Used Pan Shovel for sale (4,003)

Condition: used, Swivel bending machine KRAMER, type A-Maut. II 1000 Manufacturer’s serial number: 48 287, year of manufacture: 1990 Useful length: 1060 mm Maximum sheet thickness: 3.75 mm Stroke of the upper die: 180 mm Adjustability of the bending die: 60 mm Rear stop: 480 mm Drive power of the bending die drive: 4 kW Drive power of the upper die drive: 1.5 kW Mains connection: 400 volts, 50 Hz - Manual and semi-automatic control - Angle setting via angle pre-selection dial - One-piece pointed beam, 135° - Rear stop with hand crank adjustment and simple measuring scale - Continuous stop rail - Electric foot switch, 3-way Fpjdpfx Akjfnabyjysn Space requirement: L x W x H: 2200 x 1350 x 1500 mm Weight: approx. 2.3 tons Good condition

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, total height: 1,900 mm, total width: 2,400 mm, total length: 6,000 mm, type of input current: AC, overall weight: 500 kg, input voltage: 220 V, machine base height: 900 mm, operating pressure: 9 bar, year of last overhaul: 2027, control voltage: 220 V, input current: 16 A, input frequency: 50 Hz, inner diameter: 610 mm, space requirement length: 6,000 mm, space requirement height: 2,000 mm, space requirement width: 3,000 mm, We offer this ready for use The Raw Juice Company TOP-21 Bottle Filling Machine 100ml - 3000ml, year of construction 2022. Manufacturer: The Raw Juice Company Model: TOP-21 Year of construction: 2022 year Condition: ready for use / Currently in use Category ID: 310 Type ID: 1066 Machine type: Bottle Filling Machine 60ml - 3000ml Fjdoz D Uuxopfx Akyopn This versatile filling machine is currently being used for filling bottle sizes from 60ml - 2000ml. It is a fully automatic line, run by 1 person. Put the bottles on the line, it will fill them (4 bottles at a time) with a 4 headed diving nozzle (to avoid foaming), then moving the bottles along to a cap placer and finally a to a cap tightener. The cap tightener is set up for a 38mm cap (this can be changed). This line has been regularly maintained by our in house service team and is in perfect working order. Capable of filling from 500 - 2000 bottles P/Hour If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: new, Year of construction: 2025, New forklift bucket – immediately available! Quick and easy mounting on forklift forks! Double-acting hydraulic cylinder, including hoses and couplings! 2 pivot points allow the bucket to tilt fully back! NP1.600 is 160 cm wide and has a capacity of approx. 1,200 L (unladen weight 365 kg) NP2.000 is 200 cm wide and has a capacity of approx. 1,500 L (unladen weight 400 kg) Affordable delivery possible! Sale price: NP 1.600 per unit: €2,450 net NP 2.000 per unit: €2,650 net Fpjdpfx Akewz Uwtsyen

Condition: used, Year of construction: 1991, Working width: 510 mm Planer cylinder: Strip cutter Number of cutters: 4 Jointer table length: 2200 mm Adjustable jointer fence angle: yes Folding up the jointer table: manual Maximum feed thickness for thicknesser: 240 mm Height adjustment of thicknesser table: electric Indication of planing thickness: scale Feed rate: 7 / 14 m/min Infeed roller: steel, ribbed Fpsdpfx Ajz I Iugokyon Outfeed roller: rubber Table rollers: yes Motor power: 5.5 kW Motor brake: yes, automatic Dust extraction port: 160 mm Machine length: 2200 mm Machine width: 1050 mm Weight: 1050

Condition: new, 3 tubs incl. 1 access ramp Dimensions L x D x H = 1870 x 1370 x 78 mm Wheel load (kg) 2000 kg Collection volume (l) 110 Material steel Load capacity 5000 kg/m² Galvanized surface Galvanized grating Approved for the storage of flammable liquids (H224-226) and substances of all water hazard classes Fodporypb Iefx Akyspn fulfill all requirements of the German Water Resources Act (WHG) Sump tray made of galvanized steel Leak test in accordance with EN ISO 3452-1 For safe storage and protection during filling and transfer work Particularly low construction height Removable hot-dip galvanized grating Easy to combine for the protection of larger areas With access ramp as good as new, will be cleaned before delivery

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 1009456, total height: 1,350 mm, total width: 600 mm, total length: 700 mm, overall weight: 30 kg, type of input current: AC, input voltage: 230 V, input current: 6 A, Equipment: documentation/manual, Audion PANDYNO Bag Filling and Sealing Machine Fodpfxsz Hyr Is Akyopn For sale is an Audion PANDYNO bag filling and foil sealing machine on a mobile stainless steel frame. This system is suitable for filling and sealing bags with powders, granules, and similar products. The machine is in good condition and is offered with documentation. It has only been used for food products.

