Used Monitor for sale (4,238)

Condition: used, Cutting thickness calculator for log band saw Cutting thickness computer Alternative to the Mudata control system with the option of individual customization Touch industrial PC Siemens Simatic S7 with rotary encoder or other measuring system Cutting programs are easy to change Cutting programs can also be divided into groups Dkodpfx Asiwaxnegvjn Program is adapted according to customer requirements Operation via touch display or keyboard possible The next step in the cutting program via buttons on the joystick All relevant values can be shown individually on the display (e.g. total distance, next cut, complete cutting program, dimension of the previous cut, feed speed, etc.) all parameters can be displayed and changed on their own parameter page or on the main page the sensor of a blade deviation monitor can be evaluated (possibly linked to feed speed) Infeed via proportional valve and hydraulic motor or via a stepper motor Inspection also possible in operation currently in operation with Primultini SGA 1300 CEB Suitable for any trolley size and make For a viewing appointment or further details please contact us by phone.

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 10/2024, total length: 14,040 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65R22.5, wheelbase: 9,060 mm, color: white, Year of construction: 2024, Color: white, RAL 9016 Complete with: - Aluminum chassis - Remote control - Small door in front wall Dkodpezb A U Ejfx Agvjn - Wear plates on the floor and side walls - Smartboard - Wabco OptiTire tire pressure monitoring system For more information, contact Mark van der Steen = Further information = Axle configuration Tire size: 385/65R22.5 Axle brand: BPW ECO Air HD Brakes: Disc brakes Suspension: Air suspension Rear axle 1: LM rims; lift axle; Max. axle load: 9,000 kg; Tire tread left: 80%; tire tread right: 80% Rear axle 2: LM rims; Max. axle load: 9,000 kg; Tire tread left: 90%; tire tread right: 90% Rear axle 3: LM rims; Max. axle load: 9,000 kg; Tire tread left: 70%; tire tread right: 70% Weights Curb weight: 7,670 kg Payload: 34,330 kg Gross vehicle weight: 42,000 kg Maintenance APK (periodic technical inspection): valid until 10/2026 Identification Registration number: OV-75-NB Further information Please contact Mark van der Steen for more details.

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 10 h, functionality: fully functional, overall weight: 40 kg, load capacity: 10 kg, controller model: R-30iB Mini Plus, The FANUC CRX-10iA is a modern, collaborative lightweight robot (cobot) characterized by ease of operation, high reliability, and maximum safety. Combined with the powerful R-30iB Mini Plus controller, this system provides a flexible and cost-effective solution for diverse automation tasks in both industrial and craft sectors. With a payload of up to 10 kg and a reach of 1,249 mm, the CRX-10iA is ideal for applications such as machine tending, assembly, material handling, packaging, palletizing, or quality inspection. Thanks to its integrated safety features, the robot can operate directly alongside human workers without a safety fence (depending on risk assessment). Programming is intuitive, either via the user-friendly touch tablet or guided by hand (drag & drop function). Even users without in-depth robotics knowledge can rapidly create and adapt programs. Proven FANUC technology ensures the highest precision, repeatability, and a long service life. Technical Highlights: - Payload: 10 kg - Reach: 1,249 mm - 6 axes - Repeatability: ±0.04 mm - Protection class: IP67 (robot arm) Dksdpoy Hp I Djfx Agven - Collaborative operation with integrated force and torque monitoring - R-30iB Mini Plus controller with a modern user interface The FANUC CRX-10iA stands out with its fast commissioning, low maintenance requirements, and flexible deployment options. It is ideal for companies looking to efficiently automate production or optimize existing processes.

Condition: good (used), Year of construction: 2018, HURCO VMX42i Vertical Machining Center Year of manufacture 2018 Control system: HURCO WinMax5 Travel distances: X – 1,067 mm / Y – 610 mm / Z – 610 mm Only approx. 3,600 spindle hours (as of March 25, 2026) Equipment: WinMax5 control system with removable electronic handwheel 2x 19” LCD color monitors (text + graphics) Network interface 2 software units (1x plain text dialog programming on the machine 1x for ISO code programming via external programming device or CAD/CAM system) Pentium technology, SSD (Solid-State-Drive) storage medium, 2 GB RAM, Ethernet interface, USB interface, System-internal self-diagnosis, WINDOWS platform Adaptipath Trochoidal milling for higher material removal rate, controlled feed rate and detection of residual material Simulation graphics Tool and material library Pocket milling with islands Synchronous thread cutting (Thread cutting without a compensation chuck) ISNC extended NC mode RENISHAW measuring probe RENISHAW workpiece and tool measurement Spindle cooler Chip conveyor Chip guard cabin Coolant system Coolant spray gun Flushing system to assist chip removal LED machine light in the working area Signal light for machine operating status Set of machine feet Programming and maintenance instructions via the control system help function Dkjdjzb A I Eepfx Agvsn High-pressure cooling system for coolant supply through the spindle Coolant type: emulsion Coolant pressure: 20 bar Integrated hydraulic tool clamping system WinMax PC software NC programming system WinMax PC with 3D-plus and DXF interface Technological features: Simple programming through plain text full dialog Easy operation via PC keyboard Easy control by switching from text display to graphics display Simple programming of the finished part contour On-line help in German Included in the scope of delivery: 2 hydraulic clamping vices approx. 50 tool holders, some with tools Operating manual Machine parameters on USB stick Technical data and control system – see PDF. All technical specifications, illustrations and content are non-binding and without warranty. Subject to change, errors and omissions. All other accessories visible in the photos and video are not included in the scope of delivery and are therefore not part of this sale. The scope of delivery only includes the accessories that are explicitly listed here, in the order confirmation and invoice. FCA (Free on Truck) D-32457 Porta Westfalica exclusively packaging Delivery time: immediately Subject to prior sale / Payment immediately upon completion of purchase.

Condition: used, Year of construction: 1991, total length: 1,520 mm, total width: 720 mm, power: 30 kW (40.79 HP), Fully overhauled, lubricated, and ready for operation. Automatic two-shaft hydraulic shredder designed for crushing and disentangling metal chips, plastics, wood, electrical cables, and other materials. It is controlled by a PLC that monitors sensors, manages shaft rotation, and automatically activates the reverse function, if several blockages occur within a short period, the shredder shuts down. In addition, the unit automatically switches off after a set period when operating without load. Technical Highlights: Power 30 kW Max hydraulic pressure: 250 bar Torque: 11,780 Nm Dkjdpowk Egwofx Agvjn 2 crushing shafts with blades Hydraulic drive with gear transmission (Valmet BB 3150CC) Automatic blade pressure adjustment (disc spring system)

Condition: like new (used), Year of construction: 2024, functionality: fully functional, type of input current: AC, total height: 680 mm, total width: 340 mm, total length: 680 mm, input voltage: 230 V, overall weight: 38 kg, type of cooling: air, electrical fuse: 16 A, laser power: 800 W, shaft length: 1,080 mm, continuous power: 800 kW (1,087.70 HP), Equipment: documentation/manual, head guard, Operation - Simplest operation via synergy characteristic curves - Achieve a finished weld in just three steps. Automatic adjustment of power, wire feed, oscillation width, oscillation frequency, laser frequency, PWM, hotstart, etc. - High-resolution display ensures optimal readability of all necessary parameters. An integrated help function provides better understanding of setting options - Fully integrated operation in the wire feeder case – operation via the machine or wire feeder selectable Technical Features - 20µm single-mode laser source - High-performance laser cells paired with gas-cooled torches provide maximum power and focus stability - 2-in-1 machine: welding and cleaning: laser cleaning is ideal for paint removal, rust removal, and scale removal - Optional: dual wire feed Safety - Dual-channel emergency stop system - Dual-channel safety interface for access control (door contact switch) - Key switch to prevent unauthorized use - Dual-channel fiber break detection and monitored QBH connection - Safety notices and manual activation of the laser release at every start - Dual-action pushbuttons prevent unintentional laser activation - Suitable for heavy-duty applications Advantages of Laser Welding Compared to Conventional Welding Processes - Hardly any distortion, incredibly fast, and outstanding quality (even on extremely thin materials < 1 mm) - Uses approximately 70% less energy - Fast and easy to learn - High process reliability - Extreme time savings with significantly reduced rework - One of the lightest torches on the market at approx. 680 g - Dual-channel safety loop for maximum safety Advantages of Craft-Laser Dsdpfx Agoyuvqmevokn - Laser cleaning with up to 100 mm scanning width and autofocus - 2-in-1 machine: welding and cleaning - Full synergy – no more parameter lists - Service-friendly – no more tedious shipping

