Used Pallet Production Line for sale (27,572)

Year of construction: 1990, condition: like new (used), Short/ Noodles pasta line: - capacity 400 kg / h - Delivery conveyor - mixer Lsdpfx Ash Dxgasftohi - dispenser, water / flour, horizontal - worm conveyor - Press - Vibro feeder , reconditioned in 2010 - First dryer , reconditioned in 2010 - Secound Dryer - Two drying strips - Two strips for dried pasta - Metal Detector - Automatic packing unit

Condition: new, Year of construction: 2024, operating hours: 100 h, Automatic wooden pallet production line. Manufacturer - STORTI  Year - 2024 Capacity - 4-5 pallets/min. The pallet legs (logs) are fed automatically on a chain conveyor belt, then the upper elements are positioned in the molds by the operator. Ledjxwl Dajpfx Aftjhi It moves to the first nailing machine where the upper part of the pallet is assembled. It is automatically rotated 180 degrees and prepared for the assembly of the lower part of the pallet in the second nailing machine. The corner chamfering, longitudinal milling and stamping of the pallet are then automatically performed. The newly formed pallet enters the automatic stacking installation with 90 degree rotation and turning function. NOTE : Line is instaled in 2025 and make 100 hours !   New line just put into operation!

Condition: good (used), Year of construction: 1992, Manufacturer - ERW Year - 1992 Range of round pipe - 21 - 76 mm Range of square pipe - 20x20 - 60x60 mm Sheet thickness - 0,8 - 3,5 mm Speed - 60 m/min. Lenght of line - 50 m Tools : square pipes - 25,32,38mm round pipes - 40, 51 mm Welding power - 180 KW Ljdpfxedlqkqs Aftehi Anode voltage - 14 kv Anode dissipation - 70 kw Frequency - up to 30 Mhz

Condition: refurbished (used), Year of construction: 2001, Working width 40-170 mm Thickness 9-50 mm 6 operator motors of 7.5 KW each Lhedpfxjqa Dq Io Aftei

Condition: good (used), Production line consisting of: - BACCI FC 8 - BACCI DOUBLE JET - KUKA robots Ljdpfx Afst Tw S Uetshi BACCI FC 8 The automatic copying-shaping-sanding machine executes milling and sanding operations on components of chairs, tables, armchairs, sofas, beds, furniture, frames, with the best finish and highest output. Max working length: 2700mm Max working height: 180mm Max working width: 500mm Max working width with round end: 350mm Max speed working table: 15m/min Max table return speed: 50-100m/min BACCI DOUBLE JET DOUBLE-JET is double machining centre with 6+6 interpolated CN axis, equiped with hopperfeeder system for automatic loading/unloading of the pieces.

Condition: good (used), Production line consisting of: - BACCI FC 8 - BACCI DOUBLE JET - KUKA robots BACCI FC 8 The automatic copying-shaping-sanding machine executes milling and sanding operations on components of chairs, tables, armchairs, sofas, beds, furniture, frames, with the best finish and highest output. Max working length: 4000mm Max working height: 180mm Max working width: 500mm Max working width with round end: 350mm Max speed working table: 15m/min Max table return speed: 50-100m/min Lhedpfx Afst Txfpetei BACCI DOUBLE JET DOUBLE-JET is double machining centre with 6+6 interpolated CN axis, equiped with hopperfeeder system for automatic loading/unloading of the pieces.

Condition: good (used), Pallet racking cutting machine, block cutting machine. Lsdjzd Rpuspfx Aftehi

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, Equipment: documentation/manual, We are selling a fully operational pellet production line with a capacity of 2-2.5 tons per hour. 1. Hammer mill with a new motor and magnetic separator 2. Transport fan with a new motor 3. Buffer tank with 2 cyclones and shut-off valves 4. Screw conveyor to the conditioner 5. Conditioner 6. Buhler pelletizer 7. Belt conveyor under the pelletizer 8. Cooler with a screen 9. Control cabinets The line can be inspected daily, and its performance can be checked. It is in good technical condition and has been in continuous use; it is not just a pile of scrap but a fully functional line. The price includes full training on how to operate the line. Ljdozdq T Tjpfx Aftshi The reason for the sale is the replacement with a much larger line. Please feel free to contact us.