Condition: excellent (used), I offer a Siemens SIMATIC Mobile Panel 177 PN, a mobile operator panel designed for professional applications in industrial automation. The device provides convenient operation and control of machines and production lines from a portable operator panel. Technical specifications: • Manufacturer: Siemens • Model: SIMATIC Mobile Panel 177 PN • Catalog number: 6AV6645-0BB01-0AX0 • Communication interface: PROFINET (PN) • Color TFT touchscreen • Programmable function keys F1–F14 • Built-in manipulator / control knob • Long connection cable with a multi-pin industrial connector • Made in Austria Fpjdozbufijpfx Akysn Condition: • Used item • Screen without cracks or mechanical damage • Normal signs of use and storage are visible • Housing in good technical condition • Sold as is, according to the condition shown in the pictures • Full testing is not possible – sold as untested Application: • CNC machining centers • Production lines • Industrial robots • Siemens SIMATIC automation systems • Assembly and production workstations Included: • Siemens SIMATIC Mobile Panel 177 PN • Original connection cable with an industrial connector

Condition: used, Year of construction: 2016, operating hours: 32,318 h, functionality: unexamined, power: 30 kW (40.79 HP), Used Spanner HKA 30, year of manufacture 2016. The unit was fully operational. It has already been dismantled and is ready for collection. Fpjdezbnklspfx Akyon 30 kW electric 73 kW thermal Operating hours: 32,318 Engine: GM 5.7L, non-turbo Includes complete control cabinet and numerous accessories.

Condition: used, Year of construction: 1999, Used Machine Year of manufacture: 1999 Features and Technical Specifications: - Usable cutting length: 4200 mm - Usable cutting width: 3200 mm - Saw blade overhang: 70 mm - Max. cutting height: 60 mm - Main spindle motor power: 7.5 kW - Main saw blade diameter: 280 mm - Scoring saw motor power: 1.1 kW Fedpfezy Dz Nox Akyspn - Scoring saw blade diameter: 125 mm - Saw carriage feed speed (forward): 0–40 m/min - Saw carriage return feed speed: 40 m/min - Saw blade change: with key - One continuous pressure beam - Control system: Euroline 1 - 99 programs - Panel cutting from the front - Final panel cut - Cutting with sensor - Air-cushion support tables: 4 - Exhaust ports: 140 mm at the bottom (required vacuum pressure: 800 Pa) - Exhaust ports on the pressure beam: 2 x 100 mm (required negative pressure: 830 Pa per exhaust port) - Air velocity: 20 m/s

Condition: new, Year of construction: 2026, The segment folding machine SM 2020x1.2mm is a machine for bending different elements from the metal sheets with maximum length 2020 mm and maximum thickness 1.2 mm. Can be equipped with third bar segmented. Usually folding machines are used for producing roofing elements, ventilation elements, drainage system elements etc. But segment folding machine SM thanks to special segmented bars gives the opportunity to bend boxes and façade cassettes in addition to standard bending elements. Segmented bar is a bar consisting of parts with different lengths. So you can adjust it to the length you want and bend boxes around this segmented part. We produce three models of segment folding machine SM: Segment folding machine SM-1270 x 2mm Segment folding machine SM-1550 x 1.8mm Segment folding machine SM -2020 x 1.2mm Those segment machines have two bars segmented: The upper bar and rotation bar. The upper bar has a 135 degrees’ angle, so it’s possible to bend elements with maximum bending angle 135 degrees Fpjdpfxov Tyr Is Akysn The standard set of segment folding machine SM includes: The folding machine SM, tempered segments, angle measuring device, the four position angle limiter, two segments with side cuts, multifunctional acceptance table. As an additional option you can get cross cutting knife for the segment sheet metal bending machine. The maximum thickness of metal the knife can cut is 0.8mm steel. The segments of the folding machine are tempered and the rigidity of them is about 30 HRC. So it lets the opportunity to bend thick metal in any part of bending machine without any damage. We have started producing of segment folding machine SM since 2003 y. So we have a great experience in segment machines producing and can propose you a perfect solution for you business. Specifications Material Material width (mm) 2020 The material thickness (mm) 1.2

