Hsdehik Ezepfx Afhonk drilling capacity Ø 30 mm in steel threading up to M20 in steel travel X: 850 mm, Y: 435 mm pinol stroke Z: 210 mm vertical movement milling head 580 mm Feed X and Y 1 to 8000 mm/min. Feed Z 1 to 4000 mm/min. Rapid traverse X and Y 8 m/min. rapid traverse Z 4 m/min. Table clamping surface 1570 x 500 mm distance spindle nose - table 130 - 720 mm projection spindle - column 450 mm Spindle speed 50 - 7100 rpm. Stepless spindle drive 10 kW Total connected power 20 kW Mains connection 400 Volt, 50 Hz - CNC control HEIDENHAIN TNC 155 with TFT monitor - 3 axes controlled, X, Y and Z pinol adjustment - hydro-mechanical tool clamping FEHLMANN SF32 - thread cutting device - cable remote control for machine operation and axis movements - motorized vertical movement of the milling head with shut-off via adjustable cams - 3D probe RENISHAW, type MP 11F with holder Fehlmann SF32 - 20 tool holders FEHLMANN SF32 - swivelling tool holder with 21 tool places - Coolant device in the machine column - control cabinet fixed to the machine - Documentation Operating manual, control manual and E-circuit diagrams space requirement L x W x H 2350 x 2000 x 2300 mm weight 3,2 ton. very good condition

Condition: used, empty load weight: 7,540 kg, maximum load weight: 31,460 kg, overall weight: 39,000 kg, axle configuration: > 3 axles, first registration: 06/2011, suspension: air, tire size: 385/65 22,5, tire condition: 30 %, color: white, Year of construction: 2011, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 40612 Feldbinder, EUT 55.3 * Year of manufacture: 2011 * ABS (Anti-lock Braking System) * Alloy wheels * Air suspension * Steering axle * Air coupling head (red & yellow) * 15-pin connector * Lift/lowering device * Storage/tool box * Hose box left and right * Bottom outlet * Folding ladder & railing * Baffle wall * Suspension: Air * Gross vehicle weight: 39,000 kg * Unladen weight: 7,540 kg * Payload: 31,460 kg * Permissible GVW: 39,000 kg * Axle manufacturer: Daimler * Tire condition 1st axle: 40% -- 40% - Tire size: 385/65 R22.5 * Tire condition 2nd axle: 30% -- 30% - Tire size: 385/65 R22.5 * Tire condition 3rd axle: 20% -- 20% - Tire size: 385/65 R22.5 * Tire sizes: 385/65 R22.5 * Manufacturer: Heitling * Volume: 54 m³ * Tridec steering system Hnjdeyicwgopfx Afhok Disclaimer: Specifications subject to change, prior sale, and errors excepted. Find more photos and videos on our homepage. Our comprehensive services include, for example: * Purchase / sale / rental of commercial vehicles * Fast, hassle-free financing * Processing of all (export) documentation * Order of export/customs license plates * Vehicle reconditioning: new tarpaulins, lettering, painting, etc. * Professional loading & load securing * TüV inspections, registration service * Transportation of commercial vehicles Contact our trained specialists—we are happy to advise you.

Condition: used, LCV-54 Horizon Stream Delivery The Horizon LCV-54 Stream Delivery is an efficient and precise solution for stacking folded printed products, specifically designed for use with Horizon folding machines. Key Features - Stream Delivery: The LCV-54 provides consistent and orderly stacking of folded products, facilitating further processing and increasing efficiency - Height Adjustable: Flexible adjustment of the inlet height allows for optimal integration into various production environments - Wide Compatibility: The LCV-54 is compatible with all Horizon AFC-5xx folding machines Specifications - Inlet Height: Maximum: 911 mm; Minimum: 429 mm - Format Range: Minimum: 128 x 148 mm; Maximum: 558 x 850 mm - Machine Speed: Up to 240 m/min All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Hsdpfoxr Aabex Afhjnk Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: good (used), machine/vehicle number: 3102, Year of construction: 2005, load capacity: 42,000 kg, lifting height: 6,610 mm, mast type: duplex, fork carriage width: 300 mm, fork length: 2,400 mm, total length: 8,500 mm, total width: 4,150 mm, operation weight: 57,000 kg, additional equipment features: Weight indicator, Equipment: lighting, SveTruck 42120-54 from Uniktruck Hedpfx Afsyuh Nzohjnk