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, machine/vehicle number: A32404019520, type of input current: three-phase, input voltage: 230 V, overall weight: 53 kg, type of cooling: air, laser power: 1,500 W, shaft length: 1,080 mm, continuous power: 1,500 kW (2,039.43 HP), Equipment: documentation/manual, head guard, type plate available, Operation - Simplest operation via synergy characteristic curves - Achieve finished welding results in just three steps. Automatic adjustment of power, wire feed, oscillation width, oscillation frequency, laser frequency, PWM, hot start, etc. - High-resolution display ensures optimal readability of all necessary parameters. An integrated help function provides a better understanding of the adjustment options - Fully integrated operation in the wire feed cabinet – optional operation via machine or wire feed system Technical Features - High-performance laser cells paired with gas-cooled torches ensure maximum power and focus stability - 2-in-1 machine: Welding and cleaning. Laser cleaning is ideal for paint removal, rust removal, and scale removal - Optional: Dual wire feed Safety - Two-channel emergency stop system Dkjdpfjyuvktjx Agvsn - Two-channel safety interface for access control (door contact switch) - Key switch to prevent unauthorized use - Two-channel fiber break detection as well as monitored QBH connection - Safety notices and manual activation of laser release at every start - Dual-action button prevents unintentional activation of the laser - Suitable for heavy-duty applications Advantages of Laser Welding Compared to Conventional Welding Methods - Minimal distortion, extremely fast, outstanding quality (even with very thin materials < 1 mm) - Consumes approximately 70% less energy - Quick and easy to learn - High process reliability - Extreme time savings with significantly reduced rework - One of the lightest torches on the market, weighing approx. 680 g - Two-channel safety circuit for maximum safety Advantages of Craft-Laser - Laser cleaning with up to 100 mm scanning width and autofocus - 2-in-1 machine: welding and cleaning - Full synergy – no more parameter lists - Service-friendly – no more inconvenient shipping required

Condition: used, mileage: 95,822 km, power: 368 kW (500.34 HP), first registration: 03/2023, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, soot filter, Errors and prior sale excepted! Internal number: 1402. NA60495 ----EQUIPMENT & condition see images Dkjdpfx Agsxci Hvsvjn ENGINE, TRANSMISSION & CHASSIS * Intarder LIGHTING & VISIBILITY * LED lights TECHNOLOGY & SAFETY * Tire pressure monitoring system (TPMS – Tyre Pressure & Temperature Monitoring System) ----The vehicle is in unprepared condition! Nationwide delivery available for an additional charge. Errors and prior sale excepted. We are happy to consider your vehicle for trade-in. Financing / leasing possible even without down payment! Any questions? We are happy to advise you!

Condition: used, Year of construction: 2014, Used machine Year of manufacture: 2014 Equipment and technical specifications: Complete in standard configuration with: - Support with linear guide consisting of: 1 pc. single-spindle horizontal drilling unit, 0.65 kW motor, stroke 70 mm Tool speed selectable via operator software (3,000/5,000/8,000 rpm) 1 pc. blow-out, glue application, and dowel insertion station for dowels Ø 8 mm, dowel length 25-50 mm - Fully automatic, electronically controlled central lubrication - X-axis NC-controlled, with working length 1,300 mm, feed speed max. 105 m/min - Z-axis adjustable manually via mechanical digital counter, position via support table 5-40 mm - Dowel insertion projection adjustable 7-20 mm via mechanical digital counter, drilling depth 0-35 mm (with drill length GL 70 mm) is automatically set in conjunction with insertion projection - Closed glue system with 6 bar glue pressure via glue nozzle, for adhesives with viscosity 150 to 350 mPas - Glue quantity infinitely adjustable via operator software - Selector switch GLUE/WATER for flushing the glue system, each with: 1 stainless steel container for 7.5 kg glue and 7.5 l water - Control lamp for glue level indication in the glue container - 1 pc. left side fence, 1 pc. right side fence, and 1 pc. center fence (all removable) - 4 pcs. start buttons for individual operation with 1-4 workpieces - 4 pcs. pneumatic angled clamping cylinders 10° for workpiece thickness up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. extraction funnel, connection Ø 80 mm 1 pc. TCT control with: Integrated industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, 15" capacitive TFT industrial touchscreen display, operating system: WINDOWS 7 - Programming via menu-guided user software, drilling distances freely programmable with ABSOLUTE, RELATIVE, or GRID dimensioning, automatic workpiece mirroring and process optimization, 4 work areas can be assigned with different programs, graphical workpiece representation, parametric programming, zero-point offset, programmable work lists, error diagnosis with plain text Options: 1 Electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 pc. glue nozzle 1 Z-axis with NC-controlled dynamic positioning for height adjustment of the drilling and dowel insertion station (programmable from 5-40 mm) travel speed max. 30 mm/sec 1 Single-spindle vertical drilling unit from above, 0.65 kW, (3,000/5,000/8,000 rpm), position (Y) manually adjustable via mechanical digital counter from 5-40 mm, drilling depth (Z) max. 30 mm (with drill length GL 57 mm), workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm (incl. drilling depth compensation, e.g., for Häfele Minifix) Dkedpfsy Ih Skex Agvsn 4 Vertical-angled clamping cylinders 10° with holders, additional 1 Keyboard with holder Availability: by arrangement; currently being overhauled at Ganner factory Location: Austria

Condition: used, mileage: 233,755 km, power: 95 kW (129.16 HP), fuel type: diesel, gearing type: mechanical, first registration: 10/2012, next inspection (TÜV): 06/2028, emission class: euro5, color: white, number of seats: 9, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, soot filter, * 10,900 EUR * Mercedes-Benz Sprinter 313 Cdi Tribus L2H2, 9 seats, wheelchair lift, air conditioning, Euro 5 * Seats (8+1) * Tribus * 6-speed transmission * Radio/CD player * Driver airbag * USB port * Rearview camera * Electric windows * Central locking * Automatic climate control * Start/Stop system * Tire pressure monitoring system * ABS * ESP * Wheelchair lift, 400 kg capacity * Wheelbase 367 cm * Unladen weight 2628 kg * Payload 872 kg * Permissible total weight 3500 kg * Passenger car registration * Vehicle No. 29 OPENING HOURS Monday - Friday from 9:00 AM to 5:00 PM (by appointment...) CONTACT DETAILS Telephone: Dedpfx Agszb Atuovskn WhatsApp E-mail: We can provide transfer and customs plates (export number). Subject to typing errors and prior sale. Technical specifications and features must be checked separately. The condition as per the contract is only what is inspected on site at the time of purchase and confirmed in writing. Please arrange an appointment.

