Used Pass Drill for sale (5,841)

Condition: used, Year of construction: 1962, frequency 50 Hz voltage 380 V 220 V connected load 2,6 kVA rated current 6,1 A Kledpfjrxg S Tox Ah Njl weight of the machine ca. 1 t

Condition: used, Year of construction: 1980, 1980 Klodpfxor Dv Tgj Ah Nsl tool taper MK 205 - 1450 m/min. boring range: 3 - 40 mm +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1990, ja vice 1 quill stroke ja 2.000 mm weight of the machine ca. 790 kg Klsdpfx Ahofym Huj Nol +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1979, taper MK MK5 round table ja weight of the machine ca. 1.200 kg +++++ Please note: Kjdpfxsf Ek Rij Ah Njll The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1980, ja feed 80 - 800 m/min Kjdpfx Ahsix Rdmo Nsll 1848 weight of the machine ca. 2,2 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 2008, operating hours: 5,834 h, 2008 | Delmag SR 25 BT / RH 18 on Sennebogen SR25 with ABI MDBA 3500 Soil Improvement Rig | Used Drill | 5834 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 220000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* Klsdpfx Ahox Uyzqj Nol 👷‍♂️ Inspected by an independent expert 65 inspection points 65 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The machine is used for concrete pile drilling, soil improvement, and vibration tamping. The carrier vehicle is a Sennebogen SR25BT (built in 2008) with a Delmag RH18 drilling attachment (built in 2009). The drill table lift is 12.50m, total height is 19.91m. The outreach is 3.165 - 4.00m. It includes a winch for the feed with freewheel, auxiliary winch, and rear platform. The drill table is an SHT25, and the KDK rotary drilling head BT180-2 is not included. The machine is purely a soil improvement device, equipped with a MBDA 3500 ABI drill gearbox. It has a single auger. No Kelly bar is included. It features mast support cylinders and alignment automation. The hydraulic telescopic undercarriage has a width that adjusts from 3.0m to 4.40m. The CAT C9 engine was overhauled by CAT in 2015 at 3,304 operating hours. Drills and drill accessories are available separately. Also available is a mobile mixing plant, manufactured by MAT, which includes a mixing container (throughput capacity of 20m3/h), a conveyor screw, a mixing container (capacity 4,000l), and a plunger pump with remote control. The machine’s condition corresponds to its operating hours. During the inspection in 2023, the machine was running and functioning without any issues. As of October 2024, wear and tear have occurred on the valves, controls, and hydraulic hoses. It is not possible to operate the machine with two attachments simultaneously. The machine shows wear on bolts, bushings, and general usage marks (dents, scratches, etc.) consistent with its age, operating hours, and usage. The machine was not tested under load. It has been used with 55 and 80 paddles. After service and maintenance of the wear and tear, the machine will be ready for operation. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "33244 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: excellent (used), Control: Heidenhain TNC 124 Travel X/Y/Z: 450/260/120 mm W-axis travel: 450 mm Clamping surface (L x W): 770 x 320 mm Permissible table load: 100 kg Distance table – spindle nose (min. – max.): 0 – 110 – 560 mm Kledpfx Aheipmmuo Njl Feed rate X/Y: 1 – 2000 mm/min Quick-change tool system: SF 32 Stepless speed range: 100 – 9200 rpm Drive power: 5 kW Required space (W x D x H): 1500 x 1480 x 2330 mm

