Used Offset for sale (736)

Condition: good (used), Year of construction: 2009, functionality: fully functional, Full Automatic Perfector 5/0 - 2/3 Heidelberg Autoplate (Automatic Plate Changing System) Prinect Press Center Control Station with Wallscreen Prinect Axis Control: High-performance Color Measurement System Preset Plus Feeder DryStar Combination CANopen IR Dryer with 2 Slides (IR/Hotair) Ultrasonic Double Sheet Control InkStar CAN Preset Plus Delivery X2 / 160 cm (2 modules) FilterStar: 2-stage dampening solution filtration system ( for Hydro and Combistar) Technotrans CombiStar CANopen: Ink. Temperature Control (Watercooled) CoatingStar CANopen PowderStar AP 500-P: Powder Sprayer Staticstar Compact: Antistatic Device on Feeder & Delivery Coating System with Doctor Chamber Blade Steel Plate in Feeder & Delivery AirStar: Central Air Supply Cabinet (Aircooled) Dynamic Sheet distance control in the Delivery trough a Ultrasonic Sensor AirTransfer System (For Sheet Transfer) Double Sized Impression Cylinder - Chromed Alcolor Vario Dampening Automatic Washing Devices Nsdow T Tqzspfx Ahvekw Impression Account: 230 Mio.

Condition: good (used), Year of construction: 1999, Heidelberg Autoplate (Automatic Plate Changing System) Nsdpfxsw U A Nps Ahvokw +Version Alcolor Dampening CP Tronic Control System Automatic Ink Roller Washing Device Blanket Washing Device Impression Cylinder Washing Device Grafix Alphatronic 200: Powder Sprayer

Year of construction: 2001, operating hours: 126,000,000 h, condition: good (used), machine/vehicle number: 204750, Perfecting 2/2 - 4/0 CPC 1-04: Off Press Ink & Register Control Alcolor Dampening Semi Automatic Plate Change Nksdpjlml Nhjfx Ahvjw Grafix Alphatronic 200: Powder Sprayer Technotrans Cooling Device Automatic Ink Roller Washing Device Blanket Washing Device Staticstar Compact: Antistatic Device Impression Account: 126 Mio.

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 460 mm, controller manufacturer: OKUMA, controller model: OSP P200M, total height: 2,950 mm, total length: 2,900 mm, total width: 2,600 mm, rotary table diameter: 400 mm, rotational speed (min.): 25 rpm, rotational speed (max.): 15,000 rpm, overall weight: 8,000 kg, operating hours of spindle: 18,500 h, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, OKUMA MU-400V with OKUMA OSP P200M CNC Control 5-axis CNC machining center Spindle drive 50-15,000 rpm (ISO40/BIGPLUS) 22 kW / 198 Nm Tool changer SK40 according to DIN 69871 (BT40) Tool changer with 32 magazine positions Electronically controlled spindle head flushing system Thermal compensation and machine body ventilation system for compensation or reduction of thermal errors (TAS-S and TAS-C) Coolant supply through the spindle 15 bar / 20 l/min Double screw chip conveyor for chip removal from the working area Synchronous tapping and thread milling Nodpfx Aoyq Sl Eohvokw Removable electronic handwheel 100 workpiece zero points 200 tool length and 200 tool radius offsets LCD color display OKUMA I-MAP auxiliary dialog 2 USB 2.0 ports Ethernet interface with browser and DNC-T1 for program transfer Work area shower cooling system Hinged belt chip conveyor, discharge height 1000 mm Tool breakage monitoring and tool length measurement

Condition: used, table length 2400 mm table width 1200 mm table height 200 mm bore 28 mm 100 x 100 mm material thickness ca. 24,5 - 27 mm 200 mm work height max. 850 mm Weight 980 kg Special item - The drill pattern on all side rails is offset downwards by approx. 1 mm. The clamping dimension for angle or table-to-table connection is not specified. >. - high-quality steel S355J2+N + plasma nitriding - Drill holes in side panel in diagonal grid - Corners, edges and drill holes bevelled 45 Nkjdpfx Ajyxhhyshvow - Construction reinforced by ribs - incl. base basic equipment 650 mm

