Used Paint Drumming for sale (6,610)

Condition: good (used), Kecol Maxiprime 800 drum pump Bsdpfsu S Rkgsx Aafecu Stainless, pneumatically operated, 130L per min, up to 12mm solids, previously used for pumping fruit juices out of tote bins

Condition: used, Year of construction: 2016, operating hours: 232 h, * Engine power: 55.4 kW * Weight: 8,500 kg * Operating hours: 216 h * Model: CA1500D -----Internal vehicle number: 10613----Subject to errors and prior sale. Bedsvyx Eyepfx Aafjcu WhatsApp support available! If you have questions about the vehicle or would like further information, feel free to contact us conveniently via WhatsApp WhatsApp German, English -- WhatsApp German, English, Arabic

Year of construction: 2009, condition: good (used), Spring balancer, cable pull-out, reel, spring cable drum, spring cable drum, spring drum -Manufacturer: Conductix Wampfler, spring drum spring cable reel -Type: BEF 325524-0404-2DI (T)H/L -Current: 3x25A PE -Voltage: 415V -Protection class: IP65 Bcodex R Svlopfx Aafeu -Cable: not included -Dimensions: Ø 550 x 440 mm -Own weight: 32 kg

Condition: new, The comfortable Varioflex rack trolley is designed for the flexible and gentle storage of painted workpieces. Additionally, its 4 swivel castors allow for easy transportation of the workpieces. Its robust tubular frame construction can be adjusted from 200 to 2000 mm. With 17 inner and outer support tubes per side, the trolley can carry loads up to 400 kg when evenly distributed. The removable inner and outer support tubes can be taken out if required and reinserted at the back. When not in use, the rack trolley can be compactly folded for space-saving storage. Optional accessories: - Plastic-coated support tubes - Additional rack Technical Data: Length: 200 - 2000 mm Bjdpfsw I Ux Njx Aafecu Depth: 870 - 1180 mm Height: 1855 mm Support tube length: 650 mm (extendable to 1150 mm) Clear distance between the tubes: 70 mm Capacity: 400 kg The image shows optional accessories (additional rack).

Condition: new, - Mobile design - high degree of separation, high extraction performance - easy to handle - long filter service life, therefore little downtime - more flexible thanks to extraction technology Bcedpfx Aasu T Hrpjfou with front plate system - certified for ATEX Zone 2 ----- Technical data ----- Air output: 4,600 m³/h, usable pressure: 500 Pa, Filter area with pre- and fine filter: 1 m², Connection Ø: 300 mm, Motor 400 V: 1.5 kW, motor speed: 1,410 rpm, Dimensions (LxWxH) open: 1,897 x 1,405 x 1,144 mm, Dimensions (LxWxH) closed: 1,012 x 1,405 x 912 mm, Weight: 175 kg + 5 m cable with plug and throttle valve

Condition: like new (used), Year of construction: 2012, functionality: fully functional, total width: 2,600 mm, Stationary Automatic Electrostatic Powder Coating System The system design is based on the implementation of the customer-specific desired flexibility and functionality. Additionally available system components such as the IPS coating system with Smart Feeding Technology (SFT) and fully automatic color change or the use of Z-axes - for the dynamic individual feed of the guns during the coating of a component synchronously with the vertical stroke movement enable excellent coating results. SuperTech Kabine Beschichtungs-Kabine Bcsdpfxsvy Eaqe Aafsu Nachfiltereinheit Filtersteuergerät MFS 07 PrimaCenter Pulverbehälter Pulverversorgung Frischpulverfördereinheit Pulverpumpe IP 5000 Pulverinjektor PI-F1 PI-P1 Lineareinheit Pulverpistole PEA-C4HiCoat

Condition: used, Manufacturer: Winkworth Model: CT 213 Type : Rotary mixer for drums Maximum product size : Ø 40 x 55 cm Product fixing : Manual Speed variation : Mechanical Mixing speed : 18 – 105 rpm Timer Bjdex R A N Aepfx Aafecu Mode: manual / automatic Materials: Stainless steel Tuscan motor 0.37 kW – ATEX Class EExd II B T4

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, Paint/spray wall dimensions without fan and control Panel! Extraction surface - dimensions (mm): 2190w)x2350(h) Overall dimension(mm): 2295(w)x2295(h)x810(d) Technical data: - Fan power 2.2kW (ATEX) - Fan suction capacity: 12000 m³/h (max 1100Pa) - Connection voltage: 400V - Frequency converter for smooth regulation of the fan - Three-stage air filtration - Intended for explosive environments - EX - Complete technical documentation - CE Documentation - Warranty Bsdpfx Aaeia Ta Asfscu Possibility to order machines in various individual configurations and dimensions! Do not hesitate to contact us.

