Used Mobile Work Table for sale (57,690)

Condition: good (used), Note: - The pictures serve to illustrate the material. - The metal crates, boxes etc. are not included in the scope of delivery. - The color of the material may vary. - The packing tables are picked unassembled; - The shelf stands are pre-assembled; - The production time is usually approx. 3-5 working days. Basic dimensions: Width: approx. 1,550 mm Height: approx. 2,000 mm Depth: 600 mm The scope of delivery includes: 02x shelf uprights, used Material color: grey Frame profile: PLFB155 Profile dimensions: P 100 x 68 x 2.25 mm Upright height: 2,000 mm Upright depth: 600 mm Incl. cross and diagonal struts, base plates The uprights are pre-assembled (bolted framework) 05x Shelf beams, used Material color: orange Truss type: PNBH0488 Box profile: 80 x 50 mm clear width: 1,350 mm 10x locking pins, used Version: sendzimir galvanized For securing the side rails against unintentional lifting out 01x chipboard, second-hand Chipboard thickness: 38 mm Chipboard width: 1,340 mm Depth of chipboard: 600 mm Surface: coated if required (two-piece if necessary) 01x chipboard, used Thickness chipboard: 38 mm Chipboard width: 1,340 mm Depth of chipboard: 600 mm Surface: coated if required (two-piece if necessary) 08x Locking bracket, new Version: galvanized f. Crossbeam width: 50 mm 03x Round ear, used Total length: 1,350 mm Tube Ø: approx. 30 mm 02x L-bracket, second-hand Material color: orange L-profile: approx. 60 x 60 mm Material thickness: 4.00 mm Total length: selectable Drill hole Ø: approx. 13 mm Hole spacing: approx. 50 mm 08x screws, M12 16x nuts, M12 04x screws, M10 04x nuts, M10 Dodet A U Ncepfx Adaeur Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: new, Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Mr.: Simon Blank Included in delivery are: 01x workbench frame, new Material color: anthracite total width: approx. 1.400 mm total height: approx. 900 mm total depth: approx. 600 mm 01x Worktop, new total width: approx. 1.400 mm total depth: approx. 600 mm Notes: - The workbenches are commissioned unassembled General information about the item: This item is offered for pickup only. Any additional transport or shipment of this item or a shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet Dsdpfx Ajh Euqledasur (without unloading)

Condition: good (used), Basic dimensions: Width: approx. 3,180 mm Height: approx. 900 mm Depth: approx. 600 mm Technical data for the workbench frame: Manufacturer: Dexion Type: P 90 The scope of delivery includes: 02x workbench stand, used Material color: green Stand height: 900 mm Stand depth: 600 mm Incl. cross and diagonal struts, foot plates The stands are pre-assembled ( bolted framework ) 04x Workbench traverse, used Material color: orange Truss profile: I: 120 x 50 mm clear width: 3,000 mm 08x locking pin, used Version: sendzimir galvanized For securing the side rails against unintentional lifting out Remark: - The pictures serve to illustrate the material. - The material color may vary. - The workbench frames are commissioned unassembled; - The workbench stands are pre-assembled; - The production time is usually approx. 3-5 working days. You are also welcome to purchase the workbenches from us in the following depths: Workbench frame 3,180 x 700 mm / 2 levels / (184.00€ incl. 19% VAT) Workbench frame 3,180 x 800 mm / 2 levels / (186.00€ incl. 19% VAT) Workbench frame 3,180 x 900 mm / 2 levels / (188.00€ incl. 19% VAT) Workbench frame 3,180 x 1,000 mm / 2 levels / (190.00€ incl. 19% VAT) Workbench frame 3,180 x 1,050 mm / 2 levels / (192.00€ incl. 19% VAT) Workbench frame 3,180 x 1,100 mm / 2 levels / (194.00€ incl. 19% VAT) Workbench frame 3,180 x 1,200 mm / 2 levels / (198.00€ incl. 19% VAT) Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Dodeth N Shspfx Adasur General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: used, Basic dimensions: Width: approx. 