Used Offset for sale (719)

Condition: excellent (used), Year of construction: 1988, functionality: limited functionality, machine/vehicle number: 25.05.004, total length: 9,500 mm, total width: 2,250 mm, total height: 2,300 mm, input voltage: 380 V, power: 50 kW (67.98 HP), overall weight: 21,000 kg, empty load weight: 18,000 kg, compressed air connection: 7 bar, Equipment: documentation/manual, Paper size: 730 x 1060 mm, printing area: 710 x 1040 mm Paper thickness: 0.05 mm – 0.5 mm Preset maximum speed (due to simulation of the throw-off time for high-speed presses) is 4,000 sheets per hour, but the machine can operate much faster for commercial jobs. Four-fold central impression cylinder that prints all 4 colors in one gripper closure. 1988 FAG Speedproof with operator console for ink duct and cylinder adjustments, enabling extremely accurate register printing. Attached is the original factory brochure. The machine has been fully dry ice cleaned, and the cylinders are in excellent condition. Offered strictly on an 'as is, where is' basis. Fsdpfx Asuf Sy Aok Uopl Maximum width is 225 cm, maximum height is 230 cm; shipping in a High Cube container is possible. Price is absolutely fixed, based on the removal of easily separated parts which we could sell separately, such as the Mabeg feeder with vacuum belt delivery, and the four-fold Baldwin stainless steel unit—with each color having its own bath, a mixer, and adjustable temperature control, so all four baths can be set to different temperatures and alcohol concentrations. The machine was dry ice cleaned, and it was intended for prominent use in printing electronic paper. However, due to too many initial losses, the project was discontinued. The machine has been with us for 3 years and, due to its size, I want to sell it as quickly as possible. Hence this very low price. It is an excellent machine. If the machine needs to be set up for testing and sampling, this is possible at an additional cost of €10,000, of which €5,000 must be paid in advance as a deposit under agreed conditions. All relevant information can be found in the original FAG folder for the machine, available via this advertisement as a PDF. Technical Data - Printing size max.: 710 × 1040 mm (27.95 × 40.94 in.) - Paper size max.: 730 × 1060 mm (28.74 × 41.73 in.) - Paper size min.: 500 × 700 mm (19.68 × 27.56 in.) - Stock thickness: 0.05 – 0.5 mm (0.002 – 0.020 in.) - Plate size max.: 800 × 1080 mm (31.50 × 42.50 in.) - Plate thickness: 0.25 – 0.5 mm (0.010 – 0.020 in.) - Speed max.: 4,000 sheets/h - Floor space requirement (incl. access to feeder, delivery, and central control desk): 950 × 525 cm (374 × 206.69 in.) - Press height: 230 cm (90.55 in.) - Weight (including paper stacked in feeder and delivery): approx. 18,000 kg (approx. 39,690 lbs) - Total power requirements: approx. 50 kW - Compressed air supply: 6 – 7 bar

Condition: good (used), Year of construction: 1989, 2-color "straight" offset machine with low-stack explanation; 48x66cm, last modified type of this model (= best) Fpodpfx Astyqhqsk Uel

Condition: good (used), Year of construction: 1998, Heidelberg Autoplate (Automatic Plate Changing System) +Version Alcolor Dampening CP Tronic Control System Fodpfx Akjw U A Npo Uepl Automatic Ink Roller Washing Device Blanket Washing Device Impression Cylinder Washing Device Grafix Alphatronic 200: Powder Sprayer Condition: Cleaned

Condition: good (used), Year of construction: 2017, functionality: fully functional, Performance Package Speed: 18.000 s/h max. Watercooled Press PrinectPress Center XL 2 Control Station Wallscreen XL Touchscreen AutoPlate Pro: Fully Automatic Staggered Plate Change Prinect Inpress Control 2: Spectrophotometrically Inline Measurement System Perfetor Full Automatic (4-4/8-0) AirStar Pro: Central Air Supply Cabinet (Watercooled) Acoustic Package Sinus-Synchron Drive Scrollstar - Air Compressor Extended Delivery (X1) Energy saving system with automatic switching on/off of all drives Sheetfed Control Program-controlled Automatic Blanket Washup Devices for Blanket and Impression Cylinders Program-controlled Fully Automatic Inking unit Washup Device Powderstar AP 500 Duo CAN: Powdering System Feeder Touchdisplay CleanStar: Effectively Powder Emissions at delivery Non-stop Feeder Preset Plus Delivery Preset Plus Feeder: Fully Automatic Configuration of the Feeder Preset Air Transfer System Non-stop Delivery CombiStar Pro CAN (watercooled) Ink Temperature Control Hycolor Dampening System AirTransfer System (For Sheet Transfer) Dynamic Sheet Brake XL Sheet Feeder System InkStar CAN Staticstar Compact: Antistatic Device on Feeder & Delivery Fpodezxui Ispfx Ak Uol Electromechanical Stream Controls Pull Lay Control - Double Sheet Control Perfect Jackets Impression 225 mio.

