Used Multi Spindel for sale (5,058)

Condition: new, maximum load weight: 33,190 kg, overall weight: 42,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment features. Full equipment details available upon request. Frame: * Standard ladder-type frame in lightweight steel construction with through-bolted crossmembers * With pre-cambered chassis frame * Coupling plate approx. 8 mm thick, fitted with a 2-inch fifth wheel king pin according to DIN 74080 / ISO 337 Chassis: * An increase in the total gross train weight is permitted for indivisible loads * Axle lift mechanism on axle 1, lift control fully automatic, load-dependent * Make of your choice, Kögel recommended * Tri-axle assembly with disc brakes Ø approx. 430 mm, offset approx. 120 mm * Air suspension with approx. 180 mm travel Vehicle Tyres: * Wheels with built-in sensors compliant with UN ECE R141 * Sixfold 385/65 R 22.5 UNIROYAL TH 506 tyres on 22.5 x 11.75 steel rims, offset approx. 120 mm (ET 120) Chassis Attachments: * Landing gear (make of your choice from Kögel), mechanical with compensating foot, approx. 24 t lifting capacity. Single-side operation, located on the right in the driving direction * Spray suppression system according to Regulation (EU) No. 109/2011 * 1 pair of quarter-circle mudguards in front of the axles * 1 pair of straight mudguards with mud flaps between the 1st and 2nd axle * 1 pair of quarter-circle mudguards with mud flaps behind the axles * 2 wheel chocks with brackets * Side underrun protection according to ECE-R732 * Waterproof plastic toolboxes, dimensions (internal) approx. 545 x 400 x 400 mm. Mounted at the rear, 1 left, 1 right * Rear right access ladder, extendable; high, rigid steel rear underrun protection according to ECE-R58 * 1 pair each of extendable warning panels for oversize loads, retroreflective red/white, with LED lighting, spiral cable, and connector. Arranged at the front and rear sections of the vehicle Brake / Air Suspension System: * EBS system 2S/2M with stability program (including ABS/ALB function), EBS connector ISO 7638 (without connecting lines), parking brake as spring-applied brake, external pneumatic connections, as well as external EBS diagnosis port via ISO 7638 connector * EBS system (make of your choice from Kögel) * Air suspension system incl. 1 lift and lower control valve, mounted on the left in the direction of travel behind the axle assembly. Driving height automatically adjusts * 2 foolproof coupling heads at the front ISO 1728 * Steel air tanks for brake system and air supply ( EN 286-2 ) Floor: * Floor panels approx. 30 mm thick * Floor joints sealed all-round * Stake pockets for square tube stakes approx. 80 x 80 mm, layout according to drawing J9: 8 stake pocket rails (18 stake pockets per rail: 4 each on the outside + 10 in the centre) Front Wall: * Storage for up to 14 square tube stakes approx. 80 x 80 mm (length approx. 1,990 mm) on the inside front wall * Front wall approx. 2,000 mm high, with steel volume corner posts, made from profiled steel sheeting, bolted/riveted to the frame. 2 pairs of lashing rings (permissible lashing capacity approx. 1,000 kg per ring) at the bulkhead according to EN 12640 Lsdpfx Adsx Uvlfo Nehb Side Wall: * VarioFix steel slotted outer frame * 24 pairs of lashing rings on the outer frame (according to EN 12640), permissible tensile force approx. 5,000 kg per ring Bumper Protection: * 1 pair of steel buffer blocks approx. 160x85x85mm mounted on the outer rear frame plate * Transverse zinc-plated s

Condition: new, Year of construction: 2025, The multi-blade or double arbor circular saw SQUALO 420 is a technologically advanced, easy-to-use, precise, and highly reliable machine. It is essential in a modern sawmill for optimizing the production of sawn timber. Ideal for the production of battens, squares, sawn timber, profiles, trimmed boards, prisms, slats, and pallet components. Lsdpjx Urucsfx Ad Nehb SPECIAL PRICE, OFFER OF THE MONTH UNBEATABLE PRICE