2,500 mm Height: approx. 938 mm Depth: approx. 900 mm Technical data for the workbench: Manufacturer: Polypal Type: Stockpal The scope of delivery includes: 02x workbench stand, used Material color: anthracite Stand height: 900 mm Stand depth: 900 mm Incl. cross and diagonal struts, foot plates The stands are pre-assembled ( screwed framework ) 04x Workbench traverse, used Material color: orange Box profile: 120 x 50 mm clear width: 2,300 mm 08x Locking pin, second-hand Version: sendzimir galvanized For securing the side rails against unintentional lifting out 01x Chipboard II. Choice, used Chipboard thickness: 38 mm Chipboard width: 2,500 mm Depth chipboard: 900 mm Surface: possibly coated (two-piece if required) 01x Chipboard II. Choice, used Chipboard thickness: 38 mm Chipboard width: 2,280 mm Depth chipboard: 900 mm Djdjtgkwmepfx Adajur Surface: possibly coated (two-piece if required) 06x drilling screw, new Finish: galvanized Dimensions: 6.3 x 70 mm 04x Z-bracket, used for locking / inserting chipboard galvanized surface Remark: - The pictures serve to illustrate the material. - The material color may vary. - The workbench frames are commissioned unassembled; - The workbench stands are pre-assembled; - The production time is usually approx. 3-5 working days. You are also welcome to purchase the workbenches from us in the following depths: Workbench 2,500 x 600 mm / 2 levels / (221.00€ net) Workbench 2,500 x 700 mm / 2 levels / (229.00€ net) Workbench 2.500 x 800 mm / 2 levels / (238,00€ net) Workbench 2,500 x 1,000 mm / 2 levels / (254.00€ net) Workbench 2,500 x 1,050 mm / 2 levels / (259.00€ net) Workbench 2,500 x 1,100 mm / 2 levels / (263.00€ net) Workbench 2,500 x 1,200 mm / 2 levels / (271.00€ net) Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: good (used), Included in the scope of delivery: 01x Workbench, used Subframe dimensions: approx. 1,340 x 700 mm Height to top edge of worktop: approx. 938 mm Worktop dimensions: approx. 1,400 x 1,000 mm Material thickness: approx. 38 mm Comprising the following for EACH unit: 02 x Workbench stands, used Manufacturer: Dexion Type: P 90 Material color: sendzimir galvanized Profile dimension: 100 mm Including cross and diagonal braces, base plates The stands are pre-assembled Dedpfsx Itdlex Adaour (bolted truss construction) 900 mm high 700 mm deep 04 x Workbench beams, used Racking system: Dexion Type: Speedlock P90 Material color: sendzimir galvanized Box profile: 89 x 50 mm Beam type: SLO089|2 Clear span: 1,140 mm 08 x Dexion safety pins, used Type: Speedlock P90 Material color: sendzimir galvanized Head Ø: 13.58 mm Pin Ø: 5.92 mm Weight per piece: 0.018 kg Chipboard panels, 2nd grade, used Thickness: 38 mm Dimensions: 01x 1,400 x 1,000 mm 01x 1,120 x 700 mm Surface: possibly coated (single piece) 08 x Wing screws with countersunk head, new Dimensions: 6.3 x 70 mm Note: - Workbenches are picked unassembled; - Workbench stands are pre-assembled; - The production lead time is usually approx. 3 - 5 working days. Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for collection. If shipping or further transport is required, additional costs will apply, which can be individually requested from us depending on the delivery location and scope.