Year of construction: 2001, operating hours: 126,000,000 h, condition: good (used), machine/vehicle number: 204750, Perfecting 2/2 - 4/0 Fpjdpfx Akjlml Nhe Uel CPC 1-04: Off Press Ink & Register Control Alcolor Dampening Semi Automatic Plate Change Grafix Alphatronic 200: Powder Sprayer Technotrans Cooling Device Automatic Ink Roller Washing Device Blanket Washing Device Staticstar Compact: Antistatic Device Impression Account: 126 Mio.

Condition: good (used), Year of construction: 2008, Straight Machine Fodpfx Ajy Hw A Nsk Uepl PQC-S Console PDCS II: Print Density Control KMS 4 - Komori Monitoring System KHS -AL: Pre-Inking System Skeleton Transfer Cylinders Komorimatic Dampening Unit FAPC: Fully Automatic Plate Change AMR (Automatic-Make-Ready) Automatic Impression Cylinder Washing Device Automatic Ink Roller Washing Device Automatic Blanket Washing Device Technotrans Beta C. Combi Ink Temperature Control Coating System Tresu with Doctor Chamber Blade Baldwin Graphiset GS4 IR Dryer Grafix Megatronic-S: Powder Sprayer Powder Exhauster Grafix Non-stop Delivery Watercooled Press Automatic Paper Size Adjustment Extended Delivery (2000mm) Impression Account: 150 Mio.

Condition: good (used), Year of construction: 2006, Skeleton Transfer Cylinders Komorimatic Dampening Unit PDCS II: Print Density Control KMS 4 - Komori Monitoring System PQC-S Console KHS -AL: Pre-Inking System AMR (Automatic-Make-Ready) FAPC: Fully Automatic Plate Change IR Dryer + Hot Air Dryer Fpjdpfx Asy Hwyuok Usl Coating System Tresu with Doctor Chamber Blade Impression Cylinder Washing Device Blanket Washing Device Ink Roller Washing Device Grafix: Powder Sprayer Raised Automatic Paper Size Adjustment Technotrans Alpha C. Refrigeration Ink. Temperature Control (Watercooled) Watercooled Press Extended Delivery Impression Account: 160 Mio.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, PDC-LITE II: Print Density Control PQC Console KPC: Semi Autmatic Plate Change AMR (Automatic-Make-Ready) Fedpfxjyubxie Ak Uspl Komorimatic Dampening Unit Technotrans Cooling Device Blanket Washing Device Impression Cylinder Washing Device Powder Sprayer Printing Thickness: 0,6mm Impression Account: 22 Mio.