Condition: used, maximum load weight: 34,725 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 10/2024, next inspection (TÜV): 10/2026, loading space length: 8,912 mm, loading space width: 2,400 mm, loading space height: 2,285 mm, loading space volume: 50 m³, total width: 2,550 mm, total height: 3,672 mm, Year of construction: 2024, Equipment: ABS, STAS 3-axle HardoX steel tipper, 50 cbm, "X-Shape" First registered October 2024, like new condition Dimensions (L x W) (LxWxH) 8,912 x 2,350/2,450 x 2,285 mm (conical design in width) Curb weight only 7,275 kg Z-chassis, offset design Floor made of 5 mm Hardox HB450 steel Front wall and side walls made of 4 mm Hardox HB450 steel Sloping front wall, with access inside Nodpfjyxb E Eex Ahvekw Double-leaf portal doors, pneumatic re-locking 1 grain pusher in the right door leaf Reinforced roll-top tarpaulin, central locking HYVA tipping ram type Alpha, suitable for high and low pressure Aluminum fifth wheels, full load 2 pneumatic vibrators below the body SAF axles with large disc brakes, 430 mm 1st axle: lift axle with traction assist WABCO Trailer EBS with anti-skid system RSS WABCO Smartboard, Automatic tipping lowering Lifting and lowering device Tires: 385/65 R 22.5 ALCOA Dura-Bright high-gloss alloy wheels Aluminum leaning ladder Shovel and broom holder Toolbox on the right 4x LED reversing lights RENTING is the new BUYING, also available from us as a FULL-SERVICE RENTAL.

Condition: used, Numbering/perforating unit for Heidelberg GTO 46 Nkodpfx Ahjyxbv Djvjw Numbering heads Rollers Small parts, etc. Packed in Bacher accessory cabinet

Condition: good (used), Year of construction: 2016, Ref:11076 . 2016 Muller Martini SIGMA Three Knife Trimmer On demand trimmer for digital dooks finishing Features: Designed for the finishing of both offset- and digitally-produced books in a one-off, short-, or large-run workflow. Fully-automated, one-off book 3-knife trimmer. Ultra-efficient digital book trimming system with zero makeready for optimal one-off book production. Workflow can be consolidated and efficiently processed through the SigmaTrimmer work center with minimal production planning effort & considerable labour savings. Bound, untrimmed books of varying sizes and thickness can be fed into the SigmaTrimmer continuously, without stopping to change parts or key in any data. Book printers can cut books of different formats and thicknesses in quick succession, without interruption. The format for each book is read with a barcode scanner during infeed and all settings are made automatically, which eliminates makeready time. Specification: Max speed: 1,000 cycles/hr Max untrimmed size: 320x240mm Min untrimmed size: 154x108mm Max book thickness: 40mm Min book thickness: 2mm Max Front trim: 86mm Min front trim: 3mm Max foot trim: 75mm Min foot trim: 3mm 5 x Sigma trimmers available, all the same age. Can be bought individually or as multiples. Njdpfx Ahoyw Hwdjvjkw

Condition: used, Year of construction: 1998, Offset 2 color Shinohara 66-2 Year: 1998 Number of impressions (mio): 79 Machine control - Shinohara console Printing units - Number of printing unit(s): 2 - Straight machine - SAPC Semi Automatic Plate Change - Cooling system - Dampening system: Shinohara Delivery Nodpfjywv Ewsx Ahvekw - Standard delivery - Powder spray: OxyDry Accessories - Plate bender: on delivery Max. output (s/h): 11000 Max. sheet size (mm): 483 x 660 Min. sheet size (mm): 200 x 296 Max. paper thickness (mm): 0,4