Condition: excellent (used), Soup production line The line has been in operation for a very short time, only 3 years, and has been expanded with a mixer for producing hummus and cream soups. The cost of a new line of this type is two million euros. The line consists of the following equipment: - B200-500VA mixer with turbo booster - Main tank on a frame, 2017 - Valve station and frequency inverters - Containerized boiler for steam, gas-powered, 2017 - Climaveneta chiller, 2013 - FBL cooling tunnel, FL-10-2017 type - Spolex cup transport system, 2017 - OCS Checkweighers GmbH X-ray inspection device, 2017 - Radwag checkweigher, 2017 - PAG Dozo-Pak automatic packaging machine - Spolex cup drying system, 2017 - JET 3 inkjet printer - Documentation in Polish and English, declarations of conformity. Line for cooking and cooling ready meals, creams, soups, broths, jams, and marmalades, traditional and international dishes, sauces, and pastes. Installed as new in 2017. Thanks to the use of the Turbo Mixer B200, you can produce hummus and cream soups. Lhsdpfx Afoyc E Rfstji Please see my other listings.

Condition: new, Year of construction: 2026, operating hours: 1 h, Production line for prefabrication of wall/floor/roof panels in wood construction - BOOSTON MACHINERY – This offer concerns a production line with a length of 9m (other lengths available from 3m to 15m). We are a manufacturer and offer complete production lines/equipment/butterfly tables/rotational tables/workstations for the prefabrication of wooden walls, designed for prefabricated house factories, modular construction, and manufacturers of wooden structures. The offered set enables the complete production process: from frame assembly, through wall cladding, panel rotation, to the transport of finished elements. Composition of the production line: 1. ER-00R/900 Workstation Assembly table for the construction of wooden frames, equipped with pneumatically lifting transport rollers. Parameters: * length: 9000 mm * overall width: 3600 mm * working height: 700 mm * 2 lines of pneumatically lifting rollers Purpose: * assembly of wall frames * positioning of structural elements * transport of prefabricated elements between workstations 2. SD-01 Clamping Cylinder Set A set of 6 clamping cylinders for the ER-00R workstation. Parameters: * quantity: 6 pcs * clamping force: 140 kg at a pressure of 8 bar Purpose: * clamping structural elements during assembly Lhedpfxjzc Uwbj Aftoi * stabilizing the prefabricated element during fastening and assembly 3. MT-01 Material Bridge Mobile bridge for the transport of panels and structural elements. Parameters: * load capacity: 800 kg * swiveling wheels 360° * manual movement between workstations Purpose: * transport of structural panels * transport of materials between workstations 4. ER-03H/900 Butterfly Table with Hydraulic Drive A workstation designed for rotating prefabricated walls and a separate workstation for assembling the frame and cladding (wing no. 1). - Wing No. 1 Parameters: * length: 9000 mm * width: 3600 mm * height: 700 mm * maximum load: 2500 kg * 3 lines of pneumatically lifting rollers Purpose: * assembly and transport of prefabricated elements * rotating walls - Wing No. 2 Parameters: * length: 9000 mm * width: 2300 mm * height: 700 mm Equipment: a set of roller pins for vertical transport of prefabricated elements onto transport trolleys 5. WP-01 Transport Trolley Set A set of 3 transport trolleys for picking up finished walls. Parameters: * adjustable support height * maximum load capacity of the set: 2500 kg Purpose: * picking up finished prefabricated elements * transport of walls in a vertical position ## Why BOOSTON MACHINERY? ✔ We are a machine manufacturer – you buy directly from the manufacturer, without intermediaries. ✔ Possibility to see the machines live in our production and storage hall. ✔ Products and components manufactured in Europe. ✔ 12 months manufacturer's warranty. ✔ Simple, durable, and proven design for use in prefabrication plants. ✔ No complex automation and extensive electronics – reliable mechanics designed for many years of operation. ✔ Modular design that allows for later expansion of workstations. ## Expansion Options We manufacture tables and production lines in the following lengths: 3.0 m • 4.5 m • 6.0 m • 7.5 m • 9.0 m • 10.5 m • 12.0 m • 13.5 m • 15.0 m

Condition: used, Brand: Subal Model: T20 Lhjdpfx Afeym Uk Astei Year of manufacture: 2010 Compliance: CE standard Integrated equipment: - Automatic dough divider-rounder - Intermediate proofing station - Horizontal moulding machine - Optional small bun cutting up to 50 g Performance & Production: - High productivity for bakeries and industrial workshops - Automated operation for optimum time savings - Consistency and precision in moulding Ideal for: Industrial bakeries Large pastry shops Bread production facilities

