Used Optical Profile Grinding Machine for sale (68,109)

Condition: not inspected (used), Year of construction: 1976, operating hours: 123,456,789 h, functionality: fully functional, machine/vehicle number: SWBE 9 VA 2, grinding length: 900 mm, grinding width: 500 mm, feed length X-axis: 900 mm, table length: 900 mm, table width: 400 mm, spindle speed (min.): 3,000 rpm, grinding spindle speed: 3,000 rpm, Equipment: documentation/manual, rotational speed infinitely variable, The machine is still in use and everything is operational. However, it should be overhauled at some point. Pickup date is negotiable. Heavy machine bed👍 Automatic feed. Unfortunately, there is no operating hours counter. Ncjdox Aknhepfx Ahvep

Condition: good (used), functionality: fully functional, total length: 1,300 mm, total height: 1,800 mm, total width: 800 mm, center height: 150 mm, overall weight: 700 kg, HENNINGER ZS 160 centre grinding machine - Centre distance: approx. 800 mm Note: The item must be collected on a binding basis between 12.05. and 22.05.2026, on a date yet to be coordinated. Ncsdpsyvtmijfx Ahvop FCA D-74821 Mosbach – loaded onto truck

Condition: used, Year of construction: 2025, total length: 1,200 mm, total width: 800 mm, total height: 1,800 mm, Empty weight: 450 kg Price: On request - Year: 2025 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: PB12093N2025005 - Operating hours: 0 Nedpfxoxixrhj Ahvjcp - Drive system: Conventional - Number of rolls [pcs.]: 3 - Power [kW]: 1.5 - Shaft diameter [mm]: 155 - Capacity diameter round [mm]: 50 - Transport dimensions: 1200mm x 800mm x 1800mm (l x w x h) - Transport weight [kg]: 450kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1989, band width 150 mm band length 3500 mm band speed 30 m/sec Scheiben-Ø 400 mm grinding feed 0 - 5 m/min work piece revolutions 0 - 140 U/min power capacity - workpiece power 2,2 kW grinding diameter 100 - 600 mm clamping length 6000 mm Njdpfx Aoyw Tkkjhvscp bed length ca. 8000 mm voltage 380 V / 50 Hz motor speeds: 1450 U/min power capacity 15 kW weight of the machine ca. 9,5 t dimensions of the machine ca. 8,6 x 2,6 x 2,5 m

Condition: used, Year of construction: 2013, max. wheel diameter 260 mm gear width 320 mm max. module 4,5 min. module 0,5 Control SIN 840D ical angle +/- 45 ° total power requirement 68 kW Nodpfex R U Hgjx Ahvscp weight of the machine ca. 15500 Kg dimensions of the machine ca. 3,25 x 3,25 x 3,30 m Fire extinguishing system Siemens Sinorix TM Knoll Filtering system VL1500/8000 year 2017 Wekal loading cell

Condition: used, Year of construction: 2012, max. wheel diameter 300 mm gear width 320 mm max. module 10 min. module 0,5 ical angle 45 ° Ncedpfxex R U Haj Ahvep frequency 50 Hz voltage 400 V main fuse 125 A x-axis 270 mm y-axis 250 mm z-axis 320 mm A - axis +/- 45 ° B - axis 360 ° C-axis 360 ° total power requirement 89 kW weight of the machine ca. 23,5 t dimensions of the machine ca. 11,2 x 5,5 x 2,9 m automated Oil slinger station EWAB workpiece storage Hoffmann coolant filter system HSF 100 SE/K Minimax fire extinguishing system W+W air filter system Promot Automation "Cellmaster" (3 cells) year 2019