Condition: used, Year of construction: 2001, Offset 4 color Heidelberg CD102-4 Year: 2001 Number of impressions (mio): 445 Machine control - CP 2000 Feeder - Non-Stop feeder - Steel plate in feeder Printing units - Number of printing unit(s): 4 - Straight machine - AutoPlate - Alcolor dampening - Automatic inking roller washing device - Automatic blanket washing device - Automatic impression cylinder washing device - Dampening cooling and circulation system: Heidelberg HydroStar beta. D Drying - IR dryer in delivery Delivery Nedpfxjywv Eqo Ahvskw - Non-Stop delivery: no rake - Powder spray: Grafix PowderStar Exatronic Plus Accessories - Cabinets air cooled - Compressed air compressor, excluded

Condition: used, Year of construction: 2008, Offset 8 color with perfecting Heidelberg SM102-8-P Year: 2008 Number of impressions (mio): 140 Machine control - Prinect Press Center - Wallscreen Feeder - PPF Preset Plus feeder - Non-Stop feeder - Suction feeder table - Double sheet control - Steel plate in feeder Printing units - Number of printing unit(s): 8 - Machine with perfecting: 4/4 - AutoPlate - Alcolor dampening - CombiStar: Technotrans - PerfectJacket cylinder jackets - Automatic inking roller washing device - Automatic blanket washing device - Automatic impression cylinder washing device: NOT available - Dampening cooling and circulation system: Technotrans beta c. - AlcoSmart - Ink temperature control Delivery - PPD Preset Plus Delivery - Non-Stop delivery: no rake - Powder spray: Weko Accessories - Cabinets air cooled Nksdpfx Ahjywv Ekjvsw - Compressed air compressor, excluded

Condition: ready for operation (used), Plate size: 1820 x 1900 mm Plate thickness: 405 mm with 20 mm offset surface: 405 x 1820 mm 2 upright granite columns Width / length / height: 350 x 600 x 1400 mm Nodpfx Ahshcr I Tsvokw 2 holes in the broad side 230 mm and 2 holes 150 mm Total weight: 5300 kg

Condition: ready for operation (used), Plate size: 1900 x 1820 mm Njdpfx Ahehc S Rnovskw Plate thickness: 405 mm with 20 mm offset surface: 1820 x 385 mm Weight approx .: 4 t

Condition: excellent (used), Overview Now in stock at Glendale we have this Refurbished Foliant Vega 400A Automated Laminator with Digital Foiling. This B3+ laminator has been fully refurbished to excellent working condition and is designed for heavy duty digital output and B3 litho lamination. The Vega 400A is a compact industrial laminating machine capable of speeds of up to 18 metres per minute, producing over 2,000 SRA3 sheets per hour. It features a deep pile vacuum feeder, high speed bump separator, and non-stick pressure roller, ensuring reliable feeding and consistent lamination quality across both digital and offset printed sheets. The system includes an adjustable twin decurl unit for offset and digital prints, a digital foiling module for foil, holographic, glitter, and spot-UV style finishes, and the optional jogger reception unit for neat sheet delivery. The integrated pneumatic compressor allows the machine to operate without any external air supply, making it a versatile and compact finishing solution. Key Features Rising pile vacuum feeder with belt head Built-in Becker vacuum pump Quick change film shaft with tension control Film capacity up to 3000 metres (22–42 micron) Inline trim slitter and perforating wheel Twin adjustable decurl system Heated chrome laminating roller Pneumatically adjustable pressure High speed bump separator Touchscreen control system Optional jogger reception included Why Buy the Refurbished Foliant Vega 400A? The Refurbished Foliant Vega 400A provides a highly productive and versatile laminating solution for print businesses producing both digital and offset work. Key benefits include: Production speeds of up to 18 metres per minute Output of over 2000 SRA3 sheets per hour Integrated digital foiling capability for premium finishes Twin decurl system for digital and litho prints Integrated compressor – no external air supply required Nkjdpfoyxp Nxex Ahvow Compact industrial footprint Fast warm-up time of under 10 minutes Optional jogger delivery included This system allows printers to produce high quality laminated products while also adding premium finishing effects such as digital foil and decorative lamination. Specifications Manufacturer Foliant Model Vega 400A Max sheet size 380mm x 660mm Min sheet size 200mm x 200mm Paper weight 115gsm - 500gsm Max speed 18 metres per minute Laminating roller pressure Pneumatic Feeder Automatic Suction Vacuum Belt Seperator Automatic bump rollers Decurl bar Standard - in run adjustable Air compressor Integrated as standard Warm up time 8 minutes Temperature range 80 - 140°C Jogger reception Included Power requirement 230/240v 50/60Hz Machine weight 370kg Machine dimensions with jogger (L)1980mm x (W)820mm x (H)1230mm