Condition: used, mileage: 43,973 km, power: 130 kW (176.75 HP), first registration: 06/2025, fuel type: diesel, color: white, gearing type: automatic, number of seats: 6, total length: 6,836 mm, total width: 2,040 mm, total height: 2,590 mm, loading space length: 3,100 mm, loading space width: 1,832 mm, loading space height: 1,961 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, * 6-seater double cab with partition wall * Storage package 2: roof console with two 1 DIN slots and reading light * Exterior mirrors, electrically adjustable, heated and foldable * Manual air conditioning in the driver's cab * Leather multi-function steering wheel with Tiptronic * Fabric seat covers, "Austin" design * Central locking system with keyless start, without safe securing * 2 USB-C data/charging ports (center console) with increased charging power and 2 USB-C charging ports (center, windscreen) * 4 speakers: 2 tweeters, 2 woofers * Digital Cockpit Pro * Digital radio reception (DAB+) * Mobile phone connectivity via Bluetooth with inductive charging function * Navigation system * Wired & wireless App-Connect * Distraction and fatigue detection * Driver and passenger airbags with passenger airbag deactivation * Hill start assist * Electronic stability program (ESP) incl. ABS, ASR, EDS, SWA * Front Assist with warning and braking for vehicles, pedestrians and cyclists Dsdpfxjy N Irtj Agvekn * Electronic parking brake * Electronic cruise control (GRA) * Start-stop system with regenerative braking * Multi-function camera * Emergency call system eCall (requires mobile network availability) * Park assist and front/rear parking sensors with side protection * Rear view camera * Intermittent windscreen wiper control with light and rain sensor * Lane keeping assist * Crosswind assist * Traffic sign recognition * Electronic immobilizer * 12V socket in the cab (in the dashboard) * Diesel engine 2.0L / 130 kW (4V) TDI * 8-speed automatic transmission * Turn assist * Emission standard EU6e (EA)//WLTP3 N1-III, N2 * Professional assistance package incl. park assist & front/rear parking sensors with side protection * Exterior mirrors left and right convex, with integrated LED indicator and wide-angle section * Double passenger bench seat (right) with storage compartment * Cargo area lighting: 4 LED spots * C-rails on side walls, partition wall and roof bows * 3-point automatic seat belts with height adjustment and electric pretensioners (front) * Front towing eye * Grab handles on rear pillars * Vehicle registration with a gross vehicle weight of 3.5 t * Front wheel drive * Speed limiter * Halogen dual headlights * Grab handle on partition wall in load/passenger compartment * Wooden floor and wheel arch cladding in load/passenger compartment * Premium in-cab noise insulation * Fuel tank with 75 l capacity * With UNECE CS&SU * Discovery Media navigation system with 26 cm (10.4") color touchscreen and 4 speakers * Infotainment option with 26 cm (10.4") color touchscreen * Sliding door, right, in load/passenger compartment * Direct tire pressure monitoring system * Dashboard with additional console including 1 DIN slot and 4 extra switch locations * Hinges for rear wing doors with increased opening angle (max. 270°) * Front disc brakes, 16" (diameter 303 mm) * Front and rear side windows and rear window with heat-insulating glass (if present) * Side paneling in load compartment made of hollow plastic panels, up to the roof frame * Side marker lights * Left seat, in the 1st row * Daytime running light system with assistant lighting * Rear step, full width * Lashing eyes for load securing * Prepared for online services * V

Condition: used, mileage: 254,290 km, power: 103 kW (140.04 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, first registration: 07/2018, next inspection (TÜV): 07/2025, emission class: euro6, color: yellow, number of seats: 8, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, INTERNAL VEHICLE NUMBER: M451 ---- VW CRAFTER 2.0 TDI EURO 6 ---- SINGLE OWNER ---- 254,290 KM FULL SERVICE HISTORY ---- * START / STOP SYSTEM * HILL START ASSIST * CROSSWIND ASSIST * EMERGENCY BRAKE ASSIST (HBA) * AIR CONDITIONING * CRUISE CONTROL * SPEED LIMITER ---- M+S TIRES ON STEEL RIMS ---- HEATED WINDSCREEN ---- AUXILIARY HEATER ---- 8 SEATER ---- DIGITAL TACHOGRAPH ---- TOWBAR WITH INTEGRATED STEP PERMISSIBLE TRAILER LOAD UP TO MAX. 3,000 KG ---- ERGO COMFORT SUSPENSION SEAT, DRIVER SIDE COMFORT PASSENGER SEAT ---- SLIDING WINDOW ON DRIVER'S SIDE ---- * NAVIGATION SYSTEM * BLUETOOTH * HANDS-FREE SYSTEM * SD CARD * USB * APPLE CARPLAY * ANDROID AUTO * MULTI CD CHANGER * ARMREST + LUMBAR SUPPORT, DRIVER/PASSENGER SIDE * ELECTRIC WINDOWS * ELECTRIC AND HEATED SIDE MIRRORS * ADJUSTABLE REAR COMPARTMENT SEATS * 180° REAR DOORS * ON-BOARD COMPUTER * TOUCHSCREEN * VOICE CONTROL * 2 X 12V SOCKETS * STORAGE / COMPARTMENT IN CAB * LED LIGHTING DRIVER + LOAD AREA ---- Special Equipment: * Storage Package 2 * Driver and Front Passenger Airbag * Front Passenger Airbag Deactivation * Discover Media Audio-Navigation System (Touchscreen Color Display) * Electrically Adjustable and Heated Exterior Mirrors * Roof Lining * Driver Assist System: Fatigue Detection Sensor * Digital Tachograph * Chassis: Reinforced Front and Rear Dampers and Stabilizers * Sliding Window, Front Left, in Load/Passenger Compartment * Window Package * 2 Folding Remote Keys * Vehicle Without Load Compartment Partition * Vehicle Without Model Designation * Cruise Control Including Speed Limiter * Side Marker Lights * Tire Pressure Monitoring System * Spare Wheel with Jack and On-board Tools * Side / Curtain Airbag, Front * Seat Upholstery: Synthetic Leather * Comfort Passenger Seat in Cab * ErgoComfort Suspension Seat in Cab * 20-way Adjustment, Driver Side (Seat) * Front Bumper in Grey * Rear Step Right Side * Half-Height Plastic Cladding in Load/Passenger Compartment * Additional Heat Exchanger * Auxiliary Heater * Additional Air Heater Further Features: Dkodpoy N Ikvefx Agven * Convex Exterior Mirrors, Left and Right * LED Turn Signals Integrated in Exterior Mirrors * Cab Floor Covering: Rubber * Underbody Aerodynamic Trim * Dual Headlamps * Dual Tone Horn * Rear Grab Handles on Left and Right C-Pillar * Hill Start Assist * Brake Assist (HBA) * Crosswind Assist * Electric Front Windows * Grab Handles on A-Pillars * LED Interior Lighting in Cab * LED Interior Lighting in Load/Passenger Compartment * Body/Construction: Panel Van * Roof Variant: Standard Roof * Fuel Tank: 75 Ltr. * Radiator Grille with Upper Chrome Trim * Height and Reach Adjustable Steering Column * Headlamp Leveling * Truck Registration * Engine 2.0 Ltr - 103 kW TDI * Rear Fog Lamp * Wheelbase 3,640 mm * Tire Repair Kit * Euro 6 Emissions Standard * Sliding Door, Right, Load/Passenger Compartment * SCR System (AdBlue Technology) * Electro-mechanical Power Steering * Engine Start/Stop System * 2 x 12V Sockets in Cab * Lashing Eyes in Load Compartment * Driver Seatbelt Warning System * Heat-insulating Glazing * Central Locking with Remote and Interior Release * Permissible GVW 3.5 t UPRATING TO 3.5T TRAILER LOAD IS AVAILABLE OPTIONALLY AT EXTRA COST ---- Contact us for further information.