Condition: used, Year of construction: 2014, YCM NSV 156A – Vertical Machining Center Vertical machining center with a 30-tool tool magazine, controlled in 3 axes with a Fanuc MXP-200FB control system. New Z-axis cover will be installed, 3400 cutting hours, standing under power. - Working range X/Y/Z: 1530 / 650 / 610 mm - Table surface: 1630 x 650 mm - Spindle taper: ISO 40 - Spindle motor: 22/7.5 kW (1 min/cont.) Included Optional Equipment - Spindle speed 12,000 rpm, BT40 Big Plus, 22/7.5 kW (1 min/cont.) - Tool changer/magazine for 30 tools, BT40 Big Plus Fpodszz Ad Sspfx Ak Ujl - Spindle chiller - High-lift chip conveyor, hinge-belt type - Full enclosure guarding with roof - Through-spindle coolant, 20 bar, via pull stud - Heavy-duty coolant pump, 3 bar - Coolant nozzles around the spindle - Chip flush-out - Oil skimmer - Automatic main power shutoff (M30) - M-code, 1 pair - Safety door - Foundation bolts - Tool length/diameter/breakage measurement (Renishaw TS-27R) - CE marked - Prepared for 4th axis Technical Specifications – YCM NSV156A Travel Travel X/Y/Z 1530 / 650 / 610 mm Spindle nose to table surface 80 – 690 mm Table Table surface1630 x 650 mm Number of T-slots, pitch6 x 18 x 100 mm Table load capacity1500 kg Table surface to floor 950 mm Spindle (tool standard MAS BT40 Big Plus)Speed, S5 12,000 rpm Max torque 127 Nm Feed Rates traverse X/Y/Z48 m/min Working feed X/Y/Z, max1 – 20,000 mm/min Motors Spindle (1 min/10 min/cont.)22.0 / 15.0 / 7.5 kW AC X-axis feed5.5 kW AC Y-axis feed5.5 kW AC Z-axis feed 5.5 kW AC Ball Screws X/Y/Z axis Ø 45 mm Tool Changer Number of tool positions 30 Changing system Random (tools swap positions) Tool standard MAS BT40 Big Plus Pull stud YCM Max tool length 300 mm Max tool diameter (all pockets occupied)76 mm Max tool diameter (with adjacent pockets empty)125 mm Max tool weight6 kg Machine Dimensions Height 3051 mm Floor space, approx.2770 x 3855 mm Weight, approx.10,000 kg Power requirement39.5 kVA Standard Equipment NSV 66A, NSV 85A, NSV 102A and NSV 156A, with Fanuc MXP200FB control system - Spindle motor Alpha T8i (22 kW / 1 min) - Speed 12,000 rpm, max torque 127 Nm - Spindle ISO 40 - Tool standard MAS BT40 Big Plus + YCM special pull stud - Spindle chiller - Chip augers, dual, on both sides of the table - Fully enclosed guarding with roof - CE marked - Fanuc MXP200FB control system with YCM software - PCMCIA card for easy program transfer and expanded memory - Memory 1280 m (512 kb) - 10.4" TFT color display with graphics - Manual Guide i – simplified menu-driven programming - AI Operation Plus - Helical interpolation - Tool offsets, total 200 - Coordinate systems: 48 - Synchronized (rigid) tapping - Macro B - Tool offset type C - High-speed function AI Nano CC - RS-232 interface

Condition: used, Year of construction: 2006, 38 Mio. prints approx. Format: 370×520 mm (14×20″) Easyplate CP-Tronic, Fedpfx Akozzwrdo Uopl Alcolor Streamfeeder Low-pile delivery Perfecting Powder sprayer Available: at short term

Condition: used, operating hours: 13,848 h, machine/vehicle number: SO139, Used Molding Machine MRT 3503 R for big container in HDPETechnical Specifications & Performance DataThe MRT 3503 R is a heavy-duty industrial forming system engineered for high-temperature plastic processing and container manufacturing (1.000/2.000/5.000L Tanks). The machine combines large-format capacity with controlled rotation on multiple axes to deliver consistent, repeatable forming quality.Model: MRT 3503 RSpherical diameter: 3500 mmMachine length: 14960 mmMachine width: 13026 mmMachine height: 5480 mmCarriages: 3Straight arm: 1Maximum load (straight arm): 2000 kgSecondary axis diameter (straight arm): 3250 mmOffset arm: AvailableMaximum load (offset arm): 1550 kgSecondary axis diameter (offset arm): 2900 mmPrimary axis revolutions: 0–8 rpmSecondary axis revolutions: 0–8 rpmBurner brand/model: WEISHAUPT WM-G10/2 A exec. ZM-LNDigital burner power (max): 630 kWBurner calibration power: 550 kWMaximum operating temperature: 300°CAlarm temperature: 340°CFuel type: Natural gas methaneAverage fuel consumption (continuous cycle):46 m³/hInstalled electrical power: 42 kWVoltage/Frequency: 400 V / 50 HzAverage electricity consumption (continuous cycle): 30–35 kW/hCompressed air: 2 lines, 6 bar max; 32000 Nl/hWater pressure: 2 barWater consumption (max): 4–6 l/minStructure finish: RAL 5002 / RAL 3020; Protections RAL 1023Arm surface finish: High-temperature silverAdvanced Automation & Control SystemsThe MRT 3503 R features precise rotational control with independently adjustable primary and secondary axes from 0 to 8 rpm for accurate thermal forming profiles. A digital WEISHAUPT burner package enables stable process temperatures up to 300°C, with an alarm setpoint at 340°C for enhanced protection. Electrical integration is standardized at 400 V, 50 Hz with 42 kW installed power for auxiliary systems. Operator safety is supported by guarded enclosures and compliance certification, while color-coded protections aid visual management. The controlled heating, rotation, and timing provide consistent part quality and predictable cycle times in industrial packaging applications.Production Line Integration CapabilitiesThis machine can operate as a standalone forming cell or be integrated into a broader production line with downstream trimming and quality checks. The generous envelope (3500 mm spherical diameter) and multiple carriages support high throughput configurations and flexible tooling strategies. I... Fedpoziyy Hefx Ak Uopl