Condition: good (used), Basic dimensions: Width: approx. 2,470 mm Height: approx. 900 mm Depth: approx. 600 mm Technical data for the workbench frame: Manufacturer: Polypal Type: Stockpal The scope of delivery includes: 02x workbench stand, used Material color: anthracite Stand height: 900 mm Stand depth: 600 mm Incl. cross and diagonal struts, foot plates The stands are pre-assembled ( screwed framework ) 04x Workbench traverse, used Material color: orange Box profile: 120 x 50 mm clear width: 2,300 mm 08x Locking pin, second-hand Version: sendzimir galvanized For securing the side rails against unintentional lifting out Remark: - The pictures serve to illustrate the material. - The material color may vary. - The workbench frames are commissioned unassembled; - The workbench stands are pre-assembled; Duedpfsth N Slox Adaer - The production time is usually approx. 3-5 working days. You are also welcome to purchase the workbenches from us in the following depths: Workbench frame 2,470 x 700 mm / 2 levels / (166.00€ incl. 19% VAT) Workbench frame 2,470 x 800 mm / 2 levels / (168.00€ incl. 19% VAT) Workbench frame 2,470 x 900 mm / 2 levels / (170.00€ incl. 19% VAT) Workbench frame 2,470 x 1,000 mm / 2 levels / (172.00€ incl. 19% VAT) Workbench frame 2,470 x 1,050 mm / 2 levels / (174.00€ incl. 19% VAT) Workbench frame 2,470 x 1,100 mm / 2 levels / (176.00€ incl. 19% VAT) Workbench frame 2,470 x 1,200 mm / 2 levels / (178.00€ incl. 19% VAT) Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: used, Basic dimensions: Dsdpfx Aethfddsdaeur Width: approx. 3,200 mm Height: approx. 938 mm Depth: approx. 600 mm Technical data for the workbench: Manufacturer: Dexion Type: P 90 The scope of delivery includes: 02x workbench stand, used Material color: green Stand height: 900 mm Stand depth: 600 mm Incl. cross and diagonal struts, foot plates The stands are pre-assembled ( bolted framework ) 04x Workbench traverse, used Material color: orange Truss profile: I: 120 x 50 mm clear width: 3,000 mm 08x locking pin, used Version: sendzimir galvanized For securing the side rails against unintentional lifting out 01x Chipboard II. Choice, used Chipboard thickness: 38 mm Chipboard width: 3,200 mm Depth chipboard: 600 mm Surface: possibly coated (two-piece if required) 01x Chipboard II. Choice, used Chipboard thickness: 38 mm Chipboard width: 2,980 mm Depth chipboard: 600 mm Surface: possibly coated (two-piece if required) 06x drilling screw, new Finish: galvanized Dimensions: 6.3 x 70 mm 08x Z-bracket, used for locking / inserting chipboard Surface galvanized Remark: - The pictures serve to illustrate the material. - The material color may vary. - The workbench frames are commissioned unassembled; - The workbench stands are pre-assembled; - The production time is usually approx. 3-5 working days. You are also welcome to purchase the workbenches from us in the following depths: Workbench 3,200 x 700 mm / 2 levels / (271.00€ incl. 19% VAT) Workbench 3.200 x 800 mm / 2 levels / (282,00€ incl. 19% VAT) Workbench 3.200 x 900 mm / 2 levels / (293,00€ incl. 19% VAT) Workbench 3,200 x 1,000 mm / 2 levels / (304.00€ incl. 19% VAT) Workbench 3,200 x 1,050 mm / 2 levels / (309.00€ incl. 19% VAT) Workbench 3.200 x 1.100 mm / 2 levels / (315,00€ incl. 19% VAT) Workbench 3,200 x 1,200 mm / 2 levels / (325.00€ incl. 19% VAT) Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: good (used), Basic dimensions: Width: approx. 3,180 mm Height: approx. 900 mm Depth: approx. 