Condition: used, mileage: 120,536 km, power: 90 kW (122.37 HP), first registration: 08/2020, fuel type: diesel, overall weight: 2,375 kg, next inspection (TÜV): 08/2026, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, Year of construction: 2020, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), soot filter, INTERNAL VEHICLE NUMBER: M468 4 x VW CADDY WITH SHELVING SYSTEMS, AVAILABLE WITH IDENTICAL EQUIPMENT BUT DIFFERENT MILEAGES VW CADDY 2.0 TDI EURO 6d-TEMP KM: 120,536 FULL SERVICE HISTORY LAST INSPECTION WITH OIL CHANGE AT 120,308 KM ON 12.03.2025 DIGITAL VEHICLE HISTORY AVAILABLE. ALL INSPECTIONS WERE CARRIED OUT BY AN AUTHORIZED MANUFACTURER WORKSHOP. 1 OWNER 4MOTION (ALL-WHEEL DRIVE) AS-NEW M+S TYRES 2 SEATS - Cruise control - Speed limiter - Hill start assist - Brake assist Dkedpfx Aey N Ikisgvjn - Multi-collision brake - Rear park assist (PDC) - Air conditioning - Start/stop automatic - Towbar TOWING CAPACITY UP TO 1,450 KG Cornering lights Fog lights LED daytime running lights Trendline trim Gas bottle transportation ventilation Sortimo wooden load floor with lashing rings Vehicle interior fittings by SORTIMO GLOBALSYSTEM With drawers and shelves: 7 drawers - 4 drawers, each 45 x 40 cm - 3 drawers, each 65 x 35 cm - 1 drawer, 45 x 65 cm 3 shelves - 1 shelf, 35 x 70 cm - 1 shelf, 45 x 35 cm - 1 shelf, 35 x 120 cm 6 screw boxes Broom and shovel holder Roof rack by SORTIMO TOPSYSTEM Fire extinguisher - Bluetooth hands-free kit - USB - AUX - SD card - Central locking with 2x remote keys - Electrically adjustable, heated exterior mirrors - Electric windows - Lumbar support - Right sliding door, glazed - Rear doors, glazed - Partition wall with window - Heated rear window - LED lighting for cab/load compartment - Storage compartment in cab Special equipment: - Composition Audio system (mono display, SD card slot, AUX-IN) - Exterior mirrors - Version: commercial vehicle - Connectivity package - Rear park assist - 2 remote keys - Rear wing doors with glazing - Heated rear window - High load compartment partition with window - Tyre pressure monitoring display - Heated washer jets - Fixed side window in loading/passenger compartment, front right - Robust seat upholstery - 12V socket in dashboard - Engine protection (underbody guard: engine and transmission) Additional equipment: - Third brake light - Passenger airbag - Driver’s airbag - Traction control (ASR) - BlueMotion Technology package - Left exterior mirror aspheric - Exterior mirrors electrically adjustable and heated - Right exterior mirror convex - Painted exterior mirrors - BlueMotion Technology - Brake assist - Roof rack preparation - Electronic differential lock - Hill start assist - Multi-collision brake - Fatigue detection system - Tinted laminated windscreen - Lockable, illuminated glove box - LED interior lights in cab - Dust and pollen filter - Body type: panel van - Lumbar support driver’s seat (left) - 3-spoke steering wheel - Steering column (steering wheel) manually adjustable - Height/length adjustment - Truck registration - Engine: 2.0 l - 90 kW TDI - Engine drag torque control (MSR) - Multifunction display Plus - Non-smoker package - Standard payload - Wheelbase: 3,006 mm - Tyre repair kit (Tire Mobility Set) - Low-emission according to Euro 6d-TEMP - Right sliding door - Drawer/storage compartment under front seats - SCR system (AdBlue technology) - Front side airbags with head airbag unit - Front seat belts with height-adjustable pretensioners - 6x15 steel wheels - Start/Stop

Condition: used, mileage: 226,024 km, power: 103 kW (140.04 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, first registration: 07/2018, next inspection (TÜV): 07/2025, emission class: euro6, color: yellow, number of seats: 8, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, INTERNAL VEHICLE NUMBER: M449 ----VW CRAFTER 2.0 TDI EURO 6----KM: 226,024 SERVICE BOOK MAINTAINED LAST SERVICE AT 185,783 KM ON 22.05.2024 ALL SERVICING CARRIED OUT BY A MANUFACTURER-AUTHORIZED WORKSHOP VEHICLE HISTORY AVAILABLE IN DIGITAL FORMAT ONE OWNER ----* START / STOP FUNCTION * HILL START ASSIST * CROSSWIND ASSIST * EMERGENCY BRAKE ASSIST (HBA) * AIR CONDITIONING * CRUISE CONTROL * SPEED LIMITER ----M+S TIRES ON STEEL RIMS----HEATED WINDSCREEN----ADDITIONAL HEATER----8-SEATER----DIGITAL TACHOGRAPH----TOW BAR WITH INTEGRATED STEP PERMISSIBLE TRAILER LOAD UP TO 3,000 KG----ERGO COMFORT SUSPENSION SEAT (DRIVER'S SIDE) COMFORT SEAT (PASSENGER SIDE)----SLIDING WINDOW ON DRIVER'S SIDE ----* NAVIGATION SYSTEM * BLUETOOTH * HANDS-FREE KIT * SD CARD * USB * APPLE CARPLAY * ANDROID AUTO * MULTI-CD CHANGER * ARMREST + LUMBAR SUPPORT (DRIVER’S/PASSENGER’S SIDE) * ELECTRIC WINDOWS * ELECTRIC & HEATED SIDE MIRRORS * FULLY ADJUSTABLE SEATS IN LOAD AREA * ON-BOARD COMPUTER * TOUCHSCREEN * VOICE CONTROL * LED LIGHTING IN DRIVER & LOAD AREA ----Special Equipment: * Storage Package 2 * Driver/Passenger Airbag * Passenger Airbag Deactivation * Discover Media Audio-Navigation System (Touchscreen Colour Display) * Electrically Adjustable and Heated Exterior Mirrors * Headliner * Driver Fatigue Detection Sensor * Digital Tachograph * Chassis: Reinforced Suspension and Anti-Roll Bars, Front and Rear * Sliding Window in Load/Passenger Area, Front Left * Window Package * 2 Folding Remote Keys * Vehicle Without Bulkhead * Vehicle Without Model Designation Dodpfx Agey N Ih Ujvjkn * Cruise Control with Speed Limiter * Side Marker Lights * Tire Pressure Monitoring System * Spare Wheel (Full Size) incl. Toolkit and Jack * Side Airbag / Curtain Airbag (Front) * Seat Upholstery: Artificial Leather * Comfort Passenger Seat in Cab * ErgoComfort Suspension Seat, 20-way Adjustable (Driver’s Side) * Front Bumper in Grey * Rear Step, Right * Half-Height Plastic Lining in Load Area * Additional Heat Exchanger * Auxiliary Heater (Air) Additional Features: * Convex Exterior Mirrors (Left and Right) * Integrated LED Indicators in Exterior Mirrors * Rubber Floor Covering in Driver’s Cab * Aerodynamic Underside Panel * Dual Headlights * Twin-tone Horn * Grab Handles on Rear Pillars, Left & Right * Hill Start Assist * Brake Assist (HBA) * Crosswind Assist * Electric Front Windows * Grab Handles on A-Pillars * LED Interior Lighting in Cab * LED Interior Lighting in Load/Passenger Compartment * Body Type: Panel Van * Body Variant: Standard Roof * Fuel Tank: 75 Litres * Upper Chrome Trim on Radiator Grille * Height/Reach Adjustable Steering Column * Headlamp Range Adjustment * Truck Registration * Engine: 2.0 Litre - 103 kW TDI * Rear Fog Lamp * Wheelbase 3640 mm * Tire Repair Kit * Low Emission According to Euro 6 * Sliding Door, Load/Passenger Area Right * SCR System (AdBlue Technology) * Electromechanical Power Steering * Start/Stop Engine System * 12V Power Sockets in Cab (x2) * Lashing Eyes in Load Area * Driver Seatbelt Warning System * Heat-Insulating Glazing * Central Locking with Remote Control & Interior Operation * Permissible Gross Weight 3.5 t UPRATING TO 3.5 T TRAILER LOAD POSSIBLE