Condition: used, Year of construction: 2000, Planing width: 410 mm Infeed table: 1620 mm Outfeed table: 1170 mm Overall length: 2850 mm Strip planing cutterhead, Z = 4 Electrically adjustable jointer table with digital display Adjustable fence with auxiliary fence Motor: 4 kW Speed: 5000 rpm Space requirement: 2950 x 1260 mm Weight: approx. 850 kg Fodpfezb N Tzsx Akyepn Location: Nattheim

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, power: 6 kW (8.16 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, number of chambers: 2, fuel type: gas, year of last overhaul: 2026, Equipment: CE marking, We offer this Termopan TPD-123 baking oven in very good condition, manufactured in 2014. Manufacturing number: 078/14 Model: TPD-123 Control panel contract number: 66203-7 Voltage: 400 V Frequency: 50 Hz Power: 6 kW Phases: 3 Fpsdpfx Akszmykgsyjn Fuel: Gas The oven is a double-chamber oven with two baking chambers and a single Weishaupt burner. The two chambers can be used simultaneously or independently, depending on the requirements, making it suitable for high-capacity production of bakery and pastry products. The offer also includes 3 tray trolleys. The trolley is designed for 60x80 or 60x40 cm trays, with two trays per row. If you have any further questions or require more information, please do not hesitate to send us a message or call us.

Condition: excellent (used), Year of construction: 1997, Rip and cross saw REMA DMLK 30 Producer of REMA Machine model / type DMLK 30 Year of production 1997 Fodpfx Akefv Hphjyjpn Machine category Longitudinal and transverse saw Location Gorzów Wlkp. Conditions of delivery PERSONAL COLLECTION Cost of delivery Customer cover Startup type to be agreed Description Comments - after the technical review - very good condition - year of production 1997 TECHNICAL PARAMETERS: main engine 3.9 kW trolley length 1370 mm blade diameter 300 mm angle adjustment 0 - 45 " height adjustment cutting height max. 90 mm cutting width on the right side 885 mm ruler length 1350 mm ratchet extended receiving table two kinds of blade rotation speed 3700 and 5000 RPM The protractor visible in the photos is an additional option for PLN 400 net dimensions: length / width / height 135 x 85 x 135 cm weight ~ 320 kg

Condition: used, Year of construction: 1992, Table milling machine, Panhans Type 250, from a training workshop. - Dovetail and slot table - Aigner integral fence - Elu feed system - Power: 5.5 kW - Speeds: 3000/4500/6000/9000 rpm Fsdpjztwr Iefx Akyopn - Clockwise/counterclockwise operation - Spindle: 30 mm #8503 Net price

Condition: defective spare-parts repository (used), functionality: unexamined, Due to warehouse clearance and clean-up, various machines are offered here as untested, defective, for refurbishment, or for parts. The machines are offered in their current condition at favorable prices. Please refrain from making unreasonable price offers. Fpjdpfxoz Efvpj Akyon Briquetting press SPÄNEX COMAFER, defective Briquetting press Type: SH50 Capacity up to 50 kg/h (material-dependent) Density 0.8 - 0.9 kg/dm³ (material-dependent) Briquet diameter approx. 50 mm Dimensions approx. 230cm x 140cm x 125 cm Feed hopper: diameter 120cm, height 93 cm Volume 1m³ Weight approx. 500 kg Can be installed under a dust extraction system The machine has been in my warehouse for some time. The machine is explicitly sold as defective, for spare parts, or for rebuilding by hobbyists, for export, etc. The machine is usually complete, but a functional test cannot be carried out. There are 2 identical machines in stock. The machines can also be purchased as a package. Condition: see pictures. (See pictures – a prior inspection is strongly recommended; simply leave your phone number by email, and I will contact you to arrange an inspection appointment. Subject to prior sale. All information is without guarantee. The machines can be picked up by the buyer or shipped via a freight forwarder at the buyer's expense. Loading or packaging can be organized by us. The shipping costs are an estimate; they may vary depending on the distance and unloading options; please inquire. The stated selling price is the net price plus VAT. An invoice with VAT will be issued. Warranty basis: due to age and wear, the sale is exclusively to business customers without any warranty, guarantee, or right of return. All information is without guarantee. The buyer acknowledges this by submitting their bid. If the offered item is a used item, the warranty is 12 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as a business customer within the meaning of §14 BGB, any warranty is excluded. If the offered items are new, the warranty is 24 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as a business customer within the meaning of §14 BGB, the warranty is 12 months.

