Used Panhans 240 for sale (87)

Condition: excellent (used), Year of construction: 1994, - Cutting length: 3200mm - Diameter: 76mm - Main motor: 7.5kW - Scoring unit: 1.5kW Kedpfxjwq Sl Te Affjnf

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 402, cutting length (max.): 3,200 mm, cutting height with scoring (max.): 70 mm, saw blade diameter: 300 mm, cutting height (max.): 70 mm, cutting width (max.): 3,200 mm, Equipment: scorer, Cutting length: 3200 mm Cutting width: 3200 mm Width stop: Gear motor adjustment Main saw unit: saw blade Ø 300, Ø 30, Z=60, SH 70 Scoring unit: yes - saw blade Ø 125, Ø 20, Z=24 Softforming unit: no Side pressure unit: yes - Version: FR 50/100 Residual cutting device: yes - Pressure beam recess Veneer cutting device: yes Trimming device: yes - Spacing: 145/525/1790 Support table front: 400 x 1400 mm - 2 pieces Rear support table: 240 x 2960 mm - 1 piece Support bars rear: 40 x 2960 mm - 5 pieces Angled table: 480 x 1400 mm left Angle ruler: with pull-out Collets: 4 pieces - floating - distance 70/400/1600/2800 Stop jaw: 2 pieces - rigid - distance 1000/2200 additional foot at the rear : no - 3 feet safety guard: yes Kjdevi H Diepfx Affenf foot switch : no Machine cuts from: left to right unit can emerge in any area: no automatic lowering with saw overtravel: no 3-step cutting height adjustment: no Main circular saw: 7.5 kW, 380 V, 2870 rpm, 50 Hz Scoring saw: 1.1 kW, 380 V, 2800 rpm, 50 Hz Width stop adjustment motor with torque compensation: fine input motor: 0.12 kW, 380 V, 1380 /min, main motor: 0.35 kW, 380 V, 1350n.

Condition: excellent (used), Year of construction: 1976, functionality: fully functional, machine/vehicle number: 163, planing width: 420 mm, total length: 2,500 mm, total height: 1,200 mm, total width: 1,400 mm, table length: 2,500 mm, surfacing fence length: 180 mm, surfacing fence height: 1,110 mm, chip removal for surfacing (max.): 12 mm, number of planer blades: 2, number of blades: 4, type of input current: three-phase, The machine was externally inspected in 2007 prior to acquisition and no defects were found. Since then, it has been used in a bow workshop (archery) with very low usage compared to industrial application. Replacement knife included. The chip removal display is not functional. Otherwise, there are no further known defects. Kjdowyk Rgjpfx Affenf A forklift is available on site to assist with loading. Dismantling, loading, and transport must be organized and paid for by the buyer. The machine will remain in operation until 18.07. and will be located in Plankstadt near Heidelberg until then. Afterwards, it will be located in 31863 Bisperode (Hameln-Pyrmont). If purchase is completed before 17.07., collection from Plankstadt is possible until 15.08. if required.

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, For sale: A precise sliding table saw from Panhans Manufacturer: Panhans Model: 690 Serial number: 519 Year of manufacture: 1989 Weight: approx. 1100 kg Operating hours: — Space requirement: approx. 7000 × 3500 mm Kedewttq Ajpfx Affjnf Motor power: 7.5 kW Voltage: 380 V / 50 Hz Operating current: 12.9 A Sliding table length: 2600 mm Table height: 900 mm (± 20 mm) Saw blade diameter: max. 450 mm Speeds: 3000 / 4000 / 5000 / 6000 rpm Cutting height: max. 155 mm at 90°, 105 mm at 46° Saw blade tilt: 0°–46° Height and tilt adjustment: Mechanical Scoring unit: No Extraction capacity: approx. 1450 m³/h at 20 m/s

Condition: new, Year of construction: 2024, Technical data - Plane width: 510 mm - Feed table length 1620 mm - Output table length 1170 mm - Total table length 2850 mm - Engine power 5,5 kW /7,5 PS - knife shaft speed 5000 rpm Kjdpfefg Uzbsx Affjnf - Suction connection 160 mm - Voltage 400 V / 50 Hz - Space requirement 2850 x 1420 mm - Colour light grey / purple blue - Weight: approx. 1050 kg Description - Solid German mechanical engineering - for dressing and jointing including hollow and pointed joint adjustment for planer width up to 510 mm and max. chip removal up to 8 mm - ergonomic working position directly on the cutter head - Solid steel spiral knife shaft - Cleaning set for spiral knife shaft - finely planed cast iron tables, total table length 2850 mm - Control panel on top at eye level with digital display of chip removal, the current delivery table situation (neutral, hollow and pointed joint), including - Document holder and practical tool tray - electromotive adjustment of the feed table via push buttons - Hollow and pointed joint adjustment at the delivery table - serrated table lips for noise reduction - Dressing fence Adjustment of depth and inclination via 1 lever operation, inclination adjustable up to 45°, mounted in extremely smooth-running steel guide - Anodized dressing fence ruler - Pivoting auxiliary stop Type 1545 - Console for feeding apparatus - Bridge protection TXF type 1570 with hinged cover - automatic engine brake - automatic star-delta start, motor protection switch - planed in the factory

