Used Packers for sale (223)

Condition: used, Year of construction: 2005, 6-head packer for 0.5 litre and 0.33 litre glass bottles: Krones Linapac II E35 LT1G Bottle holder: 6 x 20 or 6 x 24 bottles Additional title: Packing machine for bottle crates Performance: 50000 bottles/h Air consumption: 0,0002 m³ / bottle Power: 24,5 kW Voltage: 230/400 V Frequency: 50 Hz Length: 6160 mm Width: 4120 mm Height: 5033 mm Formats: 0.5 l glass bottle (D = 68.5 mm, H = 270 mm; Ale / Longneck), 0.33 l glass bottle (D = 61 mm, H = 238 mm; Ale / Longneck) Running direction: right -> left Operation / Control: PLC, control cabinet with touch panel Position: free standing Base construction: Square tube frame on dome feet Features: 1 basic machine (lifting mechanism, horizontal linear unit, gripper head carrier, movement axes), 2 gripper head sets (frame with 6 ring gripper heads, 20 (24) ring grippers each, pulling device, manual changing device, insertion frame, vibrator set, folding unit for completeness control, terminal strips for guide plate adjustment), shelf magazine (magazine locations with drive for automatic storage), container transport, container transport, safety device, electrical and pneumatic equipment Fjdpexbqldsfx Ah Hjgk Periphery: Buffer tables for empty and full boxes Layer patterns: 6 x 20 across, 6 x 24 across, 20 plastic crate (400 x 300 x 300 mm), 24 plastic boxes (400 x 300 x 270 mm),

Condition: used, Used end of line TMG up to 1200 box-hour Case Erector with Hot Glue Sealing Fodpjvgt N Tsfx Ah Hjgk Firstly, the TMG case erector features hot glue bottom sealing. It includes, notably, a Nordson glue heater. This allows for the formation and sealing of various carton sizes. Additionally, the machine has a painted iron frame. It also comes with safety protections. Importantly, it is capable of producing about 1200 cartons per hour. This equipment complies with CE standards as of 2018 and is provided with a manual. Consequently, this offers an efficient packaging solution. Case Packer with Mechanical Movement Moreover, the TMG case packer has a mechanical movement on axes. It’s designed for precision and adaptability. It can have, for example, two bottle grab heads (6+6) or one with 12 heads. This setup accommodates different bottle diameters. Furthermore, the entry bench is made from stainless steel, indicating a robust machine. With a rate of about 480 cycles per hour and equipped with safety protections, it adheres to 2018’s CE regulations. Case Sealer for Efficient Sealing of the End of line TMG Furthermore, the TMG case sealer ensures accurate top sealing with hot glue. It includes an automatic carton separator. A pneumatic piston operates the rear flap closure. It allows for manual adjustments for various carton sizes. Equally important, it achieves a rate of 1200 cartons per hour. This machine emphasizes sealing efficiency and reliability. With lateral safety protections, it meets the 2018 CE standards and is also provided with a manual, presenting an optimal solution for end-of-line operations. Conclusion of the End of line TMG Lastly, choosing “Used end of line TMG up to 1200 box-hour” machinery is strategic for enhancing packaging efficiency. Furthermore, the integration of a case erector, packer, and sealer meets not only safety standards but also offers operational flexibility. These machines are ideal for enterprises aiming to boost productivity and uphold high-quality benchmarks. In summary, TMG’s technology features comprehensive safety and operational efficiency, effectively addressing the demands of the bottling industry and ensuring top performance and reliability over the long term.

Condition: used, Year of construction: 2004, Used Case Packer Mas Pack 2004 Used Case Packer Model Accupack 3/6 from 2004 Packs 6 boxes of 6 bottles and 3 boxes of 12 bottles at a time Mechanical head unit movement Variable bottle gripping head for various bottle diameters Variable production speed with inverter Fjdpfx Ahjvgul Ns Hjgk Painted iron machine With safety features 10 formats of centerers x cartons Year of construction 2004 Production around 13,000 bottles/hour Machine in perfect working condition Used Case Packer Mas Pack year 2004. This machine is in excellent condition and is ready immediately for sale.

Condition: used, Year of construction: 2009, Used Acmi Case Packer 2009 Used Case Packing machine, manufactured by ACMI in 2009 complete with safeguards and user manuals. It reaches speeds of up to 8000 bottles an hour. Currently kept in storage. Fsdpfx Ahovgurpo Hegk Machinery kept in excellent condition and ready for sale.

Condition: used, Used Alfatek Complete Line for Wine 5000 BPH Manufacturer: ALFATEK Year: 2003 Speed (b / h): 5000 Formats: standard Bordolese – light truncated cone Bordeaux – heavy truncated cone Bordeaux – magnum 1,5L Rotation direction: Clockwise Accident prevention: Yes Manuals available: Yes Revisions Available: No Operating status: Function Bottled product: Wine Fgsdpfevguuksx Ah Hjk Number of Valves: 24 Fill type: Gravity Type of nozzle: Fixed Isobaric valve: No PLC type: Not Existing Spare parts available: No   Description of the used bottling line: Used Alfatek Complete Line for Wine 5000 BPH: 1) KOMPASS rinser with 16 spouts 2) Alfateck filler monobloc composed of 24 taps + 4 Arol capping heads (flush). There are 4 formats available: – standard Bordeaux – light truncated conical Bordeaux bottle – heavy truncated conical Bordeaux bottle – magnums 1,5L 3) Newtec glue labeling machine with two stations 4) APE carton former with Nordson gluer 5) APE case packer 6) taping machine

