Used Moving Blades for sale (7,258)

Condition: good (used), TECHNICAL DATA • CNC: Heidenhain TNC 430 Bljdpfxjxqq Rrj Ab Tjr • Table surface: 7,100 x 1,200 mm • Longitudinal travel (X axis): 7,000 mm • Cross travel (Y axis): 1,500 mm • Vertical travel (Z axis): 1,500 + 500 mm • Rapid traverse (axes): 20,000 mm/min • Maximum working feed: 10,000 mm/min • Automatic head with 1º / 1º indexing: Included • Spindle taper: SK-50 • Spindle speed range: 20 – 3,500 rpm • Number of speed ranges: 2 • Main motor power: 50 kW • Automatic tool changer: Included • Tool changer positions: 60 • Internal coolant supply: Included • Swarf/chip conveyor: Included • Electronic handwheel: Included • Additional tank with paper filter: Included • Operator platform: Included • Guarding with 4 sliding doors: Included • Permissible load on table: 30,000 kg • Machine weight: 45,000 kg

Condition: used, axle configuration: 3 axles, first registration: 05/2016, total length: 14,040 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65R22.5, wheelbase: 9,060 mm, color: silver, Year of construction: 2016, Axle configuration Tyre size: 385/65R22.5 Axle brand: Valx Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 9,000 kg; Tyre tread left: 20%; Tyre tread right: 20% Rear axle 2: Max. axle load: 9,000 kg; Tyre tread left: 60%; Tyre tread right: 60% Rear axle 3: Lift axle; Max. axle load: 9,000 kg; Tyre tread left: 30%; Tyre tread right: 30% Bsdpfjxqn Ihjx Ab Telr Weights Unladen weight: 7,490 kg Payload: 34,510 kg Gross vehicle weight: 42,000 kg Maintenance APK (Vehicle inspection): valid until 06/2026 Identification Registration number: OP-10-GL Further information Please contact Mark van der Steen or Bob Beukers for further details.

Condition: used, Circular saw blade or grooving saw in very good used or like new condition. D: 250 mm keyway: 20 mm diameter: 250 mm drilling: 70 mm width: 6,0 mm Bjdpewrrdrjfx Ab Tslr knife: 20 + 2 d: 70 mm B: 6,0 mm Z: 20+2

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 50166, travel distance X-axis: 9,000 mm, travel distance Y-axis: 2,295 mm, travel distance Z-axis: 2,500 mm, rapid traverse X-axis: 9 m/min, rapid traverse Y-axis: 1 m/min, rapid traverse Z-axis: 2 m/min, feed rate X-axis: 3 m/min, feed rate Y-axis: 1 m/min, feed rate Z-axis: 2 m/min, spindle speed (max.): 710 rpm, spindle speed (min.): 15 rpm, rotational speed (max.): 710 rpm, total width: 8,500 mm, total height: 7,150 mm, total length: 20,720 mm, table length: 9,000 mm, table width: 2,000 mm, torque: 6,500 Nm, clearance between the columns: 2,750 mm, year of last overhaul: 2003, table height: 1,000 mm, table load: 45,000 kg, spindle motor power: 50,000 W, workpiece weight (max.): 45,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, GENERAL MACHINE CHARACTERISTICS The machine features a rigid gantry design with a movable table. The gantry is equipped with a height-adjustable crossbeam, which can be fitted with one or two vertical spindle heads of type VFS 160. Additionally, the gantry can accommodate one or two lateral (horizontal) spindle heads VFS 160. The specified spindle head types can be equipped with additional spindle heads, with up to 4 available. The clamping surface of the machine consists of two connected clamping tables, which can also be used separately when disconnected (only one can be active at a time). Clamping Table - Dimensions of one table: 2,000 x 4,000 mm - Total length of connected tables: 9,000 mm - Clamping surface of connected tables: 8,500 mm - Clamping T-slots (width x spacing x quantity): 36mm x 180mm x 11 pcs - Working table height from base: 1,000 mm - Load per meter of table length: 5,000 kg - Table travel: 4,250 mm (connected tables: 9,000 mm) - Working feed rate: 15 – 3,000 mm/min - Rapid traverse: 9,000 mm/min Gantry with Height-Adjustable Crossbeam - Clearance between columns: 2,750 mm - Crossbeam vertical adjustment: 2,295 mm - Crossbeam travel: 750 mm/min Vertical Spindle Head VFS 160 - Toolholder taper: ISO 60 - Spindle power: 50 kW - Speed range: 15 – 710 rpm - Working feed: 10 – 2,000 mm/min Blsdpfsxpudtox Ab Tor - Rapid traverse: 2,000 mm/min - Distance from spindle nose to clamping table: 425 – 2,720 mm Horizontal Spindle Head VFS 160 - Toolholder taper: ISO 60 - Spindle power: 50 kW - Speed range: 15 – 710 rpm - Working feed: 5 – 1,000 mm/min - Rapid traverse: 1,000 mm/min - Distance from spindle nose to table centering T-slot: 377 – 1,177 mm Overall Machine Dimensions (L x W x H): 20,720 mm x 8,500 mm x 7,150 mm Additional Spindle Heads: NVS Head (Extension Adapter) - Toolholder taper: ISO 60 - Speed: 15 – 710 rpm - Max. transmitted power from 60 rpm = 40 kW - Max. torque: 6,500 Nm HFUS Head (Universal Milling Head) - Toolholder taper: ISO 60 - Speed: 15 – 710 rpm - Max. transmitted power from 80 rpm = 22 kW - Max. torque: 2,700 Nm - Swivel range vertical axis: 360° - Swivel range horizontal axis: 360° - Quill adjustment: 50 mm HFOS Head (Double-Sided Right-Angle Milling Head) - Toolholder taper: ISO 60 - Speed: 15 – 710 rpm - Max. transmitted power from 60 rpm = 40 kW - Max. torque: 6,500 Nm