Condition: used, LCV-54 Horizon Stream Delivery, used The Horizon LCV-54 Stream Delivery is an efficient and precise solution for stacking folded printed products, specifically designed for use with Horizon folding machines. Hnedpow Ew Amsfx Afhjk Key Features - Stream Delivery: The LCV-54 provides consistent and orderly stacking of folded products, facilitating further processing and increasing efficiency - Height Adjustable: Flexible adjustment of the inlet height allows for optimal integration into various production environments - Wide Compatibility: The LCV-54 is compatible with all Horizon AFC-5xx folding machines Specifications - Inlet Height: Maximum: 911 mm; Minimum: 429 mm - Format Range: Minimum: 128 x 148 mm; Maximum: 558 x 850 mm - Machine Speed: Up to 240 m/min

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, operating hours: 6,000 h, travel distance X-axis: 505 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 610 mm, workpiece weight (max.): 300 kg, controller manufacturer: Heidenhain, overall weight: 250 kg, table length: 920 mm, table width: 380 mm, controller model: TNC 426, feed rate X-axis: 20,000 m/min, feed rate Y-axis: 20,000 m/min, feed rate Z-axis: 20,000 m/min, spindle motor power: 10 W, spindle speed (max.): 18,000 rpm, spindle speed (min.): 50 rpm, table height: 1,004 mm, Equipment: documentation/manual, rotational speed infinitely variable, The machine is equipped as follows: -Tool holder: SK 30 -Tool changer with 24 places (automatic tool change) Hjdpfov A Tyqox Afhsnk -Coolant system -Spindle cooling -Mist extraction -Chip drawer -RENiSHAW measuring probe

Condition: used, offer consists of: Horizon MKU-54 mobile knife unit - installation: height automatically adjustable - usage: online and offline workable - sheet size: max. 540x360mm; min. 160x100mm; - infeed height: 570-970mm Hodsx T Aymepfx Afhsnk - capacity: 20.000 Takte; 230m/min - power: 230V / 50Hz - 0,7kW - dimensions: 1.060x750x1.300mm - weight: 280kg We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: used, machine/vehicle number: M304, Krones PET Block 54/8 Monobloc Filler–Capper – Overview The Krones PET Block 54/8 is a second‑hand monobloc composed of a rotary isobaric filler and rotary screw capper for PET bottles. Engineered for beverage production and industrial packaging, this unit is ideal for integrating into a used bottling line requiring counter‑pressure filling and PCO 1881 closure application. With 54 fixed filling valves and an 8‑head capper, it delivers reliable performance on large PET formats with precise neck handling. Technical Specifications & Performance Data Configuration: Monobloc Filler–Capper (filler + capper; no rinser module) Filling technology: Isobaric, fixed-valve counter‑pressure Number of filling valves: 54 Hsdpfxeyhcgbs Afhsnk Valve pitch (center distance): 126 mm Capper: 8-head rotary screw capper for plastic closures Neck finish: PCO 1881 (short finish) – plastic screw caps Bottle materials: PET Nominal capacities: 1.5 L = 9,000–10,000 bph; 3.0 L = 7,000–8,000 bph Machine rotation: Clockwise Overall dimensions: L 3.8 m, W 3.2 m, H 2.65 m Approx. weight: 7,500 kg Reference: M302 Module Details Filler carousel: 54 valves, designed for carbonated beverages and counter‑pressure operation; suitable for still beverages with inerting depending on product setup. Capper turret: 8 capping heads optimized for PCO 1881 plastic screw caps; consistent application torque and bottle neck handling for PET containers. Advanced Automation & Control Systems PLC platform: Siemens S7 for process control, diagnostics and integration. Signal and I/O: Provision for standard digital signals to synchronize with upstream/downstream equipment on a used bottling line. Process control: Counter‑pressure phases managed via PLC for stable fill levels and CO₂ retention. Production Line Integration Capabilities Line compatibility: Ideal for beverage production environments seeking to upgrade or expand a second hand industrial packaging line. Upstream equipment: Can interface with external bottle rinsers or blow molding machines (not included). Downstream equipment: Compatible with conveyors, labellers, packers and palletizers. Handling system: PET neck handling for stable transfer between filler and capper. Machine Condition & Maintenance History Status: In storage; filler dismantled and stored. Operating readiness: Operating after scheduled service/maintenance. Power: Not connected. Operating hours: Not set. Typical availability: Unit can be prepared for dispatch after service with a standard lead time. Operational Performance & Versatility Process benefits: Isobaric fixed-valve design supports low-foam filling, minimized oxygen pickup and consistent fill volumes on large PET formats. Format range: Optimized for 1.5 L and 3.0 L bottles; additional formats possible subject to parts and changeover kits. Closure system: Reliable application of PCO 1881 screw caps for CSD, sparkling water and other carbonated beverages. Installation Requirements & Site Preparation Footprint: 3.8 × 3.2 m; recommended service clearance aroun...