Condition: used, Year of construction: 2004, double end profiling machine for the door and windows production working width 4000 mm 3 aggregates on each side 1 x saw 2 x vertical miling aggregate - spindle stroke 800 mm! long side profiling machine with 16 spindles machine comes with a lot of spare parts! Ncsdedfx Hcjpfx Ahvsp further technical data on demand Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: good (used), Year of construction: 2007, Kuehlmittelanlage 2.500l, Nsdpfx Aodgk H Ashvjcp Haftkraftregelung, halbautom. Wuchtsystem Schleiflaenge 3150 mm Schleifbreite 800 mm Werkstueckhoehe 650 mm Tischflaeche 3.150 x 600 mm Magnetspannplatte 3.000 x 600 mm Spindeldrehanzahl 1/min Schleifscheibenabmessung 450 x 100 x 127 mm Spindelleistung kW Gesamtleistungsbedarf 22 kW Maschinengewicht ca. t Raumbedarf ca. 11 x 3 x 2,4 m

Condition: like new (used), Year of construction: 2006, operating hours: 10 h, functionality: fully functional, grinding length: 600 mm, grinding width: 280 mm, total height: 1,950 mm, total length: 1,770 mm, total width: 1,500 mm, grinding height: 312 mm, grinding wheel diameter: 355 mm, distance table to spindle center: 490 mm, table speed: 25,000 mm/min, type of input current: three-phase, grinding wheel width: 25 mm, spindle speed (max.): 1,500 rpm, overall weight: 1,350 kg, grinding spindle motor power: 2,200 W, input voltage: 400 V, space requirement height: 1,950 mm, space requirement length: 1,770 mm, space requirement width: 1,500 mm, Equipment: documentation/manual, Proth PSGS 2550 AH Year of manufacture: 2006 The machine has only been used as a demonstration unit and is therefore virtually unused and like new. Complete equipment: - Computer-controlled vertical feed - Magnetic chuck with demagnetizer - Parallel dressing device with micrometer adjustment - Coolant system with magnetic separator - Centralized automatic lubrication - Halogen lamp - Accessories: - 10 pcs balancing grinding wheel flanges - 12 pcs grinding wheels, steel/stainless/universal, 355 x 25 x 127 Tyrolit - Balancing arbor with balancing stand Table clamping surface: 250 x 500 mm Fine-pole magnetic chuck: 250 x 500 mm Maximum travels (Y/X): 280 x 600 mm Max. distance table to spindle axis: 490 mm Max. distance table to bottom of grinding wheel: 312 mm Standard grinding wheel size: 355 x 25 x 127 mm Hydraulic longitudinal feed: 1 to 25 m/min Spindle speed: 1500 rpm Spindle motor: 2.2 kW Dimensions (LxWxH): 1770 x 1500 x 1950 mm Weight: 1350 kg Accuracy according to DIN 8632 Machine base made of double annealed cast iron High-quality spindle with precision tapered roller bearings, preloaded free of play both radially and axially, with maintenance-free permanent grease lubrication Double prism guides for longitudinal and cross travel Longitudinal and cross guideways coated with TURCITE-B and hand-scraped Table longitudinal movement hydraulic, table cross movement motor-driven Extremely smooth table reversing Separate hydraulic unit for improved hydraulic oil cooling and to prevent vibration transfer to the machine Ncodpsyw Rbasfx Ahvop Description of the computer-controlled vertical feed AD 1: - Plunge grinding or surface grinding selectable - Rapid traverse vertically to the workpiece - Transition to rough grinding - Transition to fine grinding - Spark-out - Return to starting position

Condition: ready for operation (used), tool grinding machine working perfectly Ncodsyw N D Tjpfx Ahvop