Condition: used, Composed of: 1) Dough storage hopper Mod. 'STAR' 2) Conveyor L=500 Mod. 'TRL' 3) Dough extruder Mod. 'RON 1/480' 4) Conveyor L=700 Mod. 'MCI 690' 5) Dough flouring unit L=700 Mod. 'B/M 700L' 6) Multi-roller unit Mod. 'MUL 700' 7) Conveyor L=700 Mod. 'MCI 690' 8) Fat extruder Mod. 'EG-7-E' 9) Overlapping conveyor belts Mod. 'NPP/200' 10) Conveyor L=700 Mod. 'MCI 690' Year of manufacture 2006 Lhjdpjwxwiaefx Aftoi

Year of construction: 2011, condition: ready for operation (used), A complete Stürtz window production line is available. 1) Stürtz STBAZ-IPT-4000-V bar processing system for frames, sashes and mullions, year of manufacture: 2004. 2) Stürtz SE HSM-25/26-Compact-Plus four-head welding machine for sashes, year of manufacture: 2006. 3) Stürtz 4MC Motion Control CNC cleaning machine for the sash line, year of manufacture: 2011. 4) Stürtz WST-25-CNC turning station at the sash cleaner (3), year of manufacture: 2011. 5) Stürtz SE-HSM-40/26-Compact-Plus horizontal four-head welding machine for frames, year of manufacture: 2006. 6) Stürtz 2MC Motion Control CNC cleaning machine in the frame line, year of manufacture: 2008. 7) Stürtz WST-30 turning station in the frame line, year of manufacture: 2008. 8) Stürtz SE-BHT-3000 brush lifting table as a stop and transport table before the sash stop, year of manufacture: 2008. 9) Stürtz FBS-1 sash hardware screwing machine in continuous operation, year of manufacture: 2008. 10) Stürtz SE-VW-FT distribution and stacking trolley in the sash buffer system, year of manufacture: 2008. This is a complete production line for window construction. Documentation available. An on-site inspection is possible. Lsdpfx Aszcyqmoftohi

Year of construction: 1998, condition: used, Technical details: profile width: 50 mm work height max.: 950 mm interface: RS 232 Pinout Window profile processing machine for materials such as plastic, aluminum and wooden windows in a continuous process. The materials are conveyed by a pneumatic transport and clamping system. The system consists of two work stations (machines), an electrical control cabinet, and a control panel and transport units. As well as columns with transport system vibrator, chip transport unit and column with receipt printer. Our photos are first taken from the location and then further pictures are how the plant is stored in our stock ready for transport. Workstation no. 1 (machine 1): -sawing station with saw blade Ø 400 x 4,5mm -drilling unit with clamping cartridge (vertical upwards) -drilling unit with clamping cartridge (hotizontal) -Boring with clamping cartridge (vertical down) -twin drilling unit with clamping cartridge (vertical down) -45° drilling unit with clamping cartridge (upwards) Working station no. 2 (machine 2): -drilling unit with clamping cartridge (vertical upwards) -milling spindle horizontal with 11 side milling cutters -Drilling unit with clamping cartridge (vertical down) -Drilling unit with clamping cartridge (vertical upwards) -Drilling unit with clamping cartridge horizontal Lhjdou Ibuwjpfx Aftsi 2 transport units: motor driven -LxWxH: 5.650 x 2.400 x 1.000mm -track width 1.980mm 2 pieces transport units: motor driven -LxWxH: 2.150 x 2.750 x 1.050mm -track width 2.300mm *