Condition: used, Used Case Packer MONDO & SCAGLIONE MI 2/3 up to 10000 bph This Used Case Packer  delivers high efficiency and, therefore, meets the demands of large-scale bottling operations. Mondo & Scaglione manufactured this machine, which remains in storage, ready for reinstallation and immediate use in production plants. Its technical specifications and safety features, as a result, ensure reliable and automated packaging. Technical Specifications of the Used Case Packer MONDO & SCAGLIONE MI 2/3 up to 10000 bph The Used Case Packer MONDO & SCAGLIONE MI 2/3 up to 10000 bph reaches operational speeds of up to 10000 bottles per hour (BPH). Consequently, this performance makes it perfect for high-volume production lines, where maintaining speed and operational continuity is crucial for efficient output. The machine includes 18 fixed heads, which ensure steady and consistent performance throughout the packaging process. It supports a 3 x 2 packaging format, which, in turn, optimizes packing bottles or containers into six-unit boxes. In addition, this format is highly adaptable to various production needs. Structure and Dimensions Fgjdpfx Aevgvi Nsh Hsk The machine’s dimensions—2900 mm in length, 1900 mm in width, and 2300 mm in height—allow easy installation in industrial spaces that meet safety standards. Moreover, the operator side sits on the right, facilitating manual intervention and streamlining maintenance tasks. As such, these features make the Used Case Packer MONDO & SCAGLIONE MI 2/3 up to 10000 bph user-friendly during control and monitoring. Furthermore, its compact design ensures that it fits within existing production lines without significant adjustments. Safety and Reliability This Case Packer  integrates a range of safety features that minimize operational risks. Physical protections and safety sensors actively ensure operator safety during operation. Therefore, these systems comply with industrial safety regulations, reducing the likelihood of accidents and ensuring uninterrupted production. Additionally, this attention to safety ensures the machine operates at optimal performance levels over time. Current Condition The Used Case Packer MONDO & SCAGLIONE MI 2/3 up to 10000 bph currently sits in storage, kept under optimal conditions, and remains ready for reinstallation in a production line. Before being activated, a thorough inspection will ensure that all components perform perfectly, particularly after any period of inactivity. As a result, this machine will integrate seamlessly into a new production environment with minimal downtime. Moreover, regular maintenance checks can further guarantee long-term operational efficiency. Applications and Usage This machine fits perfectly in plants requiring high automation levels and large-scale packaging capacity. The 3 x 2 format, combined with its 18 fixed heads, allows efficient packaging of bottles of various sizes and materials into six-unit boxes.

Condition: used, Used aseptic filling line Tetra Pak A3 FLEX 200S up to 7000 l/h The Used aseptic filling line Tetra Pak A3 FLEX 200S up to 7000 l/h provides an advanced solution for the aseptic bottling of dairy products and fruit juices. Consequently, this line fills 200 ml Slim Brick containers, ensuring high production efficiency and maintaining the sterility of the product throughout the entire packaging process. Line Features of the Used aseptic filling line Tetra Pak A3 FLEX The bottling line operates with a capacity of up to 7000 liters per hour, ensuring high standards of safety and quality. Furthermore, the aseptic system prevents bacterial contamination, making this solution ideal for packaging sensitive liquids. Additionally, the line includes a conveyor system that facilitates the smooth transfer of containers between different processing stages, ensuring an uninterrupted workflow. Machines Included in the Line Tetra Pak A3 FLEX 200 ml Slim Filler (year 2006) The Used aseptic filling line Tetra Pak A3 FLEX relies on the Tetra Pak A3 FLEX filler, which aseptically fills 200 ml Slim containers. Moreover, this machine utilizes an advanced sterilization system to guarantee the microbiological safety of the packaged product. The filling process ensures precision, thereby minimizing waste and maintaining accurate dosing. Tetra Pak Straw Applicator 22 (year 2009) The Tetra Pak Straw Applicator 22 automatically affixes straws to 200 ml Brick containers. As a result, its integration into the production line enables precise and fast application, improving the product’s ergonomics for the end consumer. Flow Management and Buffering: Tetra Pak Accumulator ACHX30-0500-47M (year 2010) Fodov Ew Iqepfx Ah Hjgk The ACHX30-0500-47M accumulator optimizes production flow by regulating container transport between different processing stages. In addition, this component ensures a continuous workflow, preventing interruptions and maintaining a consistent production rate even when downstream machinery operates at variable speeds. Tetra Pak Cardboard Packer 70 (year 2003) The Tetra Pak Cardboard Packer 70 packages Brick containers into transport cartons. Consequently, the automated system enables fast and efficient packaging, protecting units during transportation and facilitating distribution logistics. Aseptic Filling Process in the Used aseptic filling line Tetra Pak A3 FLEX The entire system performs aseptic filling, a technology that maintains product sterility without requiring refrigeration. Specifically, the process sterilizes the container before filling, preventing bacterial contamination and ensuring an extended shelf life. Safety and Compliance The Used aseptic filling line Tetra Pak A3 FLEX incorporates advanced safety systems to protect both operators and the product during processing. Additionally, each machine complies with the sanitary and hygiene regulations required by the food industry, ensuring safe production in line with international standards.

Condition: used, Year of construction: 1999, Used Case Packer Ape Inca 2001 Pack 2 Cartons Of 12 or 4 Cartons Of 6 Bottles Each Bar Movement Of The Mechanical Head Group The bottle gripping head is variable for various bottle diameters Variable Production Speed With Inverter Machine With Stainless Steel Frame And Fairing Used packer APE with Accident Prevention Protections Year Of Construction 1999 Production 8,000 bots. Now in 12 And 6 Cartons Used packer APE In Good Condition Machine in the state in which it is found working With Existing Formats Some specification: Used case packer APE Inca 2001 entirely in stainless steel, a machine of minimum encumbrance in terms of space and very mechanical, easy to use and very efficient for the type of work it is called upon to perform. The bottle inlet can be straight or angled 90 degrees with a motorized bend, so it can be adapted to any layout. the spare parts are easily available, the electronics are minimal and therefore also easily repairable in case of breakdowns. Used case packer APE Inca 2001 is a very appropriate model of the Veronese company, it combines quality, price and performance. On request, it is also possible to create various other bottle formats. Fjdovguinopfx Ah Hjgk Used packer APE disassembled perfectly functional and salable with pre-installation check to be done in our workshops. About installation: Thanks to our staff we are able to offer all the installation and start-up services of the machinery; in this case, we carry out a project together with the buyer to prepare for the arrival of the used machinery in his used bottling line. We can also prepare all the electrical connections to insert the used machinery into the existing automation. We include this project in the pre-installation machine service and it is designed to relieve the customer of any worries.  

