Used Pet Food Granulator for sale (8,942)

Condition: used, Manufacturer CONDUX Model CS 450/600-2 Hollow body granulator and secondary granulator for pre-shredded material Rotor: 450 mm diameter x 600 mm working width 5 rotor blades (angled cut), 2 stator blades Drive motor 22 kW Bodpfx Akey Icp Ro Eolg

Condition: used, Drive motor 37 kW (can be increased to 75 kW) Rotor diameter: 500 mm Rotor width: 600 mm Inlet opening: 500 x 600 mm 5 knives, diagonal cut Bodey Icmispfx Ak Eelg Hinged housing, with 2 stator knives.

Condition: used, power: 160 kW (217.54 HP), Granulator TRIA 120-80 FN / Granulators New hydraulics, new knives, new bearings Drive: 160.0 kW Rotor knives: 5x2 Stator knives: 2x2 Rotor diameter: 700 mm Rotor width: 1200 mm Blodpsy Ichtsfx Ak Eog Feed opening: 800 x 1200 mm

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Drive power 160-250 kw With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Bledpfoy Icg Aex Ak Esg Throughput capacity up to 5 t/h depending on material and grain size

Condition: used, power: 160 kW (217.54 HP), Granulator DREHER 26/90 / Granulators The machine is equipped with precision-ground blades and is suitable as a granulator for punching grids and film webs. Machine data: Drive: 7.5 kW Rotor blades: 5x3 Stator blades: 2x2 Rotor diameter: 260 mm Rotor width: 900 mm Bsdpfxey Icgvs Ak Ejlg With roll feed

Condition: used, Condux Granulator type CS 300/600-4 WK Blodpoy Icd Uofx Ak Ejg Rotor diameter: 300 mm Rotor width: 600 mm Rotor knives: 3 Housing with 4 stator knives Drive motor 11 kW (on request max. 30 kW)

Condition: used, Multiple knife mill / granulator with rotor with 16 knives 6 stator knives Drive 90 kW With equipment Blodpfx Aksy Icdzs Eeg

Condition: used, Cutting mill / cutting mills Manufacturer: HERBOLD MECKESHEIM Bodpfx Asy Ib U Sok Eslg Type: SMS 80/160 Rotor 800 x 1600 mm wide Drive motor 250 kw

Condition: used, Drive 37kw (ca be changed to max. 75 kw) rotor diameter 500 mm Bledpfey Ib Eksx Ak Ejg rotor width 600 mm 5 knive scissor cut, housing hingeable, with 2 stator knives Opening inlet 500 x 600 mm

Condition: used, Granulator / Granulators Bedpfsy Ib D Hsx Ak Eolg Brand: HERBOLD Model: SMS 45/100-H5-3 Semi-open 5x2 knife rotor, 2 stator knife rows. Machine is equipped with replaceable third bed knife (deflector) to handle thick-walled materials. Infeed hopper for conveyor belt feeding. Rotor mounted outside the housing. Housing split in the middle, can be opened with a hand winch. Double inclined cut design: Rotor and stator knives are arranged opposite each other and cut like scissors. With base frame incl. vibration dampers. Machine data Rotor knives: 5 x 2 Stator knife rows: 2 Drive: 75 kW

Condition: used, Hollow body granulator and secondary granulator for pre-shredded material. Bodpfsy Ibwaox Ak Eolg Rotor diameter 450 mm Rotor width 600 mm 3 rotor knives (diagonal cut), 2 stator knives Drive motor 22 kw

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Bsdpfx Akjy Ibvvj Eslg Drive power 160-250 kw With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size

Condition: used, Feed opening: approx. 600 x 580 mm Rotor width: approx. 600 mm Bsdpfx Asy Ibivsk Eolg Rotor diameter: approx. 450 mm Stator knives: 2 Rotor knives: 4

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Drive power 160-250 kw With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size Bodpfx Aksy Ibiij Eolg

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Bljdpfx Aey Ia S Ajk Ejg Open F7 rotor with replaceable blade supports Drive power 160-250 kw With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size

