Used Optiflex B for sale (38,991)

Condition: excellent (used), Year of construction: 2001, For sale are operational and very well-maintained dual-fuel oil/gas burners of the brand Weishaupt RGL40/1-B (2550 kW), including gas valve Dungs DN 65, year of manufacture 2001, with control cabinet. Cgodswgk Raspfx Abbon

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: Inv.119140, total length: 26,000 mm, total width: 9,000 mm, Equipment: cabin, lighting, 1 used painting line, featuring circulating conveyor belt, manual spray booth for sample coating, automatic spray booth equipped with robot and workpiece rotary holder, reverse osmosis system for DI water, paint preparation, and exhaust air treatment system. The system operates two shifts in serial production. Manual loading and unloading onto a conveyor belt; otherwise fully automatic. 18.7.25: Update: Dismantling is to be carried out from September 2025 on-site in Lohr by the buyer. The buyer is responsible for all costs related to dismantling, packaging, collection, and transport to their own facility (FCA terms). The area must be vacated no later than mid-January 2026 for installation of new production machines. For further details, see attached handout/flyer. Due to the significant effort required for dismantling, early and thorough planning with the disassembly company is essential, as is prompt contact or a visit to the site. Additional information is provided in the attached handout. --- 1 used painting line, with circulating conveyor, manual paint booth for samples, automatic paint booth with robot and workpiece rotary fixture, reverse osmosis system for DI-water, paint preparation, exhaust air treatment. Info in English, French, Spanish available upon request. --- Please indicate your offer price. Sale only within the EU, Switzerland, Turkey, and United Kingdom. Dismantling to be performed by the buyer. --- No packaging; all warranty rights are excluded. Cjdjwqg Iispfx Abbsgn Should you wish to dismantle the system yourselves, please indicate this in your offer. We do not guarantee the accuracy of technical data, completeness of accessories and tools, or compliance with all safety and environmental regulations as per accident prevention guidelines.

Condition: good (used), The following components from B&R Automation are for sale: - Power Panel 120 - CPU CP476 Cgedpfx Abjrt T Awobon Both were removed in 08/2022 and have worked without any problems to date.

Condition: reconditioned (used), TILT-DOWN PLATES FOR BROOKS W= 39 cm L= 59 cm H= 4.5 cm Openwork Stackable approx. 260 pieces available Codpfxsgh Hu Uo Abbegn for further questions please contact me

Condition: good (used), Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve, directional control valve -Solenoid valve -Type: MEH-5/2-1/8-B -Series: V402 -PN: 2.5-8 bar -Number: 5 valves available -Price: per piece Codpob A H Hpofx Abbogn -Weight: 0.3 kg

Year of construction: 2025, condition: new, Dimensions (L/W/H) 0x0x0 mm Weight 35 kg Total power requirement 0 kw Cedpfx Aovz Hu Sjbbsgn

Condition: used, Connection rating: 750 W // 400 V // 50 Hz Drilling capacity: 25 mm Spindle mount: MK 2 Cgjdpfxot Rmbye Abbjn

Condition: good (used), Code: 0291 Brand: ITALPRESSE Model: MEC B/4 Hydraulic cold press for wood materials, panels, furniture, doors, composite materials, aluminium and various Codpfxjyhdqhs Abbjgn Technical data: Sturdy structure Platens dimensions mm 2300 x 1100 NEW aluminium platens top coating Opening between platens mm 300 N° 4 pistons diameter mm 70 Hydraulic control unit motor 2 Hp Thrust 50 ton Overall dimensions mm 3000 x 1500 x 1700 h

Condition: used, Year of construction: 2011, machine/vehicle number: 1205, Perfect binding line Kolbus KM 412.B Year: 2011 Consisting of Book block feeder Meccanotecnica XMT Year: 2011 - Infeed conveyor from the right Gathering machine Kolbus ZU 841.B Year: 2011 Description: - Hand feeding station - Universal base: 18 - Number of gathering stations: 18 - ATC thickness control - Optical sheet control: SignalLynx Card gluer Kolbus KK 841 - Hotmelt glue unit: Nordson Problue - Air center: VariAir central system - Reject gate for incomplete products: AS 841 - Set up element - Intermediate element with vibrating - Transfer into the binder Perfect binder Kolbus KM 412.B Year: 2011 Description: - Number of clamps: 30 - Main milling station - 1st spine preparation station - 2nd spine preparation station - 3rd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for 1st spine glue system - Cold glue spine gluing, interchangeable - Intermediate drying station (infrared) - Base for 2nd spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 375.C - PUR spine gluing unit, interchangeable - PUR premelter for PUR spine glue unit: Nordson XNO 962 - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit: LH 375.A - Gauzing station - Heating elements in curve: IR - Stream cover feeder: SAL 413.B - Scoring station: 6 - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device (to the left) Transport system Kolbus TSE Description: - Transport system, length (approx) - Escape delivery Conveyor tower Three knife trimmer Kolbus HD 153.P Year: 2011 Product counter: 148 mio Cgjdpfot Rmhaex Abben Description: - Co-Pilot with touchscreen - Right hand infeed - Counter stacker - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 7-18 - Silicone spray device Book stacker Kolbus (RIMA) XRS 130 Year: 2011 Description: - Compensating stacker - Delivery to the left and right

