Used Partition With Door for sale (11,046)

Condition: used, Used industrial doors / sectional doors from LS Loading Systems for warehouses, logistics centers, or loading docks. Doors with a window section and simple mechanical locking system without a lock. Several identical doors are available. Manufacturer: LS Loading Systems Door type: Industrial door / sectional door Design: For indoor and outdoor installation Locking system: Simple mechanical locking system without a lock Operation: Manual Lhedpfx Aioy Tym Doieh Clear width: 253 cm Clear height: 274 cm Quantity: 27 units available

Condition: used, Used industrial doors / sectional doors from Crawford for warehouses, shipping areas or loading docks. Doors with window sections and simple mechanical locking without a lock. Several identical doors available. Manufacturer: Crawford Door type: Industrial door / Sectional door Design: Loading dock door Locking mechanism: Simple mechanical locking without a lock Lhodpfoy Tyiljx Aiioh Operation: Manual Clear width: 252 cm Clear height: 241 cm Quantity: 40 units available

Condition: good (used), CMC Italia Q Finish Crater 20 Book Press Book press with groove cutter and heated platens. Manufactured by CMC, Italy. Technical specifications: Maximum format: 420 x 500 x 80 mm Weight: 420 kg Pressure: 5000 kg Lsdoy Tu Txopfx Aiishh Built-in hydraulic unit. Automatic book feed. Automatic format detection. 380V power supply + compressed air.

Condition: ready for operation (used), * Brand: Kleemann * Type: dosing belt conveyor with hopper * A-A length: 5000 mm, Beltwidth: 800 mm.(used) Lhedjy Tm Ibspfx Aiioh * Driving: gearbox approx 4 kW. * Dim. Hopper: 4000 X 1800 X 1150 mm.(new)

Condition: used, Year of construction: 2009, operating hours: 9,203 h, 2009 | MAN TGS 26.320 6x2-2 BL with Oil Steel Eagle 3526 (35m) | Used Truck-Mounted Boom Lift | 9203 hours | 115506 kms 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 67500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 62 inspection points 62 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: When the truck is stationary for a long period, it sinks and has to be manually lifted to get it out of its alarm state; swapping the relays also works. The truck has not been tested on the road, there were electrical problems with the boom lift which were resolved during inspection. The machine is very sensitive to malfunctions, and a 24V emergency pump has been additionally installed. The truck has low mileage, otherwise, it is a functioning machine. It has recently been serviced by Oil Steel. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "38953 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options Lhedpfx Aoydf Hpsiijh 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 1990, Technical details: x-travel: 800 mm y-travel: 410 mm z-travel: 510 mm control: Fanuc 10 MA rapid travel x/y/z: 20/20/15 mm/min table surface area: 1100 x 450 mm tool taper: BT 40 tool magazin:: 30 BT 40 max. tool length: 250 mm max. tool weight: 8 kg power requirement: 7,5/5,5 kW Lodpfsy S T T Uex Aiishh turning speed range: 6000 1/min weight of the machine ca.: 6,3 t Under offer is a complete CNC tool shop, whioch will be given up due to old age of owner. The Mori Seiki is still highly accurate. All existing tool holders, tools, drills, etc. come with the machine. All measuring devices also come with the machine. Upon request orders for parts to be made can be passed on to new owner. This is a low cost all inclusive opportunity for a "Startup" *

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, LINE FEATURES 4-head welding machine FUSION 4H Frame unloading unit First milling module Q-MATIC 1 Serial connection between welding machine and cleaning machine Rotating table Electronic cleaning machine TRIMMER 4A Lsdpfsy S E E Njx Aiishh Extraction table Second milling module Q-MATIC 2 Line supervisor laptop Refilling unit Automatic frame unloading

