Used Pelletieren Press for sale (12,390)

Year of construction: 1997, condition: ready for operation (used), - USED - 6-AXIS SYNCHRONIZED CNC PRESS BRAKE WITH HYDRAULIC CROWNING Hnedpfjzz Tykex Agtet AXIS: Y1 - Y2 - X - R - Z1 - Z2 BENDING LENGTH: 3100 mm TONNAGE: 150 ton THROAT DEPTH: 400 mm DISTANCE BETWEEN UPRIGHTS: 2600 mm UPPER BEAM TRAVEL: 415 mm MOTOR POWER: 15 kW CONTROL UNIT: CYBELEC DNC 900 WEIGHT: 12800 Kg OVERALL DIMENSIONS: 4000 x 2400 x 3200 mm ACCESSORIES: HYDRAULIC TOOL LOCKING ; HYDRAULIC CROWNING

Condition: good (used), Code: 0478 Brand: ITALPRESSE Model: V/2 Mechanical press for cold gluing Equipped with a motor that is operated by a switch with automatic return. This switch controls the movements of the mobile platen towards or away from the panels, while the required pressure and the release are controlled by a handwheel, which is on the side of the press. This system allows for maximum pressure with minimum effort Platen dimension mm 2200 x 1000 Opening mm 650 Pressure screw n°2 Installed power Hp 0,75 Hedpozz Szaefx Agtent Overall dimensions: mm 2550 x 1000 x 1650 h Weight kg 750

Condition: good (used), Year of construction: 2012, Used press brake from Knuth Capacity: 4100 x 250 tons Hodpfozz Rz Sex Agtent Cybelec DNC 880S CNC control Y1, Y2, X and R axis CNC Hydraulic crowning Amada / Euro top clamp 1 set of complete tooling

Condition: excellent (used), Year of construction: 1994, Clamping unit: Clamping force: 7,000 kN Operating pressure: 250 bar Specific pressing pressure: 610 N/cm² Hnjdpfezz Rdyex Agtot Number of stages: 2 Installation height with 75 mm heating plate & 20 mm insulating plate: approx. 2 x 190 mm Piston stroke: approx. 400 mm Piston 1 diameter: 543 mm Clamping force, rapid traverse: approx. 2 x 85 kN Retraction force: approx. 2 x 47 kN Piston 2 diameter: 60/40 mm Weight, approx.: 16 t Hydraulics: Pressure setting: 40 - 300 bar Flow rate regulation: 0 - 99 % Flow rate l/min (HD): 45 at 300 bar Drive power: 22 kW Tank dimensions (L x W x H): 1,000 x 770 x 535 mm Closing speed: Rapid traverse: approx. 40 - 50 mm/s Slow closing: approx. 0 - 20 mm/s Pressing stroke: approx. 0 - 3 mm/s Slow opening: approx. 0 - 20 mm/s Opening, rapid traverse: approx. 0 - 60 mm/s

Condition: good (used), Year of construction: 2005, functionality: fully functional, Clamping force: 4,900 kN Operating pressure: 206 bar Heating plate dimensions: 700 x 700 mm Piston diameter: 558.8 mm Stroke: 250 mm Daylight opening: 300 mm Max. weight of the heating plates: 560 kg Oil tank: 1,100 L Rated power: 82 kW Heating power: 56 kW Hnodpfx Agozz Rdtjtet Vacuum motor power: 4.0 kW Light curtain, distance to the tool area: 810 mm Stroke of the vacuum cover: 200 mm Machine dimensions: 3,975 x 2,935 x 2,555 mm Equipped with an overhead crane (monorail) with three chain hoists Manufacturer: STAHL Year of manufacture: 2011 Lifting capacity: 3 x 400 kg Length of the overhead crane: approx. 3,500 mm Mobile carriage Lifting capacity: 400 kg Lifting height: 3,000 mm Lifting speed, main lift: 4 m/min Lifting speed, fine lift: 1 m/min The vulcanizing press from the manufacturer PAN STONE was used by a renowned German company in the sealing technology sector. This company is known for its high quality and innovation in sealing production. It has always been professionally maintained and is in good condition.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Closing force: 635 kN Operating pressure: 206 bar Piston diameter: 200 mm Hnjdpfx Agszz Rdgjtet Stroke: 140 mm Daylight height: 150/180 mm Heating plate dimensions: 250 x 300 mm Max. weight of the heating plates: 70 kg Oil tank: 100 l Rated power: 19.66 kW Heating power: 9.6 kW Vacuum motor power: 2.6 kW Light barrier, distance to the tool area: 270 mm Stroke of the vacuum cover: 140 mm Dimensions: 2,650 x 2,100 x 2,100 mm The vulcanizing press from the manufacturer PAN STONE, type S-V-65-2RT-PCD, was used by a renowned German company in the sealing technology and electromobility sector. This company is known for its high quality and innovation in sealing production. The machine was part of a production line responsible for manufacturing high-performance seals used in various industries. It was always professionally maintained and repaired, which explains its very good condition. This press offers you the opportunity to invest in a proven technology that has been used by a leading company in Germany.

