3-stage plug-in bevel helical gear unit

Flender KZA 360

Condition: used, Gearbox, bevel gear, worm gear -Gearbox: Ratio: i = 1:30 -Shafts: Ø 19 x 50 mm / Ø 28 x 60 mm -Dimensions: 150/145/H175 mm -Weight: 5.1 kg Ledpfx Ahet Snwxjvsri

Condition: good (used), Open-end wrenches, ring wrenches as remaining stock -Open-end/ring wrenches: various sizes, with transport case -Weight of tool: approx. 400 kg Manufacturer: various brand manufacturers, see photos -Submission/Price: complete Lodpjx Swarjfx Ahvori -Transport box: 1200/810/H350 mm Total weight: 466 kg

Condition: good (used), Year of construction: 1954, Ref. -No.: 10576 Manufacturer: VDF WOHLENBERG Type: VDF Year of construction: 1954 Type of control: Konventionell Ledpfx Ajxmd U Aehveri Control: n/a Storage location: Halberstadt Country of origin: Germany Machine-No.: 27XXX Turning Length: 4000 mm Spindle Diameter: Ø 80 mm Faceplate Speeds I: 355 RPM Turning diameter over cross slide: Ø 1000 mm Max. Turning diameter: Ø 1250 mm

Condition: reconditioned (used), Year of construction: 1987, Universal Tool Milling Machine Manufacturer: DECKEL Model: FP 2 Aktiv Year of manufacture: 1987 – overhauled, newly painted with new machine electrics RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Machine no.: 2202-11579 Milling head type: 2271 Milling head no.: 300-3606 with warranty Ljdpfox A Eddjx Ahvori Geometric acceptance with inspection report Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 - Fixed table 660 x 380 mm (T-slot: 12 mm) - Vertical milling head SK 40 with drawbar thread S 20 x 2 - Central lubrication, hand-operated - Coolant system - Operating manual - used, as seen -

Condition: reconditioned (used), Year of construction: 1956, Lead and Feed Screw Lathe WEIPERT Year of manufacture: 1956 Spindle bore: 90 mm Centre distance: 3000 mm Swing over bed: 800 mm Swing over cross slide: 610 mm Swing in gap: 1120 mm Speed range: 7.5 – 475 rpm Comes with the following accessories: Multifix toolholder with 11 inserts Coolant system 3-jaw chuck 315 mm 3-jaw chuck 400 mm 3-jaw chuck 500 mm Faceplate 400 mm Faceplate 800 mm Faceplate 1000 mm Travelling steady Lodew Ew D Depfx Ahvjri Various turning tools (30 insert tools) 2 revolving centres 1 drill chuck Operating manual

Condition: excellent (used), Year of construction: 2002, Control: 3-axis active path control, Heidenhain TNC 123 Spindle speed: 40 - 2000 rpm, geometrically stepped direct drive with 16 gear stages for maximum torque / milling performance Feed rate: 5 to 500 mm/min, infinitely variable Lrjdpfx Asyg I Nfehvoi Rapid traverse: 1.2 m/min Quill: Extendable vertical quill, 60 mm, SK40 M16 draw thread Axes X/Y/Z: 300/160/340 mm Swivel table: 600 x 210 mm, max. load 200 kg

Condition: used, Technical details: z-travel: 400 mm range of revolution per miute: max. 3.000 / steples U/min feed continuous: keine Angaben quill stroke vertical: 100 mm spindle taper: MK2 table surface area: 445 x 315 mm Ledpfx Aev A S Efohvsri distance table - lower edge spindle: max. 520 mm table travel: längs: 250 mm table travel: quer: 330 mm table height over floor: 920 mm total power requirement: 1,6 kW weight of the machine ca.: 1500 kg machine dimensions LxWxH: 1,3 x 1,1 x 2,0 m Application: Milling and drilling slotted holes There is a precision dial gauge for depth display on the drill spindle head. 5x T-slots to DIN 650: a=10; h=18; b=18; c=8mm Features: Two-way digital ACU-RIDE display *

Condition: good (used), Year of construction: 1957, Ref. -No.: 10573 Manufacturer: VDF Type: W 40 Year of construction: 1957 Type of control: Konventionell Storage location: Halberstadt Country of origin: Germany Lrjdpfxoxmd Upo Ahvoi Machine-No.: 030XXXX Turning Diameter: Ø 960 mm Turning Length: 4500 mm Spindle Speeds: Ø 105 RPM Turning diameter over cross slide: Ø 600 mm Further information: The machine can be viewed under power by arrangement.

Condition: good (used), Spindle diameter: 75 mm Spindle taper: MK 5 Table clamping area: 900 x 710 mm Travel ranges: X-axis (transverse) 850 mm Y-axis (vertical) 750 mm Z-axis (longitudinal) 1050 mm W-axis (quill) 600 mm B-axis (table): 360° Table load capacity: approx. 3,500 kg Speed range, stepless: 20 - 1,500 rpm Feed range: yes Rapid traverse: yes Drive power: 12 kW Dimensions (L x W x H): 3950 x 2200 x 2200 mm Weight: 5,800 kg Accessories / Special Features: • 3-axis digital readout, brand FAGOR • Complete machine control via swivel-mounted control pendant • Machine bed cast in one piece • Spindle speed, stepless adjustable via rotary potentiometer • Feed + rapid traverse • Coolant pump • Emergency stop switch Including additional spindle adapter DIN 55027 size 8 on the boring spindle, e.g., for mounting a 3-jaw chuck or faceplate. Lredpfoxtu D Ujx Ahvji At the end of the machine bed, a table guide with drive is mounted for attaching a tailstock. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 1970, ja weight of the machine ca. 9,5 t serial number 10457/2 160000 KG stroke of worktool slide 41 Hub/min +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Lrjdpfx Ahsvvx Exsvji Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++