Condition: new, Year of construction: 2026, The CORMAK Z5050 AUTO industrial drill is an advanced column drilling machine designed for professional metalworking in workshops and industrial plants. The machine offers high precision in drilling and tapping, as well as reliability even under intensive operation. The control system monitors operating parameters, preventing settings that could overload the mechanical components, which ensures safety and process stability. Key advantages of the CORMAK Z5050 AUTO drill Klsdpjyb A Rmjfx Ah Njl Precise metal machining thanks to a stable Ø180 mm column and a heavy-duty worktable measuring 545 × 470 mm. Safe operation – the system limits the possibility of setting parameters that could endanger the machine’s mechanics. Automatic spindle feed providing uniform feed during drilling and tapping. Integrated cooling system extending tool life and improving machining quality. Intuitive operation – a large touchscreen allows control of spindle speed, drilling depth, and feed settings. High performance – drilling up to Ø50 mm, tapping up to M30, maximum quill stroke of 245 mm. Ergonomic design – motorized table lifting and automatic tool ejection increase comfort and productivity. Design and technology The CORMAK Z5050 AUTO column drill features a massive column and a solid worktable, ensuring stability during drilling and tapping of heavy workpieces. The MK5 taper spindle works with an automatic feed system, while precise spindle guidance minimizes vibrations and deviations. The cooling system supports efficiency and operational safety during long-term use. Applications The CORMAK Z5050 AUTO column drill is used in professional mechanical and manufacturing facilities, including: Drilling in steel, aluminum, and other metal materials. Precision tapping of structural components. Machine manufacturing and servicing, industrial workshops, and machining plants. Standard equipment Touchscreen display SERVO feed motor Keyed drill chuck 3–16 mm / B18 Arbor MK5 / B18 Reduction sleeves MK5/4, MK4/3, MK3/2 Motorized table lifting Cooling system Tapping mode LED lighting Digital readout of spindle speed and drilling depth Safety guard Technical data Maximum drilling capacity: 50 mm Drilling capacity in cast iron: 60 mm Maximum tapping capacity: M30 Drill chuck: 3–16 mm / B18 Spindle taper: MK5 Minimum spindle speed: 50 rpm Maximum spindle speed: 2000 rpm Speed change: stepless (50–250 / 250–2000) Drive system: gearbox Automatic spindle feed – range: 0–765 mm/rev Drilling table tilt: –45° to +45° Max. spindle-to-column distance: 360 mm Max. spindle-to-table distance: 570 mm Max. spindle-to-base plate distance: 1170 mm Quill stroke: 245 mm Column diameter: 180 mm Table width: 545 mm Table depth: 470 mm T-slots: 14 mm Motor power S1 100%: 3.7 kW Voltage: 400 V Dimensions (W × D × H): 700 × 1050 × 2430 mm Weight: 760 kg

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, • Work table 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle Morse taper 4 (MK 4) • Infinitely variable speed control • Infinitely variable quill feed • Thread cutting attachment • Two 18 mm T-slots each on rear and left of machine base • 3-axis digital readout • Machine lamp • Central lubrication • Table top machined all around • Drill guard • Coolant system Dimensions and Travels Tool holder MK 4 Column diameter mm 195 Table size mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Quill stroke mm 220 Column travel mm 450 Distance spindle nose - table top min 40 mm, max 710 mm Distance spindle nose - base plate min 840 mm, max 1510 mm Drilling radius min 540 mm, max 1590 mm Work table height mm 900 Machining Capacities Drilling capacity (solid) St 60 ⌀ 45 mm GG 22 ⌀ 55 mm Tapping Ksdpfx Aex Uwpxeh Noll St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range min⁻¹ 15 – 2,800 Torque Nm max. 250 Constant from min⁻¹ 15 – 200 Feed Drives Feed, stepless mm/rev 0.02 – 0.7 Feed force N 12,000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight DANUFLEX 145 (without packaging) with table 750 x 1200 mm kg 2,600 Documentation Operating manual, incl. Lubrication and hydraulic system diagram Electrical wiring diagram

Condition: excellent (used), Paper drilling machine Nagel Citoborma 290 AB Year of manufacture: 2015 Item no.: L1131 The machine comes from a government authority. Condition: like new. Ksdpfx Asybbi Uoh Njll Very low usage.

Condition: excellent (used), functionality: fully functional, Data: Tool holder MK 5--- Drilling capacity with ST60 50 mm--- Infinitely variable speed ranges approx. 40 - 180 rpm + 180 - 800 rpm--- 5 feeds 0.1 / 0.14 / 0.2 / 0.28 / 0.4 mm/rev--- Table surface, 880 x 670 mm--- Kledpfeybbbwsx Ah Njl throat depth: 385 mm---

Condition: new, The KB 20 SV is a state-of-the-art Column Drilling Machine in the KB SFV Series, designed for robust performance in any workshop setting. This high-quality drill press excels in light drilling tasks, featuring a modern design with a precision-ground work table and an infinity variable drive that is virtually maintenance-free. Equipped with a user-friendly touchscreen control panel, operators can easily switch between drilling and thread-cutting functions, which enhances productivity for both single part productions and manual series batch jobs. The machine includes a powerful, quiet motor and a reliable belt drive, ensuring superior rigidity and performance under high loads. Standard equipment such as an integrated LED work lamp, drill chuck, and tool-holder bits enhance usability. With a drilling capacity of 20 mm and sturdy construction, the KB 20 SV is an excellent choice for anyone looking to optimize their Column Drilling Machine operations. Order online today to experience the efficiency of KNUTH machines in your facility. Kljdpeu E Nduofx Ah Nsl