600 mm Technical data for the workbench frame: Manufacturer: Dexion Type: P 90 The scope of delivery includes: 02x workbench stand, used Material color: green Stand height: 900 mm Stand depth: 600 mm Incl. cross and diagonal struts, foot plates The stands are pre-assembled ( bolted framework ) Djdpfxsthi Hue Adaour 04x Workbench traverse, used Material color: orange Truss profile: I: 120 x 50 mm clear width: 3,000 mm 08x locking pin, used Version: sendzimir galvanized For securing the side rails against unintentional lifting out Remark: - The pictures serve to illustrate the material. - The material color may vary. - The workbench frames are commissioned unassembled; - The workbench stands are pre-assembled; - The production time is usually approx. 3-5 working days. You are also welcome to purchase the workbenches from us in the following depths: Workbench frame 3,180 x 700 mm / 2 levels / (184.00€ incl. 19% VAT) Workbench frame 3,180 x 800 mm / 2 levels / (186.00€ incl. 19% VAT) Workbench frame 3,180 x 900 mm / 2 levels / (188.00€ incl. 19% VAT) Workbench frame 3,180 x 1,000 mm / 2 levels / (190.00€ incl. 19% VAT) Workbench frame 3,180 x 1,050 mm / 2 levels / (192.00€ incl. 19% VAT) Workbench frame 3,180 x 1,100 mm / 2 levels / (194.00€ incl. 19% VAT) Workbench frame 3,180 x 1,200 mm / 2 levels / (198.00€ incl. 19% VAT) Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: new, Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Mr.: Simon Blank Included in delivery are: 01x workbench frame, new Material color: anthracite total width: approx. 1.750 mm Duodpfx Adsh Euk Usajr total height: approx. 865 mm total depth: approx. 600 mm 01x Worktop, new total width: approx. 1.750 mm material thickness: approx. 35 mm total depth: approx. 600 mm Notes: - The workbenches are commissioned unassembled General Item Information: This item is offered for pickup only. Any additional transport or shipment of this item or a shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: good (used), Note: The images are for illustrative purposes only. - The workbench frames are commissioned unassembled; - Production time is typically approximately 3-5 business days. Basic dimensions: Width: approx. 1,250 mm Depth: approx. 700 mm Height: approx. 940 mm Included in delivery: 4x square tubes, used Material color: Sendzimir galvanized Profile height: approx. 900 mm Square profile: 140 x 140 x 4 mm Drill hole pitch: 75 x 50 mm Drill hole diameter: 13 mm 2x CS Sigma profiles, used Material color: Sendzimir galvanized CS Sigma profile: approx. 300 x 75 x 20 mm Profile length: approx. 970 mm 2x CS Sigma profiles, used Material color: Sendzimir galvanized CS Sigma profile: approx. 300 x 75 x 20 mm Profile length: approx. 420 mm 1x chipboard, used Thickness Chipboard: 38 mm Chipboard width: 1,250 mm Chipboard depth: approx. 700 mm Surface: coated if necessary (two-part if necessary) 6x self-drilling screws, new Version: galvanized Dimensions: 6.3 x 70 mm 16x screws: M12 16x nuts: M12 16x washers: M12 Your contact person in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Requesting additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery. Dsdpewgicbjfx Adasur

Condition: like new (used), Year of construction: 2019, Arburg 1200 T 2000-800 (vertical machine with rotary table 1200mm) Clamping unit 2000T Table diameter: 1200mm Angle rotation: 180 degrees Clamping force: 200 tons Opening force max. kN/mm: 115/500 Platen daylight max. : 600 mm Injection unit Screw diameter: 45 mm Shot volume: 318 cm3 Shot weight: 291 g Injection pressure: 2470 bar 1. Model: T model 2. Machine type: 1200 T 2000 - 800 3. Plasticizing unit: Thermoplastics cylinder 45 mm, highly wear-resistant 4. Screw: Reinforced screw coupling for splined coupling geometry 5. Control system: SELOGICA ‘direct’ controller 6. Technology stage: Stage 2 servo-regulated with 2 control pumps 7. Rotary table: Advanced