Condition: used, Year of construction: 2007, Used Casepacking Monoblock Oma 2007 This machine is an OMA Monoblock composed of a case erector and case packer. Oma brand case erector with hot glue closure. Nordson glue heater. Vertical cardboard formation. Form 2 cartons of 6 or 1 of 12 with or without the hive inside Case packer with mechanical movement. Possibility of forming and packing various carton formats. Painted iron frame. Accident prevention protections. Production about 320 boxes of 12 and about 600 of 6. The machine is in accordance with CE 2007 with manuals. In excellent condition. Dimensions The machine is divided into 2 parts The first part forms and closes the bottom part of the cardboard with hot glue Front 2,500 mm. Width 2,100mm. Height 2,500mm. Weight about 700 kg. Fsdsvgumgepfx Ah Hjgk The second part for cartoning machine Front 2,000 mm. Width 1,900mm. Height 2,700mm. Weight about 900 kg.

Condition: used, Used Bottling Line KRONES for Glass Bottles up to 20000 bph Fgedpfx Asvgvwmeh Hsk Introduction to the Bottling Line KRONES Initially, the used KRONES bottling line for glass bottles is highly sought after in industrial settings due to its reliability and efficiency. Comprising a range of top-tier components, the Complete Bottling Line KRONES ensures seamless performance, effectively meeting the stringent demands of high-volume production. Main Components Firstly, the KRONES K-131-669 filling monoblock, manufactured in 2016, stands as the centerpiece of the Complete Bottling Line KRONES. Capable of handling a remarkable 20,000 bottles per hour, it is complemented by the 1998 KRONES 472-072 depalletizer and the 2000 Gronemeyer RINSER 8983-400-4. Consequently, this collective setup facilitates a smooth and uninterrupted workflow from bottle unloading to the filling process in the Complete Bottling Line KRONES. Quality Control of the Used Bottling Line KRONES Maintaining product quality is paramount in any bottling operation. Therefore, the 1999 KRONES CHECKMAT inspector plays a pivotal role in this regard in the Complete Bottling Line KRONES. With advanced functionalities encompassing not only level control but also meticulous label inspection, it ensures that every product meets the desired standards. Furthermore, the 2000 ACI TA20 2 AE bottle dryer guarantees that bottles are impeccably prepared for subsequent labeling and packaging stages, effectively eliminating any potential issues that may arise from moisture. Labeling and Packaging Efficient labeling and packaging are essential components of the KRONES bottling line. Consequently, the 1999 KRONES STARTMATIC K-080-669 excels in these areas. With precise label application capabilities, coupled with the ability to print directly onto glass bottles, it not only streamlines operations but also elevates brand presentation in the Used bottling line KRONES for glass bottles up to 20000 bph. Complementing this is the 1999 SMI SMI/7507 case packer and the 1997 FRANPACK Typ 121971214 pallet wrapper, ensuring that products are securely packaged and ready for distribution. Operational Status and Specifications The KRONES bottling line is in flawless working condition, and meets the demands of modern production environments. With a remarkable throughput of 20,000 bottles per hour, the line promises to enhance operational efficiency while maintaining product quality. Specifically designed for glass containers and primarily catering to beer production, it guarantees precise and consistent fills, ultimately resulting in superior product quality and customer satisfaction. In summary, the KRONES bottling line represents a sound investment for businesses seeking to optimize their bottling operations. With its robust construction, cutting-edge features, and proven track record, it is poised to deliver exceptional performance and elevate production standards to new heights.

Condition: used, Year of construction: 2006, operating hours: 6,800 h, Used Dimac Planet 45 WrapAround Packer 2006 This wrap around packer was produced by Dimac in 2006, and it is the model Planet 45. The machine is still in production with 6728 working hours. This used wraparound Dimac produces 45 packs per hour and processes various formats including bottles and cans. It has various spare parts available upon request. It is complete with user manuals and safety features in accordance with the law. The used Dimac Planet 48 Wrap Around Packer 2006 is in excellent condition and ready for sale. Technical specification: The Used Dimac Planet 45 WrapAround Packer has straight inlet with a bottle sorter at the inlet. We have 22 formats available inserted into the machine. The operator side is on the right side of the you want it can also be changed without any particular problems. If you need ribbons we can also sell those separately; You just need to have a layout to check their feasibility, we have many ribbons available. Fjdevgvy Ijpfx Ah Hjgk Dimac used wraparound overhaul services: We also provide assistance and maintenance services for used wraparound Dimac and Robopack machinery in general automation of the Athena group company. We carry out disassembly and assembly with our technical team anywhere in the world. In the case of overhauls, the delivery time is only affected by the delivery of the electrical parts. We also carry out audits in your company, it is necessary to first carry out an inspection to verify its feasibility. In the case of this machine which has a few working hours, delivery is immediate as it is in excellent condition. Contact us for a quote or an inspection, we can move, disassemble, reassemble entire bottling plants. We carry out an inspection by our staff or through your layout and video/photos of your system.    