Condition: used, Second-hand machine Features and technical specifications: Drilling unit comprising a drilling motor with a holder for threaded drill bits Fpedezk N Trjpfx Ak Ujl with the option to accommodate 6 drill bits in accordance with the drilling pattern of which 5 are for a row of holes spaced 32 mm apart and 1 is offset to the rear at a distance of 32 mm from the Row of holes, e.g. for Häfele Varianta with roller conveyors to the left and right of the drilling machine Availability: at short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 2018, Overview Fpodpfx Akezy Ud Is Uel This Krones Linatronic M is an empty bottle inspector for glass bottles, built in 2018. It inspects every empty container before filling and rejects any container that fails one of the inspection stages. The machine combines camera-based base, sealing surface, screw thread and sidewall inspection with high-frequency and infrared residual liquid and caustic detection. Two sidewall modules with four mirror assemblies and four cameras provide a compact full-front view of the container, and the DualFlash neck finish lighting inspects the outer and inner sealing surface separately using two minimally offset lighting angles. Foreign containers are identified at the machine infeed by height, contour and colour detection. Three Ecopush rejection points separate foreign, dirty and damaged containers. The machine is operated from a Krones iPanel CD terminal. Technical data - Manufacturer: Krones - Model: Linatronic M - Machine type: empty bottle inspector - Year of manufacture: 2018 - Application: inspection of empty bottles prior to filling; neck ring detection for returnable PET containers included - Inspection modules: base inspection, sealing surface inspection, screw thread inspection (cone optics), sidewall inspection - Sidewall inspection: 2 modules with 4 mirror assemblies and 4 cameras, two views per camera at 45° - Residual liquid and caustic detection: high frequency and infrared - Additional detection: polarising transparent films at container base and sidewall, glass fragments at the container base, scuffing via sidewall camera - Foreign bottle detection at the infeed: container height, contour and colour via camera - Rejection: 3 x Ecopush - foreign containers at the infeed, dirty containers and damaged containers at the discharge - Control: Krones iPanel CD operator terminal, prepared for data connection to a single-station PC (Datalyser) - Test bottle programme with 2D code - Conveyor height: 1,200 mm, adjustment range 1,155 - 1,315 mm - Minimum required room height: 2,810 mm - Overall dimensions: approx. 6,700 x 1,300 x H 2,800 mm - Direction of operation: right-left machine - Power supply: 400 / 230 V, 3/N/PE, 50 Hz, 6 A full load current, 20 A pre-fuse; auxiliary supply 230 V, 1/N/PE, 5 A - Standards: IEC 61439-1 / IEC 60204-1, CE marked - Machine base and housing: stainless steel (AISI 304 equivalent), clean design Equipment - DualFlash neck finish lighting, separate inspection of outer and inner sealing surface - Combined thread inspection via the sidewall mirror assembly - Fallen container detection in front of the machine (photoelectric sensors with infeed pusher) - Base blow-off unit with clocked air nozzle for foam and lubricant residues - Container blower at the infeed, conveyor dead plate (3-fold) - Servo-driven collection module for rejected containers at the discharge - Festo pneumatic system with maintenance unit, food-grade lubricants - Emergency mode: passage operation without inspection - OEM machine data sheet and dimension drawing Condition Used, technically complete. The machine is still installed and under power at its production site; the photographs show it in the installed state. Availability Immediately. The machine will be dismantled and relocated to Germany. Viewing by arrangement; dismantling, loading and transport can be quoted on request.