Condition: used, Year of construction: 2008, operating hours: 18,937 h, functionality: fully functional, machine/vehicle number: 67, STUDER S145cnc INTERNAL GRINDING MACHINE Ncsdpfx Asyw Nuxohvjp Series 65 Year of manufacture: Sept. 2008 Operating hours: 18,937 Price: €118,000 Service record verified. The machine is serviced annually by STUDER, with all wear parts replaced each time. This machine exclusively produces precision spindles with tolerances up to a maximum of 0.0003 mm. Operates with grinding oil. Single-shift operation; over the past two years used in two-shift operation. The machine is operational and can be inspected upon request. The reason for sale is the acquisition of a new machine. Extras: Spindle attachments and flanges available by arrangement. Specifications: • Swing diameter: 448 mm • Center height: 225 mm • Chuck spindle head with rolling bearings, mounting taper ISO50 – spindle nose Ø110 mm, spindle bore Ø50 mm • Machine bed made of Granitan S103 • Workpiece table with ±30° swivel range • Direct measurement system for X and Z axes • Measurement control with Movomatic C25 touch probe (switching) • FANUC-CNC control 21i-TB • Portable Studer PCU terminal with LCD display • Maintenance contract valid until 2022 • The machine is currently in operation • Transport to be arranged by the buyer The machine is equipped with four spindles: one external spindle, two internal spindles, and one internal spindle with longitudinal positioning device. RPM – one spindle: 60,000 rpm, two spindles: 42,000 rpm, one spindle: 5,000 rpm Type: Fischer

Year of construction: 2014, condition: good (used), functionality: fully functional, FOM INDUSTRIE DALI 70 For profiles up to 7m 6.5KW Electrospindle ISO30 10 tool magazine on head 8 Vices with independent positioning Automatic lubrication of guide blocks and recirculating ball screw lead screws Ncjdpfx Aexcywlohvep Pendular machining MQL Barcode Reader Dimension 8600x2050 Weight 3900KG Can be loaded on truck

Condition: ready for operation (used), Year of construction: 1977, Immediately available due to business closure: Reform Hydraulic Knife Grinding Machine Type AR 40 Type 40 Year of manufacture: 1977 Grinding length: 1000 mm Grinding head: 400 mm diameter Swivelling magnet: 1000 x 150 mm Coolant system Grinding motor: 4 kW Weight: 2 tons Ncsdsyw I Nhjpfx Ahvjp Offered at a price of EUR 3,250—plus VAT, ex location.

Condition: ready for operation (used), Year of construction: 1979, Immediately available ex location: Reform Knife Grinding Machine Type AR 18 Model 4 Year of manufacture: 1979 Grinding length: 1800 mm Grinding width: 400 mm Njdpfxoyw I Nbe Ahvecp Drive: 4.5 kW Magnet: 1800 x 400 mm, swiveling Weight: 4 t Coolant system Price: EUR 5,500.— plus VAT, ex location.

Condition: good (used), Year of construction: 1986, Inner diameter: 20…400 mm Ncodpeyw Ib Defx Ahvjp Grinding depth: 315 mm Internal grinding spindle speeds, stepless: 2,640…16,500 rpm Workpiece spindle speed: 40…400 rpm Table feed rate: 0.1…8 m/min Rapid traverse: 10 m/min Table travel: 630 mm Total power requirement: 16 kW Machine weight approx.: 5.8 t Additional information: Grindable diameter within workpiece guard: internal 20…400 mm; external 500 mm Max. workpiece diameter in workpiece guard: 500 mm Max. grinding depth: 315 mm Grindable taper angle: 60° Internal grinding spindle speeds: 2,640…16,500 rpm Drive power for face grinding attachment: 4 kW Drive power for workpiece motor: 1.5 kW Workpiece spindle speeds: 40…400 rpm Table speed: 0.1…8 m/min Rapid traverse: 10 m/min Table travel: 630 mm Max. distance from workpiece spindle flange to grinding spindle carrier: 1,250 mm

Condition: new, Year of construction: 2024, Grinding wheel DxB 455 x 255 mm workpiece diameter 1-60 mm, control disc DxB 255 x 255 mm, disc speed 10-100 rpm, power SS 11 kW, weight approx. to 3.7, size approx. 2,700 x 1,700 mm Machine is suitable to the pass and feed grinding, hardened and ground Guide pave grinding and control spindle with hydrodynamsicher three-point bearing, lubrication for carriage and delivery spindles, rule discs powered by DS engine, frequency controlled, hydraulic dressing equipment for grinding and rule disc. Equipment of electrical, predominantly with Siemens components, electrical cabinet in Germany built up, GC 1810-NC stepper motor with Siemens S7 control for grooving and extra movement. Ncjdpfxsdlgq Uo Ahvjp Very economic price / performance ratio