Condition: used, operating hours: 31,000 h, Kosme Used Complete Bottling Line for Juice and Milk 2006 If you are looking for a complete bottling line for your dairy or juice products, look no further than the Kosme Used Complete Bottling Line for Milk 2006. This high-quality bottling line was previously used by Kosme to bottle milk in 2006 and features state-of-the-art equipment from leading manufacturers like Kosme, Krones, and Mariani. It can also be used to bottle edible oil in PET with neck 38, this is because the filling system is by weight and therefore allows you to have this possibility. At the filler output, there is a weight control system which guarantees the correctness of the filling. The Kosme Used Complete Bottling Line for Milk runs clockwise and includes a preform tipper and preform orientation/elevator for efficient preform handling. The line also features a KOSME KSB 4L blow molding machine that can handle 1LT and 1.5LT containers and comes with air conveyors for improved production efficiency. In addition, the Kosme Used Complete Bottling Line for Milk includes a KOSME 16.8 filling monoblock that features a 16-valve filler for filling by weight, ensuring accurate filling and consistent product quality. The 8-head capper for plastic pre-threaded caps with a pneumatic cap lifter ensures efficient capping, while the KRONES roll-fed labeller with either 10 heads (depending on your needs) allows for high-speed labelling. Fsdpfx Ajvgui Ijh Hsgk Equipment of the used line The MARIANI case packer is also included in the Kosme Used Complete Bottling Line for Milk, which provides efficient packing and easy handling of finished products. Bottle/crate conveyor belts and a case palletizer are also included in the line, making it easy to move the products along the production line. The used bottling line is designed to handle PET containers and can handle dairy and juice products in 0.50 L and 1.0 L formats. With a production capacity of 6000 bottles per hour, this used bottling line is a highly efficient and cost-effective solution for any beverage production facility. In summary, the Kosme Used Complete Bottling Line for Milk 2006 is an excellent choice for any dairy or juice product manufacturer looking to streamline their production process and increase efficiency. With its high-quality equipment from leading manufacturers, this bottling line ensures consistent product quality and high-speed production, all while minimizing downtime and maximizing profits.

Condition: used, Year of construction: 1996, Used Case packing Monoblock brand Oma YOM 1996  – 2005 bph Monoblock Oma Brand components: Case erector with single-head packer It can make a case of 6 or a case of 12 bottles. Safeguards. Painted iron frame. There are various formats. Manufacturing year of the case packing triblock 1996. Production is about 450 cases per hour of 6 bottles. There is no taping machine at the output of the case packing tri-block to seal the upper and, lower part of the case. Thus, motors must be used on case exit belts. The case can then go to the taping machine to be closed from the bottom and top. The taping machine must have a flap system; that foresees the pre-folding of the upper flaps to carry out a correct closure of the case. On request, we can create a correct layout customized to the needs of the buyer. Fodpevguuqofx Ah Hogk

Condition: used, Year of construction: 2004, Used case packer APE INCA 2000 year 2004 The APE Impianti INCA 2000 bottling machine optimizes filling processes in the bottling sector. It provides high performance and adapts to various production needs. APE Impianti manufactured the INCA 2000 model in 2004 with a focus on robustness and reliability. Its full stainless steel construction also ensures corrosion resistance, delivering long-lasting durability in high-demand environments. Capacity and Operating Speed of the Case Packer APE INCA 2000 The INCA 2000 operates at a rate of 6000 bottles per hour. It maintains high-speed standards without compromising filling accuracy. This capacity meets the demands of intensive bottling lines, improving production flow. Additionally, it minimizes machine downtime. Companies needing high daily volumes gain a particular advantage from this speed. Fgsdpfx Ahevgvdyo Hjk Container Specifications The APE Impianti INCA 2000 bottling machine works with glass containers. This compatibility ensures both stability and durability during the bottling process. It supports 0.75- and 0.375-liter bottles, adding versatility for different product lines. Its precision meets the beverage sector’s standards, where filling uniformity and container integrity are crucial. Head Configuration and Structure The machine uses 12  heads, which provide stability and consistency. The heads are arranged in two sets of 6 or one set of 12. This flexible configuration optimizes flow based on specific production needs. The modular structure also allows easy maintenance and replacement of heads without reducing productivity. Operational Orientation The operator side is located on the left, making control straightforward during monitoring and adjustment. This layout enables easy access to key components during routine operations and maintenance. The left-side position reduces intervention times and increases operator safety. Construction Material and Durability The INCA 2000’s stainless steel structure provides resistance to corrosion and offers structural stability. This feature also ensures hygienic safety, crucial in the food industry. Stainless steel minimizes the need for extraordinary interventions, which adds maintenance value and longevity. This choice of material meets the mechanical and chemical resistance required for intensive production. Conclusion of the Case Packer APE INCA 2000 The APE Impianti INCA 2000 bottling machine offers both efficiency and durability. It provides a speed of 6000 bottles per hour, compatibility with different glass formats, and a modular head structure. These features meet the challenges of modern bottling lines. Its stainless steel construction and ergonomic layout deliver efficiency, precision, and durability. For companies focused on quality and productivity, this machine is a valuable investment.