Condition: used, mileage: 269,000 km, power: 103 kW (140.04 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, first registration: 07/2018, next inspection (TÜV): 07/2025, emission class: euro6, color: yellow, number of seats: 8, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, INTERNAL VEHICLE NUMBER: M457----VW CRAFTER 2.0 TDI EURO 6----1 OWNER----269,000 KM FULL SERVICE HISTORY----* START / STOP SYSTEM * HILL START ASSIST * CROSSWIND ASSIST * EMERGENCY BRAKE ASSIST (HBA) * AIR CONDITIONING * CRUISE CONTROL * SPEED LIMITER ----AS-NEW M+S TIRES ON STEEL RIMS----HEATED WINDSCREEN----AUXILIARY HEATER----8 SEATER----DIGITAL TACHOGRAPH----TOW BAR WITH INTEGRATED STEP MAX. PERMISSIBLE TRAILER LOAD UP TO 3,000 KG----ERGOCOMFORT SUSPENSION DRIVER'S SEAT COMFORT PASSENGER SEAT----SLIDING WINDOW ON DRIVER'S SIDE----* NAVIGATION SYSTEM * BLUETOOTH * HANDS-FREE SYSTEM * SD CARD * USB * APPLE CARPLAY * ANDROID AUTO * MULTI-CD CHANGER * FRONT/PASSENGER ARMREST + LUMBAR SUPPORT * ELECTRIC WINDOWS * ELECTRICALLY ADJUSTABLE & HEATED MIRRORS * ADJUSTABLE SEATS IN LOAD AREA * 180° REAR DOORS * ON-BOARD COMPUTER * TOUCHSCREEN * VOICE CONTROL * STORAGE/COMPARTMENT IN CAB * LED LIGHTING IN DRIVER’S CAB + LOAD SPACE ----Special Equipment: * Storage Package 2 * Driver / passenger airbags * Deactivatable passenger airbag * Discover Media audio navigation system (touchscreen color display) * Electric adjustable & heated exterior mirrors * Roof lining * Driver assistance system: fatigue detection sensor * Digital tachograph * Suspension: reinforced front and rear dampers and stabilizers * Sliding window front left in load / passenger compartment * Window package * 2 folding radio keys * Vehicle without cargo area partition wall * Vehicle without model designation * Cruise control system including speed limiter * Side marker lights * Tire pressure monitoring system * Spare wheel incl. on-board tools and jack * Side airbags / curtain airbags front * Seat upholstery: artificial leather * Comfort passenger seat in cab * ErgoComfort suspension seat in cab * Driver's seat with 20-way adjustment * Front bumper in grey * Rear step right * Semi-high plastic lining in load / passenger compartment * Additional heat exchanger * Auxiliary heater * Additional air heater Further equipment: * Convex exterior mirrors left and right * LED indicator lights integrated in exterior mirrors * Rubber flooring in driver’s cab * Aerodynamic underbody cladding * Twin headlights * Twin-tone horn * Entry handle on rear posts left and right * Hill start assist * Brake assist (HBA) * Crosswind assist * Electric front windows * A-pillar grab handles * LED interior lights in cab Dkedsy N Ii Ejpfx Agvsn * LED lighting in load/passenger area * Body/build: box van * Body version: standard roof * Fuel tank: 75 litres * Radiator grille with upper chrome trim * Height and reach adjustable steering column * Headlight range adjustment * Truck registration * Engine 2.0 litre – 103 kW TDI * Rear fog light * Wheelbase 3640 mm * Tire repair kit * Low-emission according to Euro 6 * Sliding door right in load/passenger compartment * SCR system (AdBlue technology) * Electromechanical power steering * Engine start/stop system * 2 x 12V sockets in cab * Lashing eyes in load area * Seatbelt warning (driver’s side) * Heat-insulating glazing * Central locking with remote control and interior operation * Permissible total weight 3.5 t UPGRADING TO 3.5T TRAILER LOAD IS AVAILABLE AS AN OPTION FOR AN EXTRA CHARGE----++ Exclusive offer at Autohaus Mat GmbH:

Condition: used, mileage: 85,410 km, power: 90 kW (122.37 HP), fuel type: diesel, gearing type: mechanical, first registration: 09/2020, next inspection (TÜV): 09/2026, emission class: euro6, color: white, number of seats: 17, Year of construction: 2020, Equipment: ABS, air conditioning, electronic stability program (ESP), INTERNAL VEHICLE NUMBER: M580 ---- VW CRAFTER 2.0 TDI 17-SEATER ---- KM: 85,410 FULL SERVICE HISTORY LAST INSPECTION AT 65,825 KM ON 19.03.2024 ALL INSPECTIONS CARRIED OUT AT MANUFACTURER-AUTHORIZED WORKSHOPS!!! DIGITAL VEHICLE HISTORY AVAILABLE 1 OWNER MAX SPEED 100 KM/H ----12 TIRES INSTALLED 6 x AS-NEW WINTER TIRES 6 x AS-NEW SUMMER TIRES ----* AUTOMATIC CLIMATE CONTROL * (ACC) ADAPTIVE CRUISE CONTROL * SPEED LIMITER * FRONT ASSIST * LANE ASSIST * FRONT ASSIST * EMERGENCY BRAKE ASSIST * CROSSWIND ASSIST * HILL START ASSIST * START/STOP SYSTEM * REVERSING CAMERA * PARK DISTANCE CONTROL FRONT + REAR * AUTOMATIC LIGHTING CONTROL ---- HEAT EXCHANGER + EVAPORATOR ---- 17 SEATS ---- SIDE STEP AT SLIDING DOOR ---- HEATED SEATS ---- HEATED WINDSCREEN ---- LED HEADLIGHTS ---- DRIVER'S SEAT WITH MASSAGE FUNCTION ---- DRIVER'S ERGOACTIVE SWIVEL SEAT ---- FIRE EXTINGUISHER ---- 2 x WHEEL CHOCKS ---- DIGITAL TACHOGRAPH ---- ROOF HATCH ---- DRIVER COMPARTMENT PARTITION CURTAIN ----* MULTIFUNCTION STEERING WHEEL * ELECTRIC WINDOWS * ELECTRIC, HEATED & FOLDING EXTERIOR MIRRORS Dkedpey N Ilgefx Agvon * VOICE CONTROL * BLUETOOTH HANDSFREE SYSTEM * APPLE CARPLAY * MULTI-CD CHANGER * USB * AUX * SD CARD * LUMBAR SUPPORT * 2 x ARMRESTS * STORAGE/COMPARTMENT IN DRIVER CAB * LED DRIVER CABIN LIGHTING * LED PASSENGER COMPARTMENT LIGHTING ----Special equipment: * Front/Passenger Airbag * Passenger Airbag Deactivation * Composition Media Audio System (Radio/CD-Player, MP3-Playback) * Electrically Adjustable, Heated & Folding Mirrors * Rear Roof-Mounted Indicators * Roof Lining * Driver Assistance Package 2 * Advanced Parking Sensors Front and Rear * Window Package * No Load Compartment Partition * No Model Designation * 100 km/h Speed Limiter * Climatronic Automatic Air Conditioning (Cabin) with Additional Heat Exchanger and Evaporator * Rear-View Camera * Heated Washer Nozzles * LED Headlights * Right Sliding Door with Intermediate Stop and Extended Opening * Mud Flaps Front and Rear * Heated Drivers and Passengers Seats * ErgoActive Swivel Seat, Driver's Side (20-way Adjustment, Massage Function) * Rear Privacy Glass * Half-Height Plastic Load Space Cladding * Additional Heat Exchanger and Evaporator Other fittings: * Dashboard with Additional Console * Left/Right Convex Exterior Mirrors * LED Turn Signals Integrated in Mirrors * Rubber Flooring in Cab * Onboard Tools, Underbody Aerodynamics * Dual-Tone Horn * Rear Entry Handles Left/Right * Hill Start Assist * Brake Assist (HBA) * Crosswind Assist * Lane Keeping Assist (Lane Assist) * Area Monitoring System (Front Assist) with City Emergency Braking * Digital Tachograph * Electric Windows Front * 2 Foldable Remote Keys * A-Pillar Grab Handles * LED Cabin Lighting * LED Load Space Lighting * Body/Build: High Roof Van Long Wheelbase * Body Version: High Roof in Vehicle Color * Fuel Tank: 75 liters * Radiator Grille with Upper Chrome Strip * Adjustable Steering Column * Headlight Range Adjustment