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, controller manufacturer: AGIE, number of axes: 3, This 3-axis AGIE Hyperspark 2 Exact with Erowa was manufactured in 2005. It features an X-axis travel of 350 mm, Y-axis travel of 250 mm, and Z-axis travel of 250 mm. The machine is equipped with AGIE VISION 4 Software and includes an EROWA ROBOT MULTI with 60 ITS 148 places and 240 ITS 50 magazine places. If you are looking to get high-quality die-sinking EDM capabilities, consider the AGIE Hyperspark 2 Exact machine we have for sale. Contact us for further details. Ledpfsy S A Dcsx Aiiehh • EROWA ROBOT MULTI with 60 ITS 148 Places and 240 ITS 50 Magazine Places

Condition: like new (used), Year of construction: 2020, load capacity: 1,000 kg, lifting height: 1,880 mm, construction height: 1,560 mm, operating hours: 3,102 h, fuel type: electric, mast type: duplex, Manufacturer & model: TOYOTA OSE 100 Mast: 2W1880 ID: 25110.8747 Category: Used Mast type: 2W Lowered height: 1560 mm Lifting height: 1880 mm Capacity: 1000 kg Platform height: 1200 mm Picking height: 2800 mm Initial lift: Yes Lsdezaf H Iepfx Aiijhh Cabin width: 800 mm Year: 2020 Operating hours: 3102 hours Battery capacity: 24V / 620Ah Options: with SAFETY gates !!

Condition: good (used), Year of construction: 2018, operating hours: 3,869 h, load capacity: 1,400 kg, lifting height: 2,350 mm, fuel type: electric, mast type: duplex, construction height: 2,000 mm, Options: VERY unique WIDE TRACK version equipped with PALLET exchanger!! = Spreader / Rotator / Clamp (Range from 560 to 1700 mm) – Proportional lift & lower valves – Width between support legs 1280 MM!! Lhsdpfx Aiozafz Eeijh

Condition: like new (used), Year of construction: 2020, load capacity: 800 kg, lifting height: 1,880 mm, construction height: 1,380 mm, operating hours: 661 h, fuel type: electric, mast type: duplex, Manufacturer + model: LINDE V Mast: 2W1880 ID: 24091.5051 Category: Demo Mast: 2W Lowered height: 1380 mm Lifting height: 1880 mm Capacity: 800 kg Platform height: 1200 mm Lodpfx Aijzafzxoijhh Order picking height: 2800 mm Init.: Yes Year: 2020 Operating hours: 661 h Battery capacity: 24 V / 500 Ah Options: SAFETY gates! Complete, LIKE NEW!

Condition: good (used), Year of construction: 2020, 2 units available! Ledpfxjzab Smo Aiishh Rear-mounted shelving system with 4 shelves, 650x300 mm, and 4 support arms for long parts. Perforated back panel. Workplace lighting. Height adjustment system via handwheel (fine adjustment in 5 mm increments per revolution). Pneumatic clamping device for clamping individual profiles for hardware assembly, 180° swiveling, with locking in 30° increments, locking pneumatically actuated. Clamping position adjustable in the longitudinal direction of the profile. Clamping range for profiles with a construction depth of 45-120 mm and a working width of 50-150 mm, each adjustable in 7 mm increments. 4 pneumatic connections, 5 electrical connections, 2 holders for hand drills or screwdrivers, etc., mounted on a sliding tool drawer. Drawer extends across half the table width on the right.