Condition: used, Used filling line for beer in cans 25000 cph The used filling line for beer in cans 25000 cph delivers high-speed beer canning across multiple formats. Specifically, it fills 500 ml, 440 ml, and 330 ml cans with standard 202 lids, consistently reaching a capacity of 25,000 cans per hour. Although the line remains installed, it is currently not operational. Nevertheless, all components remain in excellent working condition. Empty can feeding system To begin with, a Linker DPG-500 depalletizer, built in 2012, unloads empty cans at the start of the line. Subsequently, rope conveyors from Linker (model RC/KHS, 2012) transport the cans to a Triplexrinser TR/KHS rinser, also from 2012. In this section, the system moves cans smoothly and prepares them efficiently for the next stage. As a result, the line ensures gentle handling while maintaining productivity. Filling and seaming Next, the KHS Innofill DVD 60 filler, installed in 2017, performs the filling process using 60 dedicated valves. In parallel, a Ferrum F08 seamer seals the cans, while an NSM 30A lid feeder supplies lids with precision. Consequently, this configuration ensures accurate dosing and secure sealing at high throughput. Notably, the filling and seaming block is among the most recent upgrades to the line. Fsdjw Ahfaspfx Ah Hjgk Pasteurization and quality control After sealing, the product passes through a KHS Innopro KZE flash pasteurizer, installed in 2017. Additionally, this unit includes a 5000-liter buffer tank to stabilize the process. Meanwhile, a KHS Innocheck fill level inspector (2012) continuously monitors the liquid level in each can. In doing so, it guarantees compliance with rigorous quality standards. Therefore, the pasteurization and inspection phases preserve both safety and consistency. Secondary packaging and handle application Once the cans are processed, a KHS Innopack Kisters SP 050 B2 multipack packer (2012) wraps them using shrink film—either printed or transparent. It operates on a double-lane system at 50 cycles per minute. Moreover, a KHS CSM 050-02 handle applicator (2011) applies handles at the same speed, which facilitates later transport. In other words, the secondary packaging setup optimizes the line for retail and logistics needs. Tray packing and shrink wrapping Following multipacking, the line uses a KHS Innopack Kisters TP 035 B2 tray packer (2012) to place packs into trays at 35 cycles per minute. Then, a KHS Innopack Kisters FS-AL shrink wrapper (2017) applies shrink film to stabilize the load. Thus, the packs remain secure and compact throughout distribution. Furthermore, both machines maintain high reliability under continuous operation. Palletizing and end-of-line operations At the end of the line, a KHS Innopal MPH 1-1 palletizer (2012) stacks trays without using interlayers. This simplifies the palletizing process while saving materials. Subsequently, a Fiat MFP pallet wrapper (2017) secures the stacked trays with stretch film.

Condition: used, Year of construction: 2003, Used Wrap Around Packer BAUMER EUROPEA 510 Plexiglass Protection of the Wrap Around Baumer Europea 510 Within the bottling industry, paramount attention is given to operator safety. The Used Wrap Around Baumer Europea 510 with Divider Cosmopack is equipped with plexiglass shields, providing a secure work environment. Moreover, this feature significantly enhances safety conditions, reducing potential hazards.  Electrical System Adhering to CEE Standards Fgsdpfxsvgt Tlj Ah Hok The electrical system meticulously adheres to stringent CEE regulations. Consequently, this guarantees the machinery’s reliable and safe operation, in strict alignment with industry standards. Furthermore, this compliance ensures optimal performance and minimizes the risk of electrical malfunctions. Achieving a Remarkable Production Speed of Up to 30 Cartons per Minute An impressive feature of this machinery is its ability to achieve a remarkable production speed. Specifically, it can reach up to 30 cartons per minute. This remarkable speed facilitates a consistently high work rate, promoting efficient production.  Technical Specificationsof the Wrap Around Baumer Europea 510 The correct operation of the machinery necessitates specific electrical power requirements. Specifically, a voltage of 380V at 50Hz, incorporating three-phase, Neutral, and Ground connections, is essential. Additionally, a 24V auxiliary voltage is provided to support the machinery’s component operation. Moreover, these detailed technical specifications guarantee precise power supply and compatibility. Installation Power of 27 Kw Guarantees Reliable Performance An impressive feature of this machinery is its substantial installed power capacity. In fact, it boasts an installed power rating of 27 Kw. This notable power capacity ensures that the machinery can efficiently handle the most demanding workloads. Consequently, this translates into consistently dependable performance. Maintaining Operational Stability with a Dynamic Pressure of 6 Bar To ensure operational stability throughout the bottling process, the machinery maintains a dynamic pressure of 6 bar. This critical feature substantially contributes to high-quality results. Additionally, it promotes a consistent and reliable workflow, minimizing potential disruptions. Tailoring Your Machinery with Customizable Operator Side Configuration The Used Wrap Around Baumer Europea 510 with Divider Cosmopack offers a high degree of flexibility. Specifically, it allows for the configuration of the operator side, which can be positioned either on the right or left. This remarkable feature empowers customers to tailor the machinery to their unique production facility requirements. Consequently, it underscores the machinery’s adaptability and suitability for various operational settings. It is imperative that customers communicate their preferred operator side configuration when making their purchase, as this customization greatly enhances the machinery’s usability and integration into existing workflows.

Condition: used, Year of construction: 2014, Used Automatic Wrap Around Packer Vanta 2100 bph Introductionof the Wrap Around Packer Vanta Initially, the used Vanta 2100 bph automatic wrap around packer marks a significant innovation in the bottling sector. Specifically designed to accommodate various container types like cans, glass bottles, and PET bottles, this machine exemplifies efficiency and precision in packaging. Product Types and Scope of Application Notably versatile, the Vanta 2100 bph adeptly adapts to different product sizes and types. It can manage cans, glass, and PET bottles, with diameters ranging from 50 to 110mm and heights from 70 to 370mm. Moreover, its capacity extends to the packaging size, crosswise to the conveyor direction from 140 to 450mm, and forward from 200 to 450mm. Additionally, the range for corrugated board sizes is expansive, horizontally to the conveying direction from 210 to 1500mm, and frontally from 280 to 700mm. Technical Specifications Functionally, the machine operates with a three-phase voltage of 380V and a frequency of 50 Hz. Its power consumption is a modest 13 KW, while control is efficiently maintained at 24VDC. Regarding air usage, it’s a critical aspect, with a consumption of 110L/min at 0.6MPa and 6.7 m3/h. Weighing 7000 Kg, it conforms to noise regulations, maintaining a level within 85 dB. Positioning and Feeding For carton feeding, the setup is straightforward, ensuring a consistent and smooth material flow. This feature is crucial for maintaining efficiency and reducing downtime, assuring that each packaging phase is seamless and uninterrupted. Conclusionof the Wrap Around Packer Vanta Fedpfx Ajvgt Troh Hjgk In summary, the Used Automatic Wrap Around Packer Vanta 2100 bph stands as an optimal solution for the packaging of cans, glass, and PET bottles. With advanced technical specifications and the ability to handle diverse product and packaging sizes, this machine offers unmatched value in the bottling industry, blending versatility, efficiency, and precision into one comprehensive tool.