Year of construction: 2025, condition: new, Picture 1: Offered Set of two load moving skates with 6tonnes capacity each. You can move 12tonnes in total. The skate system is equipped with high quaity polyurethane wheels. other pictures: Load moving skates in different sizes from 60-220mm height and capacities between 5 and 220 tonnes. Available as 3-Point, 4-Point, Containerskates, 360° Rotational skates with Polyurethane wheels (for all floors) or Nylon wheels (for flat and smooth floors). Bjdpfx Absgi Dl No Tslr Please send us an inquiry with information about the weight and project you have to move. We will then send you a detailed offer. Short delievery times, typicalles in stock. Pictures show a selection.

Condition: used, Year of construction: 2005, X AXIS TRAVEL: 10000 MM Y AXIS TRAVEL: 4000 MM Z AXIS TRAVEL (RAM): 1000 MM W AXIS TRAVEL (SPINDLE): 800 MM TOTAL Z + W AXIS TRAVEL: 1800 MM SPINDLE DIAMETER 160 MM SPINDLE MOTOR POWER 40 KW SPINDLE RPM: 3000 RPM SPINDLE TAPER ISO 50 DIN 69871/1A NR 02 SPEED RANGE RAM DIMENSIONS: 460 X 520 MM RAPID FEEDING 20000 MM/MIN ROTARY TRANSLATION TABLE MODEL MG 50 OF 2500 x 3500 mm , load 50 ton , 360000 position 0,001° stroke 2000 mm HEIDENHAIN iTNC 530 CNC TOOL CHANGER 40 PLACES MANUAL UNIVERSAL HEAD ANCHOR PLATE 6000 X 2000 X 300 MM EXTERNAL REFRIGERATION Blodpfx Abjup Dcls Tor TOTAL INSTALLED POWER 110 KVA YEAR : 2005

Condition: new, Selling price: € 250, US$ 264,8 Blsdpfxepa Rrhe Ab Tjr For every brand and model of backhoeloder, skid steer, truck front, bobcat, loader snow plough will be manufactured. Please contact for detailed information. Prices are representative.

