Used Numbering Unit for sale (50,040)

Condition: good (used), 18 x double and 10 x triple lockers – used - : Prices ex location: only €75 (net) / unit! Dkjdpfoyhxpcsx Ac Nsh Manufacturer: Model: Year of manufacture: unknown Width of triple unit: approx. 90cm Depth: approx. 50cm Height: approx. 1.85m Condition: good Available: immediately Location: Waltrop warehouse

Condition: used, mileage: 385,300 km, power: 353 kW (479.95 HP), first registration: 08/2015, fuel type: diesel, empty load weight: 7,550 kg, maximum load weight: 12,950 kg, overall weight: 20,500 kg, tire size: 315/70R22,5 156/- L, axle configuration: 2 axles, fuel: diesel, color: other, driver cabin: other, gearing type: mechanical, emission class: euro6, suspension: steel-air, front tire size: 315/70R22,5 156/- L, rear tire size: 315/70R22,5 -/150L, Equipment: ABS, air conditioning, all wheel drive, cruise control, navigation system, , -- Misprints, errors and omissions excepted, sample pictures --, More details under: !, More Details: ! Dsdeyhrywspfx Ac Nokh

Condition: used, Hydraulic feed gearbox suitable for Harbs woodworking machines or similar. Dkjdpswktmrefx Ac Neh The gearbox enables manual, infinitely variable adjustment of the feed or transmission speed.

Condition: used, Pressure: 100 bar Capacity: 2 L Dkjdpewdun Dsfx Ac Njh Motor: 0.75 kW

Condition: used, Motor: 1.5 kW Dkodpfswdum Tjx Ac Njh Operating pressure: 70 bar

Condition: used, Power source for orbital welding machine MESSER GRIESHEIM - POLYSOUDE PS204 Water cooler for orbital welding machine MESSER GRIESHEIM - POLYSOUDE RC200 Welding power source, inverter welding unit POLYSOUDE PS 204 + RC 200 Year of manufacture: 1996 Serial number welding source: 9785153 Serial number cooling unit: 968628 Output: 200 amps = 20% duty cycle 90 amps = 100% duty cycle Mains connection: 230 volts, 50 Hz, Schuko plug - Note: Display on the power source becomes illegible after some time - Remote control cable type BP 1436 with 7.5 meter connection cable Djdpfx Acoyhq A Re Nekh - Adjustable output from 1 to 200 amps - DC only - HF ignition - Cooling water unit for torch cooling - 118,643 operating hours (read off) - Operating and maintenance manual Space requirement welding machine (L x W x H): 550 x 360 x 500 mm Space requirement cooling unit (L x W x H): 550 x 360 x 550 mm Weight welding machine: 45 kg Weight cooling unit: 25 kg Good condition Note: Display on power source becomes illegible after some time Without accessories Price applies to one set consisting of 1x power source and 1x water cooler.

Condition: used, Hydr. flat form scissor lift table FLEXLIFT FLUNDER type 1500 / 100 (without hydraulic unit) Year of manufacture 1991 Nominal lifting capacity 1500 kg Lifting capacity (practically tested) 1000 kg (at approx. 350 bar) platform size 2100 x 1400 mm stroke max. 930 mm Overall height - bottom 100 mm (with mounting frame) Overall height - top 1030 mm Hydr. operating pressure 350 bar = lifting force 1000 kg Dkjdel Nbqcopfx Ac Njh Motor power of hydraulics 1,5 kW mains connection 400 Volt, 50 Hz - mechanical-hydraulic safety limit switches stop the lowering process when the safety bar is actuated - without hydraulic power unit - without electric control length of installation frame 2270 mm width of mounting frame 1580 mm height of mounting frame = height at bottom 100 mm dead weight of lifting table 500 kg good condition