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, Paint/spray wall dimensions without fan and control Panel! Extraction surface - dimensions (mm): 3000(w)x1400(h) Overall dimension(mm): 3100(w)x1850(h)x810(d) Technical data: Bedpoia Ta Hsfx Aafocu - Fan power 3kW (ATEX) - Fan suction capacity: 16000 m³/h (max 1100Pa) - Connection voltage: 400V - Frequency converter for smooth regulation of the fan - Three-stage air filtration - Intended for explosive environments - EX - Complete technical documentation - CE Documentation - Warranty Possibility to order machines in various individual configurations and dimensions! Do not hesitate to contact us.

Year of construction: 2011, condition: used, Make: B&M, Year of manufacture: 2011, Part size: 1,200 x 800 x 400 mm, comprising: 4 painting robots, paint dryer, heat medium natural gas, max. temperature 100°C, exhaust air volume flow 1,500 m³/h, circular conveyor system by Hero, batch of load carriers, control and switch cabinets, preparation and supply racks, platform system, stairway access, accessories. Bodpfex Ry Rdex Aafecu +++ Attention: Machine is part of an online auction! +++

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 250 mm, pass-through width: 250 mm, overall weight: 650 kg, The Ceetec A250 is a medium-sized unit from the series of coating machines and is therefore ideally suited for use in industrial and production facilities, such as paint shops, joineries, sawmills or building supply stores offering facade boards, decking, soffits, structural timber, etc. Bcodpfoxhc Tmox Aafou The device is most commonly used in manual mode, which means that the workpieces are loaded and unloaded by hand. Wooden components are conveyed horizontally through the machine by an automatic feed system. The Ceetec A250 ensures high-quality finishing thanks to its eight rotating brushes, each of which can be individually adjusted. Excess paint recirculates in a closed-loop system through a filter and back into the tank. The closed-loop circuit ensures optimal paint usage. The unit is supplied complete with brushes and a bag filter, making it ready for operation after connecting to a power source. The Ceetec A250 is a standard model, which means it is typically in stock and can usually be delivered at short notice. Brush coaters of the A-series are easy to keep clean. Consumable parts that naturally wear out are stocked in our warehouses, ensuring availability and fast delivery times. Thanks to the modular design of the machines, the operator can handle the replacement of most parts independently. The machine can be additionally equipped with a variety of brushes, bag filters with different mesh sizes, roller tables, and paint trolleys, among others. For processing raw wood, it is recommended to install a cleaning unit to remove dust and shavings before the machine. The device is intended for use with water-based products. ADVANTAGES OF CEETEC A250: Independent adjustment of brush heads Application system using low-pressure nozzles and distributing brushes on all four sides of the workpiece Closed-circuit operation enabling recovery and reuse of excess preservatives Adjustable feed speed Can be equipped with a unit for handling short elements (from 800mm) Option to fit a 2m roller table at the machine infeed and outfeed Basic working parameters: Speed: from 18 m/min to 42 m/min Workpiece dimensions: Max. H: 250 mm x W: 250 mm. L: Min. 2000 mm. (other sizes available!) Power supply: 3 x 380 V + PE IP. Class 54 Machine dimensions: 2450 mm x 1200 mm x 2000 mm (height) Net weight: approx. 600 kg