Condition: used, mileage: 110,050 km, power: 130 kW (176.75 HP), fuel type: diesel, gearing type: automatic, overall weight: 5,000 kg, first registration: 10/2021, emission class: euro6, color: white, number of seats: 15, total length: 6,836 mm, total width: 2,069 mm, total height: 2,625 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Internal vehicle number: 3368_DX ----Why autonext GmbH? One of the largest commercial vehicle showrooms nationwide Always over 400 vehicles immediately available Largest selection – Best prices More than 1,000 satisfied customers per year – Top customer reviews WhatsApp chat: ### Offer: Financing from 4.99% ### ----Get a clear impression now: Use the YouTube link to see a full walkaround of the vehicle inside and out: Top condition! One owner, German vehicle, non-smoking vehicle Full Volkswagen service history Wheelchair-adapted conversion Maxi version Automatic transmission Number of seats: 15 Roof-mounted air conditioning Roof emergency exit Automatic climate control (Climatronic) Electric retractable step Wheelchair restraint system Wheelchair space Reversing camera Front and rear parking sensors with active side protection Lane change assistant (Side Assist / Blind Spot Sensor) Lane keeping assistant (Lane Assist) incl. Blind Spot Sensor Cruise control system (Tempomat) Rear cross-traffic alert Drowsiness detection sensor Tinted windows Heated seats Fire extinguisher Upon request, we offer a retrofit tow bar for only €599; if possible, also a towing capacity upgrade up to 3.5t ---- Special equipment: * Audio system Composition Colour (Radio / SD card interface / USB) * Multimedia interface 2 x USB (Type C) front * Mobile phone interface Bluetooth * Mobile online services App-Connect * Lockable glove compartment Dodpjy N H R Usfx Agvekn * Driver assistance system: Front and rear parking sensors with active side protection and lane change assistant (Side Assist) * Exterior mirrors electrically adjustable, heated, and power folding * Driver assistance system: Lane change assistant (Side Assist / Blind Spot Sensor) * Driver assistance system: Rear cross-traffic alert * Driver assistance system: Front and rear parking sensors with active side protection * Driver assistance system: Front and rear parking sensors * Driver assistance system: Lane keeping assistant (Lane Assist) incl. Blind Spot Sensor * Driver assistance system: Lane change assistant (Side Assist / Blind Spot Sensor) * Driver assistance system: Rear cross-traffic alert * Window package * Fixed windows in cargo/passenger compartment: front left * Fixed windows in cargo/passenger compartment: front right * Fixed windows in cargo/passenger compartment: middle left * Fixed windows in cargo/passenger compartment: middle right * Fixed windows in cargo/passenger compartment: rear left * Fixed windows in cargo/passenger compartment: rear right * Rear wing doors with glazing * Dimmable interior rear-view mirror * Climatronic automatic climate control (driver’s cab) with additional heat exchanger and evaporator * Storage package * Shelf: DIN slot front, below roof liner * Cabin reading light * Rain sensor * Automatic headlight activation * Light assistant (Coming Home, Leaving Home) * Spare wheel with standard tyres, incl. on-board tools and jack * On-board tools and jack * Additional heat exchanger and evaporator * Additional heat exchanger * Second battery with battery monitoring * Airbags, driver and passenger side, deactivatable passenger airbag * Comfort headliner in driver’s cab * Driver assistance system: Drowsiness detection sensor * Suspension: reinforced damping and stabilizers, front and rear * Heated windscreen * Four remote folding keys * Rubber floor mats for driver’s cab * Model without bulkhead * Speed

Condition: used, mileage: 110,050 km, power: 130 kW (176.75 HP), fuel type: diesel, gearing type: automatic, first registration: 10/2021, emission class: euro6, color: white, number of seats: 15, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, Internal vehicle no.: 3368 ----Why autonext GmbH? One of the largest commercial vehicle exhibitions in Germany. Always over 400 vehicles immediately available at the best price and widest selection. Over 1,000 satisfied customers per year – top-rated service. WhatsApp Chat: ### Special offer: Financing from 4.99% ### ----Get a clear impression now: The YouTube link provides a full walkaround of the vehicle, inside and out: Top condition! Single owner, German vehicle, non-smoker vehicle Full service history exclusively at Volkswagen Disabled-accessible conversion Maxi version Automatic transmission Number of seats: 15 Roof air conditioning Emergency roof exit Automatic climate control (Climatronic) Electric entry step Wheelchair restraints Wheelchair space Rear view camera Front and rear parking sensors with active side protection Lane change assistant (Side Assist / Blind Spot Sensor) Lane keeping assistant (Lane Assist) incl. Blind Spot Sensor Cruise control system Rear traffic alert Driver fatigue detection sensor Tinted windows Heated seats Fire extinguisher Upon request, we offer retrofitting of a towbar for only €599, plus, where possible, an upgrade of the towing capacity to up to 3.5t ---- Optional features: * Composition Colour audio system (Radio / SD card interface / USB) * 2 x USB (Type C) multimedia interface at the front * Bluetooth mobile phone interface * Mobile online services via App-Connect * Lockable glove compartment * Driver assistance system: Parking sensors front and rear with active side protection & lane change assist (Side Assist) * Electric, heated, and folding exterior mirrors * Driver assistance system: Lane change assistant (Side Assist / Blind Spot Sensor) * Driver assistance system: Rear traffic alert * Driver assistance system: Parking sensors with active side protection front and rear * Driver assistance system: Parking sensors front and rear * Driver assistance system: Lane keeping assist (Lane Assist) incl. Blind Spot Sensor Dodpjy N H R Iofx Agvjkn * Driver assistance system: Lane change assistant (Side Assist / Blind Spot Sensor) * Driver assistance system: Rear traffic alert * Window package * Fixed windows in load/passenger area: front left * Fixed windows in load/passenger area: front right * Fixed windows in load/passenger area: middle left * Fixed windows in load/passenger area: middle right * Fixed windows in load/passenger area: rear left * Fixed windows in load/passenger area: rear right * Rear wing doors with glazing * Interior mirror with anti-dazzle function * Climatronic automatic climate control (cab) with second heat exchanger and second evaporator * Storage package * Storage: DIN slot at front under headliner * Cabin reading light (front) * Rain sensor * Automatic headlight activation * Light assistant (Coming Home, Leaving Home functions) * Spare wheel with standard tires incl. tool kit and jack * Tool kit and jack * Additional heat exchanger and evaporator * Additional heat exchanger * Second battery with battery monitoring * Driver/passenger airbags, passenger airbag can be deactivated * Roof trim (comfort headliner) in cab * Driver assistance system: fatigue detection sensor * Chassis: reinforced shock absorbers and stabilizers, front and rear * Heated windscreen * 4 folding remote keys * Rubber floor mats (cab) * Vehicle without load compartment partition * Speed

Year of construction: 2019, condition: excellent (used), functionality: fully functional, CNC machining center with 4 controlled axes and automatic spindle rotation (0-180°). This enables the machine to reach all 3 profile sides of the workpiece without manual repositioning. The machine is equipped with a water-cooled spindle capable of 20,000 rpm. It is suitable for machining profile bars or parts made of aluminum, PVC, light metal alloys, and steel up to 2 mm. Features a manual tool magazine with 9 slots and an automatic tool magazine with 4 slots on the left side of the enclosure. Additionally, it has a second automatic tool magazine with 4 slots on the right side of the enclosure. The profile is positioned by a pneumatically operated stop on the left, and secured by 4 robust clamps that are positioned and monitored automatically. With a second pneumatic stop on the right-hand side, processing of long bars—twice the machining length (overlength machining)—is possible. A movable clamping area also simplifies loading and unloading of workpieces and considerably increases the maximum workable cross-section. The machine comes with the following special equipment: - CamPlus software - Shape software for creating custom machining operations and for importing machining drawings/contours Dodpfx Ageyzb Ekovekn - An additional tool magazine - A second stop - A safety enclosure (fully enclosed) Setup, commissioning, and operator training can also be provided by us!