ergonomics special model, 2-station 180° forward/backward alternating 8. Nozzle: Open nozzle 45 mm with nozzle tip 9. In-mould needle nozzles: Electric & hydraulic control for needle nozzle 1, electric & pneumatic control for needle nozzle 2 10. Heating: Heater band for open nozzle, 9 electric heating control circuits for mould heating Dujdpfx Adewugczjajr 11. Clamping platen: Mould mounting platen set, central diameter 125 mm 12. Blow unit: Mould blow unit with pressure reducer at station 1 13. Safety: Optical barrier at loading station, continuous oil cooling and filtration 14. Hopper: Adapter (extension) for feed hopper, machine delivered without 50 L hopper 15. Robot interface: Interface for robot system for station 2 & 3 (based on EM67/1) 16. Electric axes: Basic equipment for electric axes control 17. I/O: 4 programmable inputs/outputs on terminal rail 18. Sockets: Additional socket combination (1 CEE, 1 Schuko) 19. Interfaces: Temperature control device interface (REGLOPLAS), printer USB interface, Compact Flash, EUROMAP 65 chip card user authorisation 20. Acoustic alarm: Error alarm acoustic signal 21. Safety interlock: Interface for safety interlock of door (EUROMAP 73) 22. Cooling circuits: 3 regulated machine-related cooling circuits with flow indicator, 3 manually adjustable cooling circuits for second water manifold 23. Anti-corrosion: Anti-corrosion treatment for rotary table, sealing lip on outer diameter 24. Manual & labels: CD operating manual & spare parts list, Slovak language labels 25. Machine feet: Anti-vibration footplates 26. Other: Hydraulic ejector, external cycle start key, standard equipment packages, new ARBURG colour scheme 27. Display languages: IT/EN/SK

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 1 h, power: 25.5 kW (34.67 HP), axle configuration: 4x4, load capacity: 230 kg, lifting height: 20,370 mm, lifting power: 230 kg/m, platform length: 2,100 mm, platform width: 800 mm, overall weight: 10,050 kg, construction height: 2,710 mm, fuel type: diesel, fuel tank capacity: 78 l, tire size: 1025 x 365 mm, tire condition: 100 %, color: red, Equipment: all wheel drive, soot filter, === KEY SPECIFICATIONS === Year of manufacture: 2025 Hours: New / 1 h Working height: 20.37 m Maximum horizontal outreach: 11.99 m Platform capacity: 230 kg Platform dimensions (L x W): 2.10 x 0.80 m Turret rotation: 360° continuous Platform rotation: Yes, 90° left / 90° right Boom type: Articulated boom Jib: Yes, pendular jib (+69° / −66°) Drive: Diesel Four-wheel drive: Yes (4WD) Tyres: Rough terrain, Super Elastic Solid Cushion (1025 x 365 mm) Outriggers / stabilisers: No Engine manufacturer: Yanmar 3TNV88C Emission class: Stage IIIA Operating weight: 10,050 kg CE certification: Yes === HIGHLIGHTS === Carefully selected from reliable sources with verifiable history Dsdpfxsyg Dius Adajur CE certified and supplied with full documentation Ready for immediate transport and operation Extensive technical documentation available === CONDITION === Excellent working condition. Fully inspected, serviced and tested by certified professionals. Inspection available upon request. === LOCATION & PRICE === Located in Sittard, the Netherlands. Worldwide delivery available. Price on request (EXW / excl. VAT). Reliable machines with full service history and professional technical support. All machines are fully inspected, CE certified and ready for immediate use. Spare parts and professional assistance available upon request. === DELIVERY === Crane loading available on request. Flexible shipping solutions tailored to your destination and logistics requirements. All transports are professionally handled by the Collé Rental & Sales logistics team.