Year of construction: 2012, operating hours: 3,500 h, condition: used, functionality: fully functional, P System fully automated hydraulic pelleting line with patented hydraulic pelleting system. Mono roller, hydraulically operated with a unique load sensing system. Features automatic vegetable oil injection at startup and shutdown. Continuous rated production 350kg/hr (peak 500kg/hr) - Fully automatic, operates without human intervention. In its current setting it worked 12hrs continuously alongside log production, but can operate continuously if required. Line includes the following:- 50m³ moving floor container with hydraulic operated lid. Material level viewing windows, and unloading cross auger. Lodpfozcf Dlex Aftjhi Incline discharge auger with magnetic separator. First stage hammer mill for material up to P16 (G30). Pneumatically conveyed to minisolo. Mini silo distribution hub with hydraulic agitator. Equipped with cyclone and transfer fan. The unit has an additional port covered with a blanking plate to allow addition of another pelleting module. Second stage hammer mill and rotary valve controlled by pelleting module. P300 - 30kW pelleting module with PCL control system. All motors other than the main drive are hydraulic and controlled by the pelleting module. The system has a moisture sensor which injects water into the second stage hammer mill to control pellet quality. Die temperature is monitored by a temperature probe and controlled by compressed air injection. Automatic oiling system on startup and shutdown. 6m Discharge cooling and screening auger. Pellets are conveyed, cooled and screened for dust by hydraulically driven auger. Double filter air extraction unit. The line is in good condition and comes with a set of spare parts, dies and rollers. PCL control unit and main drive gearbox were replaced over a year ago. It has been serviced well and can be demonstrated working if required, with your material. Not included in offer, but available by request 4000L pellet hopper made from galvanised steel metal, with pneumatically operated hopper. Semi-automatic bagging plant, 5kg - 30kg capacity. Plastic sack heat sealer. Pellet quality test equipment. 5m Bucket elevator made by Perrys of Oakley.

Year of construction: 2021, operating hours: 5,000 h, condition: used, functionality: fully functional, EPS Complete Production Line For cutting and packaging EPS blocks: Model: VIRO HV Q-4 Y 2021, Price: €459,000 Includes a side scrap handling unit, bale/bundle packaging unit, bale marking and paint marking unit for color-coding bales, and a separate dust compaction unit for stack formation. Also includes a weighing unit, automatic block tilting, automatic cutting wire adjustment, optional manual removal, and a semi-automatic equipment group for producing bales with a minimum size of 50x100 cm and for creating stacks. Designed for handling blocks 3-4 meters long. Lhodpfx Aszcdqqsftji Used for 5,000 operating hours. In like-new condition. EPS Block Molding Machine: Erlenbach Y2004 EBV 3080x1040x1040, Price: €77,000 EPS block production equipment, automatic operation, with mixing of fresh and recycled materials. Reliable, accurate, and easy to operate. Used for 18,000 operating hours. EPS Pre-Expander: Y 2008 Erlenbach Pre-expander EVD 1000, Price: €42,500 Batch pre-expansion equipment with automatic weighing and fluidized bed. Reliable, precise. Used for 18,000 operating hours. Steam Boiler Y2008, Manufacturer VASFA Kft Szolnok, Type AKH 1/12 EU, Price: €51,000 1 t/h, 660 kW Operating pressure: 12 bar Checked pressure: 19.4 bar Reliable, continuously maintained. Used for 18,000 operating hours.

Condition: like new (used), Year of construction: 2023, operating hours: 30 h, functionality: fully functional, machine/vehicle number: JSUP-1703, PAPER STRAW PRODUCTION LINES FOR BEVERAGE CARTONS (U-SHAPE & I-SHAPE) Location: Poland (European Union) Manufacturer: Zhejiang Jinshen Machinery Manufacture Co., Ltd. Year of Manufacture: 2023 Condition: Excellent – Installed, commissioned, tested and fully operational Availability: Immediate Complete Turnkey Production Solution for Beverage Carton Paper Straws Unique opportunity to acquire two nearly new production lines for paper straws used in aseptic beverage cartons (milk, juice and beverage packaging). The equipment was professionally installed and successfully commissioned in Poland. All machines are fully functional and available for immediate inspection. Line 1 – U-Shape Paper Straw Production Line Complete automatic production line including: Paper straw making machine JS-PT22-2010F Flexible straw forming machine JSFP-2021-30 U-shape automatic packing machine JSUP-1703 Microwave dryer 2 × circulation heaters Carton filling machine Conveyor assembly line Vision inspection system Capacity: up to 600–800 pcs/min Suitable for beverage carton applications requiring individually packed U-shaped paper straws. Line 2 – I-Shape Paper Straw Production Line Complete automatic production line including: Paper straw making machine JS-PT22-2010F Microwave dryer Vision inspection system I-shape straw packing machine 2 × carton filling machines Capacity: up to 800–900 pcs/min Designed for straight paper straws used in beverage carton packaging systems. Advantages ✅ Machines located in the European Union ✅ No waiting time for production in China ✅ No import duties or overseas shipping delays ✅ Installed and successfully tested ✅ Immediate availability ✅ Modern Delta PLC control systems ✅ Vision inspection systems included ✅ Suitable for food-grade production Technical Highlights Straw diameter: 3.0 – 8.0 mm Production speed: up to 100 m/min PLC control: Delta HMI touch screens Ethernet communication Automatic counting and monitoring Food-grade manufacturing standard Remote maintenance capability Ideal For Paper straw manufacturers Beverage packaging suppliers Dairy packaging producers Contract packaging companies Investors entering sustainable packaging markets Sale Options Complete package (both lines) U-shape line separately I-shape line separately Inspection The equipment can be inspected under power at our facility in Poland. Additional photos, videos, technical documentation and machine specifications are available upon request. Contact METALTON Sp. z o.o. Poland For detailed information, pricing and viewing appointments, please contact us directly. Lsdpfozb Uwlex Aftshi Keywords: Paper Straw Machine, U Shape Straw Machine, I Shape Straw Machine, Tetra Pak Straw Production Line, Beverage Carton Straw Line, Paper Straw Packaging Machine, Sustainable Packaging Equipment, Straw Manufacturing Line, Beverage Packaging Machinery.