Year of construction: 2018, condition: used, x-travel 4000 mm y-travel 2000 mm z-travel mm 4000 bar total power requirement 35 kW weight of the machine ca. t dimensions of the machine ca. m MicroStep CNC water jet cutting system AquaCut-W 4001.20 with the following features: • BFT high pressure pump ECOTRON ® 40.37 • Desludging system (scraper conveyor) for a length of 4,000 mm • Water softening using water chemistry 1. MicroStep CNC guide machine AquaCut-W 4001.20 (4,000 x 2,000 mm} MicroStep® machine control with MML console and 24 "touchscreen Two LCD operating units on the portal Laser pointer with automatic offset transmission iMSNC® module / expert system iMSNC® module / assistant for service and maintenance work iMSNC® module / assistant for loading CNC programs iMSNC ® module / automatic calibration of mechanical scanning iMSNC® module / management of cutting programs (MRP} iMSNC® module / Ecolnfo iMSNC® module / machine info iMSNC® module / user management "AsperWin Basic" programming system for programming directly on the Machine control "AsperWin Select" macro library module Mod ul NC simulator "AsperWin NC-Sim" Fodpeg N Nlvsfx Ak Ujpl 2. USB 3.0 connection option for storage medium 3. Remote maintenance module MicroStep RemoteDiagnostics® Remote maintenance access through TeamViewer 4. Water jet cutting table with grate support / 4,000 x 2,000 mm Working area 5. Automatic height control for the water jet cutting head 6. BFT high pressure pump ECOTRON ® 40.37 7. Automatic pump control 8. Allfi® cutting head type IV (1 piece) 9. Allfi® abrasive head CENTERLINE type II "Long Life" (1 piece) 10. Allfi® abrasive dosing system 11. Allfi® abrasive conveyor system type II 12. Automatic abrasive dosing via the CNC control 13. High pressure installation material for connecting the high pressure pump to the existing water network 14. Error messages via SMS via the iMSNC control 15. GSM modem for the iMSNC control 16. Double-sided rope protection (collision protection) over the portal bridge Emergency stop switch 17. Desludging plant (scraper conveyor) for a length of 4,000 mm 18. Water stabilization by means of a metering device and addition of Water chemistry 19. Water chemistry WI N2054Si 20. CAM software "AsperWin Basic" for programming

Condition: used, Year of construction: 2007, bore capacity in steel (diameter) 40 mm arm length 1050 mm turning speeds 15 - 2800 U/min feed range 0,075 - 0,45 mm/min dimensions 2450 x 1300 x 2300 mm Weight 1500 kg Equipment: Machine in top condition 2026 serviced and repaired by the factory customer service Machine design - Work table 1800 x 600 mm with 4T-slots - Boom travel 1050 mm - SK 40 drilling spindle with tool clamping device - Infinitely variable speed programming - Infinitely variable quill feed via three-phase servo motor - 2 T-slots 18 mm on the machine base at the rear - 2 T-slots 18 mm on the left machine base frame - Thread cutting device - Central lubrication - Coolant device - Machine light - CE marking - Safety device - USB interface Dimensions and travels Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle bottom edge - min mm 70 Table top edge max. mm 680 Distance spindle bottom edge - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Worktable height mm 900 Cutting values Drilling capacity into solid St 60 ? 40 GG 22 ? 50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100 % ED. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 - 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7,5 / 7,5 / 5 Fjdpfxey Nd T Ho Ak Ujpl Rapid traverse speeds (W): m/min. 3 Feed rates stepless mm/min 5 - 2000 Accuracy Positioning accuracy X-, Y-axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 3 (X, Y, Z, ) Processor: 32-bit CPU Screen: TFT flat screen, backlit, easy to read from all sides readable from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental measurements, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Standard software options: Programming in dialog, 38 zero offsets, rotation and mirroring, teach-in for X,Y,Z, restart in program with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for by manually probing the workpiece for: - any clamped rectangular parts - any clamped round parts - Mediation of cast and flame-cut parts - Angular position detection for round parts by touching reference edges or surfaces Test graphic Graphic display of drilling patterns