Condition: new, The KB 32 SF from KNUTH is a robust column drilling machine that is essential for any workshop or industrial application. Designed with a modern aesthetic, this machine features a heavy, precision-ground work table equipped with diagonal T-slots for optimal functionality. Its smooth height adjustment mechanism allows for ease of use, even when handling heavy loads. The KB 32 SF boasts a powerful motor, a reliable belt drive, and an integrated LED work lamp, ensuring superior performance and visibility during operations. With a drilling capacity of 32 mm and a spindle mount of 3 MT, this machine is built to meet the rigorous demands of various drilling tasks. Additional features include a forward and reverse function, automatic direction reversal for thread cutting, and a sturdy base plate with parallel T-slots. Included in the standard equipment are a coolant system, drill chuck, tool-holder bits, a drill press vise, and necessary operating tools. Elevate your drilling capabilities with the KB 32 SF, a key addition to your column drilling machines lineup. Request a quote today to enhance your efficiency and precision in drilling operations. Klodouyiitopfx Ah Nel

Condition: reconditioned (used), Year of construction: 1999, Universal Tool Milling Machine TOS FNGJ 32 3-axis Heidenhain digital readout Ksdpfx Aoxc It Ieh Nell Year of manufacture: 1999 Travel: X 600 Y 400 Z 400 mm Spindle speed range: 40 – 2000 rpm Supplied with the following accessories: Fixed angle table, 800 x 400 mm clamping surface Vertical milling head Extendable quill Various SK 40 tool holders Safety guard Chip tray Machine lamp Automatic central lubrication pump for X, Y, Z axes Coolant system 4 machine leveling pads

Condition: refurbished (used), Year of construction: 1996, Universal tool milling machine KUNZMANN WF 4/3 With 3 axes Heidenhain digital readout Year of construction: 1996 Travels: X 400 Y 320 Z 400 Speed range: 40 - 2550 rpm Kjdpfx Ahsq Ulucs Njll With the following accessories: Rigid angle table 800 mm x 360 mm clamping surface Mechanical handwheels for X , Y , Z axis Hydraulic tool clamping Automatic central lubrication pump for X , Y , Z axis Machine light 4-piece machine shoes Coolant device Operating instructions THE MACHINE WAS ONLY USED FOR APPRENTICE TRAINING !!! THE MACHINE IS IN GOOD CONDITION !!!

Condition: reconditioned (used), Year of construction: 1984, Universal Tool Milling Machine DECKEL FP 3 With 3-axis active digital display Heidenhain TNC 11 Year of manufacture: 1984 Travel: X 500 / Y 300 / Z 400 mm Speed range: 25 – 2500 rpm Including the following accessories: - Rigid angle table, 850 mm x 400 mm clamping surface - Swiveling rotary table Ø 450 mm with dividing disks - Slotting head - Movable vertical milling head - Extendable quill for drilling - Infinitely variable feed via potentiometer - Various milling arbors SK 40 / S22 x 2 - Chip tray - Automatic central lubrication pump for X, Y, Z axis Kljdpsxuh Rdofx Ah Nol - Machine lamp - Coolant system - 4 machine feet - Operating manual

Condition: reconditioned (used), Year of construction: 1992, With VE 320 electronic Year of manufacture: 1992 Drilling capacity in steel: 32 mm Kledpoxc Iw Hsfx Ah Nsl Thread cutting device Mechanical feed infinitely variable via potentiometer Clamping surface table: 500 mm x 360 mm Drilling depth adjustment with digital display Protective device Drilling depth: 150 mm Spindle taper: MK 3 Spindle speeds 140 rpm – 1400 rpm stepless with digital display Drill table illumination