Condition: like new (used), Year of construction: 2020, Rubber extrusion NBR&PVC Insulation sheet production line / available immediately Lsdpoy Exrpsfx Aftjhi The machine line can be delivered immediately, with few operating hours and in new condition. The units of the production line: 1. ￠150mm20D cold feed vacuum extruder(Standard) 2. Rubber sheet head(Pneumatic) 3. 6m infrared curing oven (width 1000mm) 4. 6m hot air curing oven(width 1140mm) 5. 6m hot air curing oven(width 1440mm) 6. 6m hot air curing oven(width 1600mm) 7. 6m hot air curing oven(width 1800mm) 8. 6m hot air curing oven(width 2000mm) 9. 6m hot air curing oven(width 2300mm) 10. 6m hot air curing oven(width 2500mm) 11. 6m hot air curing oven(width 2800mm) 12. 36m (in 3 layers*12m) transmission & cooling system 13. Automatic sheet cutter & trimming machine (one) 2000 mm 14. One large Chiller with water tank 15. Gas heating 16. PLC If you are interested, we will send you a detailed description and data.

Condition: ready for operation (used), Year of construction: 2015, Complete hamburger production line by VEMAG Manufacturer: VEMAG Maschinenbau GmbH – Germany Line model: Roobot 500 + FM250 + SC261 equipment set Condition: Used, very good Year of manufacture: 2015 / 2020 Set description The VEMAG hamburger production line is a fully automated system designed for forming, portioning, and arranging meat, poultry, fish, or vegetable-based burgers. The equipment provides high throughput, precise portioning, and excellent shape consistency while maintaining a high standard of production hygiene. The line consists of three main components: 1. VEMAG ROOBOT 500 filling machine (year 2015) Automatic feeding system – the main drive of the line. Controls the movement and dispensing of the filling into the forming machine. Ljdozb I Ecopfx Aftshi Equipped with a feeding system with precise portion control. Ensures consistent output and accurate weight. Made of stainless steel with a hygienic design suitable for high-pressure washing. Key technical data: Output: up to 6000 portions/hour (depending on the raw material) Portion range: 20 to 300 g Drive: electric / pneumatic 2. VEMAG FM250 (year 2020) Burger forming machine – the newest component of the line. Forms burgers, patties, meatballs, vegetable products, and fish products. Variable shape and thickness – quick die changes are possible. Integrated system of forming plates with adjustable size. Ideal for precise forming of high-quality surface products. Technical data: Burger diameter: 60–130 mm Output: 100–180 cycles/min Material: stainless steel AISI 304 Works in conjunction with Roobot 500 3. VEMAG SC261 (year 2015) Belt conveyor / separator: Collects the formed products and arranges them in rows. Variable belt speed and transport direction. Easy to disassemble and clean. Technical data: Material: stainless steel Control: electronic, compatible with FM250

Condition: new, A first in Turkey; Our company carries out the production of the machines that enable the production of single-layer insulated panels, under our own patent and license. Our sandwich panel machines operate in 30 different regions of the world. Single layer insulated panels are also called economical eco sandwich panels. Please contact us for additional information and technical documents. Lhjdpfx Afjf Nqlqotei