Condition: new, square edge steel 16 x 16 mm flat steel 100 x 5 mm L-beam 60 x 8 mm round bar steel 18.0 mm weight of the machine ca. 33.0 kg Properties : - For precise cold and hot bending of flat, round and square steels - Sturdy design for bolting to the workbench - Infinitely adjustable bending stop with locking pin - With eccentric quick clamping for efficient working - Readable bending angle up to 120 - High repeat accuracy thanks to bending angle stop - Ideal for repair workshops and locksmiths - - - - - - - - - - Cold bending capacity Flat steel 100 x 5 mm 65 x 10 mm Round steel 18.0 mm Square steel 16 x 16 mm Angle steel 60 x 8 mm Bending capacity hot Flat steel 100 x 15 mm 75 x 20 mm Round steel 27.0 mm Square steel 25 x 25 mm Angle steel 100 x 12 mm - - - - - - - - - - Scope of delivery: - Bending plate sharp / round - Radius bending plate R 20 / R 25 - Offset block Fjdpfxoxcux Ro Ak Uopl - Bending plate for round bar - Offset plate - Radius bending plate R 10 / R 15 - Angle stop - Clamping block with eccentric clamp - Material stop

Condition: ready for operation (used), Year of construction: 2009, Pressing height 140 mm Pressing force 70 kN (7 t) Pneumatic drive Power supply 230 V, 1~, 50/60 Hz Compressed air supply 7 bar Air consumption per working cycle 35 l Fpodpfx Akezxc Rmj Uol Length 1,100 mm, depth 950 mm, height 1,230 mm, weight 545 kg For pressing profiles with large dimensions with the highest quality requirements The machine is easy to adjust and operate and has short changeover times thanks to a simple blade-changing system Extremely high pressing force due to large-volume bellows cylinder (maintenance free) With retractable, hydro-pneumatically controlled counter bearing The specially-designed counter bearing head allows pressing of frames with an inner dimension starting at 150 mm (clear dimension) The pressing depth can be set separately for each tool carriage An adjustable pressing blade is also available to compensate for the profile chamber offset (-5 to 15 mm as standard, 15 to 35 mm as an option) Support arms and pressing blades included as standard 2-hand operation

Condition: used, Year of construction: 2004, Offset 5 color with coating Roland 705/3B LV Year: 2004 Number of impressions (mio): 258 Machine control - RCI - RCI JobCard Feeder - Suction feeder table - Anti static device - Steel plate in feeder Printing units - Number of printing unit(s): 5 - Straight machine - APL but used as PPL Semi Automatic Plate Change - RolandMatic - Automatic inking roller washing device - Automatic blanket washing device - Automatic impression cylinder washing device - Dampening cooling and circulation system: Technotrans - AlcoSmart - Ink temperature control Coating - Number of coating unit(s): 1 - UV coating - Tresu chambered ductor blade system - Drying position possibilities: 3 positions( 1/2, 2/3 and after 5th) - Number of interdeck cassettes/lamps: 2 - UV interdeck dryer - UV dryer in delivery: 3 lamps - IR dryer in delivery: (Eltosch) Delivery - AirGlide Fjdpfxev Ewlvs Ak Uspl - Extended delivery - Powder spray: Grafix Cantronic 3000 - Compressed air compressor, excluded

Condition: good (used), Uchida Aero Cut One Creaser, Slitter, and Cutter The machine is fully operational and ready for production. Fodpozyz Dbjfx Ak Uspl Description: The AeroCut One cuts, perforates, and creases sheets in a single pass. Only one person is needed to operate the device, significantly improving work efficiency and, consequently, reducing costs. The device is programmed using an intuitive touchscreen control panel. Cutting, creasing, perforating Maximum paper size – 370 x 520 mm Min. paper capacity – 55 x 45 mm Maximum grammage – 400 g/m² Speed ​​– 11,130 business cards/h Paper types – offset, coated paper, varnished Feed – belt with adjustable vacuum Creasing – strip-type Memory – 263 programs + 150 user-defined Touchscreen programming PC connectivity Double-feed detection Weight: 240 kg Power supply: 230 V Made in Japan.