Condition: used, Year of construction: 2005, operating hours: 25,000 h, Used Case Packer MAS PACK Accupack 3/6 year 2005 The Used Case Packer MAS PACK Accupack 3/6 year 2005 packs bottles into cases with precision and efficiency. Moreover, MAS PACK manufactured this model in 2005 to meet the needs of high-capacity bottling lines. Consequently, it delivers reliability and flexibility, making it an excellent choice for companies that prioritize speed and accuracy. Technical Specifications and Operational Capacity Fgsdovgu Ukopfx Ah Hsk The Case Packer MAS PACK Accupack 3/6 processes up to 12,000 bottles per hour. Furthermore, it handles glass containers efficiently and accommodates formats of 0.375 liters, 0.75 liters, and 1.5 liters. In addition, the machine’s fixed head and left-side operator setup improve access and streamline operations, enabling smooth packaging processes. Working Configurations of the Case Packer MAS PACK This case packer supports two main configurations. Specifically, it processes four cases of six bottles each or two cases of twelve bottles. Therefore, these options allow operators to adapt the machine to different production requirements and optimize performance without sacrificing speed. Additionally, the flexibility in configurations ensures it meets a wide range of operational demands. Materials and Versatility MAS PACK designed the Accupack 3/6 to maintain consistent performance over time. For example, the system stabilizes glass bottles during the packing process and minimizes the risk of damage. Likewise, its ability to switch between multiple formats without complex adjustments increases its versatility and value for production lines. Consequently, it remains a practical choice for industries with varied production needs. Ideal Applications The machine supports companies that package standard glass bottle formats, such as those in the wine, spirits, and premium water industries. Moreover, its high production speed enables efficient operation on bottling lines with demanding throughput requirements. Notably, by ensuring careful handling of glass containers, it maintains the quality of packaged products. Similarly, the machine’s adaptability helps businesses maximize output and minimize errors. Technical Conclusions of the Case Packer MAS PACK The Used Case Packer MAS PACK Accupack 3/6 year 2005 enhances productivity and flexibility for glass bottle packaging. Additionally, it reaches speeds of 12,000 bottles per hour and works with diverse case configurations to meet varying production goals. Furthermore, its compact design and operator-friendly layout save space while maintaining high performance. Consequently, it serves as a reliable asset for modern bottling operations.

Condition: used, operating hours: 11,000 h, Used SIDEL Bottling Line for Still Water up to 54000 Bottles per Hour Introduction of the Used bottling Line SIDEL for still water up to 54000 bph The used SIDEL bottling line for still water up to 54000 bottles per hour is currently built in 2014 operational and offers high performance. Specifically designed to package still water in 0.5 liter PET bottles, this line meets the needs of large scale production. Moreover, the Sidel water line reaches a production speed of 54000 bottles per hour, thereby optimizing operational efficiency for high quality products. Filling Technology and Bottle Specifications This Sidel water line employs gravity filling technology with light depression, ensuring precise and consistent dosing of the product. Additionally, the bottle neck type is the standard 30. or 25, which is common in the bottling industry. Having operated for a total of 10000 hours, the line has demonstrated reliability and robustness over time. With 24 blowing cavities and 84 filling nozzles, it significantly increases production capacity. Main Components of the Line At the core is the 2014 SIDEL Combi SBO24 Matrix system, which combines blowing, filling, and capping functions in a compact unit. Configured with 24 blowing cavities and 84 filling nozzles, it optimizes productivity, allowing the used SIDEL bottling line for still water up to 54000 bottles per hour to operate at full capacity. Cleaning and Preparation Systems Furthermore, the CIP system provided by Beijing Sanyuan of the Sidel water line ensures automated cleaning of parts in contact with the product, which is essential for maintaining hygienic standards in bottling still water. The SH Yiwei bottle dryer removes residual moisture, thus preparing the bottles for subsequent stages. Together, these components contribute to the overall efficiency of the line. Fgsdpfxjvgvcpe Ah Hok Marking and Quality Control A DOMINO laser bottle printer allows direct marking on the bottles with clear and indelible information. Haifu inspectors control the filling level and verify correct label application, thereby ensuring the quality of the final product. Consequently, the used SIDEL bottling line for still water up to 54000 bottles per hour maintains high quality standards. Labeling and Traceability of the Used bottling Line SIDEL for still water up to 54000 bph Moreover, the 2014 SIDEL ROLLQUATTRO labeling machine uses roll fed labeling technology, allowing rapid and precise label application. An additional DOMINO printer prints on cartons, providing necessary codes and information for logistics and traceability. As a result, this setup makes the Sidel water line a complete solution for the entire packaging process. Packaging and Weighing Systems An OCME case packer automates the packing of bottles into boxes for this Sidel water line. Additionally, the SARTORIUS scale provides accurate weight measurements, which are essential for quality control.