Condition: used, Micro welding head unit, spot welding system with welding head, inverter power source, I/O module, welding inverter MIYACHI PECO / AMADA WELD TECH GmbH Type ISQ20 Kompakt ISQ-AC/DC-AWS-EXT-250A 22KVA + PECO F160S Year of manufacture: 2011 The system consists of the following components: - Welding inverter MIYACHI PECO Type ISQ20 Kompakt ISQ-AC/DC-AWS-EXT-250A 22KVA with MFT1 control panel - External welding transformer MIYACHI PECO (mounted on the welding head frame) - External interface module MIYACHI PECO Type ISQ-MG - Spot welding head MIYACHI PECO Type F160S – 25 mm stroke with Heidenhain measurement system - Connection cables Mains voltage: 3x 400 V AC Mains frequency: 50 / 60 Hz Connected load: 22 KVA Welding current types: AC / DC Output current: max. 10 kA Output frequency: 1 - 10 kHz Welding time: max. 640 ms/pulse Current measurement: external toroidal coil Control panel: MFT1 (independent removable control unit) Analog input: pressure sensor for proportional valve Analog output: proportional valve control Interface: RS232 Protection class: IP30 - Error monitoring and process control - Monitoring of current, voltage, power, energy - Test pulse for part recognition - Program memory for 99 programs Inverter dimensions (W x H x D): 216 x 420 x 560 mm Inverter weight: approx. 21 kg Spot welding head MIYACHI PECO F160S Rated current: max. 5 kA Electrode stroke: 25 mm Closing stroke: pneumatic - Adjustable force ignition from 1.2 to 550 N - Heidenhain distance measuring system Djdpfx Acopy Uzyo Nskh Welding unit with 5 pneumatic cylinders and Festo valve terminal Type CPX Welding head mounted on horizontal guide rail and can be moved 20 mm via pneumatic cylinder. 3 pneumatic cylinders available for workpiece clamping (2 units with 46 mm stroke, 1 unit with 20 mm stroke). Throat depth (distance from welding tip to frame): 300 mm Welding tip height above floor: 315 mm Welding unit dimensions (W x H x D): 410 x 760 x 700 mm Welding unit weight: 75 kg Total weight: 100 kg 2 nearly identical units available, price per complete unit.

Condition: excellent (used), CATALOG NUMBER: 6145 TECHNICAL DATA - Maximum workpiece width: 1100 mm - Maximum workpiece height: 140 mm 3 units: 1) Calibrating grooved rubber roller – 15 kW 2) Calibrating grooved rubber roller – 11 kW 3) Calibrating grooved rubber roller – 11 kW From above: - Sliding metal roller - Sliding rubber roller - Unit - 2 sliding rubber rollers - Unit - 2 sliding rubber rollers - Unit - Sliding rubber roller From below: - Infeed table: 3600 x 1000 mm - Feed speed regulated via inverter 0.25 kW - Traction belt - 3 ejection sliding rubber rollers - Pneumatic belt oscillation with photocell control - Belt blowing - Electric table elevation adjustment – lifting motor 0.75 kW - Smooth feed speed control – feed motor 2.2 kW - With vacuum pump – pump motor 4 kW - Extraction port diameter: 110 mm, 80 mm - Operating pressure: 6-8 bar - Extraction connector diameters: 3×150 mm, 3×200 mm - Overall machine dimensions (LxWxH): 3400 x 2300 x 2800 mm - Feeder dimensions (LxWxH): 3000 x 1300 x 900 mm - Pump dimensions (LxWxH): 600 x 950 x 940 mm Dkedpox Rdf Sjfx Ac Noh - Weight: approx. 5000 kg Net price: 39,900 PLN Net price: 9,500 EUR (depending on exchange rate of 4.2 EUR) (Prices may vary with greater fluctuations)

Condition: refurbished (used), Overhauled 3-stage bevel-helical gearbox FLENDER, Model: KZA 360, P = 194 kW, n1 = 1,500 rpm, n2 = 60 rpm Dksdpfx Aoyhngtsc Nsh

Condition: used, Shredder, Erdwich M700/1-600, used machine Manufacturer: Erdwich Dksdpfx Acex I Dmws Neh Type: M700/1-600 Year: 2013 Power: 2 × 22 kW Overall dimensions: 1750 × 1820 × 1810 mm Weight: approx. 3,500 kg Hopper size: 650 × 580 mm × 2

Condition: used, mileage: 158,096 km, power: 346 kW (470.43 HP), first registration: 10/2022, fuel type: diesel, empty load weight: 7,645 kg, overall weight: 21,000 kg, axle configuration: 2 axles, next inspection (TÜV): 10/2026, brakes: retarder, gearing type: automatic, emission class: euro6, suspension: steel-air, front tire size: 315/80R22,5, rear tire size: 315/8022,5, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cabin, central locking, compressed air brake, cruise control, differential lock, fog lights, navigation system, onboard computer, parking heater, soot filter, truck registration, | MAN TGS 18.470 Hydrodrive | Adaptive cruise control, lane-keep assist, emergency braking assist | Euro 6, navigation, retarder | Refrigerator, sunroof | Automatic transmission, rear axle differential lock | Multifunction steering wheel, cruise control | Air conditioning, heated seats, auxiliary heater | Electric windows, electric mirrors | Tipping hydraulics | On-board computer | Construction-site tires, 315/80R22.5 | Input errors, mistakes and prior sale reserved Dkedpfx Acoyhfmws Noh