Condition: good (used), Year of construction: 2007, Surface planer Kodpfx Aowkf Hkoffjnf Model Panhans PA 51 Year of manufacture 2007 Planing width 510 mm Cutter block with 4 strip knives Feed table length 1180 mm Discharge table length 1180 mm Motor 4.0 kW / 400 V

Condition: used, Year of construction: 1986, From a model shop Used, excellent condition, little used Make: Panhans Kjdpfewhqw Nox Affonf Type 325 Year of manufacture: 1986 GS-tested Motor: 4.0 kW Top control panel Planing width: approx. 510 mm Infeed table length: approx. 1600 mm Removal table length: approx. 1150 mm Auxiliary stop Slotted/low-noise table lips Number of knives: 4 Blade system: Strip planer knives Chip thickness indicator Hollow-pointed joint Automatic brake Hollow-pointed joint adjustment Extraction connection: 140 mm diameter Space required: approx. 2800 mm x 800 mm x 1200 mm Weight: approx. 800 kg Storage location: 97447 Gerolzhofen, free on load, unpacked Sold in the current condition, as seen, without warranty or guarantee

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 6028, cutting width (max.): 1,200 mm, saw blade diameter: 4,000 mm, table length: 3,200 mm, height adjustment type: hydraulic, trimming length: 2,000 mm, rotational speed (min.): 3,000 rpm, rotational speed (max.): 6,000 rpm, input voltage: 400 V, length stop: 3,200 mm, Machine no: 6028 Types: 690 B Kjdpfevl Icrex Affonf 3000,4000,5000,6000 rpm Power: 3/400V/50Hz Motor: 5.5 Kw Table 2000X400 mm

Year of construction: 1978, condition: used, machine/vehicle number: 1010, Roll diameter 1.000 mm band saw blade length 7.100 mm, max. cutting width 960 mm, max. cutting height 620 mm, motor 5,5 kW, table size 1.450 x 1.030 mm, installation dimensions L x W x H: Knjdpfx Afjhzgnzsfjf 1,900 x 1,160 x 3,130 mm Sale in "as is" condition, ex location Seevetal, without freight and packing, subject to prior sale

Condition: like new (used), Year of construction: 2024, *demonstration machine available at short notice TECHNICAL DATA planing width 630 mm planing height 3 - 300 mm chip removal max. 8 mm thicknessing table length 1100 mm blade shaft speed 5000 rpm motor power feed 0,55 kW / 0,8 PS / 0,75 kW / 1,0 PS suction nozzle Ø 160 mm left, right usable feed speed 7 + 14 m/min Color RAL 7035 light gray and RAL 5000 violet blue Knedefgwqajpfx Affef Net weight approx. 1050 kg TECHNICAL DESCRIPTION Solid German engineering For thickness planing for planing width up to 630 mm and planing height from 3 to 300 mm, compact and ergonomic machine dimensions Planed in the factory PANHANS solid steel cutterhead Ø 125 mm with 4 Tersa reversible knives Pendulum mounted feed rollers Segmented rubber infeed and outfeed rollers Ø 90 mm ensure smooth and safe workpiece infeed With link pressure beam Electrical height adjustment of the thicknessing table, tilt-proof on 4 trapezoidal thread spindles With finely planed thicknessing table Positioning control 4,3" touch screen Two feed speeds: 7 + 14 m/min Automatic star-delta start-up Mechanical motor brake Suction nozzle Ø 160 mm, can be used on the left or right side CE conform GS tested

Condition: used, Year of construction: 1993, with Centro-Fix reversible blade Kedpfjv Hht Tox Affenf Machine cleaned, lubricated, partially repainted made operational, functionally tested fully adjusted Test run Various parts replaced: 4x Tersa blades Rubber guard Used Make: Panhans Type 426 Year of manufacture: 1993 Machine no. 1399 GS wood dust tested Motor 7.5 kW Planing width approx. 630 mm Planing height approx. 250 mm Table guide rollers: 2 adjustable Articulated pressure beam Steel feed roller Rubber feed roller 2 feeds Number of knives: 4 Centro-Fix reversible knives Digital display for planing height Electric height adjustment with handwheel fine adjustment Sound insulation Extraction connection D 160 mm Space requirement approx. 1300 mm x 1100 mm x 1100 mm Total connected load approx. 8.5 kW Storage location: 97447 Gerolzhofen, free on load, unpacked Handed over in the current condition as seen, without guarantee or warranty

Condition: used, Year of construction: 1989, with positioning control and Tersa cutterblockcleaned, function tested, test run- machine lubricated- test run- infeed rollers renewed- outfeed rollers renewed- rubber lip front and rear renewed- test planingspare parts:Panhans feed rollers, overhauled controlused, good conditionmake Panhanstype 435year of construction 1989Masch.-Nr. 170GS-testedmotor 5,5 kW / 0,25 kWplaning width approx. 510 mmplaning height approx. 250 mmlink pressure beamrubber infeed rollerrubber outfeed rollerfeed 7/14 m/ber of knives 4 piecesknife systemTersa reversible kniveselectric height adjustmentautomatic positioning controlsound insulationexhaust connection D 160 mmspace requirement approx. 1100 mm x 1200 mm x 1200 mmweight approx. 950 kgtotal connected load approx. 5,75 kWstorage location 97447 Gerolzhofen, free on truck, unpackeddelivery in as-is condition as viewed,without warranty and guarantee Ksdpsvwfbiefx Affsnf