Condition: used, operating hours: 38,750 h, Used Tetra Pak filling line TBA 19 200ML Slim 10V year 2003 The bottling line featuring the 2003 Tetra Pak TBA 19 200ML Slim 10V is an advanced system tailored specifically for the juice and dairy packaging industry. Main Machinery of the Tetra Pak TBA 19 Line In fact, at the core of the bottling line lies the Tetra Pak TBA 19 machine. Engineered to handle Brik containers with precision, with a volume of 0.20 L, it operates at a capacity of 7500 bottles per hour (BPH), ensuring efficient and continuous production. Aseptic Filling System Positively one of the distinguishing features of this line is its aseptic filling system. This ensures surely that the product is bottled under optimal hygienic conditions, thereby maintaining freshness and quality. Accessories and Additional Components In addition to the main machinery, the bottling line Tetra Pak TBA 19 is equipped with various accessories and additional components to optimize the production process: Straw Applicator: Designed to apply straws to the packages, thereby facilitating consumer consumption. Therefore the included version is compatible with the U Type Straw standard and powered at 200v. Cardboard Packer: Responsible for the final packaging of products. The TCBP 70 version is designed certainly to create specific packaging schemes, with a configuration of 3×9 and a right-side feed. Conveyors and Trolleys: To streamline workflow within the production line, conveyors and trolleys for paper and related materials transport are included. Conditions and Maintenance Fgsdpfx Ahjvgvt Ij Hsk Despite being a used machine, the Used Tetra Pak TBA 19 200ML Slim 10V year 2003 has been maintained in excellent condition. All components have undergone regular preventive maintenance to ensure optimal performance and reliability in the long term. The line will be revised. Conclusion of the Tetra Pak TBA 19 Line In conclusion, the bottling line featuring the 2003 Tetra Pak TBA 19 200ML Slim 10V is an ideal investment for companies in the food industry seeking an efficient and reliable solution for packaging juices and dairy products. With a combination of high performance, advanced technology, and regular maintenance, this line offers an excellent opportunity to optimize production and ensure the quality of the final product.

Condition: used, Year of construction: 2007, Used Case Packer Apsol MCP2 3500 bph General Features of the Used Case Packer Apsol MCP2 3500 bph APSOL built the Used Case Packer Apsol MCP2 3500 bph in 2007 as an automatic case packing machine for glass bottles. This model ensures reliable operation and supports a wide range of packaging configurations. Consequently, high-efficiency bottling lines can easily integrate this unit, as it remains fully operational and ready for use. In addition, its compact design allows manufacturers to optimize floor space without compromising performance. Performance and Format Configuration The Used Case Packer Apsol MCP2 3500 bph processes up to 3500 bottles per hour, maintaining consistent output even under demanding production schedules. Specifically, it handles bottles in 0.50 L, 0.75 L, and 1 L formats, packed in 4×3 and 3×2 case layouts. Therefore, operators can switch between formats with minimal downtime. As a result, the machine offers remarkable flexibility for producers of wine, oil, and other glass-bottled liquids. Moreover, the system supports both small and medium production batches, which adds to its versatility. Gripping System and Number of Heads The gripping system uses bell-shaped suction heads with air chambers, which apply pneumatic pressure to move glass containers gently. This way, the machine prevents damage during the pick-and-place process. Notably, it features two gripping heads operating in parallel, which significantly increases throughput. Additionally, the dual-head system distributes workload evenly, thereby enhancing mechanical longevity. In particular, this setup proves effective when handling fragile or tall bottles. Automation and Control System OMRON and TOSHIBA programmable logic controllers (PLCs) control the Used Case Packer Apsol MCP2 3500 bph, ensuring high automation reliability and ease of maintenance. Furthermore, technicians can quickly configure parameters thanks to the intuitive interface. Because of this, the machine adapts smoothly to diverse production scenarios. Operators access the control interface on the right-hand side, which improves ergonomics and reduces operational fatigue. Equally important, the PLC architecture allows remote diagnostics and rapid intervention in case of faults. Fgedpowimnajfx Ah Hok Safety, Dimensions, and Power Supply The machine includes safety guards that comply with European regulations, thus ensuring operator protection. To illustrate, it features interlocked doors and emergency stop systems. It measures 3000 mm in length, 2400 mm in depth, and 2500 mm in height. In terms of energy, the unit operates on a 400 V, 50 Hz power supply and consumes 11 kW. Altogether, these features make the Used Case Packer Apsol MCP2 3500 bph a robust and scalable choice for mid-to-high-capacity bottling lines. Ultimately, the model combines mechanical reliability with flexible automation, making it a strategic investment for modern facilities.

Condition: used, Used aseptic filling line Tetra Pak A3 FLEX 1000SQ 7000 l/h Fgedpfxjwkux Ns Ah Hok General description of the line The Used aseptic filling line Tetra Pak A3 FLEX 1000SQ 7000 l/h provides an industrial configuration specifically designed for the sterile filling of liquid food products. It particularly suits sensitive items such as UHT milk and fruit juices, which require controlled processing environments. Moreover, the system operates with 1-liter square containers and reaches a production capacity of 7,000 liters per hour. As a result, it ensures high microbiological quality standards. In this configuration, each machine plays a critical role in maintaining aseptic conditions from filling to final packaging. Aseptic filler Tetra Pak A3 FLEX At the heart of the Used aseptic filling line Tetra Pak A3 FLEX 1000SQ 7000 l/h, the Tetra Pak A3 FLEX filler (version 100V), manufactured in 2004, performs aseptic filling using an integrated sterilization system, microbial barrier, and precise dosing mechanisms. Consequently, it processes pasteurized or sterilized products intended for extended shelf life and keeps them intact without requiring refrigeration. Furthermore, the filler maintains a sterile environment throughout the entire cycle. In addition, it ensures consistent product dosing and eliminates variability in filling performance. As a result, manufacturers can rely on this equipment to meet strict food safety requirements. Aseptic capper Tetra Pak TCA88 The line also includes the Tetra Pak TCA88 capper, built in 2006. This module applies plastic caps to filled containers using induction or mechanical systems that ensure hermetic sealing in an aseptic environment. Moreover, the capper synchronizes precisely with the filler to ensure uninterrupted operation. In contrast to conventional systems, this integration significantly reduces the risk of contamination after filling. In the same way, the TCA88 includes built-in quality control functions that verify each cap’s position and torque. Meanwhile, Tetra Pak designed the unit with safety features such as interlocked guards and error monitoring systems, ensuring full compliance with industry standards. Cardboard packer TCBP70 in this used aseptic filling line Tetra Pak The Tetra Pak TCBP70 packer, manufactured in 2007, manages secondary packaging. This automatic system forms and fills corrugated cartons using wrap-around or preformed box configurations. Similarly, it operates with fully electronic controls that allow real-time adjustment and monitoring. Therefore, the machine supports flexible packaging layouts and rapid format changes. In addition, the TCBP70 includes safety systems such as light curtains and emergency stop devices. For example, if an operator enters the guarded zone, the system halts automatically to prevent accidents. As a result, the packaging process remains both efficient and secure. Industrial applications and operational benefits The Used aseptic filling line Tetra Pak A3 FLEX 1000SQ 7000 l/h targets producers in the dairy and beverage industries who require aseptic packaging capabilities.