Condition: good (used), Year of construction: 2019, functionality: fully functional, cooling capacity: 95 kW (129.16 HP), type of input current: three-phase, type of cooling: water, overall weight: 729 kg, input voltage: 400 V, total width: 920 mm, total length: 2,430 mm, total height: 1,060 mm, warranty duration: 6 months, heating capacity: 130 kW (176.75 HP), WATERCOOLED CHILLER/HEAT PUMP DAIKIN EWHQ120G 95/130 kW Cooling capacity: 95 kW - 27 ton (12/7°C — 35°C) Lhodpfx Aiey U U Tueijh Heating capacity: 130 kW - 36.9 ton (40/45°C - 7°C) Year of manufacture: 2019 Refrigerant circuit: 1 pcs. Heat exchanger: Plate Options: Heat pump Type of refrigerant: R410A Compressors: 2 pcs. Copeland(scroll) Dimensions: 2,432 х 0,928 х 1,066 m. Weight: 729 kg. Working hours: 11437 / 4712 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: good (used), Year of construction: 2009, functionality: fully functional, cooling capacity: 873 kW (1,186.95 HP), type of input current: three-phase, type of cooling: air, overall weight: 9,880 kg, input voltage: 400 V, total width: 2,260 mm, total length: 9,400 mm, total height: 2,430 mm, warranty duration: 6 months, Aircooled chiller Climaveneta FOCS-CA/SL 873 kW Cooling capacity: 873 kW (12/7 — 35°C) Year of manufacture: 2009 Heat exchanger: Shell and tube Refrigerant circuit: 2 pcs. Type of refrigerant: R134a Compressors: 2 pcs. Bitzer (screw) Number of fans: 12 pcs. Dimensions: 9.40 x 2.26 x 2.43 m Weight: 9 880 kg. Working hours: 30717/30184 h. Condition: Used, tested, fully operational Lhsdpfjy U U Hhjx Aiioh CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: good (used), Year of construction: 2014, functionality: fully functional, cooling capacity: 32.3 kW (43.92 HP), type of input current: three-phase, type of cooling: air, overall weight: 394 kg, input voltage: 400 V, total width: 1,250 mm, total length: 1,060 mm, total height: 1,800 mm, warranty duration: 6 months, AIRCOOLED CHILLER TRANE 32,3 KW Cooling capacity: 32,3 / 9,2 tons kW (12/7 — 35°C) Year of manufacture: 2014 Refrigerant circuit: 1 pcs. Type of refrigerant: R-407C Compressors: 1 pcs. Danfoss (scroll) Heat exchanger: Plate Hydraulic module: water pump, buffer tank, expansion vessel Number of fans: 1 pcs. Dimensions: 1.06 x 1.25 x 1.80 m Weight: 394 kg Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request. Lodpfxey U Uyzo Aiijhh

Condition: good (used), Year of construction: 2015, functionality: fully functional, cooling capacity: 486 kW (660.78 HP), type of input current: three-phase, type of cooling: air, overall weight: 8,234 kg, input voltage: 400 V, total width: 2,500 mm, total length: 12,000 mm, total height: 2,300 mm, warranty duration: 6 months, Aircooled chiller SWEGON COBALT PRO SLN 58.2 FC 486 KW Cooling capacity: 486 kW / 138.19 tons (12/7 — 35°C) Year of manufacture: 2015 Options: Freecooling (370 kW) Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube Condenser: Microchannel, Aluminum + Copper / Aluminum (Freecooling) Compressors: 1 pcs. Bitzer CSH9563-160Y-40D (screw) + 1 pcs. Bitzer CSH8593-140Y-40D (screw) Type of refrigerant: R1234ze Number of fans: 20 pcs. (EC-fans) Dimensions: 12x2.5x2.3 m. Weight: 8234 kg. Working hours: 13200/18920 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Lhedpfsy U Uvpox Aiioh Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: ready for operation (used), Year of construction: 1983, Offset printing machine ULTRAMAN VII AGS/1983 Maximum sheet size 1120x1600 mm Minimum sheet size 600x800 mm Lhsdsy U Ufdjpfx Aiioh Printing on 5 color groups + 1 dispersion varnish group IR drying alcohol dampening and cooling Quick action plate clamps The machine is in good working condition.