Condition: used, Year of construction: 2016, Used machine Cross sanding machine Year of construction 2016 Product advantages Underneath perfectly lacquered, stained or oiled wood surfaces there is always a perfectly sanded surface! Felder sanding machines are characterized by solid construction, state-of-the-art machine technology and maximum productivity. The most important highlights at a glance: ? Sanding width 1350mm ? Sanding width 3-170mm ? Combined superfinishing unit ? Touch-screen control for work processes ? The Felder operating concept guarantees maximum process and work safety Your advantages at a glance: Time saving ? Motorized adjustment of the contact roller in the 1/100 mm range from the control panel ? Innovative unit arrangement for pre-sanding / fine sanding of veneered workpieces ? Brushing devices at the machine outlet ? Lacquer sanding against additional equipment ? comfort ? Fixed feed table height (machine head adjusts) ? Touch screen control with clear image display and program memory ? Machine data acquisition for sanding belt wear and much more. ? Tool-free handling when changing the sanding belt ? Large fold-down table extensions for the heaviest workpieces ? flexibility ? Units for calibration, fine sanding and lacquer sanding ? Variable feed speed up to 20 m/min by means of inverter Innovation ? Electronically segmented sanding pad with silicone technology for minimum air consumption ? Combined superfinishing unit incl. chevron sliding belt to compensate for oscillation marks ? quality ? Solid machine construction ? Durable machine components Basic equipment Control unit finish 1350 classic Control unit with 7" color touch screen 100 program memory locations Maintenance intervals Plain text error messages Ammeter for load monitoring Feed table fixed infeed height - fixed table, 900mm, electric height control of the units incl. fine adjustment from the control panel, V-speed infinitely variable from 2.8-20m/min. Adjustable via inverter from the control panel Manual protection and workpiece over-thickness protection Workpiece detection sensor with 25 sensors 55 mm segment width Endlessly manufactured belt conveyor with honeycomb structure Automatic feed carpet centering Cross sanding unit finish 1350C high gloss Njdpfx Ahjw I Uv Ujvscp Segmented, electronic-pneumatic sanding pad ESC, segment width 25 mm, incl. quick-change system Chevron sliding belt between sanding pad Sanding belt for homogeneous sanding without oscillation marks Variable pressure control on the operating side Electro-pneumatic sanding belt oscillation Electronic sanding belt run-off protection 1 motor with 7.5 kW (10 hp) Star-delta start-up Cleaning fan with time control Cutting speed 12 m/sec Sanding belt 140 x 4560 mm Combined superfinishing unit 1350C: Rubberized, grooved contact roller with 85-90° Shore hardness and 142 mm diameter Electromot. Position-controlled grit compensation segment, electro-pneumatic sanding pad ESC, segment width 25 mm, incl. quick-change system Variable pressure control on the operating side Chevron sliding belt between sanding pad and sanding belt belt for homogeneous sanding without oscillation marks Mechanically pre-tensioned rubber pressure rollers Electro-pneumatic sanding belt oscillation Electronic sanding belt run-off protection

Year of construction: 2005, condition: ready for operation (used), - USED - CNC EXTERNAL GRINDING MACHINE CENTRE HEIGHT: 171 mm DISTANCE BETWEEN CENTRES: 430 mm MAX GRINDING LENGTH: 400 mm Njdpfx Ahoyvlxdsvecp MAX ADMITTED LOAD: 150 Kg X-AXIS TRAVEL: 170 mm Z-AXIS TRAVEL: 600 mm RAPID FEEDS: 12 m/min SPINDLE: 830 rpm; 24 Nm GRINDING WHEEL SIZE: 508 x 80 x 203,2 mm MOTOR POWER: 7,5 kW CONTROL UNIT: FAGOR 8055 TCO WEIGHT: 4500 Kg ACCESSORIES: PAPER FILTER ; FUME EXHAUSTER ; MAGNETIC FILTER ; GRINDING WHEEL BALANCER NOTE: 0-9° SWIVELLING TABLE; SWIVELLING CHUCK; INVERTER FOR KEEPING THE PERIPHERAL EXTERNAL GRINDING WHEEL SPEED STEADY; PIECE LOCKING DEVICE WITH PNEUMATIC SYSTEM; HYDRAULIC OPENING TAILSTOCK AND DEVICE FOR SEARCHING THE CYLINDRICITY