Year of construction: 2020, condition: ready for operation (used), functionality: fully functional, We are selling our Knuth Werkzeugmaschinen GmbH lathe. High-quality centre lathe with leadscrew and feedshaft, equipped with a 3-axis position display. We are relocating and no longer require the machine, so it is available for sale. It is currently still in operation and can be inspected on-site. Proven classic with gear transmission: - Cost-effective and retains its value - Clearly arranged control panel with ergonomically positioned selector levers - Camlock spindle mount D1-6 - Wide, ground and hardened bed with a solid one-piece cast base - Tailstock can be offset laterally for taper turning - Large selection of thread pitches - Removable gap bridge for machining large diameters - Stop spindle with four adjustable length stops - Optional: quick-change toolpost system, among others 3-axis position display: - Higher machining accuracy - Reduced error rate - Greater production reliability - Significant time savings - Increased productivity - Optimal legibility of the display - User-friendly functions - Clearly arranged keypad - Resolution 0.01 / 0.005 mm - Pre-setting of coordinate values - Retains axis position when display is switched off - Bolt hole circle calculation - Integrated calculator function - Memory for 10 tools - Switch between radius/diameter display - mm/inch conversion - Easy mounting, maintenance-free operation - Display of cross slide (Z0) and carriage (Z1) both individually or as a differential/sum value on lathes Technical data – Turnado 230/1500 – Centre lathe with leadscrew and feedshaft Working area - Centre distance: 1500 mm - Max. swing over bed: 460 mm - Max. swing over cross slide: 270 mm - Max. swing over gap bridge: 690 mm - X-axis travel: 285 mm - Z1-axis travel: 128 mm - Gap bridge length: 165 mm - Bed width: 300 mm - Top slide swivel range: ±52° Main spindle - Spindle speed (12 steps): 25–2000 rpm - Spindle bore: 58 mm - Spindle mount: Camlock D1-6 - Spindle taper: MT 6 Feed - X-axis feed: 0.014–0.784 mm/rev - Z-axis feed: 0.031–1.7 mm/rev Nkodpfx Asyxfuqshvjw Thread cutting - Metric threads (41): 0.1–14 mm - Diametral pitch threads (50): 4–112 DP - Module threads (34): 0.1–7 mm - Whitworth threads (60): 2–112 TPI Tailstock - Tailstock quill diameter: 60 mm - Tailstock taper: MT 4 - Tailstock quill travel: 120 mm - Tailstock lateral adjustment: ±13 mm / ±0.5" Drive capacities - Main drive motor power: 5.5 kW - Supply voltage: 400 V Dimensions and weight - Dimensions: 2750 x 1080 x 1340 mm - Weight: 1970 kg