Condition: ready for operation (used), Year of construction: 2018, number of axes: 3, spindle motor power: 5,000 W, spindle speed (max.): 24,000 rpm, This 3-axis VITAP Point K2 TOP 2.0 was manufactured in 2018. It features continuous machining with a maximum workpiece weight of 80 kg and dimensions of Y 1200 mm and Z 50 mm. The machine includes an automatic 4-station tool changer and a dual “0” reference laser for precise positioning. If you are looking to get high-quality CNC processing capabilities, consider the VITAP Point K2 TOP 2.0 machine we have for sale. Contact us for further details. • Condition: not rebuilt, without warranty • CE compliantMachining and axes • Continuous machining, machining from below, automatic return of workpiece to operator • 3 controlled axes: • X-axis: uninterrupted workpiece transport via DDT (Dual Dynamic Transport System) with brushless motor • Y-axis: drilling head travel • Z-axis: drilling • No workpiece length limitation • Rear workpiece exitReferencing and positioning • Dual “0” reference laser (transmitter/receiver) for start/end detection; compensates for dark-edged materials • Program readjustment for drilling from below for flushness on vertical/horizontal workpieces • Side stops with rollers (fixed and movable), mechanical digital readout, automatic alignment to 0-stop, removal up to 3 mm on the 0-line • Constant side clamping device for precise positioning on the 0-line • Adjustable zero point for 4-sided formattingTooling and heads • Automatic 4-station tool changer • 12 independent vertical spindles • Horizontal spindles: • X-axis: (2+2) • Y-axis: (2+2) • 1 saw (Ø 100 mm) • 5 kW electrospindle, ISO 30 taper, 12,000–24,000 rpm • Spindle speed (additional spec): 3500 rpm • Max vertical tool diameter: 35 mm • Max horizontal tool diameter: 12 mm • Max vertical drilling depth: 45 mm • Max horizontal drilling depth (X/Y): 30 mmCapacities • Max workpiece weight: 80 kg • Max workpiece size: X unlimited, Y 1200 mm, Z 50 mm • Min workpiece size: X 270 mm, Y 185 mm (70°), Z 4 mm • Feed rate: 25 m/minControl and software on machine • 19" 5/4 TFT LCD monitor • Industrial PC • WSC operator interface with Lister, parametric tooling, and parametric setup • CAD TPA EDI32 graphical programming, basic version • USB port • Saving of all files • Macro programming • Import of DXF filesUtilities and extraction interface • Dust extraction air volume: 2000 m³/h • Exhaust speed: 30 m/s • Exhaust ports: 2x Ø 100 mm + 1x Ø 50 mm • Motor: 1.7 kW • Compressed air: 7 bar • Max air consumption: 60 Nl/min • CE STANDARDS Additional equipment Dkedpsy Hrdzofx Agvsn • Office software – License

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 2,500 rpm, travel distance X-axis: 340 mm, travel distance Z-axis: 2,000 mm, spindle motor power: 20,000 W, controller manufacturer: SIEMENS, controller model: Sinumerik 810D, number of axes: 2, Horizontal turning machine manufactured in 2008. This Weiler E50x2000 features a center distance of 2000 mm and a swing over bed of 570 mm. It has a spindle bore of 83 mm and a maximum torque at the spindle of 1600 Nm. Fully overhauled in 2026, it includes significant upgrades for enhanced performance. If you are looking to get high-quality turning capabilities, consider the Weiler E50x2000 machine we have for sale. Contact us for further details. • Control system: Weiler D3 with Siemens Sinumerik 810D • Center distance: 2000 mm • Center height: 280 mm • Swing over bed: 570 mm • Swing over cross slide: 340 mm • Cross slide travel: 340 mm • Bed slide guide length: 560 mm • Spindle head: DIN 55025, size 8 • Spindle bore: 83 mm • Main spindle internal taper: Metric 90 Dedpfxey H E Akj Agvjkn • Main drive power: 20 kW (60% duty cycle); 17 kW (100% duty cycle) • Maximum spindle torque: 1600 Nm • Speed range: • Gear stage 1: 1–625 rpm • Gear stage 2: 4–2500 rpm • Tailstock quill diameter: 80 mm • Tailstock quill stroke: 200 mm • Tailstock quill taper: Morse taper 5 • Tool holder system: Multifix size C or Parat size 3 • Availability: machine available soon • Overhaul: will be fully overhauled in 2026 • Hardening and grinding of all bed guides; grinding of tailstock guides • Overhaul of complete bed and cross slide assembly (grinding/scraping of all guideways) • Renewal of bed slide sliding lining • Renewal or relining of keyways and lower guides • Installation of a tool system on a console (Multifix C or Parat Gr.3) • Overhaul of complete spindle housing assembly • Regrind main spindle (internal/external taper and face) • Renewal of main spindle bearings • Renewal of X-axis ball screw drive incl. bearings • Renewal of Z-axis ball screw drive incl. bearings • Overhaul of tailstock quill and bore; replacement of spindle and nut • Renewal of all guideway wipers • Replacement of all drive belts • Cleaning and testing of main spindle motor • Overhaul of existing safety devices • Replacement of defective rotary, rocker, and limit switches • Replacement of spindle and handwheel encoders • Cleaning and testing of the central lubrication unit • Replacement of movable cables and coolant hoses in the work area/to the monitor • Replacement of the membrane keypad (monitor) • Renewal of the energy chains • Painting in standard colors (standard texture) • DGUV and high-voltage testing with test report • Data backup of machine parameters/software • Geometric acceptance testing according to DIN 8605 Additional equipment • Optional accessory: chip conveyor availableThe machine will be overhauled in July the pictures are only refreneces of how it would look like. Technical Specification Counter Spindle No Driven Tools No