Condition: used, Largest tool diameter: 300 mm Smallest tool diameter: 80 mm Grinding wheel diameter max.: 225 mm Tool width max.: 230 mm Knife grinding machine Weinig Rondamat 929 for the production of profile knives. Dksdpfx Ajlf H Tgsc Njh Manufacturing from a straight blank or regrinding of used knives using a template. - Includes new coolant pump.

Condition: used, Vibratory bowl feeder / Sorting unit / Bowl feeder / Vibratory feeder RNA Vibrating bowl, sorting unit / Screw feeding with vibratory feeder for screwdriving technology Feeding system, feeder unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Serial no.: Year of manufacture: approx. 2000 Dodpfx Acjuzn Nns Nekh Bowl diameter bottom: 300 mm Bowl diameter top: 350 mm Bowl inner height: approx. 25 mm Sorting track width: approx. 30 mm Overall height (drive + bowl with sorting track): 380 mm Vibration frequency: 100 Hz / 6000 rpm Mains connection: 230 Volt, 50 Hz - The feeder was used for supplying automotive blade fuses Space requirements: Ø x H: 420 x 390 mm Weight of bowl feeder: 52 kg Linear feeder / Vibratory feeder / Sorting unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SLL 400-400 Serial no. 00835 Year of manufacture: approx. 2000 Maximum rail length: 700 mm Useful load: approx. 1.5 to 2 kg Vibration frequency: 100 Hz / 6000 rpm Mains connection: 220 Volt, 50 Hz - Oscillating plate L x W x H 400 x 65 x 12 mm - Mounted track length 530 mm - Overall height with oscillating plate 145 mm Space requirements: L x W x H: 580 x 120 x 400 mm Weight of linear feeder: 20 kg Control unit for vibration drives, control device, regulator, controller for vibratory feeders / sorting unit / bowl feeder / vibrating bowl / vibratory conveyor Manufacturer: RNA Rhein-Nadel Automation GmbH Type: ESK-N80 / ESG 90 Mains connection: 0 ... 208 V eff (230VAC motor operation) at 230V mains 0 ... 98 V eff (115VAC motor operation) at 115V mains Output voltage: 0...208 V (eff.) adjustable, (230 V mains) Number of power outputs: 2 Output 1: Bowl feeder, linear feeder max. 10A adjustable Output 2: Bowl feeder, linear feeder max. 6A adjustable Total load current: 16 A eff Sensor inputs: 1 Number of enable inputs: 1 (24V DC) Sensor supply: 24V DC, max. 60 mA Sensor delay ON: 0 ... 8 sec. Sensor delay OFF: 0 ... 8 sec. Power output connection: Hirschmann 7-pin - Two power outputs - Sensor amplifier with independently adjustable time stages (on/off) - Soft start (internally adjustable) - External enable input 24VDC Space requirements: L x W x H: 260 x 190 x 140 mm Weight of controller: 3.6 kg All units tested and in good condition.

Year of construction: 2004, condition: good (used), Laservall KUBO100 Tempering Unit (2004) The Laservall KUBO100 is a compact, fiber-delivered pulsed Nd:YAG welding system often utilized for precision laser welding and micro-welding applications. It is frequently featured as part of the Master Kubo Series from Laservall S.P.A. (Italy), designed for high-precision manufacturing, often in industrial settings. 1. System Type: Pulsed Nd:YAG laser welding system (sometimes referred to as a welding microscope or workstation). 2. Applications: Ideal for precision welding, micro-welding, and repairing, often used on mold tools. 3. Key Features: Offers high-precision welding capability, often integrated with a microscope for detailed work. 4. Manufacturer: Laservall (Italy). 5. Model Variants: Units often feature 2004 or 2009 manufacturing dates in second-hand markets. It is important to differentiate the KUBO 100 welding system from similar names, as some listings in industrial marketplaces may confuse it with a Dkodpfxeu Aqr Ie Ac Nsh "tempering unit" or cooling accessory, but the primary identification is as a specialized welding