Condition: like new (used), Year of construction: 2002, functionality: fully functional, Manufacturer: NAVA Model: 2MI1600DE/SE Year: 1998 Condition: Used Ljdpfx Aex R U Nued Nohb Stock number: 0367 Pressing force: 1,600 tons Number of pressing points: 4 Ram stroke: 1,200 mm Upper punch stroke: 1,500 mm Ram size: 4,500 x 2,500 mm Table size: 4,500 x 2,500 mm Blankholder cushion – total force: 400 tons Lower blankholder cushion stroke: 500 mm Withdrawable carriage: Present, front side

Condition: excellent (used), axle configuration: 3 axles, first registration: 03/2013, total width: 2,470 mm, suspension: air, tire size: 385/65-R22.5, color: black, Year of construction: 2013, Equipment: ABS, = Further options and equipment = - EBS (Electronic Braking System) - Lift axle - Air suspension - Disc brakes Ljdpjx Up Sfjfx Ad Nohb = Notes = Attractive 2013 D-TEC FLEXITRAILER 45FT High Cube swap chassis with SAF axles, equipped with disc brakes, ABS/EBS, first axle as lift axle, double extendable frame (center and rear) plus fixed head, suitable for 1x20FT, 2x20FT, 1x20FT center, 1x30FT, 1x40FT, 1x40FT HC, 1x45FT HC. Unladen weight: 4,800 kg, Gross vehicle weight: 43,000 kg, tyres 385/65-R22.5 (R: 4/8/7mm; L: 10/6/8mm), Belgian registration with valid roadworthiness certificate until 26.10.2026. Two units available. = Additional information = Axle configuration Tyre size: 385/65-R22.5 Axle brand: SAF DISC Suspension: air suspension Rear axle 1: lift axle; max. axle load: 9,000 kg; left tyre tread: 25%; right tyre tread: 60%; brakes: disc brakes Rear axle 2: max. axle load: 9,000 kg; left tyre tread: 50%; right tyre tread: 40%; brakes: no brakes Rear axle 3: max. axle load: 9,000 kg; left tyre tread: 45%; right tyre tread: 50%; brakes: disc brakes Weights Unladen weight: 4,800 kg Payload: 38,200 kg GVW: 43,000 kg Functional Body brand: D-TEC FLEXITRAILER Extendable chassis: Yes Service history and condition APK (roadworthiness inspection): valid until 12/2026 Technical condition: very good Visual condition: very good Further information Please contact Arne Honingh for more details.

Condition: good (used), Support bearings for Union Boring mills BFT80 and BFT 80/2 with fixed face support Lhedpfx Adecw Sths Neb -short version -for spindle diameter 80mm

Condition: good (used), Support bearings suitable for Union boring mills BFT80/3 and BFT 90/3 and BFT90/5 -short version -for spindle diameter 90mm Lsdpjcw St Ssfx Ad Nshb

Condition: excellent (used), Support bearings suitable for Union Boring mills BFT80/3 and BFT 90/3 and BFT90/5 Ljdpocxa A Aofx Ad Nehb -long version -for spindle diameter 90mm -for spindle diameter 102mm on request

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 35,000 h, machine/vehicle number: 0760801000602, control type: CNC control, degree of automation: semi-automatic, pipe diameter (max.): 60 mm, pipe length (max.): 3,250 mm, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, Adige Multiflex Tube Cutting Machine Lhjdpfxsxmg Aio Ad Nob In working condition Capable of cutting tubes from 10 mm to 60 mm diameter, tube brushing possible on both ends, measurement control via optical sensors, cutting tolerance +/- 0.5 mm, maximum cutting length 3,250 mm. The machine is equipped with an automatic tube packaging system using two magnetic arms. Packaging can be programmed as round, square, hexagonal, or in carton box. Machine comes with several mechanical and commercial spare parts.