Condition: used, operating hours: 4,800 h, Used SIG Combibloc – like new Aseptic line for dairy and juice – advanced technical configuration The used SIG Combibloc processes dairy products and juices in 65 ml, 125 ml, and 200 ml formats. Notably, the line achieves a nominal output of 26,500 packs per hour. Furthermore, the manufacturer has fully packed the line for immediate shipment, and it has only completed 4800 working hours. It is in near-new condition. Therefore, this line presents an excellent opportunity for rapid deployment. Fsdpswc Ucrofx Ah Hegk Sterilization and aseptic filling system The line features a hydrogen peroxide (H₂O₂) supply and concentration control system, installed in 2023. This unit plays a crucial role: it sterilizes the carton packs before filling, ensuring that aseptic conditions are met according to the strictest standards. Immediately following sterilization, the process continues with the SIG Combibloc CFA 1224 aseptic filling machine, also installed in 2023. This machine includes all original accessories. In 2024, the operator added a conversion kit, which significantly increases the filler’s speed while still maintaining sterility and reliability. As a result, the line performs at higher throughput without sacrificing safety. These two modules together form the technical core of the Used line like new brand SIG Combibloc. Consequently, they deliver consistent, controlled, and efficient operation across multiple formats. Accessory application and primary packaging After filling, the system proceeds to the Geyssel 533 automatic straw applicator (2023), which applies straws to the packs. This function is especially important for consumer-oriented formats, particularly those designed for children or on-the-go consumption. Next, the line transfers products to the Meurer tray packer for SIG formats (2023). This machine groups the filled packs into stable trays for handling and distribution. Subsequently, the process reaches the HTW450 double stacker tray packer by SIG Combibloc, installed in 2024, which stacks trays in two levels. Thanks to this configuration, the system maximizes storage efficiency and simplifies palletizing. Altogether, these machines ensure smooth downstream flow, as well as effective primary and secondary packaging. Flow management and conveying In addition, the line includes a Meurer HSP 4 – S KF accumulator (2023), which regulates product flow between modules and prevents bottlenecks. This feature proves essential during high-speed operations or brief downstream interruptions. Likewise, the Meurer conveyor system (2023) transfers packs smoothly between each station. Since all modules are synchronized, the line operates without unplanned downtime. Moreover, this modular architecture allows for future upgrades if production requirements increase. Technical conclusion of the Used line like new brand SIG Combibloc In summary, the Used line like new brand SIG Combibloc offers a comprehensive aseptic packaging solution for both dairy and juice products.

Condition: used, operating hours: 30,000 h, Used CFT can filling line for soft drinks – 12,000 cans per hour Introduction and Production Capacity The Used CFT can filling line for soft drinks – 12,000 cans per hour delivers a complete solution for filling carbonated beverages in aluminum cans. CFT designed the line in 2017 and configured it to handle two Slim formats, which are commonly used in the soft drink industry. Specifically, the system processes up to 12,000 cans per hour, meeting the output requirements of medium-scale industrial facilities. As of 30/06/2025, the owner will release the line for sale. Therefore, this represents a valuable opportunity for facilities seeking to expand their production capacity. Depalletizing and Initial Inspection Fgjdpewr T Ewsfx Ah Hsk Initially, the CFT depalletizer automatically separates empty cans and feeds them into the production flow. Then, a HEUFT inspection unit checks each container for visual defects and dimensional non-conformities. As a result, the system ensures that only clean, undamaged cans move forward for rinsing. In addition, this early inspection step reduces the risk of line stoppages later in the process. Can Conveyance and Rinsing Next, CFT cable conveyors transport the accepted cans to a dual-channel rinser. The CFT rinser cleans the interior of each can using pressurized water jets or sterile air. Consequently, the machine maintains hygiene standards in line with food and beverage regulations. Moreover, the dual-channel configuration improves throughput while reducing contamination risks. Notably, this section plays a key role in maintaining microbiological safety. Filling After rinsing, a CFT monoblock handles the filling and seaming stages with 12 filling valves and 4 seaming heads. The machine processes cans of 150 ml and 330 ml efficiently. It also controls pressure and temperature precisely to prevent CO₂ loss during the filling of carbonated soft drinks. Furthermore, this phase supports both performance and product integrity. In effect, it ensures consistent quality in high-speed conditions. Full Can Inspection and Rejection Following the filling stage, another HEUFT unit inspects the filled cans to verify fill levels, seal integrity, and the absence of leaks. When it detects non-compliant cans, an automated HEUFT rejection module removes them from the line. As such, this step protects the quality of downstream operations. Additionally, it avoids the unnecessary packaging of defective units. Overall, the system minimizes waste and downtime. Conveyance and Packaging Subsequently, CFT conveyors move the approved cans to an SMI shrink wrap packer. The packer forms bundles in several formats: 4×3 (12 cans), 6×4 (24 cans), and 2x2x3 (12 cans). In this way, the flexible configuration supports various packaging and distribution strategies. Besides improving logistics, this packaging versatility allows rapid changeovers between product sizes.

Condition: used, Year of construction: 2000, Used Case Packer Ape year 2000 Builder: Ape Model: 1200 Fgjdpfx Ahjvgunqo Hok Year: 2000 Speed: 3600 bph Formats: 2×6, 1×12, from 0.375 to 0.750 American cartoon Left to right direction, reversible Used until 2020