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, High precision drilling and milling machine Fehlmann model Picomax 51 CNC Heidenhain TNC 360 very good condition CE conform Hthrgw39X Technical Data: >> Year of construction: 1995 >> Travel X/Y/Z 420/ 240/ 120 mm Kjdpfx Ahsuxprlj Nsll >> Travel distance W 450 mm >> Clamping surface (L x W) 730 x 280 mm >> Permissible table load 75 kg >> Distance table - spindle nose 0 - 560 mm >> Feed speed X/Y 1 - 7200 mm/min >> Feed speed Z 1 - 3600 mm/min >> Tool quick-change system SF 32 >> Infinitely variable speed range 9200 rpm >> Drive power 4 kW >> Space requirement approx. (W x D x H) 2.0 x 1.5 x 2.4 m >> Fourth axis dividing head About the machine : We offer a high-precision drilling and milling machine Fehlmann model Picomax 51 CNC in very good condition with CE conformity. It has a Heidenhain TNC 360 contouring control. The program creation in the user-friendly Heidenhain plain text dialog is particularly easy. HEIDENHAIN TNCs are workshop-oriented contouring controls with which you can program conventional milling and drilling operations directly on the machine in easy-to-understand plain-language dialog. The tool holders (see pictures) are included. Mechanically and electrically tested. Take the opportunity to inspect and try out this machine under power on site.

Condition: ready for operation (used), A pillar drilling machine in double column design Ecker und Schmidt is available. Number of spindles: 2, drilling capacity in steel: 23mm, throat depth: 330mm, drilling stroke: 120mm, max. workpiece height: 750mm, spindle taper: MK1, column diameter: 130mm, table dimensions X/Y: 760mm/360mm. Machine dimensions X/Y/Z: approx. 1100mm/1150mm/2100mm, weight: approx. 700kg. On site inspection is possible. Kledpfxoya Hxle Ah Nel

Condition: like new (used), Year of construction: 2021, Machining centre, drilling centre Biesse Brema Eko 2.1 Year of manufacture: 2021 X: 200 – 2600 mm Y: 35 – 900 mm Z: 8 – 60 mm Tool magazine: 8 positions Traverse speeds: Klsdpfx Ahoya Eics Nol X/Y-axis: up to 65 m/min Z-axis: up to 20 m/min

Condition: good (used), Year of construction: 1987, travel distance X-axis: 11,500 mm, travel distance Y-axis: 4,500 mm, travel distance Z-axis: 2,000 mm, x-travel 11,500 mm y-travel 4,500 mm w-axis 1,600 mm z-axis 2,000 mm Spindle diameter 200 mm Ksdpfoya Eauex Ah Nsll Rotary table 3,000 x 4,000 mm Bed length of rotary table 4,600 mm Tool holder SK50 Workpiece weight on rotary table 80 t Total power requirement 83 kW Additional information incl. 15 plates

Condition: good (used), Year of construction: 1983, travel distance X-axis: 6,000 mm, Spindle diameter: 200 mm Machining width: 6000 mm Machining height: 3150 mm Max. machining depth: 1985 mm Slide cross-section: 530 x 550 mm Table load: 20 t Plate field size: 16800 x 5500 mm Kjdpfsya D Uksx Ah Njll Tool holder: SK 60 Approx. machine weight: 173 t Additional information: - Additional equipment: large and small angular head - Offer number: 22979 - Table is the S20 MP model, table size: 2200 x 2500 mm - Machining width on the machine X-axis (X-Way): 6000 mm - Including 6 plates, each 5600 mm x 1850 mm

Condition: new, Technical data: Number of spindles: 42 (21 + 21) Spindle pitch: 32 mm Total spindle width in head: 640 mm Working table height: 860 mm Working table dimensions: 885 x 349.5 mm Motor: 2 x 1.5 kW/2 HP Motor speed: 2800 rpm Operating pressure: 6/8 bar Air consumption: 10 liters per cycle Extraction nozzle diameter: 80 mm Power supply: 380 V Overall dimensions: Kodjya Dfvopfx Ah Nell Width: 1070 mm Depth: 1035 mm Height: 1505 mm Net weight: 366 kg

Condition: good (used), Year of construction: 2001, For the commission-driven drilling and pressing of hinges as well as drilling Of handle and lock holes and indentations for special fittings and additional bores Up and down at doors. Workpiece dimensions: • Length: 300 mm 2500 mm • Width: 200 mm 800 mm • Thickness: 16 mm 30 mm Kodpec Tu Rvofx Ah Njll • The workpiece width must not be greater than the workpiece length! Working height: 970 mm

Condition: ready for operation (used), Year of construction: 2002, Available immediately ex location: Kaltenbach saw – drilling line Type KBS 750 DG plus APS 1050 Year of manufacture: 2002 3-axis drilling station equipped with NENOK coolant channel drills Infeed roller conveyor: 16 m Kledpfjyaygiex Ah Nol Outfeed roller conveyor: 12.5 m Central control system renewed 2 years ago Price: EUR 58,000 plus VAT, ex works