Condition: used, Year of construction: 1997, Weight ca. 4.000 kg control Sütron BT20 Number of boring spindles 4 St. WEINIG UNIVAR 10 automatic rebate unit from a UC-Matic window system, without function. - Suetron BT20 control unit Njdpelf H Sqefx Ahvecp - Machine incomplete - Details on request - Picture similar.

Condition: good (used), Year of construction: 2005, operating hours: 374 h, functionality: fully functional, machine/vehicle number: 112434, total length: 7,310 mm, total width: 1,800 mm, total height: 2,300 mm, overall weight: 4,200 kg, input frequency: 50 Hz, type of input current: three-phase, working height: 80 mm, power: 20 kW (27.19 HP), pressure: 7 bar, Straight line bevelling machine for glass with 7 wheels, serviced in 2025. Minimum glass size: 40 x 40 mm. Speed: 0.5 – 4.1 m/min. Glass thickness: 3 – 20 mm. Bevel angle: 3° – 45°. Maximum bevel width: 50 mm. Power: 20 kW. Excluding water tanks and pump (connected to central system). Njdoyg Dhqopfx Ahvecp

Condition: reconditioned (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 942, total length: 9,170 mm, total width: 1,635 mm, total height: 3,100 mm, overall weight: 4,140 kg, input current: 44 A, input frequency: 50 Hz, type of input current: three-phase, input voltage: 400 V, power: 21 kW (28.55 HP), workpiece weight (max.): 800 kg, pressure: 7 bar, Lattuada TL10 AV C straight line edger mitring 0-45°, cerium. Refurbished at our warehouse in Belgium. Tested and ready to go. Nedpew U Nzrsfx Ahvjcp

Condition: good (used), - All rubber rollers new or as good as new - Belt length 3000 mm - Year of manufacture Nedpfoulvipox Ahvecp - Price On request

Condition: good (used), Cup wheel diameter: 175 mm Table clamping surface: 150 x 250 mm Max. installation height without/with magnetic chuck: 250/150 mm Grinding area: 100 x 360 or 150 x 190 mm Grinding spindle speed: 2800 rpm Ncedpfjyvfq Eox Ahvjp Drive motor: 380 V, 1.5 kW Required space approx.: 800 x 600 x 1600 mm Weight approx.: 200 kg

Year of construction: 1999, condition: ready for operation (used), Grinding dimensions X/Y: 600mm/305mm, max. workpiece height: 350mm, feed rate X: 24m/min, feed rate Y/Z: 2m/min, machine dimensions X/Y/Z: approx. 3000mm/2700mm/2500mm, weight: approx. 3200kg, control: Siemens Sinumerik. The control has a circuit board defect. Documentation vorhanden. An inspection on site is possible. Ncjdjywy Rqopfx Ahvsp

Condition: ready for operation (used), Contact Belt Grinder LÖSER KS 360 for grinding pipes / round material Nedpfjywy Ddox Ahvecp - Abrasive belt length: 2500 mm - Abrasive belt width: 5 - 75 mm - Material grinding length: endless - Grinding range / diameter: 3 - 70 mm - Belt speed: 7.5 - 34 m/s - Contact wheel diameter: 100 - 225 mm - Motor power: 1.6 / 2.6 kW Dimensions (LxWxH): 1.2 x 0.6 x 1.8 meters / Weight: 350 kg Subject to errors and omissions.