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, Clamping unit Heating output of the heating plate: 0.48 kW per heating element / 0.9 kW per 8 heating elements Clamping force: 1,000 kN Piston stroke: approx. 250 mm Clamping cylinder: approx. 260 mm Piston 1 diameter: 240 mm (main cylinder) Clamping force, rapid traverse: approx. 2 x 500 kN Retraction force: approx. 2 x 600 kN Piston 2 diameter: 35 mm (clamping cylinder) Hnedpfezz Rdajx Agtet Dimensions of the heating plates: 550 x 600 mm Machine dimensions Length: 2,600 mm Width: 2,100 mm Height: 2,100 mm Weight (estimated): approx. 5 t

Condition: used, Single-column eccentric press KRUPP, type PEKRD 125 h Machine No. 2861, Year of manufacture 1977 Pressing force: 125 tons Reach: 400 mm Table size: 950 x 750 mm Ram area: 800 x 540 mm Table opening: 100 x 250 mm Stroke adjustment: 8 to 160 mm Ram adjustment: 100 mm Installation height for maximum stroke at the top: max. 550 mm Stroke rate: 60 strokes/min. Table height above floor: 800 mm Motor power: 10 kW Hnsdpfx Asdzqddjgtot Power connection: 380 volts, 50 Hz - Hydraulic overload protection in the ram - Pneumatic clutch and brake combination ORTLINGHAUS - Ram weight compensation cylinder - Motorized ram adjustment - Tabletop with ball bearings - Two-hand operation - Central lubrication system HELIOS - Stroke counter - UVV 7n 5.1 §4a, paragraph 2, No. 3b for manual feeding operations Space requirement L x W x H: 2300 x 1800 x 3200 mm Weight: approx. 10 tons Good condition (very little use)

Condition: used, Single-column pneumatic press, hydraulic press PAUL ANTON type PVT 2 Pneumatic table press, embossing press Hsdpfxjtrpiis Agtent No. 97148 Year of manufacture approx. 1980 Compressive force: 10 ton throat depth: 100 mm Ram stroke: approx. 25 mm Plunger surface: Ø 32 mm Table size: 250 x 220 mm Table opening: 53 x 53 mm Table height: 1060 mm Installation height: 155 mm - Very stable construction - Hydro-pneumatic press with air to oil pressure ratio - Pneumatic foot switch - ram with M12 internal thread - Metal base Space requirement L x W x H 850 x 620 x 1560 mm Weight approx. 200 kg good condition

Condition: excellent (used), Year of construction: 2009, Used 3-meter Safan E Brake Type: E Brake 100 3100 TS1 Capacity: 3100 x 100 tons Hjdpfxozz N R Es Agtent E Control CNC control system Y1, Y2, X, R, Z1, and Z2 CNC control Wila New Standard hydraulic top clamping system Year of manufacture: 2009 New PC installed

Year of construction: 1997, condition: used, Bürkle Multifoiler Model BTF 1628/60 Hnsdpfx Ajzz Ny Tsgtjt Year of manufacture: 1997 System for coating flat and shaped MDV (medium-density fiberboard) parts with thermoplastic films, either from a roll or as cut pieces, for films such as PVC, PP, high-gloss PVC, and ABS. Suitable for thermoforming or membrane pressing processes. Maximum part size: 1250 x 2550 mm Part thickness: 6-35 mm Heating plate dimensions: 1600 x 2800 mm Maximum heating temperature: 140°C Stroke: 230 mm Control system: Siemens Total power consumption: 38 kW Includes 2 aluminum tables and a spare table Includes a PIN table Weight: 16.5 t