Condition: as good as new (ex-display), Year of construction: 2026, Karstens K11 650 Premium Retrofit Cylindrical Grinding Machine Manufacturer: Karstens Technical specifications: Centre distance: 750 mm Centre height: 180 mm / (250 mm optional) Workpiece weight: 100 kg (between centres) – 250 kg (supported between centres) Grinding wheel diameter: 400 mm or 500 mm (external grinding wheel) Workpiece spindle: MT 4, stepless speed adjustment 30–450 rpm, swivel range 0–90° Tailstock: MT 4, quill stroke 45 mm, quill offset adjustment Quill force: 200–600 N manual, (up to 2500 N adjustable as option) Table swivel adjustment: 12.5 degrees Cross slide travel: 80 mm Rapid traverse distance: 50 mm Coarse adjustment with air cushion: 280 mm External grinding spindle motor: 4 kW / (5.5 kW optional) Stepless speed setting of the grinding wheel via potentiometer Internal grinding spindle motor: 2.2 kW Workpiece spindle motor: 1.1 kW Hydraulic motor: 1.5 kW Lubrication motor: 0.1 kW Hydraulic tank: 80 litres Machine weight: Net 3,500 kg Feed drive via DC motor Air-cushioned rapid adjustment of the grinding spindle head for fast and precise positioning. Nkodpfx Ahoiv Audovsw Separate drive for external and internal grinding spindles. Fully automatic operation, feed movement controlled via handwheel switch: rapid feed, rapid return, grinding operation, feed stop, mym-feed. Automatic longitudinal grinding cycle Central coolant supply for all grinding zones Workpiece headstock with steplessly adjustable drive, with live and lockable spindle. Digital feed control with Siemens panel and Siemens PLC for plunge and traverse grinding, input for retraction, infeed values, feed rates, spark-out times, idle strokes, compatible with traditional Karstens infeed control, with colour Siemens touch panel. Scale in X and Z axis by HEIDENHAIN. Comparable with Weiss / EMAG / GP cylindrical grinders / Studer / Kellenberger / Schaudt / Tschudin / Tacchella / Dannobat / Bahmüller / Fortuna.

Condition: used, Year of construction: 2008, functionality: fully functional, travel distance X-axis: 3,150 mm, travel distance Y-axis: 1,850 mm, travel distance Z-axis: 1,000 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 24 m/min, spindle speed (max.): 24,000 rpm, torque: 87 Nm, Fidia C20 CNC WORKING AREA X-axis longitudinal travel: mm 3,150 Y-axis transverse travel: mm 1,850 Z-axis vertical travel: mm 1,000 MAX AXIS SPEEDS X, Y axis feed rate: m/min 30 Z axis feed rate: m/min 24 WORK TABLE Clamping surface: mm 3,000 x 1,600 Njdpfxoyw Tddo Ahvskw Maximum permissible load: kg/m² 5,000 T-slots: • Longitudinal 8 H12 + 1 H8 • Width mm 22 • Pitch mm 160 ELECTROSPINDLE Maximum power (S6 60%): kW 55 Spindle speed range: rpm 240 ÷ 24,000 Constant power range: rpm 6,000 ÷ 24,000 Maximum torque: Nm 87.5 Tool holder: HSK-A63 C-axis travel: ± 200° C-axis speed: °/min 2,000 C-axis offset from spindle axis: mm 75 A-axis travel: +95° / -110° A-axis speed: °/min 2,000 Max distance spindle nose – table surface: mm 1,175 Machine equipped with: • 24-position tool magazine • Remote electronic handwheel • HMS system for head calibration • Various equipment included with the machine • User and maintenance manual and CE declaration of conformity

Condition: used, maximum load weight: 28,260 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 11/2022, next inspection (TÜV): 07/2026, Availability upon agreement - short-term rental. Current photos upon request! Saddle height: 1,150 mm. Hydraulics: 110 l/min, 225 bar. Hydraulic hoses: 4.4 m. Hydraulic connections: 1" male pressure, 1" female return. Continuous chassis, BPW On Road Eco Air axles, 1st axle lift, EBS 2S/2M KNRORR, JOST steel landing legs, hydraulic connections at the front wall and between the landing legs, spare wheel holder, toolbox at the rear right, 2 wheel chocks, 6 kg fire extinguisher, 3-meter ladder, wired and radio remote control for floor, 4 LED work lights (2 each behind the landing legs and 2 each behind the 3rd axle), left side guard tarpaulin (Rollfix) “A”-plate, hydraulic hoses 4400 mm 1”/1” screw connection – without side guard tarpaulin. Aluminium body 2/2 mm, front walkway with 2 ladders, foldable service hatch, floor type 7 aluminium, suitable for forklifts up to 7 tons, double-wing rear doors with 4 locking bars (18 mm), pneumatically released on the side, roof sliding tarpaulin 650 g RAL5003 BLUE without reinforcement, 4 adjustable rear roof bows, offset curtain stoppers, 12 pairs of lashing rings. Nodpfxeyw Dx Se Ahvjkw