Condition: used, axle configuration: 3 axles, first registration: 08/2016, total length: 14,040 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65R22.5, wheelbase: 9,060 mm, color: silver, Year of construction: 2016, Axle Configuration Tyre Size: 385/65R22.5 Axle Brand: SAF CD Brakes: Disc Brakes Suspension: Air Suspension Rear Axle 1: Aluminium rims; Lift axle; Max. axle load: 9,000 kg; Tyre tread left: 50%; Tyre tread right: 50% Rear Axle 2: Aluminium rims; Max. axle load: 9,000 kg; Tyre tread left: 60%; Tyre tread right: 60% Rear Axle 3: Aluminium rims; Max. axle load: 9,000 kg; Tyre tread left: 50%; Tyre tread right: 50% Blsdpfxowhdn Us Ab Tor Weights Unladen weight: 7,450 kg Payload: 34,550 kg Gross vehicle weight: 42,000 kg Identification Registration: OP-74-JB Further Information Please contact Bob Beukers for more information.

Condition: good (used), Plate shears cutting blades, replacement blades for plate shears, replacement cutting edges, cutting blades, shear blades -Cutting blades. Replacement blades for Atlantic ATS 3006 guillotine shears, 2 pieces -Cutting length: 3120 mm -Hole spacing: 195 mm / M14 see photos -Dimensions: 49/19/3120 mm / 49/19.4/3120 mm Bsdpfx Abexf Dpke Tolr -Price/Delivery: complete -Transport dimensions: 3200/120/H190 mm -Total weight: 57 kg

Year of construction: 2015, condition: reconditioned (used), Technical data Feed hopper with hydraulic moving floor and bag opener: Blodju R Rtbopfx Ab Tor Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was in use at a large recycling company, where waste in bags was tipped into the hopper with wheel loaders and the bags were opened via the bag opener and the waste was conveyed in doses for further processing. The system worked perfectly until it was dismantled and was replaced by a larger system with a higher throughput capacity. The machine is in good working condition. On request, various spare parts can be purchased for a separate, additional fee. The buyer would have to dismantle the elevation for removal, as the machine is otherwise too high. Comments: The machine is currently being overhauled in our workshop. The photos show the machine in the current overhaul phase, so the system has not yet been fully reassembled. Once the overhaul work has been completed, probably in February 2025, the machine will be tested in operation without the use of materials. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Luenette Height without foot 350 mm Bodecrcxpopfx Ab Tjlr Diameter 140 mm Foot width 40 mm

Condition: used, Year of construction: 2000, travel distance X-axis: 9,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,500 mm, table width: 1,200 mm, table load: 5,000 kg, table length: 9,500 mm, Bed Milling Machine 5-axis Table size 9500 x 1200 mm. Bljdjxd Am Sepfx Ab Ter Movement x-Axis 9000 mm. y-Axis 1500 mm. z-Axis 1500 mm. Max table load 5000 kg/mtr Swiveling of vertical milling head 1°x1º CNC Control Heidenhain TNC 430 CB If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Double drilling mitre saw, with adjustable vertical blades, 2 lower drilling heads, 2 upper drilling heads Bsdpfx Abev Tnihe Tolr

Condition: used, axle configuration: 3 axles, first registration: 08/2015, total length: 14,040 mm, total width: 2,550 mm, suspension: air, tire size: 385/65R22.5, wheelbase: 9,060 mm, color: grey, Year of construction: 2015, Axle Configuration Tire Size: 385/65R22.5 Axle Brand: Valx Brakes: Disc Brakes Suspension: Air Suspension Rear Axle 1: Lifting axle; Max. axle load: 9,000 kg; Tire tread left: 80%; Tire tread right: 80% Rear Axle 2: Max. axle load: 9,000 kg; Tire tread left: 90%; Tire tread right: 90% Rear Axle 3: Lifting axle; Max. axle load: 9,000 kg; Tire tread left: 100%; Tire tread right: 100% Weights Unladen weight: 7,960 kg Payload: 34,040 kg Gross vehicle weight: 42,000 kg Maintenance APK (Roadworthiness Inspection): valid until 09/2026 Identification Registration: OT-09-RF Bljdpfoxqgq Uex Ab Tor Further Information Please contact Mark van der Steen or Bob Beukers for further information.