Condition: new, Clean Air Filter Type: Power Unit 300 P Offer Type: New Machine Dodpfohfmpxox Ac Nokh Technical Specifications: Motor Power: 7.5 kW / 3-Phase / 400 V / 50 Hz Intake Port: NW 300 mm Nominal Flow Rate: 5,089 m³/h Max. Flow Rate: 6,000 m³/h Valve Pressure at Vnom: 2,434 Pa Filter Area: 30 m² Compressed Air Cleaning Incl. Integrated Pre-Separator Incl. Integrated Automatic Extinguishing System Chip Collection Volume: 3 x 250 l Sound Pressure Level: 71 dB(A) Incl. Dust Partition Dimensions L x W x H = 3,000 x 1,058 x 2,361 mm Weight: 838 kg

Condition: used, Technical details: weight of the machine ca.: Auf Anfrage t Container 20 feet with each 4 pc refrigerating compressors Djdpfx Acsu N Ahhs Njkh *

Condition: used, Year of construction: 2015, operating hours: 10,680 h, machine/vehicle number: IntNr231480, CNC Swiss-Type Lathe Citizen A32 (A232-VIIPL) Year of Manufacture: 2015 Control System: Cincom Mitsubishi Meldas M70 TECHNICAL DATA Number of axes: 7 Number of spindles: 2 MAIN SPINDLE Maximum bar diameter: 32 mm Maximum machining length: 320 mm Travel: 325 mm Spindle speed: 200 – 8,000 rpm Spindle drive power: 5.5 / 7.5 kW Minimum C-axis resolution: 0.001° SUB SPINDLE Maximum bar diameter: 32 mm Z-axis travel: 290 mm X-axis travel: 370 mm Spindle speed: 200 – 8,000 rpm Spindle drive power: 2.7 / 3.7 kW Dedpfxjyg Nq Dj Ac Nskh Minimum C-axis resolution: 0.001° Driven tools for rear-side machining ACCESSORIES Instruction manuals and documentation Parts conveyor belt LNS chip conveyor Bar feeder FMB Turbo 3-36 / 3200 WEIGHT AND DIMENSIONS Footprint (L×W×H): 2,520 × 1,300 × 2,229 mm Machine weight: approx. 3,500 kg The machine can be inspected by appointment. Technical data and information are subject to change and error. Prior sale reserved.

Condition: used, mileage: 1,192,657 km, power: 412 kW (560.16 HP), first registration: 01/2016, fuel type: diesel, empty load weight: 8,156 kg, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: intarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, number of beds: 2, front tire size: 315/70 R22.5, rear tire size: 315/70 R22.5, number of seats: 2, Equipment: ABS, air conditioning, central locking, compressed air brake, cruise control, differential lock, onboard computer, parking heater, spoiler, truck registration, MAN TGX 18.560 XXL cab – full air suspension | automatic, Euro 6 | emergency brake assist, lane-keeping assist | air conditioning, stationary air conditioning | cruise control, radio/CD | roof spoiler | differential lock | retarder | tires front axle: 315/70 R22.5, rear axle: 315/70 R22.5 | Subject to errors, input mistakes and prior sale. Dsdpfxoyg Nf Io Ac Nskh

Condition: excellent (used), Catalogue number: 7883 TECHNICAL DATA - Max main saw blade diameter: 350mm - Max main blade diameter without scoring unit: 400mm - Max cutting height with 350mm blade: 80mm - Max cutting height with 400mm blade: 100mm - Main blade adjustable up/down - Spindle diameter: 30mm - Spindle lock - With sliding table - Cutting length on table: 2260mm - Cutting width at fence: 850mm - With side table - Main motor power: 5.5kW - Scoring unit motor: 0.75kW - Scoring blade diameter: 100mm - 4 cutting speeds: 4000/5000/6000/7500rpm - Extraction port diameter: 80mm, 120mm - Blade guard included - Dimensions (LxWxH): 2260x2900x1500mm – Weight: 722kg ADVANTAGES – Made in Germany – With scoring unit – Used saw, in very good condition Dkodpoyg Ibnofx Ac Noh Net price: 8,900 PLN Net price: 2,120 EUR based on 4.2 EUR rate (Prices may vary with significant fluctuations)