Condition: good (used), Year of construction: 1998, functionality: fully functional, Equipment: documentation/manual, Hansa Food-Mix 2000 – Industrial Cream Aerator / Continuous Mixer (similar to Mondomix®) Bjdpfx Ajy I A Erek Eslg For sale is a powerful Hansa industrial mixer Food-Mix 2000, specifically designed for the continuous processing and aeration of cream and similar products under hygienic conditions. The machine impresses with its robust stainless steel construction, precise process control, and high production capacity – ideal for use in the dairy and food industries. - Manufacturer: Hansa Industrie-Mixer GmbH & Co. KG (Germany) - Model: Food-Mix 2000 (re-infection free) - Year: 1998 - Design: Stainless steel frame and housing - Mobile: Machine mounted on castors - Infinitely variable mixing head drive - Speed range: 80 – 450 rpm - Motor power: 9.2 kW - Foam density: 400 – 900 g/l (cream) - Specific feed density: 1,000 – 1,200 g/l (cream) - Throughput: approx. 300 – 1,500 kg/h (cream) - Dynamic stainless steel mixing head - Mixing head volume: approx. 9 litres - Separate cooling for rotor/stator possible - Can be sterilized with steam

Condition: used, axle configuration: 3 axles, first registration: 10/1992, suspension: air, tire size: 385/65 R 22.5, wheelbase: 9,070 mm, Year of construction: 1992, = Additional options and accessories = - Air suspension = Further information = Axle configuration Tyre size: 385/65 R 22.5 Axle brand: SAF Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Tyre tread left: 50%; tyre tread right: 50% Rear axle 2: Tyre tread left: 40%; tyre tread right: 40% Rear axle 3: Tyre tread left: 45%; tyre tread right: 45% Weights Unladen weight: 9,000 kg Payload: 30,000 kg Gross vehicle weight: 39,000 kg Bodpey I Azyofx Ak Eolg Condition Damages: none Identification Registration number: OB-30-ZK

Condition: good (used), Production capacity of up to 4000 b/h (depending on the format) For formats between 0,25lts up to 3lts Composed by: • Oven for heating the preforms composed of 6 heating modules with 8 infrared lamps each • Preform transfer Wheel • Two-stage compressed air blowing body, low pressure pre-blowing and subsequent high pressure blowing. Bsdpfx Akowcggve Eelg • Bottle transfer Wheel • Delivered with pallet turner. DOCUMENTATION AVAILABLE

Year of construction: 2013, condition: used, We offer you a used PET bottle crusher of the manufacturer BOREMA, type R-1200 F, year of construction 2013, for residual emptying, deaeration and pre-compaction of the fed PET bottles, from 0.3 up to 2.5 l content. The machine has a chassis and can be moved into and out of the feed chute of your baler. The machine has a throughput capacity of approx. 85,000 bottles/h, corresponding to approx. 3t/h. We have the following technical information: Manufacturer: BOREMA Umwelttecjhnik AG Type: R-1200 F (with trolley for retracting and extending) Year of manufacture: 2013 Drive power: 11 kW Connected load: 15 kW Rated current: 32 A Back-up fuse: 40 A Bedpfxeu Thpno Ak Eelg Type of construction: Continuous system Function: Double rotor press system Rotor pretension pneumatic: approx. 16t Overload protection: by anti-blocking system Input material: PET disposable and returnable empty bottles 0.3 to 2.5 L capacity Input material: HDPE bottles and canisters up to 3 l capacity Throughput capacity: approx. 3 t/hour, corresponding to approx. 85,000 bottles/hour, depending on size Required compressed air output: G1/2", 8 bar, 40 l/min. Compression ratio: 1:3 Flange dimensions inside: 972 x 1220 mm Feed opening: 565 x 1280mm Weight: approx. 2500kg Possible applications: Due to the chassis, the PET flattener can be moved into the feed chute of your baler as required, thus ensuring residual emptying, venting and pre-compaction of the fed bottles and canisters. When the material is changed, the PET flattener is simply moved out of the feed chute again and paper, cardboard, film, etc. can now be pressed further without using the flattener. Process of the BOREMA PET crusher: The plastic packages are drawn in by two rotating shafts. One of the rotating shafts is pneumatically pretensioned by two air bellows and presses the PET bottles with 16 t of pressure against the second rotating shaft. In the process, the closed plastic bottle is squeezed together, caused to burst and vented. Residual liquids run out and the material falls into the baler in a precompressed state. When impurities are introduced, the pneumatically pre-tensioned shaft deflects to the side and the impurities are channeled through. Significant advantages compared to conventional PET perforators with punching mandrels or knives: The BOREMA process is much more efficient and less subject to wear than conventional PET perforators with punching mandrels or knives. The biggest advantage is that any foreign matter such as metal parts, stones, bottles with frozen contents and pieces of wood are passed through the pneumatically deflecting rotor shaft without stopping the operation of the system or causing any major damage. With conventional perforators, mandrels or blades sometimes break off or become so jammed with the interfering material that the plant has to be shut down and repaired at great expense. Comments: The crusher is in good condition, was dismantled from the running operation, stored, is available at short notice and after assembly immediately ready for use. The documentation (manual, CE, electrical/hydraulic circuit diagram) is complete. An inspection is possible by arrangement. The technical information is taken from sales brochures, the operating instructions or other information provided by the manufacturer. We accept no liability for incomplete or incorrect data and informations.