Condition: new, Year of construction: 2024, ### 🔫 ProfiGun PM-1 powder gun Lightweight, ergonomic, perfectly balanced with a contoured grip. ✋⚖️ Adjust powder output and switch programs directly on the gun. 🎛️ Ceramic cascade up to 100,000 V for efficient charging of all powder types. ⚡ New-generation nozzles improve penetration on complex parts. 🎯🧩 Profiled nut for a secure grip + conductive handle for excellent operator grounding. 🔩🧤 Impact-resistant materials, fully demountable design, replaceable powder path tube. 🛡️🛠️ Patented in the EU and US. Polarity: negative. 🇪🇺🇺🇸➖ One-piece powder path + quick-release hose coupling reduce leaks and speed up hose changes. 🔌✅ ### 💨 ProfiJector powder pump Efficient injector with an optimized feed angle validated by research. 📐🔬 Lower powder and air consumption vs. right-angle injectors, with low running costs. ♻️📉 European patent protected. 🏅 ### 🖥️ PSS controller - 7" touchscreen 7-inch glove-friendly touch panel. 🧤📲 3 auto programs: overcoating, hard-to-reach areas, flat surfaces. 🔁 Fine tuning: 0.1 kV and 0.1 uA resolution. 🎚️ Advanced pneumatic valves for precise air dosing (patent pending) + real airflow measurement to detect drops or blockages. 💨📈⚠️ Diagnostics, program naming, external control via Modbus. 🧠🔧🔌 ### ⚡ ProfiCharge ceramic cascade (made in Poland) Bcsdpfoflpi Nox Aafju High-precision ceramic cascade up to 100,000 V, manufactured in Poland. 🇵🇱⚡ High-frequency ion emission (up to 17,000/sec) improves charging - less powder to the collector, more on the part. 🎯📉 Ultra-precise current control: 0-100 uA, stable even below 10 uA (0-10 uA focus with 0.1 uA steps). 🎛️ ### 💨 Air and application quality features Electronically controlled needle valves + integrated flowmeters for real-time, precise air delivery. 💨✅ Adjustable electrification curve for different powders and demanding parts. ⚙️🧩 Non-stick, puncture-resistant nozzles resist electrical breakdown, reduce clogging, and simplify color changes. 🧼✨ Automatic gun purge (from handle or screen) for faster, cleaner color changes. 🔁💨 ### 🛡️ Safety and compliance Discharge energy below 2 mJ + antistatic hose with double grounding strap. ⚠️🔒 ATEX and EN 50050-2 compliant for potentially explosive areas. ✅ ### 🧠 Productivity and support Quick Program: fast switching via rapid trigger presses. ⚡🎛️ Visual wear counters + fault history, suggestions, and self-monitoring diagnostics. 👀🔧 Up to 8 languages: PL, EN, DE, FR, RU, ES, IT, SV. 🌍 Animated troubleshooter for guided diagnostics. 🧭 Professional mode (hints on/off) + daily and job statistics for order management. 📊⏱️✅

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 3,500 mm, total length: 7,050 mm, total width: 4,100 mm, volume flow: 36,000 m³/h, temperature: 80 °C, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), Equipment: cabin, lighting, Paint and Drying Booth It is the centerpiece of your entire painting operation: the combined paint and drying booth. Bcedpfsxa H Ewex Aafsu (Alternatively available as a separate paint booth with a dedicated dryer.) Our solutions feature full-surface ceiling filters and, optionally, full-surface floor extraction with drive-over grating or wall extraction at the position of your choice. If you wish to further increase the efficiency of the system beyond heat recovery and infinitely variable control via frequency converter, we can also offer you a sectional control system. This enables you, for example when doing spot repairs or partial booth loading (such as painting only add-on parts), to activate only the section where the parts are located. This allows you to operate with a reduced air volume, save energy, and minimize costs, all without compromising quality. Feel free to contact us – we would be happy to demonstrate these options in detail. Do you have any questions or suggestions? We are happy to assist you.

Condition: new, Year of construction: 2025, total height: 4,000 mm, total length: 7,000 mm, total width: 3,000 mm, warranty duration: 24 months, temperature: 80 °C, air demand: 36,000 m³/h, input voltage: 380 V, heating capacity: 345 kW (469.07 HP), power: 40 kW (54.38 HP), fuel: liquid petroleum gas (LPG), energy consumption: 40 kWh, insulation material: Mineralwolle, insulation thickness: 50 mm, nominal power: 345 kW (469.07 HP), Equipment: lighting, MAIN STANDARD Our paint booths are designed to meet all necessary requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. Booth processes are managed via a PLC system, ensuring that desired values are maintained consistently. OPERATING PRINCIPLES OF THE BOOTH The booth’s processes are managed through a control panel, which oversees the following steps: PAINTING PROCESS During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled through the extraction unit. Floor filters (paint stop filters) collect paint particles, and the air passes through final exhaust filters before being discharged. FLASH-OFF PROCESS After painting, the booth continues operating for approximately 15 minutes to purge residual solvents and thinners. During this phase, fresh air circulates from outside into the booth. DRYING PROCESS In this stage, 80% of the air passing through the booth is heated to 60°C and introduced via a distribution system. Since 20% of the solvent is released during drying, it is expelled with the exhaust air. Industrial coatings are typically dried at 60°C, but the booth temperature can be adjusted as needed via the control panel. COOLING PROCESS After the 30-minute drying cycle, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the subsequent 5-minute cooling phase, fresh air from outside circulates through the booth, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT These control panels govern the functions and operation of machines and devices housed within the booth. The panel is made of durable galvanized sheet and steel profiles and is fully enclosed to protect against dust and moisture. Electrical Equipment and Control Panel: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control connections between the control panel and motors or other electrical devices. • Electrical wiring is designed to accommodate booth relocation if needed. • Operating equipment uses 380 V 50 Hz, while control devices operate at 220 V. • The booth’s operation time can be monitored on the electronic control panel, enabling straightforward maintenance scheduling. • Temperature and time settings for booth ventilation (solvent flash-off), intermediate drying, and final drying can be easily adjusted to required values on the digital display of the electronic control panel. Bcedjwzmcbspfx Aafou • Users can monitor and adjust the drying time using the heating thermostat and time relay.