Condition: new, CATALOG NUMBER HL001 - New machine, in stock – Pre-milling unit – Radial scraper + polishers TECHNICAL DATA - Panel thickness: 45mm - Edge thickness: 0.4 mm – 3 mm - Min panel width: 90mm - Min panel length: 90mm - Feed speed: 7m/min - Pre-milling: 9000 rpm - Top/bottom: 10500 rpm - Front/back: 8800 rpm - Polishing: 2800 rpm - Main motor: 6kW - Feed power: 0.75kW - Pre-milling power: 1.5kW - Glue spindle power: 0.25kW - Top-bottom milling power: 0.18kW - Top milling power: 0.55kW - Top polishing motor: 3-phase 0.12 kW, 1-phase 0.18 kW - Bottom polishing motor: 3-phase 0.12 kW, 1-phase 0.18 kW Dkjdpfx Aeyg Ecvoc Neh - Working table height: 856mm, extended support width: 560mm - Extraction connection: 3x100mm - Dimensions (L/W/H): 3200/1200/1200mm, weight: 660kg Net price: 49,900 PLN Net price: 11,880 EUR based on 4.2 EUR exchange rate (Prices may change with significant fluctuations)

Condition: used, machine/vehicle number: 006835, Type of edging: Thin edge, Thick edge Trimming Unit: yes Max Panel Length: 55 mm Dsdpjrl Utbefx Ac Nokh

Condition: used, mileage: 197,218 km, power: 471 kW (640.38 HP), first registration: 07/2021, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 12/2026, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2021, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN TGX 18.640 LL SA "INDIVIDUAL LION" First registration: 07/2021 Mileage: 197,218 km Engine: D38 with 15-litre displacement and 471 kW / 640 hp GX cab, 1 bunk, electric glass sunroof, 12.3-inch Professional multifunction instrument cluster, driver door control panel with 4 functions, seats in ALCANTARA/leather, comfort driver‘s seat with seat heating and ventilation, passenger seat Vario/swivel, rain sensor, light sensor with high beam assistant, Climatronic air conditioning, auxiliary water heater, auxiliary air conditioning, tinted windows, LED headlights, LED fog lights, LED cornering lights, LED taillights, 2x air horns, STABO CB radio, extra thermal and acoustic cab insulation, fridge under the bunk, truck navigation, MAN sound system with subwoofer, smartphone integration, 220-volt outlet in cab INDIVIDUAL LION: Cab rear wall storage unit with 3 compartments Safety package lighting & visibility Comfort package driver assistance package Interior lighting package Plus Storage package LightFix stainless steel roof bar with 4x LED long-range spotlights MAN TipMatic 14.27 DD with Idle Speed Driving software, rocking function, EfficiencyPlus Retarder + high-performance engine brake MAN EVBec Full air suspension AGM super long-life batteries Wheelbase: 3,600 mm Aluminium diesel tanks: 580 litres (right) + 480 litres (left) Tyres: Front axle: 385/65 R 22.5 Dkedsx Egfbopfx Ac Nsh Rear axle: 315/70 R 22.5 Fifth wheel height approx. 1,170 mm ALCOA high-gloss Dura-Bright aluminium wheels "RENTING is the new BUYING – with us also available immediately on full-service lease!"

Year of construction: 2011, condition: ready for operation (used), functionality: fully functional, saw blade diameter: 350 mm, workpiece length (max.): 6,000 mm, workpiece width (max.): 60 mm, workpiece height (max.): 15 mm, TECHNICAL DETAILS Max. workpiece width: 60 mm Max. workpiece height: 15 mm Max. workpiece length: 6,000 mm Drilling diameter: 16 mm Saw blade diameter: 350 mm Infeed roller length: 10,000 mm Thread cutting: M12 MACHINE DETAILS Dkjdpfjygw Ttex Ac Neh Total power requirement: 15 kW Dimensions & Weight Required space: approx. 12.0 x 2.0 x 2.3 m Machine weight: approx. 3.2 t EQUIPMENT Saw 4 x top drilling units 4 x bottom drilling units 6 x drilling and threading units 2 x countersinking units

Condition: excellent (used), Year of construction: 2011, \- temperence 20-90°C \- 180 l/min.; 3,5 bar \- 120kW \- 13,6 kW (12kW ) \- weight 120 kg/per piece Dkjdequupaepfx Ac Njh