Condition: good (used), Refurbished machine Basic machine starts at 145.000 € net *Options at additional cost, see below with a full 1 year warranty one machine is directly available Technical specifications: Throughput up to 1200 kg / h depending on the material (e.g. sawdust with a bulk weight of 150/180 kg / qbm) Briquette Ø 75 mm including 2 m press channel Main motor power 45 kW Feed screw gear motor 2 x 2.2 kw Compressor screw 2 x 5.5 kw Distribution auger 2.2 kw Hydraulic pump motor 0.37 kW Total connected load 65 KW Control panel with plain text display for operating states and utilization display for main drive and feed screws PLC control Siemens S7 / 300 with operating hours counter in the control cabinet Machine hat CE mark Automatic start / stop function of the machine Dimensions 3100x860x1800 mm lxwxh Weight 4500 kg Hedpfxo E Dquo Agtont Optional Equipment – Additional Charges Temperature Control Unit for the Pressing Tools For maintaining the required temperature to ensure optimum briquette quality. Temperature control for pump, cooling unit, fan and pressure switch. Ready-wired for connection – mandatory for operation. Including corresponding control system: €3,990 net Cut-to-Length Device For cutting the briquettes to the required length: €5,750 net Compressed air connection required. Silo for MAP Series €19,970 net Storage silo installed above the machine Capacity: approx. 6 m³ Robust steel construction with agitator discharge system and level sensor Conveyor Line / Cooling Section (Nominal length: 5 × 2 m) €750 net per 2 metres Assembly / commissioning (nominal value approx. 2-3 days on site to install one press) based on effort and upon proof against separate invoice. The following sentences apply: Service technician/mechatronics technician per assembly and hour of travel: €129.00 Overtime: 25% surcharge 50% surcharge per Saturday and night hour 100% surcharge for every Sunday and public holiday hour Release per fitter per day: country dependent Per car, van and driving kilometer: €0.98 / km Arrival and overnight stay against receipt or flat rate bill at the client's expense. . Test with the respective customer material: (up to a maximum of 750 kg) - €1,970 net flat rate --- Recognition from the raw material: - The moisture content must be between a minimum of 6 and a maximum of 18% - Maximum span 20 mm - Excessive temperature: temperate room at at least + 5 ° C. - The loading must be free of metals and mineral impurities. This and the pressing tools and / or responsible wear can be the result

Condition: good (used), Year of construction: 2008, Technical data: Printing Section 5 × UV Flexo Printing Units 5 × UV Dryers Web Inspection BST PowerScope 300 – Web Inspection System Unwinder Max roll diameter: 1250 mm Heavy-duty construction with pneumatic shaft and web tension control Hjdoz A Thbepfx Agtsnt Integrated splicing table and web guiding system Rewinder Max roll diameter: 1250 mm (≈ 40 inch) Cold Foil / Lamination Module Enables in-line application of cold foil or over-lamination for premium label finishes (metallic, protective film, etc.) Turn Bar (Web Inversion Unit) Allows reverse-side printing or lamination – flexible for multi-layer label applications Rerailing Section 24” Supports reprocessing or secondary processing of pre-printed materials Additional Modules Die-cutting unit EM 510 (for use with magnetic cylinder, adjustable for gap) Cross-Cutting Cylinder (inline sheeting or perforation – precise longitudinal or transverse cutting) Punching Units (adjustable punching length from 12” to 26”, ideal for perforations, registration holes, or special die-cut shapes in-line)

Condition: good (used), Altinisik Makina 1020 Flexographic Printer The machine is fully operational and ready for production. Like-new condition. Hjdpfx Ajzz Hh Ijgtjnt Made in Turkey. Max sheet size: 1020 x 2400 mm Min sheet size: 300 x 700 mm Speed: 7000 sheets/h Vacuum feeder

Condition: good (used), Cauhe S-IV A 120×160 Hot Stamping Press The machine is fully operational, like new. Made in Spain. Format: 1200x1600mm Weight: 10,000kg Power supply: 380V Motor: 11 kW Impact force: 2 Tm/dm² Equipment: – Pneumatic clutch and brake Hedpfszz Hg Dex Agtent – Control panel – Full-format heating plate with 3 heating sections – 3 operating modes: continuous, time-delayed, manual – 3 independent foil feeds – Central automatic lubrication – Additional safety guards – Operating tools – Press plate

Condition: ready for operation (used), Year of construction: 2013, Brand: HSM Type: V-Press 1160 plus Year of manufacture: 2013 Pressing force: 532 kN Hnedpfx Agez A S A Retst Voltage: 400 Max. bale weight: up to 550 kg (depending on the material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2403 kg Machine dimensions: 180 x 157 x 298.5 cm Dimensions of the feed opening: 119.5 cm x 65 cm The HSM 1160 V-Press features easy operation, a powerful pressing force, and is energy-efficient. Are you looking for a more compact model? Then take a look at the HSM 860 – ideal for those who want to save space without compromising on pressing force. Video available upon request!