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 730 mm, travel distance Y-axis: 580 mm, travel distance Z-axis: 560 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530 3D, table load: 500 kg, spindle speed (max.): 18,000 rpm, spindle motor power: 15,000 W, number of axes: 5, This 5-axis DMG MORI DMU 60 Monoblock was manufactured in 2016. It features an X-axis travel of 730 mm, Y-axis travel of 560 mm, and Z-axis travel of 560 mm. The machine is equipped with a powerful motor spindle capable of reaching speeds up to 18,000 rpm and includes a 24-pocket tool changer. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 60 Monoblock vertical machining centre we have for sale. Contact us for further details. • Working area / travel: • Modification: X-axis travel reduced by 100 mm (effective X travel 630 mm) • Main drive & spindle: • Motor spindle SK40 with active cooling • Power: 15 kW (40% duty) / 10 kW (100% continuous) • Tooling system: • Tool holder: SK40 (DIN 69871) • Tool clamping: DIN 69872 • Tool changer: Pick-up system Njdpsyvfpbsfx Ahvokw • Magazine: 24 pockets (SK40) • Work table: • Integrated NC rotary table in rigid table • Rotary table Ø 600 mm; total table 1,000 x 600 mm • T-slots: 1x 14 H7 (alignment, centered) + 8x 14 H12 (clamping) • T-slot spacing: 63 mm • Permissible load: 500 kg • Milling head: • Controlled NC-swivel B-axis with hydraulic clamping • Spindle offset: 100 mm • Swivel range: -120° to +30° • Control system: • Electronic handwheel iTNC 530 • Control language: German Additional equipment • Workpiece measurement: Heidenhain TS 640 infrared probe (SK40) • Tool measurement: Blum laser (in-machine vertical tool length and diameter) • Chip conveyor • Flushing gun with pump (1 bar / 40 l/min theoretical capacity) • Networking: DMG Netservice Basic Package Euro ISDN (Netservice Box, Cisco Euro ISDN Router, license) Technical Specification Taper Size SK 40

Condition: used, Year of construction: 1989, max. wheel diameter 400 mm gear width 275 mm max. module 6 Overall size 300x310x245 cm weight of the machine ca. 5,0 t Specifications: - Maximum wheel diameter: 400 mm - Min. module: 1 - Max. module: 6 - Table diameter: 370 mm - Maximum wheel diameter: with counter support: 340 mm / without counter strut: 400 mm - Max. axial offset: 275 mm - Max. tangential adjustment: 100 mm - Max. tooth helix angle: 45 degrees - Max. cutter diameter: 145 mm - Max. hob length: 170 mm Performance - Cutter speed: 50-200 rpm - Axial feed continuously adjustable: 0.2-10 mm/rev - Tangential feed continuously adjustable: 0.1-5 mm/rev - Radial for spur gears: 0.1-4 mm/rev - Radial for worm gears: 0.025-1 mm/rev - Rapid traverse axial: 500 mm/min - Rapid traverse tangential: 250 mm/min - Radial for spur gears: 400 mm/rev - Radial for worm gears: 100 mm/rev - Motor power: 7.4 kW Dimensions - Machine 5000 kg - Electrical cabinet approx. 800 kg - Hydraulic unit, coolant tank, chip conveyor approx. 700 kg Dimensions - Length with chain drive (normal) 2950 mm Nsdpfx Ahsu A I Eljvokw with DC drive 3350 mm - Width: 3100 mm - Height Machine: 1980 mm Electrical cabinet approx.: 2200 mm Machine with DC drive approx.: 2150 mm