Condition: new, Year of construction: 2023, functionality: fully functional, cooling capacity: 60.1 kW (81.71 HP), type of input current: three-phase, type of cooling: air, overall weight: 750 kg, input voltage: 400 V, total width: 2,100 mm, total length: 1,100 mm, total height: 2,400 mm, warranty duration: 6 months, heating capacity: 69.9 kW (95.04 HP), Aircooled chiller/Heat pump CLIMAVENETA MEHP IS G07 0071 60.1 kW/69.9 kW Cooling capacity: 60.1 kW / 17.09 tons (12/7 — 35°C) Heating capacity: 69.9 kW / 19.88 tons (40/45 —7°C) Year of manufacture: 2023 Options: Heat pump. Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Mitsubishi BVK128FBАMT (scroll, inverter) Type of refrigerant: R32 Number of fans: 2 pcs. (Frequency inverter) Dimensions: 1.1x2.1x2.4 m Weight: 750 kg Working hours: 0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request. Lsdpfxsyx Dd De Aiijhh

Condition: good (used), axle configuration: 2 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, first registration: 07/2008, loading space length: 9,800 mm, loading space width: 2,400 mm, loading space height: 2,650 mm, total length: 12,250 mm, total width: 2,600 mm, total height: 4,000 mm, suspension: air, tire size: 265/70R19,5, wheelbase: 6,980 mm, color: white, Year of construction: 2008, Equipment: ABS, tail-lift, = Additional Options and Accessories = - Electronic Braking System (EBS) - Air suspension = Further Information = Axle Configuration Tyre size: 265/70R19.5 Brakes: Disc brakes Suspension: Air suspension Front axle: Twin tyres; Max. axle load: 10,000 kg; Steered; Tyre tread left inside: 50%; Tyre tread left outside: 50%; Tyre tread right inside: 50%; Tyre tread right outside: 50% Rear axle: Twin tyres; Max. axle load: 10,000 kg; Tyre tread left inside: 50%; Tyre tread left outside: 50%; Tyre tread right inside: 50%; Tyre tread right outside: 50% Weights Unladen weight: 8,140 kg Pay load: 11,860 kg Gross vehicle weight (GVW): 20,000 kg Functional Tail lift: ZEPRO, 1,500 kg Refrigeration: from -29 °C to +25 °C Refrigeration unit: Diesel and electric (6,500 operating hours diesel; 490 electric) Wall thickness: 8 mm Lhodpfx Aoy Shfrjiijh Condition Technical condition: good Optical condition: average

Year of construction: 2026, condition: refurbished (used), LINEAR CAGE FORMING TUBE MILL VAI 89.5(6) with universal CTA forming Specifications: - Manufacturer: VAI Voest Alpine Industrieanlagenbau - Round tube diameter: 33.7 - 88,9 mm - Square tube: 30x30 - 70x70 mm - Rectangular tube: 40x20 - 100x40 mm - Thickness: 0.8 – 5.0 mm (6.0mm with S235J2) - Speed: 100 m/min Complete line with: Lhjdpfx Ajy Uhxksiijh - Double expandable mandrel with PEELER OTO AD408 SD - Strip entry line with strip opener, driven pinch-roll, pre-leveller and lateral guiding rolls - Automatic strip joiner - Intermediate strip guding stand - Break down section - Forming section : Universal CTA Forming section VAI CTA90 - Fin pass section - Welding section - Double Cooling tunnel - Sizing section - Off-Line sizing stands - Turk-head section - Motorised Exit roller conveyor Scope of supply: 1. Double expandable mandrel with PEELER OTO AD408 SD - Strip width 500mm - Hydraulic expansion - Snubber roll top/bottom - 8 Tn/arm - Pneumatic servocontrolled brake 2. Strip peeler - Strip opener 3. Strip Guiding 4. Break down section - 2 motorised stands - Monoblock casted stands - Hydraulic gauge compensation and quick setup - Shaft diameter 89mm - Mechanical SIKO indicator - Total installed power 106 kW 5. Forming section - Universal CTA Forming section VAI CTA90 6. Fin pass section - 2 motorised FP with rafted quick change - Monoblock casted stands - Hydraulic gauge compensation and quick setup - Shaft diameter 89mm - Mechanical SIKO indicator - Total installed power 106 kW 7. Welding section - 4-roll configuration - Heavy duty welding head with lateral and top adjustment 8. Double Cooling tunnel - 2 x 4000mm With V-rollers support 9. Sizing section - 4 motorised sizing cages - Total installed power 260kW - With quick-change rafted stands - SIKO bottom and top indicators 10. Off-Line sizing stands - 4 motorised sizing cages - Total installed power 260kW - With quick-change rafted stands - SIKO bottom and top indicators 11. Turk-head section - 3 turk-heads - Heavy duty changing plates 12. Complete set of rolls Round tube diameter: 33.7 - 88,9 mm Square tube diameter: 30x30 - 70x70 mm Rectangular tube diameter: 40x20 - 100x40 mm Thickness: 0.8 – 5.0 mm (6.0mm with S235J2) Speed: 100 m/min