Year of construction: 2018, condition: good (used), functionality: fully functional, machine/vehicle number: 180159, For sale is an auxiliary granulator from the premium manufacturer Wanner Technik, model Xtra2-A. The machine was built in 2018 and is ideal for granulating plastic sprues directly beside the injection molding machine. The machine is fully operational, well maintained, and ready for immediate use in your plastics recycling process! Model: Xtra2-A Serial Number: 180 159 Year of Manufacture: 03/2018 Power: 1.5 kW (robust geared motor for high torque) Voltage: 400 V (3-phase) Frequency: 50 Hz Current: 3.4 A Cutting chamber opening: 260 x 260 mm Rotor speed: approx. 32 rpm (slow) Special feature: Screenless technology—the particle size is determined by the tooth width of the rollers, typically 4 mm or 5 mm. Transport and loading can be arranged at extra cost on request. Europe-wide organization possible. Prices are net plus VAT. Inspection by appointment is possible. Please contact us; our team will be happy to assist you. Trade-in or exchange possible! Blsdpsy Hi Taefx Ak Esg Machinery purchase/sale BUY / SELL PRODUCTION & METALWORKING MACHINES AND MORE. Gjbn N Ay Dowza Dxogoil Do you need a high-quality, affordable metalworking machine for your production? Or are you looking to sell yours? For further information or to get in touch, please visit our website.

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 06/1999, loading space length: 11,750 mm, loading space width: 2,550 mm, loading space height: 3,800 mm, loading space volume: 34 m³, total length: 11,750 mm, total width: 2,550 mm, total height: 3,800 mm, suspension: air, tire size: 385/65-R22.5, Year of construction: 1999, Equipment: ABS, = Additional Options and Equipment = - BPW axles - EBS - Lifting axle - Alloy wheels - Air suspension - Drum brakes = Remarks = 1999 FELDBINDER food-grade tank semi-trailer, year of manufacture 2000, with a capacity of 33,500 liters / 2 compartments (8,000 l + 25,500 l + movable partition wall), including pump (brand: IBEX PUMPE), ABS/EBS, 3x BPW axles with disc brakes, 1st axle = lift axle, ALCOA rims, unladen weight: 7,200 kg, gross vehicle weight: 34,000 kg, tires 385/65-R22.5 (tread depth left: 7/5/5 mm; tread depth right: 8/7/7 mm) = Further Information = Axle configuration Tire size: 385/65-R22.5 Axle brand: BPW Eco-Plus Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Alloy wheels; lift axle; max. axle load: 9,000 kg; left tire tread: 45%; right tire tread: 50% Rear axle 2: Alloy wheels; max. axle load: 9,000 kg; left tire tread: 30%; right tire tread: 45% Rear axle 3: Alloy wheels; max. axle load: 9,000 kg; left tire tread: 30%; right tire tread: 45% Weights Unladen weight: 7,200 kg Payload: 26,800 kg Gross vehicle weight: 34,000 kg Functional Body manufacturer: FELDBINDER TSA33.3-3 Number of compartments: 2 Pump: Yes Condition Technical condition: good Blodpoy Igi Iefx Ak Eeg Visual condition: average Further information Please contact Arne Honingh for further details.