Condition: excellent (used), axle configuration: 3 axles, first registration: 03/2013, total width: 2,470 mm, suspension: air, tire size: 385/65-R22.5, color: black, Year of construction: 2013, Equipment: ABS, = Additional Options and Equipment = - EBS (Electronic Braking System) - Lift axle - Air suspension - Disc brakes = Notes = Attractive 2013 D-TEC FLEXITRAILER 45FT High Cube swap chassis with SAF axles, disc brakes, ABS/EBS, first axle is a lift axle, extendable twice (center and rear) with fixed head, suitable for 1x20FT, 2x20FT, 1x20FT center, 1x30FT, 1x40FT, 1x40FT HC, 1x45FT HC containers. Unladen weight: 5,140 kg, Gross vehicle weight: 43,000 kg. Tires: 385/65-R22.5 (Rear: 6/4/4 mm; Front: 6/6/5 mm). Belgian registration with valid vehicle inspection (APK) until 26.10.2026. Two units available. = Further Information = Axle configuration: Tire size: 385/65-R22.5 Axle brand: SAF DISC Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 9,000 kg; Tire tread left: 40%; Tire tread right: 40%; Brakes: Disc brakes Rear axle 2: Max. axle load: 9,000 kg; Tire tread left: 25%; Tire tread right: 40%; Brakes: No brakes Rear axle 3: Max. axle load: 9,000 kg; Tire tread left: 25%; Tire tread right: 30%; Brakes: Disc brakes Weights: Unladen weight: 5,140 kg Payload: 37,860 kg Gross vehicle weight: 43,000 kg Ledpsx T Di Nsfx Ad Nshb Functionality: Body manufacturer: D-TEC FLEXITRAILER Extendable frame: Yes Maintenance, History, and Condition: APK (vehicle inspection): valid until 10/2026 Technical condition: very good Optical condition: very good Further information: Please contact Arne Honingh for more information.

Condition: used, Year of construction: 2003, Mazak Integrex E-410H Multi-Tasking Lathe with Mazatrol 640M Pro Control, Serial No. 164385 (2003). Country of Origin: Japan Please note: Toolholders/Tooling photographed in the toolchanger will not be supplied with this machine. Any available tooling will be a specifically described. Please Note: This lot is located in Birmingham, UK. A charge of £4,500 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Ledpfx Ajx T Df Dod Nshb

Condition: used, Year of construction: 2002, Mazak Integrex E-650H Multi-Tasking Lathe with Mazatrol PC-Fusion 640M Pro Control, 3000mm B/C, SMW-Autoblock KS-MSW 135-460mm Hydraulic Steady, Boring Bar Attachment, 120 ATC, Swarf Conveyor. S/No. 159927 (2002) Country of Origin: Japan Please note: Toolholders/Tooling photographed in the toolchanger will not be supplied with this machine. Any available tooling will be a specifically described. Please Note: This lot is located in Birmingham, UK. A charge of £4,500 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Ljdpfex T Dfwjx Ad Nehb

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, cutting height (max.): 120 mm, cutting width (max.): 1,000 mm, disc diameter: 400 mm, rotational speed (max.): 3,000 rpm, MEM Cobra lite edger. In good condition. 2 movable axles 18.5KW. Fixed axle 37KW or 11KW. Several new blades included. Lsdpfox Tzkksx Ad Nohb

Condition: good (used), functionality: fully functional, A lot of parts for Index K-16 machine Lodpsx Ty Uuofx Ad Nohb collets, curves, tool holders, shafts, gears, slides, distance rings, end switches, etc. See attached photos.