Condition: used, Year of construction: 2003, Perfect binding line Consisting of Gathering machine Kolbus ZU 841.B Year: 2003 Description: - Hand feeding station: 1 - Number of gathering stations: 21 - Optical sheet control Reverse feeder Card gluer - Hotmelt glue unit: Nordson Problue 4 - Air center: Becker VariAir, 2005 Cgodpev N U U Nefx Abben - Set up element - Reject gate for incomplete products: AS 841 - Transfer into the binder Perfect binder Kolbus KM 410.B Year: 2003 Description: - Semi automatic setting - Co-Pilot with touch screen - Number of clamps: 20 - Main milling station - 1st spine preparation station - 2nd spine preparation station - 3rd spine preparation station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: Robatech ICS C 160 - PUR spine gluing unit, interchangeable (nozzle): EP 48V, 2008 - PUR premelter for PUR spine glue unit: Nordson DuraDrum DK 200, 2008 - Hotmelt side glue unit, interchangeable: 3 mm - Premelter for side glue unit: Robatech ICS C 30 - Stream cover feeder: Non Stop - Na 400.B - Scoring station - Pump(s) - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device Description updated

Condition: ready for operation (used), Year of construction: 2019, spindle speed (max.): 2,000 rpm, travel distance X-axis: 352 mm, travel distance Z-axis: 1,105 mm, spindle motor power: 35,000 W, controller manufacturer: FANUC, number of axes: 2, This DOOSAN PUMA 4100 B horizontal turning machine was manufactured in 2019. It features a maximum turning diameter of 550 mm and a maximum turning length of 1,042 mm. With a spindle speed of 2,000 rpm and 10 tool stations, it offers efficient machining capabilities. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA 4100 B machine we have for sale. Contact us for further details. • Swing over bed: 790 mm Cjdpfx Abeyhdbgebegn • Swing over carriage: 590 mm • Recommended turning diameter: 380 mm • Maximum turning diameter: 550 mm • Maximum turning length: 1,042 mm • Bar diameter: 116.5 mm • Spindle nose: ASA A2#11 • Front spindle bearing diameter: 180 mm • Spindle bore diameter: 132 mm • Number of tool stations: 10 • Maximum tool size (external): 32 x 32 mm • Boring bar diameter: 60 mm • Indexing time: 0.25 sec • Rapid feed X-axis: 16 m/min • Rapid feed Z-axis: 20 m/min • Quill diameter: 120 mm • Motorized quill bore taper: MT#6 • Quill travel: 120 mm

Condition: good (used), Sprockets, duplex sprocket, sprocket -Sprocket pitch duplex: 1" x 17.02 mm -Number of teeth: 57 teeth -Diameter: 471 mm -Total width: 90 mm Cgodpfx Asdg Snqsbbjn -Tooth width: 17 mm -Hole: Ø 90 mm Quantity: 1 piece available Price: per piece -other sprockets also in stock

Condition: used, machine/vehicle number: 007277, Max. panel width: 800 mm Cgjdpfx Abet H Tynoben Max. panel length: 2500 mm Max. panel stack height from the ground: 1650 mm Lifting capacity: 4500 Kg

Condition: used, machine/vehicle number: 007278, Max. panel width: 800 mm Max. panel length: 2500 mm Cgedot H Txqjpfx Abben Max. panel stack height from the ground: 1650 mm Lifting capacity: 4500 Kg

Condition: used, machine/vehicle number: 006370, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 12 nr Cgodpfx Ael Txw Hjbbsn

Condition: used, machine/vehicle number: 006561, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Combination Squaring Edgebanding Machine: First Pass Cedpfx Abjqa Rxaobsgn Max Panel Width: 2800 mm Operating Units Right Side: 11 nr Operating Units Left Side: 11 nr