Condition: new, Year of construction: 2024, Panhans swivel milling machine type: 245/20 Solid German engineering Table milling machine with one-sided swiveling fixed milling spindle for the swivel range from -5° to +45.5° Positioning control for height and swivel adjustment with height zeroing and offset measurement travel Electronic position and speed displays 4 speeds 3000 / 4500 / 6000 / 9000 rpm Quick belt tensioning device Push button for spindle start and stop Left and right rotation Milling cutter quick clamping device Finely planed gray cast iron table with rigid frame support Lower control panel on rigid frame support Milling fence 216 total adjustment via handwheel and LCD display incl. cast fence plates and aluminum splitter tongues Machine socket Lockable main switch Nkedper Ig H Tefx Ahvew Mechanical motor brake Milling protection and pressure device GAMMA V 1629 Arc milling fence 1639 Tapoa Milling spindle 30 mm, non-replaceable CE-compliant GS tested Table size 1100 x 760 mm Table height 870 mm Milling spindle not exchangeable 30 mm Clamping height 140 mm Height adjustment 125 mm Suction nozzle 2 x Ø 120 mm Speed 3000 / 4500 / 6000 / 9000 rpm Color RAL 7035 light grey and RAL 5000 violet blue Net weight approx. 800 kg Equipment: Top control panel Swivel +-45 degrees Motor 7.5 Kw Centerx Extendable frame support Location: ex stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2007, Offset 5 color KBA Rapida 74-5 Year: 2007 Number of impressions (mio): 69 Machine control - ColorTronic - ErgoTronic Console - Lithec Feeder - Suction feeder table - Double sheet control Printing units - Number of printing unit(s): 5 - Straight machine - PWHA Semi Automatic Plate Change - Varidamp dampening - Automatic inking roller washing device Nkjdpfxeyibqfo Ahvsw - Automatic blanket washing device - Cooling system: Baldwin Balcontrol Delivery - Standard delivery - Non-Stop delivery - Powder spray: Weko AP232 Accessories - Compressed air compressor: Kaeser Max. output (s/h): 15000 Max. sheet size (mm): 605 x 740

Condition: new, maximum load weight: 27,500 kg, overall weight: 34,000 kg, axle configuration: 3 axles, Year of construction: 2025, Equipment: ABS, Reference vehicle (no stock) Semi-trailer roll-off tipper/hook lift e.g. 3-axle trailer in offset design for containers up to 8,000 mm possible Roller height from 1,080 mm Hookloader 25 t. to 30 t. design Hydraulic locking rapid traverse Radio remote control etc. Chassis available with self-steering axle Forced steering twin tires Nsdpfx Aevw Hk Sjhvokw etc. Optional equipment possible. The quoted price is for a base vehicle in 2-axle version. You can receive a suitable offer for your application on request. Further information on request

Condition: used, Just Normlicht Color-Control Professional ist ein Farbprüftisch für ein präzises Farbmanagement-System. Just Normlicht Color-Control Professional is a color testing table for a precise color management system. Farbprüftisch / Ink Proof Table Just Normlicht Color-Control Professional  Tischabmessungen / Table Sizes 940 x 680mm 5 Schubladen L/B/H 90 x 70 x 12cm / 5 drawers W/L/H 90 x 70 x 12cm Njdpfjyuzf Asx Ahvjkw Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Neue Farbübertragswalze, Neue Feuchtauftragswalze und Neue Feuchtdosierwalze New Ink Transfer Roller, New Dampening Form Roller and New  Dampening Roller Neue Farbübertragswalze, Neue Feuchtauftragswalze und Neue Feuchtdosierwalze für Heidelberg SM XL 105 New Ink Transfer Roller, New Dampening Form Roller and New  Dampening Roller for Heidelberg SM XL 105 0902004 A 1812 (x5) - Neue Farbübertragswalze / New Ink Transfer Roller - Sach Nr. F2.009.120F/07 - Kennz. ROT Nkodpfx Aeyuy Najhvew 0902014 A 1405 (x2) - Neue Feuchtauftragswalze / New Dampening Form Roller - Sach Nr. F2.030.301F/05 - Kennz. OHNE 0902014 A 1404 (x1) - Neue Feuchtauftragswalze / New Dampening Form Roller - Sach Nr. F2.030.301F/05 - Kennz. OHNE 0902014 A 1411 (x1) - Feuchtauftragswalze - Sach Nr. F2.030.301F/05 - Kennz. OHNE 0902012 A 1405 (x1) - Feuchtdosierwalze Pro Aqualis - Sach Nr. F2.030.510F/03 - Kennz. OHNE Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test