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 5,600 mm, total length: 11,200 mm, total width: 5,100 mm, type of input current: three-phase, warranty duration: 24 months, inner dimension height: 4,970 mm, inner dimension length: 11,000 mm, temperature: 80 °C, inner dimension width: 5,000 mm, air demand: 52,000 m³/h, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), power: 45 kW (61.18 HP), fuel: liquid petroleum gas (LPG), input frequency: 50 Hz, energy consumption: 45 kWh, insulation thickness: 50 mm, nominal power: 250 kW (339.91 HP), sheet thickness steel (max.): 2 mm, Equipment: lighting, * Air Preparation Unit: The air preparation unit is a recirculation system that supplies the cabin with filtered fresh air and exhausts used air during the painting process. It heats the air to 60 °C, mixes the used air with 10% fresh air via an automatic multi-damper system, and reheats the air before routing it back into the cabin. The air is heated using a burner and a heat exchanger, both made of high-quality 304 stainless steel and housed within the fresh air unit. During painting, the air is filtered twice (via front and ceiling filters) before it enters the cabin. The contaminated air is also filtered twice (through inlet and outlet filters) before it exits via the exhaust unit. Air preparation units are insulated like the side walls to minimize heat loss and are protected against potential vibration and noise thanks to rubber seals on the covers. The exhaust air is regulated by a damper in the outlet duct, which helps control the internal pressure of the cabin. * PRINCIPLES OF CABIN OPERATION: The processes in the cabin are controlled via a control panel that manages the following steps: * PAINTING PROCESS: During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled by the extraction unit. Floor filters (paint stops) capture paint particles, and the air passes through the final exhaust filters before being discharged. * FLASH-OFF PROCESS: After painting, the cabin operates for approximately 15 more minutes to purge residual solvents and thinners. During this phase, fresh air from outside continues to circulate in the cabin. * DRYING PROCESS: In this phase, 80% of the air passing through the cabin is heated to 60 °C and supplied to the cabin via a distributor. As 20% of the solvent is released during drying, these solvents are expelled with the exhaust air. Industrial coatings are typically dried at 60 °C, but the cabin temperature can be adjusted via the control panel as required. * COOLING PROCESS: After the 30-minute drying process, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the 5-minute cooling phase, fresh air from outside circulates in the cabin, after which the system stops automatically. Bodpfjwzl Hxjx Aafecu ELECTRICAL AND ELECTRONIC EQUIPMENT: These control panels manage the functions and operation of all machinery and devices inside the cabin. The control panel is constructed from durable galvanized sheet metal and steel profiles and is fully enclosed to protect against dust and moisture. Electrical devices and control panels: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control lines between the panel and motors or other electrical devices. • Electrical wiring is designed to allow for cabin relocation if necessary. • Operating devices use 380 V 50 Hz, while control devices use 220 V.