Condition: excellent (used), Year of construction: 2010, Panhans PF45 swivel spindle milling machine in good, fully functional condition. The machine has been used very rarely and has hardly any operating hours. Therefore, it is slightly dusty. Year of manufacture: 2010 Swivel range: -5° to +45° Spindle diameter: 30 mm Vertical adjustment: 170 mm Speeds: 3000 / 4000 / 6000 / 8000 / 10000 rpm Motor power: 5.5 kW Table size: 1,300 x 850 mm Weight: approx. 530 kg Right and left rotation of the milling spindle Optionally, a suitable dust extraction system from Höcker Polytechnik / Nestro can also be purchased (see last picture). The machine can, of course, be inspected and thoroughly tested while powered on. The sale is to commercial users with exclusion of liability for material defects. No guarantee, warranty or right of return. Fodpfjz Dp Ersx Akyjpn

Condition: new, Year of construction: 2025, Pan & box brakes SM3-1270x2 is used for bending metal sheets up to 1270mm length and 2mm thickness. The main difference of ours bending machine from other models is segmented three bars: upper bar and bending bar segmented, and also segmented bottom bar. So it lets to bend difficult shapes elements with reverse bends. This additional third segmented bar makes bending machine more functional and lets the user to expand range of elements he can make. Pan & box brakes has pedal mechanism to make work of one operator more convenient and freer his hands while metal fixing process. In standard set pan & box brakes SM3-1270x2 goes with three segmented bars. Height of upper segments is 30mm, lifting height of upper beam is 40mm. Also in standard set with machine goes four position angle limiter to make production of same angle elements more easier and side notch segments to bend boxes with inside bends. Fedpeqxandsfx Akyjpn As additional options you can get: upper segments 45mm heigh instead of 30mm; tempering of segments (30 points of hardness instead of 12 points) cross cutting knife multifunctional acceptance table to make production of same sizes elements much easier Maximum bending angle of machine is 135 degrees. Segmented bending machine SM3-1270x2 is equipped with 11 segments of different length: 400мм, 270мм, 200мм, 100мм,75мм, 50мм, 45мм, 40мм, 35мм, 30мм, 25мм so it lets to bend different sizes boxes and elements. So pan & box brakes SM3-1270x2 with three bars segmented is perfect solution for customers who makes different elements such as façade cassettes and boxes with reverse bends, companies whose field of work is ventilation elements production and air conditioning systems production, construction companies and others who work with metal sheets and produce different elements from it. To get more information about segmented bending machines we produce please contact our sales department.

Year of construction: 2010, condition: repair required (used), Mastersizer Hydro 2000S. Requires laser replacement, which we can perform. The price for laser replacement is 7,500 euros. The total price for the fully tested and functional unit is 13,500 euros. Technical specifications: Malvern Mastersizer 2000 particle analyzer for liquids, with Hydro 2000S module. The Hydro 2000S module can circulate from 50 ml to 150 ml of liquid. Variable pump/mixer speeds allow for the suspension and circulation of particles of different sizes and densities, while a variable power ultrasonic system enables the dispersion of particle agglomerates. The Mastersizer 2000 measures the particle size in the sample and displays their proportions on a computer in a graph. The measurement is taken when the particles pass between the detector array and the laser. Hydro 2000S technical specifications: Voltage: 220-240 V, 50-60 Hz Power: 240VA Maximum particle size: 600 µm Mastersizer 2000 technical specifications: Voltage: 240 V, 50-60 Hz Power: 60VA Particle size: 0.02 µm to 2000 µm Lasers: Bxzqjbv8Dy Red: gas laser with a wavelength of 633 nm Blue: LED, wavelength: 466 nm Fpsdpsx Niiyefx Akysn This product consists of two separate units: Mastersizer 2000, Hydro 2000S, software included. Mastersizer external dimensions (W) x (D) x (H): 133 x 30 x 40 cm Hydro 2000S external dimensions (W) x (D) x (H): 34 x 35 x 34 cm