Condition: excellent (used), CATALOG NUMBER 7213 TECHNICAL DATA - Max cutting height: 180 mm - Track width: 400 mm - Shaft width: 370 mm - Shaft diameter: 60 mm - Max blade diameter: 300 mm - Blade bore diameter: 80 mm - Min element length: 630 mm - Max element width: 600 mm From above: - Pneumatic hold-down - Pawls - 2 metal hold-down rollers - Pawls - Saw shaft - Smooth hold-down roller - Pawls - Smooth hold-down roller From below: - 2 metal feed rollers, toothed - Pawls - Track - Saw shaft - Track - Infinitely variable feed speed adjustment via inverter - Main motors: 2 x 55 kW - Feed motor: 4 kW - Hydraulic lifting of the upper body - Hydraulic saw shaft adjustment - Pump motor: 0.37 kW - Central lubrication - Extraction port diameter: 1 x 300 mm, 1 x 380 mm - Dimensions (L x W x H): 3200 x 2350 x 2000 mm - Weight: approx. 5500 kg ADVANTAGES – Italian made – Twin-shaft Ljdex R Dxxepfx Ad Nshb – Used multi-blade saw, in very good condition Net price: 238,900 PLN Net price: 56,880 EUR Net price calculated at exchange rate 4.2 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 7212 TECHNICAL DATA - Track width: 250mm - Shaft width: 400mm - Shaft diameter: 80mm - Maximum blade diameter: 400mm - Blade bore diameter: 80mm - Maximum cutting height: 140mm - Table width with clearance: 730mm - Table length: 2130mm From the top: - Pawls - Pressure shaft, slip type - Pawls - Pressure shaft, smooth - Saw shaft Ljdpfex R Dxrsx Ad Nshb - Smooth pressure shaft, 4 pcs From the bottom: - Smooth slip shaft - Pawls - Track Infeed table + guide rail: - Roller width: 460mm - Feeder dimensions (L/W): 1660x630mm - Overall dimensions (L/W/H): 2010x630x900mm Outfeed table: - Feed rollers: 8 pcs - Roller width: 800mm - Overall dimensions (L/W/H): 4400x980x880mm - Centralized lubrication - Electric body raising/lowering: 0.55kW - Electric adjustment of saw shaft: 0.55kW - Stepless feed speed adjustment: 1–39m/min - Feed motor: 1.1kW - Main motor: 30kW - Extraction port diameter: 210mm - Overall dimensions of multirip saw (L/W/H): 2520x1870x2000mm + control panel - Total weight: approx. 2500kg ADVANTAGES – German-made – High cutting height – Infeed and outfeed tables – Used multirip saw, very good condition Net price: 89,900 PLN Net price: 21,400 EUR Net price calculated at the exchange rate of 4.2 PLN/EUR (Price may change in case of significant exchange rate fluctuations)

Condition: used, Year of construction: 1984, Manufacturer : Brogli + CO AG Model: Multi-Homo 5 CI 2563 Type : Vacuum mixer Year: 1984 Materials in contact with product: stainless steel. Useful capacity: 5 L Lhedpfsx R A Hujx Ad Njb Total capacity: 6.8 L Jacket pressure: 1 bar Vessel pressure: vacuum / 0.5 bar

Condition: used, Documentation Multievacuator Additional information Ljdpfx Ajx R Al Ded Nohb Pneumatic conveyor belt. Suction operation for powders or granules. The Multi-evacuator unit is a combination of blower and cyclone, designed for the suction of granular materials. The upper part, containing the impeller, can be opened for easy cleaning and replacement of the cyclone filter basket. The fan creates the necessary vacuum to draw the material from point A and discharge it through the cyclone via a rotary valve to point B, either directly or via a discharge line Capacity +/- 5 T/h depending on layout (see document). Motor: 3 kW Plan to provide a rotary valve. Available at extra cost.

Condition: excellent (used), Year of construction: 2009, operating hours: 100 h, functionality: fully functional, machine/vehicle number: SKU 102781, overall weight: 1,300 kg, power: 4 kW (5.44 HP), space requirement width: 1,350 mm, space requirement length: 1,520 mm, space requirement height: 1,400 mm, Equipment: rotational speed infinitely variable, The special design of the Multi Grind makes it possible to combine the functions of cylindrical, surface, and tool grinding in a single machine. During external cylindrical grinding, the workpiece can be clamped on one side or supported between centers in the robust tailstock. An internal grinding attachment can also be mounted on the headstock, and even light surface grinding tasks are possible with this model. In tool grinding operations, the Multi Grind allows for precise sharpening of the cutting edges on a wide variety of tools – making it particularly versatile in its application. Lsdpfx Asxqgi Dsd Njhb - External and internal cylindrical grinding - Surface grinding - Tool grinding - Hydraulic table feed - Extensive accessories