Condition: good (used), grinding drum, deflection drum, belt sander, belt grinder, drum sander, drum sander, conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers Bsdpsvxp Uvjfx Aafecu -Manufacturer: KED Kurt Ehemann, grinding drum drum width 640 mm -Drum: Ø 150 mm -Hole: Ø 72 mm -Quantity: 1x drum available -Dimensions:Ø 150 x 640 mm -Weight: 16.4 kg

Condition: good (used), grinding drum, deflection drum, belt sander, belt grinder, drum sander, drum sander, conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Manufacturer: KED Kurt Ehemann, grinding drum drum width 235 mm Bsdpfx Aevxqhdoafecu -Drum: Ø 320 mm -Hole: Ø 60 x 200 mm -Number: 4x drum available -Price: per piece -Dimensions: Ø 320 x 235 mm -Weight: 30.0 kg/piece

Condition: good (used), Grinding drum, deflection drum, belt grinder, belt sander, drum grinder, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Manufacturer: KED Kurt Ehemann, grinding drum drum width 150 mm -Drum: Ø 250 mm -Hole: Ø 40 mm -Quantity: 1x drum available -Dimensions: Ø 250 x 150 mm Bodpfxsvxgwue Aafecu -Weight: 15.4 kg

Condition: good (used), Conveyor belt rollers, transport rollers, roller motor, conveyor belt motor, drum motor, drive drum, motor roller, -Manufacturer: Ackrutat, drive drum drum motor -Type: unfortunately without type designation -Voltage: 380 V -Power: 0.36 kW -Speed: 22 m/min -Drum: Ø 126 mm -Drum length: 500 mm -Shaft: Recording dimensions see photo technical drawing -Total dimensions: Ø 126 x 610 mm -Weight: 23.1 kg Bcodottntvjpfx Aafou

Condition: used, Sanding drum (rubber air drum) Original product from KED, (Kurt Ehemann) -Type: G 15 x 20 -consisting of: -Base body, rubber hose, air valve, 2 clamping caps for rubber hose -Dimensions: -Diameter: 150 mm -Grinding length: 150 mm -Length of the body: 200 mm -Mounting hole: 30 mm -Number: 2x available -Price: per piece Available on request in other sizes: Bcjdpfx Ajb A S Rbeafju e.g. diameter 40mm, 60mm, 75mm, 100mm, 125mm, 150mm, 175mm, 200mm, 250mm, 300mm e.g. grinding length 100mm, 150mm, 200mm, 250mm, 300mm, 400mm, 500mm also available as a brush abrasive. Furthermore, we also carry general Ehemann spare parts. Price of grinding drums attached as PDF file

Condition: excellent (used), Motor roller, drum motor, belt sander, belt grinder -Spare part for: EHEMANN grinding machines -Drum: Ø 176 mm -Drum length: 430 mm -Speed: 2800 rpm -Power: 3 kW -Shaft mount: Ø 28 mm -other sizes also available in stock -Weight: 50 kg Bsdjb A I Ixspfx Aafecu

Condition: good (used), Motor roller, drum motor belt sander belt sander -Spare part for a grinding machine Bcjdpfjb A Nf Iox Aafsu -Drum: Ø 150 mm -Drum length: 170 mm -Speed: 2900 rpm -Power: 1.75 kW -Shaft mount: Ø mm -Number: 2x motors available -Price: per piece -other sizes also available in stock -Weight: 19.5 kg

Condition: good (used), Motor roller, roller motor, conveyor belt motor -Drum motor: for conveyor belt -Drum: Ø 102 mm -Drum length: 495 mm -Drum: rubberized -Groove: 18 mm Bcedpsb A Iqmofx Aafju -Shaft ends Ø 17 mm two-edge 13 mm

Condition: excellent (used), Grinding drum (rubber air drum) Original product of the company KED, (Kurt Ehemann) -Type: G 7.5 x 25 -consisting of: -Base body, rubber hose, air valve, 2 clamping caps for rubber hose Bcjdpfob A I Adjx Aafeu -Dimensions: -Diameter: 75 mm -Grinding length: 190 mm -Length of base body: 250 mm -Holding bore: 30 mm -Quantity: 4 available -Price: per piece -Weight: 1.1 kg Available in other sizes upon request: e.g. diameters 40 mm, 60 mm, 75 mm, 100 mm, 125 mm, 150 mm, 175 mm, 200 mm, 250 mm, 300 mm e.g. grinding length 100mm, 150mm, 200mm, 250mm, 300mm, 400mm, 500mm Also available as brush grinding elements. Furthermore, we also carry general husband-related spare parts. Price of grinding drums is shown in the attached PDF file.

Condition: good (used), grinding drum, deflection drum, belt sander, belt grinder, drum sander, drum sander, conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Manufacturer: KED Kurt Ehemann, grinding drum drum width 400 mm -Drum: Ø 100 mm -Hole: Ø 30 mm -Number: 3x drum available Bjdpfxjvxp N To Aafecu -Price: per piece -Dimensions: Ø 100 x 400 mm -Weight: 7.7 kg/piece