Condition: excellent (used), Year of construction: 2018, ENGEL duo 8160H/860W/1700 combi Machine type: ENGEL duo 8160H/860W/1700 combi Year: 2018 Machine version: 2-component machine Injection unit arrangement: H/W arrangement, one above the other, distance 300 mm Clamping force: 17,000 kN Min./max. mould height: 800 / 1,600 mm Max. opening stroke: 2,550 mm Max. platen distance: 3,350 mm Rotary table diameter: 2,250 mm Mould weight: DS: 30,000 kg AS with rotary table: 21,590 kg Total: 36,586 kg AS without rotary table: 25,790 kg Rotary table weight: 4,200 kg Injection unit 1 / 3660H Nozzle: hydraulic shut-off nozzle Nozzle radius: R35 Nozzle bore: Ø8 mm Screw diameter: 105 mm Max. stroke volume: 4,070 cm³ Max. shot weight PC-ABS: 4,600 g Max. shot weight PP: 3,700 g Max. shot weight PA6 GF30: 5,500 g Max. shot weight TPU: 4,960 g Injection unit 2 / 500W Nozzle: open nozzle Nozzle radius: R35 Nozzle bore: Ø4 mm Screw diameter: 50 mm Max. stroke volume: 432 cm³ Max. shot weight TPV 55 Shore: 390 g Max. shot weight EPDM 65 Shore: 483 g Tie bars / platens Tie-bar spacing horizontal: 1,850 mm Tie-bar spacing vertical: 1,415 mm Tie-bar diameter: 265 mm Centring rings Nozzle side: 1K Ø250 mm / 2K Ø200 mm, pitch 300 mm Ejector side: Ø250 mm Centring groove DS: 300 mm below nozzle centre, 100 × 32H8, depth 18 mm Ejector Max. ejector stroke: 300 mm Central ejector: without Thread: M20 Ejector rod diameter: Ø50 mm Limit monitoring connector: 4-pin Core pullers AS: 4× + 1× proportional valve DS: 4× + 1× proportional valve Core in: SKM13IR3 / alternative SKM10IR2 Core out: SKS13IR3 / alternative SKS10IR2 Limit monitoring connector: 16-pin according to Euromap 13 Valve gate control Hydraulic: 16-fold / SKM10IR2 / SKS10IR2 Dkedpfx Aszatkhsgvsn Pneumatic valves Ejector side: 1× blow function Nozzle side: 1× blow function Mould temperature control Ejector side: 16 circuits Nozzle side: 16 circuits Machine-side water connection: Hasco N9 Tool-side water connection: USA system DME N9 / alternative N6 Mould heating 64 control zones 8 plugs for sensors and heating 16-pin Robot / handling Robot: ENGEL viper 60-RC 300 Travel Z: 3,320 mm Travel X: 1,500 mm Travel Y: 2,600 mm C-axis: 210 Nm B-axis: 210 Nm Automation Conveyor belt for parts deposit Belt width: 1,600 mm Light barrier Special features iQ weight control Gas-assisted processing / blowing agent processing Injection compression moulding Cavity pressure sensors MuCell prepared, not yet installed Electrical data Main connection A: 3×400V + N + PE / 50 Hz Nominal current A: 0 A Rating A: 250 kW Main fuse A: 630 A Short circuit current rating: 10,000 A Control voltage: 230V AC / 24V DC Main connection B: Nominal current B: 210 A Rating B: 150 kW Main fuse B: 250 A

Condition: good (used), functionality: fully functional, Year of construction: 2004, overall weight: 300 kg, input voltage: 400 V, input frequency: 50 Hz, HOFFMANN FILTER FLEECE SYSTEM WITH REEL Dedpfxox T Ah Do Agvskn TYPE: HYDROSTAT HN0.6 MACHINE NO.: 0405364 YEAR OF MANUFACTURE: 2004 Technical Data: Operating Voltage: 400 V, 50 Hz Footprint incl. sludge tank: approx. 2055 x 1560 mm Filter area: 0.6 m² Filtration capacity (based on emulsion): approx. 165 l/min Inlet height: 488 mm Paint finish: RAL 9002, textured lacquer Weight: 300 kg Equipment: - Made of sheet steel, fully welded, base dimensions approx. 1500 x 1500 x 280 mm Filling capacity: approx. 460 l - 1 gear motor - 1 reel for winding up used filter fleece - 1 reel-disposal switch with “reel full” indicator - 1 coolant level switch - 2 pump mounts for user-supplied service pumps - 1 roll of filter fleece, width 1000 mm - 1 sludge tank - 1 complete electrical control system in a dustproof control cabinet with all switching, control, and monitoring devices, motor protection switches for each drive, control transformer, function indicator lamps, filter system wiring according to VDE 0113 - Documentation, 2 copies, German - EC Declaration of Conformity 98/37, Annex IIB

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 1,400 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 1,200 mm, controller manufacturer: FANUC, controller model: 31i CNC, total height: 3,760 mm, total width: 4,325 mm, overall weight: 26,000 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 35,000 W, number of slots in tool magazine: 60, tool weight: 30,000 g, product length (max.): 8,150 mm, number of axes: 4, This 4-axis DOOSAN HM 8000 horizontal machining center was manufactured in 2014. Equipped with Fanuc 31i CNC control, it features a maximum workpiece diameter of 1450 mm and weight capacity of 2000 Kg. It includes a high-pressure through-spindle coolant system, chip conveyor, and both workpiece and tool probes. If you are looking to get high-quality milling capabilities consider the DOOSAN HM 8000 machine we have for sale. Contact us for more information about this machine. • Max. workpiece diameter: 1450 mm • Max. workpiece weight: 2000 kg • Travel (X/Y/Z): 1400 x 1050 x 1200 mm • Pallet size: 800 x 800 mm • Spindle motor power: 22/35 kW • Max. torque: 1732 N·m • B-axis: indexable by degree • Max. tool diameter: 130/320 mm • Max. tool length: 630 mm Dkedpfjzar Aiox Agven Additional equipment • Belt-type oil skimmer • Triple light tower • Pallet centering device • Shower coolant • Through-spindle coolant 70 bar, 7.5 kW, with cyclone filtration • Automatic shutdown • Tool load monitoring • Chip conveyor • Workpiece probe OMP60 • Tool probe TS27R Dimensions Machine Depth 8150 mm Technical Specification Taper Size BT 50

Condition: used, Year of construction: 2024, New machine – Special price – Year of manufacture 2024 HAND GUARD Edition Single Flex unit. The image shows the system. HAND GUARD is based on early hazard detection to protect the operator from injuries and works in any application. The camera-monitored system first gives a visual warning to alert the user to an impending danger. If the hazard persists, the saw blade is lowered without causing any damage to the machine or material. HAND GUARD supports the processing of various materials such as wood, metal, and plastic. • Contactless and injury-free • Quick commissioning • 100% damage-free • Operates with concealed cuts • Does not need to be deactivated, permanent function • Max. 500 mm saw blade diameter can be fully retracted under the one-sided tilting saw unit as standard. Tilting range: 0 - 46°, equipped with a quick-change system for the main saw blade. Motorized height and tilt adjustment with a maximum saw blade protrusion of 179 mm (removal of the scoring unit may be required in some cases). Additionally, the control unit is positioned at eye level, allowing you to adjust the blade height and tilt, as well as, depending on the control package, the RPM and other functions. The new, clear industrial design marks the exceptional status of the Altendorf brand: This sliding table saw combines distinctive design with timeless aesthetics. The Altendorf double roller carriage is renowned for its smooth operation and precision. It can be locked steplessly in any position. The large double rollers keep the upper carriage absolutely precise in connection with the lower carriage within the respective guide rods. This running quality is maintained for decades, even under heavy use and contamination. The carriage construction is extremely torsion-resistant and dimensionally stable. An additional front support roller with a width of 300 mm is included, offering valuable support for cutting long workpieces on the rip fence. Positionable at 90° under the double roller carriage. 12" touchscreen with integrated keyboard • Automatic dimension correction at the rip and angle fence when tilting the saw unit • Stepless fine control of the axes via +/# keys • Easy axis calibration • Machine diagnostics, operating hours counter, USB interface • Recall last dimension entry (back function) • Conversion of pointed to blunt measurements at the rip and angle fence • Shear cut function with automatic calculation of missing angles or dimensions • Advanced tool management for up to 100 tool memory slots • Storage of scoring position (3-axis scorer) • Input for main blade core thickness & cutting width • Input for main tool speed Additional functions • Grooving: automatic step-by-step positioning of the rip fence • Chain dimension function: cutting sequences with identical distances at the rip fence • Oversize angle cut • Calculator function with result transfer to the axes • Geometric shapes, calculation of missing angles or dimensions • False miters, calculation of missing angles or dimensions • 9999 storable cutting programs • Standard provision for remote maintenance • Template holder directly next to the touchscreen Included accessories for Edition Single Flex: • Double roller carriage with carriage length of 3000 mm • Vario drive 5.5 kW (7.5 HP) VAR Dodpfx Agoyyap Eevokn