Condition: good (used), mileage: 35,076 km, color: black, lifting height: 37,000 mm, Year of construction: 2016, operating hours: 3,725 h, Drivetrain Drive: Wheel Lhodpsy Sguxefx Aiioh Make of engine: MAN Weights Empty weight: 7.490 kg Functional Lifting capacity: 4.000 kg CE mark: yes Maintenance, history and condition Number of owners: 2 Technical condition: good Visual appearance: good Other information Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Maximum lifting capacity at end of jib: 250 kg Emission level: Stage VI / Tier VI Delivery terms: EXW Latest inspection: 2025-04-14 Production country: DE Additional information Please contact Michael Overmeer for more information = Additional options and accessories = - Hook blocks = Remarks = Böcker AK 37/4000 montiert auf einen MAN TGL 7.180 with passenger basket, construction year 2016 with only 35.076 km and 3.725 hours. This vehicle is in nice condition (has been well maintained over the years) and has among other things: a passenger basket, automatic leveling, hydraulically folding support legs, hydraulic jip. Changes and typographical errors reserved.

Condition: used, mileage: 12,460 km, color: white, lifting height: 35,000 mm, Year of construction: 2009, operating hours: 2,616 h, Drivetrain Drive: Wheel Make of engine: MAN Functional Lifting capacity: 3.000 kg CE mark: yes History Number of owners: 2 Other information Front tyres / undercarriage remaining: 80 Rear tyres remaining : 80 Delivery terms: EXW Upper hours: 2616 h Latest inspection: 2026-03-03 Production country: DE Additional information Please contact Michael Overmeer for more information = Additional options and accessories = - Hook blocks Ljdpfoy Sgr Dex Aiiohh = Remarks = Böcker AK 35/3000 montiert auf einen MAN TGL 7.180 construction year 2009 with only 12.460 km and 2.616 hours. This vehicle is in very nice condition (when not in use, the machine has always been stored indoors) and has been well maintained over the years, last big maintenance at Böcker 12-2025, last big maintenance at MAN 03-2026, invoices available) and has among other things: hydraulically folding support legs, hydraulic jip. Changes and typographical errors reserved.

Year of construction: 2010, condition: excellent (used), Schaltschrank mit Glastür und Kühlgerär auf Rollen Lsdpfoiluykjx Aiijhh 600 x 800 x 2.000 mm

Condition: good (used), Hang 102-20 Eyeleting machine with base This device is like new, the latest product from Hang. Made in Germany. Technical specifications: Lhodpfjy Sfa Tox Aiioh 1 head Eyelet diameter: No. 24-25. Inner diameter: 4mm. Maximum capacity: 20 sheets of 80gsm Front and side margins Manual operation The device feeds the Eyelet in the correct direction, punches holes, and crimps the Eyelet in a single pass. Instructions are included.

Condition: good (used), Fetra Table top Cart 127x80cm with 3 shelves Perfect condition, like new. Lhjdpfxsy Sd Tfo Aiijh Modular design. Powder-coated blue. Non-marking thermoplastic rubber tread, wheels with precision ball bearings. 2 swivel wheels with brakes and 2 fixed wheels. Load capacity: 500 kg