Condition: good (used), axle configuration: 1 axle, permissible axle load (axle 1): 9,000 kg, first registration: 02/2000, loading space length: 11,750 mm, loading space width: 2,550 mm, loading space height: 3,800 mm, loading space volume: 30 m³, total length: 11,750 mm, total width: 2,550 mm, total height: 3,800 mm, suspension: air, tire size: 385/65-R252.5, Year of construction: 2000, Equipment: ABS, = Additional Options and Accessories = - BPW axles - EBS - Lift axle - Alloy wheels - Air suspension - Disc brakes = Notes = 2000 FELDBINDER food-grade tanker trailer with a capacity of 29,500 liters, single compartment, two swing-out sideboards, including pump (brand: IBEX PUMP), ABS/EBS, 3x BPW axles with disc brakes, 1st axle is a lift axle, ALCOA wheels, unladen weight: 7,200 kg, gross vehicle weight: 39,000 kg, tires: 385/65-R22.5 (tread depth left: 10/6/10 mm; tread depth right: 5/6/10 mm) = Further Information = Axle configuration Tire size: 385/65-R22.5 Axle brand: BPW DISC Brakes: Disc brakes Suspension: Air suspension Rear axle: Alloy wheels; max. axle load: 9,000 kg; tire tread left: 60%; tire tread right: 60% Weights Unladen weight: 7,200 kg Payload: 31,800 kg gvw: 39,000 kg Functional Superstructure brand: FELDBINDER TSA33.3-3 Number of compartments: 1 Pump: Yes Condition Technical condition: good Optical condition: good Further information Bljdoy Idwiepfx Ak Ejg Please contact Arne Honingh for more information.

Condition: used, 2.5 t/h copper cable granulation line consisting of: 1. Two turbo mills, each 90 kW, plus one additional as spare, 2. Dry separation table MTB T1000XT1500, 3. 1 linear screen, 4. 2 wet separation tables, Bodpfey Ibghox Ak Eolg 5. Fans, cyclone, piping, and filter. This line can process unsorted copper cables with steel attachments, shredded copper from electric motors, and WEEE scrap < 15 mm. Production capacity is 2,500 kg per hour for copper cables. Available for inspection in Thiva, Greece.

Condition: used, Materials that can be processed (preshredded): Bjdpfx Ajy Ibblsk Eslg - Municipal & industrial waste - Plastics & composites - E-scrap & cables - Tires & rubber - Paper, textiles & light materials It is available for inspection in Thiva, Greece.

Condition: good (used), axle configuration: 1 axle, permissible axle load (axle 1): 9,000 kg, first registration: 11/1999, loading space length: 11,750 mm, loading space width: 2,550 mm, loading space height: 3,800 mm, loading space volume: 34 m³, total length: 11,750 mm, total width: 2,550 mm, total height: 3,600 mm, suspension: air, tire size: 385/65-R252.5, Year of construction: 1999, Equipment: ABS, = Additional options and equipment = - BPW axles - EBS (Electronic Braking System) - Lifting axle - Alloy wheels - Air suspension - Drum brakes = Remarks = 11/1999 FELDBINDER food-grade tank semi-trailer with a capacity of 33,500 l, 3 compartments (Compartment 1: 8,000 l / Compartment 2: 22,500 l + 1 partition / Compartment 3: 3,000 l), including pump (Brand: IBEX PUMP), ABS/EBS, 3x BPW axles with drum brakes, 1st axle is a lift axle, ALCOA wheels, unladen weight: 7,200 kg, gross vehicle weight: 34,000 kg, tyres 385/65-R22.5 (tread depth left: 8/14/12 mm; tread depth right: 11/13/13 mm) = Further information = Axle configuration Tyre size: 385/65-R22.5 Axle brand: BPW DRUM Brakes: drum brakes Suspension: air suspension Bledpfx Akjy H Ixho Eeg Rear axle: alloy wheels; max. axle load: 9,000 kg; tyre tread left: 12%; tyre tread right: 13% Weights Unladen weight: 7,200 kg Payload: 26,800 kg Gross vehicle weight: 34,000 kg Functionality Superstructure brand: FELDBINDER TSA33.3-3 Number of compartments: 3 Pump: yes Condition Technical condition: good Visual condition: good For more information Please contact Arne Honingh for further details.