Year of construction: 1992, condition: ready for operation (used), Number of spindles: 6, max. bar capacity: 42mm, max. machining diameter: 42mm, speed: 5000rpm, machining slides: 4, number of slides front/rear: 4/2. Machine dimensions X/Y/Z: approx. 7200mm/1700mm/2300mm, weight: approx. 10000kg. The machine has an electrical problem as a result of which the control does not start up. Documentation available. On site inspection is possible. Ljdpfx Ajx Tum Sed Nshb

Condition: used, Year of construction: 1993, plate thickness 6.5 mm thickness at "Niro-steel" 5.0 mm angle adjustable from - to 30 - 140 Grad no. of strokes ca. 50 Hub/min table: 950 x 1030 mm blade length 220 x 220 mm total power requirement 4.0 kW weight 800 kg range L-W-H 1100 x 950 x 1280 mm current new price approx. 25.000 euros good condition (!!) special price on request Equipment: - electro-hydraulic notching machine - multi-function machine with 2x work stations * 1x notching, 1x unit for radius rounding * including radius punching tools - manual angle adjustment 30 - 140 degrees * 2x handwheels for angle adjustment - large / stable work table - 2x new angle stop, adjustable - automatic cutting gap adjustment - 1x freely movable foot switch - connection cable + 16A plug - cutting performance: * 6.5 mm to 60° ST * 5.0 mm to 60° VA * 4.0 mm to 30° ST * 3.0 mm to 30° VA Ledpfxexab Srs Ad Nehb

Condition: good (used), Year of construction: 1984, Multi-spindle head, multi-spindle drill head, drilling gear -Joint multi-spindle head Lodpfx Aedym D Ted Nohb -Max. x drill -7x drill built-in collet: mm -min. Distance drill: mm -Weight: 11.3 kg Articulated multi-spindle heads are: variable tools for various machining operations such as drilling, thread cutting, countersinking, reaming, milling, turning, with which several holes can be machined at once.

Condition: good (used), Forklift battery charger, industrial charger, forklift battery charger, industrial charger, Si rectifier -Charger: for forklifts, type D 24/200 MULTI WF200 -Input voltage: 400 V 50 Hz -Power: 24 V/200 A -Dimensions: 555/520/H890 mm -Weight: 119 kg Lhedpfx Ajwcdt Hod Njb

Condition: good (used), Multi-spindle head, multi-spindle drilling head, drilling gearbox -Multi-spindle head -Number: max. 2x drill bits/milling cutters -largest hole pattern spacing: 42 mm -Top opening: Ø 45 mm -Built-in collets: Ø 16 mm -Multi-spindle heads are variable tools Lhedpfxsb T Ti Ej Ad Neb -for various machining operations such as drilling, thread cutting, countersinking, reaming, -with which multiple holes can be machined at once -Dimensions: 120/110/H220 mm -Weight: 5.6 kg

Condition: used, Vacuum pump, vacuum pump -Manufacturer: Piab, Multi-Ejector Vacuum Pump with filter -Individual components: see photos -Total dimensions: 375/210/H290 mm -Weight: 4 kg Lhsdpjqva Nvefx Ad Nob

Condition: good (used), Multi-purpose hoist, grab hoist, lifting hoist, assembly hoist, cable hoist, universal cable hoist -Manufacturer: Grab hoist, multi-purpose hoist type TU 32 with steel cable -Load capacity: 3200 kg -Steel cable: Ø 16.3 mm / length 30 m -Number: 2x cable pull available Lodpfx Ajw D Ai Aod Nehb -Price: per piece -Dimensions: 680/170/H340 mm -Total weight: 65 kg/set