Condition: good (used), Complette line. Lhsdpfsy Txzaox Aftei

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, LINE FEATURES 4-head welding machine FUSION 4H Frame unloading unit First milling module Q-MATIC 1 Serial connection between welding machine and cleaning machine Lhjdpfx Afey S E E Notji Rotating table Electronic cleaning machine TRIMMER 4A Extraction table Second milling module Q-MATIC 2 Line supervisor laptop Refilling unit Automatic frame unloading

Year of construction: 2000, condition: used, Complete Production Line for Shoe Lasts Manufacturing We offer a complete technological production line for shoe lasts manufacturing — a fully integrated and coherent industrial system designed for reliable, continuous production. The entire line is maintained in very good technical condition. All machines are characterized by: High manufacturing quality Robust industrial construction Low wear level Long-term operational reliability Stable production performance This production system enables a continuous and optimized workflow — from raw material preparation, through semi-finished components, to final machining and assembly processes. The line represents a complete and proven industrial process, ready for immediate operation in manufacturing conditions. European Industrial Quality All equipment originates from renowned Italian manufacturers, including: ARBO Oleodinamica Donzelli Gruppo San Rocco Meber These manufacturers are recognized for: Precision engineering Durability Industrial-grade performance Lhodoza Ak Repfx Aftji Proven European manufacturing standards LINE STRUCTURE 1. Raw Material Preparation Section 1.1 Granulation Machine 1.2 Material Mixer 2. Semi-Finished Production Section 2.1 Injection Molding Machine (for blanks) 2.2 Standardization Unit 3. Pre-Machining Section 3.1 Last Cutting Saw 3.2 Pre-Copy Milling Machines (2 units) 3.3 Finishing Copy Milling Machines (2 units) 4. Special Machining Section 4.1 V-Cut Milling Machine 4.2 V-Cut Saw 4.3 French Cut Saw 4.4 French Cut Milling Machine 4.5 Chain Milling Machine for Locks 4.6 Pin Insertion Machine for Locks 5. Drilling, Machining & Assembly Section 5.1 Bushing Drilling Machine 5.2 Bushing Installation Machine 5.3 Multi-Spindle Drilling Machine for Pins 5.4 Last Plate Cutting Machine 5.5 Punching Machine 5.6 Secondary Punching Machine 5.7 Steel Processing Machine 5.8 Plate Forming Machine 5.9 Automatic Trimming Machine 5.10 Last Assembly Tool 6. Finishing Section 6.1 Toe Trimming Machine 6.2 Heel Trimming Machine 6.3 Grinding Machines (2 units) 6.4 Cleaning Machines (2 units) 7. Recycling & Waste Management System 7.1 Chip Grinding Machine 7.2 Industrial Dust Extraction System 8. Tooling Section 8.1 Knife Sharpening Machine

Condition: new, Year of construction: 2026, functionality: fully functional, Pallet Board Stacker PBS M4 + DS-1.0 Automatic Pallet Production Line Stacker with Crosscut saw (DS-1.0) Automatic pallet board stacker designed for efficient integration into pallet production lines. Ensures precise board alignment, stable stacking and high production capacity with minimal manual handling. Included equipment: -Control program -Stacker with integrated lift -Board unscrambler -2 spacer dispensers with support frame -Discharge conveyor with lift platform -Package lift for easy forklift handling Lhodpfxezaucle Aftji -Suitable for continuous industrial pallet board production. High-performance double-rip crosscut saw designed for seamless integration into automated board production and stacking lines. Crosscut saw (DS-1.0) -Specifically built to operate within a board stacker line. -Synchronized Workflow - automatically matches the speed of the stacker for maximum efficiency. -Clean Cuts - precise double-blade system for high-quality cross-cutting. -Designed for 24/7 sawmill environments. -Ideal for sawmills looking to automate the transition from cutting to stacking with zero bottlenecks.

Condition: used, Year of construction: 2021, functionality: fully functional, total width: 12,000 mm, total length: 34,000 mm, input current: 600 A, number of previous owners: 1, space requirement length: 30,000 mm, Complete production line for baseboards, including: debarker, log cutting saw, material separator, centering machine, multi-blade ripping saw, stacker, two surfacing machines, wood chipper, and sawdust/chip separator. Lhodpey U Ikaefx Aftei