Condition: excellent (used), For sale: professional installation tool (SETTING TOOL) for KOENIG EXPANDER® components, manufactured by SFC KOENIG. Model: ExTool 040-2 Type: Setting Tool / Installation Tool Application: Installation and activation of KOENIG EXPANDER® components Manufactured in: Germany The device is designed for controlled setting (activation) of plugs, restrictors, and valves of KOENIG EXPANDER® into precision bores – without threading and without heat treatment. — Condition • Very good technical and visual condition • No cracks or damage • Working element is straight, clean, and unworn • Normal, minor signs of use • Complete set exactly as shown in the pictures — Application • Installation of KOENIG EXPANDER® plugs • Automotive industry • Precision hydraulics • Hydraulic blocks, housings, machine components • Series production and maintenance — Fpedpfxoyc Ig Aj Akyen Set includes • KOENIG EXPANDER® ExTool 040-2 installation tool • Original carrying case • Working hose • Working container / reservoir • Manufacturer's manual • Accessories as shown in the photos

Year of construction: 2001, condition: excellent (used), functionality: fully functional, CNC mandrel bending machine including O-ring assembly Fully automatic, high-precision production cell for the series production of pipework systems (e.g. brake, fuel or hydraulic lines), including a robot, feeding system, dual O-ring assembly and high-quality testing technology. Fodpfjzz Hmqox Akyepn The system combines the legendary precision of a MIIC CNC bending machine with the flexibility of robot-assisted handling and integrated quality assurance. The system is ideal for suppliers to the automotive industry, mechanical engineering or fluid technology sectors. Technical data 1. CNC mandrel bending machine Manufacturer: MIIC (Chubu MIIC Co., Ltd., Japan) Type: EMO-20R-S Year of manufacture: 2001 Control system: Multi-axis CNC control with operator panel Special features: Collet head movable in X / Y / Z, equipped with 3 bending planes for highly complex three-dimensional shapes without tool changes. 2. Loading and unloading robot Manufacturer: Motoman (Yaskawa) Model: ERCS-UP6-A00 Year of manufacture: 2000 Robot control: XRC including original teach-in terminal (handheld control unit) 3. Automatic O-ring assembly stations Manufacturer: ASM HASEMO GmbH Type: MOSA-800 / MOSA-1100 Year of manufacture: 2010 (high-quality upgrade/retrofit) Function: 2 O-ring assembly stations including a complete bulk material feed system (vibration hoppers/spiral conveyors) for twist-free and gentle external assembly of sealing rings. 4. Quality assurance & peripherals Measuring computer / leak tester: Innomatec, type: LT-C602 (for direct in-line testing) Blow-off station: Integrated for cleaning

Condition: ready for operation (used), Year of construction: 2021, overall weight: 217 kg, load capacity: 6 kg, arm reach: 2,011 mm, number of axes: 6, This 6-axis PANASONIC TAWERS TM-2000WG3 Super Active Wire was manufactured in 2021. It features a maximum reach of 2,011 mm and a payload capacity of 6 kg. The system includes a 350 A welding power source and is equipped with advanced welding processes such as SP-MAG and Pulse MAG. If you are looking to get high-quality welding capabilities, consider the PANASONIC TAWERS TM-2000WG3 Super Active Wire robot arm we have for sale. Contact us for further details. • Welding power source: 350 A • Welding processes: SP-MAG / Pulse MAG (MIG optional; TIG DC optional) • Repeatability: ±0.10 mm or better • Maximum robot rapid movement: up to 180 m/min • Motion ranges: base ±170°; upper arm -90° to +165°; forearm -80° to +210°; wrist rotation ±270° • Maximum axis speeds: base 195°/s; upper arm 197°/s; forearm 205°/s; wrist up to 629°/s • Wire feeding capability: Super Active Wire • Safety system: CE compliant Additional equipment • Güdel TMF-1 linear track (2,000 mm travel; repeatability ±0.02 mm) with drive, servo control and track structure • 2 × Panasonic servo-controlled rotary positioners + positioner servo control system • 2 × workpiece frames (approx. 3,500 × 1,500 mm) providing 2 welding/loading stations • Super Active Wire welding torch • Wire Booster system • Wire spool stand / wire cassette • Torch cooling unit • Torch cleaning station • Touch Sensor • Arc Sensor • Power transformer • Robot cable package • Robot/positioner support structures • 2 × safety light curtains and complete cell guarding • Control and integration system • Robot controller / control cabinet Main Components Included • Panasonic TM-2000WG3 welding robot • Panasonic 350 A welding power source • Robot controller / control cabinet • Super Active Wire welding torch • Wire Booster system • Wire spool stand / wire cassette • Torch cooling unit • Torch cleaning station • Touch Sensor • Arc Sensor • Power transformer • Robot cable package • 2 × Panasonic rotary positioners • Positioner servo control system • 2 × workpiece frames • Güdel TMF-1 linear track, 2 m • Linear track drive • Linear track servo control Fpodpez Dtn Dofx Akyen • Güdel track structure • 2 × safety light curtains • Robot / positioner support structures • Complete cell guarding • CE safety system • Control and integration system