Condition: used, Year of construction: 2001, - 4 x Flexographic printing unit - 4 x UV curing system (GEW) Hsdpfx Aszz Hplegtjnt - BST bkr 1000 web guiding system - Camera inspection system - 2 x Rotary die-cutting unit - Slitting unit - Anilox roller with (68/72/78/80/88/96/102 cells) + matching magnetic roller - Additional accessories, if available

Condition: used, Fortuna A4E Automatic Roll Divider and Rounder Fully automatic dough dividing and rounding machine 30-piece division With rounding stop Hodpfx Agoz A Sgpotsnt With electrically tilting head (for cleaning) Dough piece weight: 1,200-3,300 g Weight (per dough piece): 40-110 g External dimensions (L x W x H), without base frame: 800 x 720 x 1510 mm Machine weight: approx. 555 kg Includes 3 rounding plates (new) Optional: Base frame with fixed feet Base frame with castors (2 swivel castors with brakes + 2 fixed castors)

Condition: used, Fortuna A4E Automatic Roll Divider and Rounder Fully automatic dough dividing and rounding machine 30-piece division With rounding stop With electrically tilting head (for cleaning) Dough piece weight: 1,200-3,300 g Weight (per dough piece): 40-110 g External dimensions (L x W x H), without base frame: 800 x 720 x 1510 mm Machine weight: approx. 555 kg Includes 3 rounding plates (new) Hnjdpfxoz A Sk Io Agtst Optional: Base frame with fixed feet Base frame with castors (2 swivel castors with brakes + 2 fixed castors)

Condition: used, Fortuna A4 Automatic Roll Former Fully automatic dough dividing and rounding machine 30-piece division With rounding stop function Tilting head via hand crank (for cleaning) Dough weight range: 1,200-3,300 g Weight (dough piece): 40-110 g External dimensions (L x W x H), without base frame: 800 x 720 x 1510 mm Hsdpjz A Sk Uefx Agtsnt Machine weight: approx. 555 kg Includes 3 rounding discs (new) Optional: Base frame with fixed feet Base frame with castors (2 swivel castors with locking brake + 2 fixed castors)

Condition: used, Fortuna A4 Automatic Roll Divider and Rounder Fully automatic dough divider and rounder 30-piece division With rounding stop Tilting head via hand crank (for cleaning) Hnedpfx Aez A Stiegtjt Dough weight range: 1,200-3,300 g Weight per dough piece: 40-110 g External dimensions (L x W x H), without base frame: 800 x 720 x 1510 mm Machine weight: approx. 555 kg Includes 2 rounding plates Optional: Base frame with fixed feet Base frame with casters (2 swivel casters with brakes + 2 fixed casters)

Condition: used, Fortuna Semi-Automatic Bread Roll Press 4 Hsdpsz A St Asfx Agtent 30-division Dough weight: 1,200-3,300 g Weight range: 40-110 g Includes 3 forming plates Optional: Base frame with fixed feet Base frame with castors (2 swivel castors with brakes + 2 fixed castors)

Condition: used, Fortuna A3E Automatic Bread Roll Former Fully automatic dough divider and rounder 30-piece division With rounding stop Tilting head via hand crank (for cleaning) Dough piece weight: 960-2100 g Weight (dough piece): 32-80 g External dimensions (W x D x H), without base frame: 690 x 800 x 1470 mm Machine weight: approx. 540 kg Hnedpfx Aez A Snajgtet Includes 3 rounding plates (new) Optional: Base frame with fixed feet Base frame with castors (2 swivel castors with brakes + 2 fixed castors)

Condition: used, Fortuna A4 Automatic Roll Former Fully automatic dough dividing and rounding machine 30-piece division With rounding stop function Tilting head via hand crank (for cleaning) Dough weight range: 1,200-3,300 g Weight (dough piece): 40-110 g External dimensions (L x W x H), without base frame: 800 x 720 x 1510 mm Machine weight: approx. 555 kg Includes 3 rounding discs (new) Hnsdpez A Sm Nsfx Agtst Optional: Base frame with fixed feet Base frame with castors (2 swivel castors with locking brake + 2 fixed castors)

Condition: used, Fortuna A4E Automatic Roll Former Hnedpfoz A Sgiox Agtst Fully automatic dough dividing and rounding machine 30-piece division With rounding stop function With electrically tilting head (for cleaning) Dough weight range: 1,200-3,300 g Weight per dough piece: 40-110 g External dimensions (L x W x H), without base: 800 x 720 x 1510 mm Machine weight: approx. 555 kg Includes 3 rounding plates (new) Optional: Base with fixed legs Base with castors (2 swivel castors with brakes + 2 fixed castors)