Condition: good (used), Approx. 30 segment circular saw blades up to approx. 1000 mm, bore 100 mm, primarily for LKH 310 and for PMC 12. Bledpfsxlg Nmox Ab Tsr

Condition: new, Year of construction: 2025, functionality: fully functional, The ASM 6-30 is a high-speed tooth setter for band saw blades, making it perfect for companies that use different volumes of bandsaw / sawmill blades per day. The machine is very user-friendly and easy to set up, making it the ideal solution for a wide variety of customers with different experiences in the industry. Voltage - 220V Frequency - 50Hz Power - 220V Secondary voltage - 24V Bedpfxsxivgcj Ab Telr Blade width - 15mm-60mm Tooth pitch - 6-30mm Accuracy - +- 0.04mm Blade thickness - 1.2mm Possible types of tooth set - left, right,straight/right,left,straight The machine is very user-friendly and easy toset up, making it the ideal solution for a wide variety of customers withdifferent experiences in the industry. Achieving precise tooth setting isessential for straight cutting and extended blade life, and our advancedclamping system delivers an impressive accuracy of 0.04mm. Capable of setting80-120 teeth per minute, the ASM 6-30 enhances your company's efficiency andensures a smooth workflow.

Condition: used, traveling Luenette Height without foot 300 mm Blsdpfxjcrcybs Ab Tor diameter 110 mm Foot width 50 mm

Condition: new, new spacer rings of different thickness for PAUL KME 2 and BM, with bore 75 mm, new carbide tipped saw blades 300 Ø and 380 Ø x 75 Ø, new CV saw blades hard-chrome plated different Ø Bljdpfx Aeh Anyfjb Tjr

Condition: new, table length 330 mm table width 220 mm x-travel 210 mm y-travel 125 mm table height 150 mm T-slots 12 mm weight 33 kg dimensions 0,41 x 0,35 x 0,22 mm Cross table with turntable Blodpfxeupw Twe Ab Tor

Condition: good (used), Bezel, stick, lynette -max. Passage: Ø 30 mm -Tip height: 175 mm -Drawing: in the photos Blodpfx Abed S Nmko Tjr -Dimensions: 425/130/H390 mm -Weight: 10.8 kg

Condition: new, HSS circular saw blades for steel machining with some secondary holes: Blsdpfsc R Tyqsx Ab Tor 315 x 2.5 x 32 mm, 90 Z 315 x 2.5 x 32 mm, 98 Z 225 x 1.9 x 32, 90 Z

Condition: new, Year of construction: 2024, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, The innovative flash butt welding machine for bandsaw and bimetal blades is developed entirely by our engineering department. It guarantees perfect welds and precise repeatability of the process. User friendly touch screen display from Schneider Electric that allows you to operate the machine effortlessly. The welding process is fully automatic, with the capability to adjust the electric current in 6 stages. The machine also allows for stepless regulation of electric current during annealing and pyrometric control throughout the welding process. The FBM10 is extremely easy to set up and cost-effective to maintain. Power supply voltage 400V Rated transformer capacity at 50% duty cycle 5kVA Frequency of electrical current 50HZ Clamping of the band saw blade Manual or Hydraulic clamping /Optional FBM 10.02/ Annealing Manual or Automatic, with pyrometric control /Optional/ Menu language Bg / En / Bljdsxhf Dzepfx Ab Tsr Possibility for welding: - band saw blades for wood mm 6÷60 - Bi-metal band saw blades mm 6÷54 - stainless steel band saw blades mm 6÷40 - band saw blades without teeth mm 6÷50 Weight: 197kg Dimensions: (length х width х height) mm 910 х 640 х 530

Condition: used, Luenette Height without foot 290 mm Foot width 50 mm Distance 170 mm Bljdpfscrcxtox Ab Tjr

Condition: new, table length 600 mm table width 240 mm x-travel 370 mm y-travel 130 mm table height 165 mm weight 60 kg dimensions 0,8 x 0,45 x 0,2 mm Bsdpfx Abefgvzus Tolr Cross table with turntable

Condition: new, table length 430 mm table width 240 mm x-travel 225 mm y-travel 160 mm table height 160 mm Bedpfsupw T Rox Ab Tjlr T-slots 12 mm weight 45 kg dimensions 0,6 x 0,45 x 0,2 mm Cross table with turntable