Condition: good (used), power: 5.5 kW (7.48 HP), For sale is a robust, combined jointer and thicknesser from Panhans, type 445. The machine has a planing width of 510 mm, a powerful 5.5 kW motor, and a motor brake. The complete cutterhead guard, including the support arm, has been replaced. Thanks to the segmented infeed roller, the machine is also well suited for simultaneously processing workpieces of different thicknesses or workpieces that are offset. Two rollers in the thickness table facilitate the feed, especially for heavy and long workpieces. Technical data and features: +Manufacturer: Panhans +Type: 445 +Combined jointer and thicknesser +Planing width: approx. 510 mm +Maximum thickness planing height: approx. 220 mm +Motor power: 5.5 kW +Operating voltage: 400 V +Cutterhead speed: approx. 5,000 rpm +Jointer table length: approx. 2,050 mm +Two feed speeds: approx. 7 and 14 m/min +Jointer fence can be swiveled up to 45° Fpodpfx Akozz Niuj Uel +Motor brake +Segmented steel infeed roller +Two rollers in the thickness table +New cutterhead guard, including a new support arm +Dust extraction connection: approx. 160 mm +Solid and durable industrial machine +Weight: approx. 1,000 kg A solid and heavy Panhans machine with a large 510 mm planing width – ideal for carpentry shops, joineries, and professional use. Inspection and a test run are possible by prior appointment.

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, machine/vehicle number: AF6-A7L, conveyor belt width: 600 mm, total length: 2,490 mm, total width: 600 mm, total height: 400,500 mm, overall weight: 500 kg, inner radius: 200 mm, outer radius: 1,200 mm, motor manufacturer: ohne, Equipment: documentation/manual, type plate available, Conveyor belt / transfer system, "S-version". Belt width 600 mm, S-offset 2000 mm. Fpodpfjzp Hi Uox Ak Uel Unused (new) and without an attachment gearbox. Please contact us to discuss pricing.

Condition: used, mileage: 114,987 km, power: 375 kW (509.86 HP), first registration: 01/2023, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 01/2027, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, navigation system, parking heater, Tachograph version 4.1, rolling lock MAN EasyStart, ASR, ESP, lane return assist LRA, EBS, LED lighting, electric parking climate control, attention warning, preparation for reversing camera, retarder Eco Cool, full brake assist, without reversing warning, 2kg fire extinguisher, MAN mediasystem Navigation Advanced 7'', navigation map Europe and Russia, attention warning system MAN Attention Guard, RIO Box, JOST JSK 42 K0 2 fifth wheel coupling, 150 mm mounting height, 575 mm fifth wheel offset Fodpomhc I Rofx Ak Uepl

Condition: used, Year of construction: 2000, Format: 370 x 520 mm Equipment: Alcolor Automatic film dampening Autoplate: semi-automatic plate change system Fpsdpfxjzzzt Se Ak Uel All manuals, tools, accessories Technical details: Maximum sheet size: 370 x 520 m Paper thickness range: 0,03 - 0,5 mm - Max. speed Plusversion

Condition: used, power: 140 kW (190.35 HP), Year of construction: 2013, CAT 328 D (328 DLCR ZTAL) Tunnel Excavator Fpodpfjwmpcuex Ak Ujl Many additional parts available for an extra charge, e.g., a complete upper carriage, etc.! • Power: 140 kW (190 hp) • Articulated/offset boom for tunneling applications • Quick coupler system • Blade support • Air conditioning • Short tail swing version • 11,600 operating hours • 600 mm track width • Includes 1 x 1.3 m³ digging bucket and 1 x ripper • Excavation depth: approx. 7 m • Unladen weight: 43,500 kg - German machine! - Fully functional! - All maintenance carried out by Zeppelin / Caterpillar Errors and prior sale excepted! = Additional information = Year of manufacture: 2013 Damage: none

Condition: new, For processing all common aluminum window profile systems such as Schüco, Hueck, Heroal, Reynolds, etc. Fedpfxshmfyho Ak Uepl Universally applicable due to the double-adjustable punching tools. For corner angles with a groove dimension of 25 - 60 mm and profile chamber offset of 0 – 40 mm. Infinitely adjustable buttons, punching blades, and stop inserts in height. Buttons and punching tools are marked with scales. Retractable stop for easy insertion of the profiles, with automatic adjustment when moving towards the profile. Hydraulic stop locking mechanism. Pneumatic pressing process via a lever system, ensuring a synchronous punching process. 2 pneumatic clamping cylinders for tensioning the profiles. 2 eccentric disks for positioning the frames. 2 pivoting profile support arms. Operation via 2 foot valves. Includes standard tools.