Condition: used, machine/vehicle number: 007645, Type of edging: Thin edge, Thick edge, Solid wood Csdpfx Abewuz Niobegn Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 9 nr

Condition: new, The B 200 S is a robust Horizontal Mitre Cutting Bandsaw designed for efficient and precise cutting in industrial workshops and one-off production settings. As an entry-level model in the Semi-Auto Bandsaw category, this KNUTH machine features a swiveling saw frame that allows for miter cuts of up to 45 degrees, enhancing versatility for various tasks. The infinitely variable saw frame feed is controlled by a hydraulic valve, providing precise adjustments even during operation. Built for durability, the one-piece cast-iron saw frame and low-maintenance V-belt drive ensure consistent performance while minimizing vibration and noise. Equipped with a coolant system, quick-release device, and mobile base, the B 200 S is engineered for ease of use. With a cutting capacity of 205 mm for round materials and 205 x 215 mm for flat materials, this Horizontal Mitre Cutting Bandsaw is a smart addition to any workshop. You can order online to take advantage of this reliable solution from KNUTH. Cgodpfouyh I Uox Abbjn

Condition: used, Technical details: weight of the machine ca.: 7,5 t Out of valve slide production: Csdpfx Abeyg Npaebegn Lidköping centerless grinding machine Lidköping CL-4-B *

Condition: used, machine/vehicle number: 007813, X axis working area: 3390 mm Cedpfx Absx A Thdsbjgn Y axis working area: 1552 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 4 axes Total number of drilling spindles: 34 Total number of tool changer positions: 12

Condition: new, empty load weight: 4,460 kg, maximum load weight: 14,540 kg, overall weight: 19,000 kg, axle configuration: 2 axles, suspension: other, tire size: 435/50 R 19,5, color: other, gearing type: other, front tire size: 435/50 R 19,5, rear tire size: 435/50 R 19,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-sided tipper, side walls 600 mm high, galvanized, loading height approx. 1,080 mm, 4 x lashing eyes each 5 t embedded in the floor, 8 x lashing eyes each 3 t embedded in the floor, reinforced gear support winch with load and fast gear at the front, 435/50 R 19.5, , chassis and tipper body hot-dip galvanized, , surcharge for:, aluminium ramps (approx. 3.500 long) and 2 rear folding supports, Price: 1.700 Euro , , , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Cgedpfx Ajyg Dn Dsbbjn

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: M034362CAFG, turning length: 209 mm, spindle bore: 62 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 100 mm, travel distance Z-axis: 300 mm, rapid traverse X-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, total height: 2,200 mm, total length: 3,500 mm, total width: 2,000 mm, feed length X-axis: 170 mm, feed length Z-axis: 335 mm, quill diameter: 60 mm, overall weight: 4,000 kg, bar passage: 51 mm, controller manufacturer: FANUC, controller model: SERIES 0i-TD, number of slots in tool magazine: 12, HWACHEON VUTEX - 160 B MC CNC Lathe - Operating voltage: 400 V - Frequency: 50 Hz Csdpfx Asx Hwf Rsbbegn - Rated current: 75 A - Swing diameter over bed: 550 mm - Speed of driven tools: 5000 rpm The machine is equipped with a 12-position tool changer, including driven tool stations and a chip conveyor. Note: Does not include the tool holders visible in the photos! Attention: The item must be collected definitively between 04 and 12 March 2026 on a date to be coordinated. FCA D-75181 Pforzheim – loaded on truck

Condition: used, Compressor with refrigerant dryer Type AM B 7.5XBDK 10 500L - Year of manufacture: 2017 - Weight: 431 kg - 10 bar - 7.5 kW - 400 Volt - Dryer: 0.475 kW - Delivery rate: 1100 l/min - 500 liter receiver - Housing with insulation Cgsdpox Ha Nxjfx Abbjn

Condition: used, machine/vehicle number: 008370, X axis working area: 5055 mm Y axis working area: 1930 mm Working Table: Pod and Rail Main Electrospindle power: 19 KW Number of controlled axes: 5 axes Cgodpex A Tk Sefx Abbsn Maximum edge height: 60 mm Total number of drilling spindles: 29 Total number of tool changer positions: 31

Condition: used, machine/vehicle number: 008402, Max. panel width: 4300 mm Max. panel length: 2200 mm Main saw blade projection: 110 mm Cgsdpfxeygtbme Abbjn No of Rip saw Grippers: 9 No of Cross Cut Grippers: 4