Condition: new, Selling price: € 1.000, US$ 1.053 Bucket volume: 7.1 m^3 Buckets for Liebherr 974 and Terex RH40 Fpjdpepa Rqcefx Akyen Orange bucket is for Doosan DX500 We become your solution partner for your mining sites. Contact for detailed information, price is representative.

Year of construction: 2026, condition: new, Motorised Tilting KETTLES Frying Pan with Scraper, tiltable, made entirely of stainless steel for food preparation, which can be unloaded onto trolleys by means of motorised tilting, maintaining the height of the unloading mouth It is manufactured with a double thermal oil bottom and an inner tank that is easy to clean by means of a removable remover with blades that rub against the walls to prevent the product from sticking and subsequent cleaning. It is double-sided with a total thermal insulation coating to save energy. Technical features: It has a control panel with electronic touch screen for programming, speed control and direction of rotation of the scrapers, frying temperature, frying time and recipe programme. Acoustic warning system at the end of the programme. Automatic emptying of the product by means of a button on the panel. Models SBE100A, SBE150A and SBE200A are fitted with castors. Stainless steel feet with height adjustment on models SBE300A and SBE500A. Fpjdpsg A Rhgsfx Akyen The electric models have armoured heating elements immersed in thermal oil that produce homogeneous heating throughout the frying pan. The gas models have very precise ventilated burners, electronically controlled, which can be LPG, NG or Diesel. Adjustable temperature from 50 to 210ºC. Recipe book on programmable electronic board. Capaciti 10, 24,50,100,150,200,300 y 500 L. Price from 4989€.

Condition: ready for operation (used), power: 11 kW (14.96 HP), planing width: 810 mm, number of blades: 4, For sale is a robust Panhans thickness planer, model DH 810, featuring a large planing width and a clear digital display for the planing depth. Technical data / Equipment: + Planing width: 810 mm + Motor power: 11 kW + 4-knife planing shaft + Digital display for the set planing depth + Two rollers in the thickness table to assist with workpiece transport + Robust, heavy-duty construction Fpodpfxez I T Dae Akyen Inspection and test run possible by arrangement in Haldensleben. Invoice with VAT shown. Transport can be arranged for an additional charge.

Condition: new, Year of construction: 2026, control type: manual, degree of automation: manual, actuation type: manual, working width: 1,020 mm, bending angle (max.): 135 °, sheet thickness (max.): 2 mm, Bernardo TB 1020 is a universal, manual segmented bending machine with a working length of 1020 mm, ideal for sheet metal work in repair and craft workshops. The machine features a robust construction and a foot-operated upper beam clamping system, allowing the operator to position the workpiece freely with both hands. Thanks to the exchangeable segmented upper beam, the machine precisely forms various profiles and boxes from sheet metal up to 2.5 mm thick. Fpedeyn Iiuepfx Akyon - Bending machine for universal use in repair and metalworking workshops - Compact, stable design with a modern look - Simple adjustment of the upper beam clamping via foot pedal; both hands remain free to accurately position the workpiece - Manual bender for standard tasks - Segments on the upper clamping beam expand bending possibilities - Offered at a competitive price - Fast and easy operation with a handle - Pedal covered with non-slip rubber sheath - Simple lower beam clamping adjustment to suit sheet thickness - High upper beam clamping force for tall bend profiles - Segment sizes: 2.5 / 3 / 3.5 / 4 / 4.5 / 5.0 / 7.5 / 10 / 15 / 20 / 27 cm Technical specifications: Working length: 1020 mm Max. sheet thickness (mild steel): 2.5 mm Max. opening: 48 mm Bending angle: 0 - 135° Dimensions (width): 1350 mm Dimensions (depth): 1115 mm Dimensions (height): 1140 mm Weight approx.: 290 kg