Condition: as good as new (ex-display), This is a solidly built stainless steel worktable with a total of 16 slots for GN 1/1. On the worktop are pegs for mounting two combi steamers Rational SCC/CM(P) from year of manufacture 2004. In addition, the worktop has two bushings for the supply lines of the combi steamers. The table is in top condition. The stated price is net plus 19% VAT. OUR USED EQUIPMENT SERVICE FOR YOU: Duodpfjn Hvymsx Adaor -High-quality brand equipment at fair prices -professional overhaul / inspection & professional cleaning -tested & fully functional - or money back -Dispatch or self-collection flexibly selectable -Competent advice - before and after purchase -provision of operating instructions, connection diagrams & spare parts -testing according to DGUV V3 seal Technical data: -external dimensions WxDxH: 1750x880x920mm -height adjustable feet -16 shelves for GN 1/1 -including spigots for mounting 2 Rational SCC/CM(P) -2 openings for supply lines from the combi steamers Condition: Used, fully functional VERSAND / SHIPPING: -Delivery or pickup by arrangement -Worldwide shipping on request / Worldwide shipping on request -Shipping to islands or mountain stations only by arrangement You have questions, wish a consultation or would like to look at something on site ? You can reach us by phone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. The sale takes place exclusively to our general trading conditions (AGB)

Condition: used, functionality: fully functional, Year of construction: 2011, power: 3 kW (4.08 HP), load capacity: 200 kg, lifting height: 1,990 mm, platform width: 990 mm, overall weight: 2,650 kg, fuel type: electric, color: red, We are offering this used Manitou 100 VJR Evolution self-propelled work platform, year of manufacture 2011. Model designation: 100 VJR Evolution Serial number: 598803 Year of manufacture: 2011 Unladen weight: 2,650 kg Power output: 3 kW Voltage: 24 V Max. indoor load capacity: 200 kg Max. outdoor load capacity: 200 kg Max. number of persons indoors: 2 Max. number of persons outdoors: 2 Attachment weight indoors: 40 kg Attachment weight outdoors: 120 kg Manual force indoors: 40 daN Manual force outdoors: 20 daN Max. tilt angle indoors: 2° Max. tilt angle outdoors: 2° Max. wind speed indoors: 0 m/s Max. wind speed outdoors: 12.5 m/s If you have any questions or require further information, please feel free to send us a message or call us. Duedpeyfnuxofx Adaer

Condition: new, functionality: fully functional, Year of construction: 2023, operating hours: 1 h, load capacity: 159 kg, lifting height: 8,000 mm, lifting power: 159 kg/m, platform length: 730 mm, platform width: 750 mm, overall weight: 1,285 kg, fuel type: electric, tire size: Ø 323 × 100 mm, tire condition: 100 %, wheelbase: 1,070 mm, transport length: 1,390 mm, transport width: 760 mm, transport height: 1,990 mm, === KEY SPECIFICATIONS === Year of manufacture: 2023 Operating hours: 1 h Working height: 8.00 m Platform height: 6.00 m Platform capacity: 159 kg Platform dimensions (L x W): 730 × 750 mm Slewing range: n.a. (vertical mast lift) Drive at height: Yes Dusdpfxoyfb Hhs Adaer Drive type: Electric / Battery Battery condition: Good Tyres: Non-marking, solid Transport width: 760 mm Transport height (stowed): 1,990 mm Weight: 1,285 kg CE certified: Yes === HIGHLIGHTS === Carefully selected from reliable sources with verifiable history CE certified with full documentation included Ready for immediate transport and operation Comprehensive technical documentation available === CONDITION === Excellent working condition – fully inspected, serviced and tested by certified professionals. Inspection available upon request. === LOCATION & PRICE === Located in Sittard, the Netherlands. Worldwide delivery possible. Price: € 13.995 (EXW / excl. VAT) Reliable electric self-propelled vertical mast lift, ideal for indoor maintenance, warehouse operations and industrial applications. Compact design with non-marking tyres, drivable at full working height and low maintenance requirements. Fully CE compliant and ready for immediate use. === DELIVERY === Crane loading available on request for smooth shipment. Flexible transport solutions tailored to your destination and logistical requirements. All transports are professionally handled by the logistics team of Collé Rental & Sales.

Condition: good (used), Workbench, work table, assembly bench, assembly table, worktable, mobile workbench, sewing machine table -Work table: Electrically height-adjustable work table, solid construction with casters Dusdpfx Adexy Ikusaer -Tabletop: 1400 x 700 mm -Height: 810 to 1180 mm -Drive motor: Baifu 51K120GU-CM-P 230V 120W -Base: 4 swivel casters with locking brakes -Transport dimensions: 1400/700/H810 mm -Weight: 62 kg

Condition: used, functionality: fully functional, Year of construction: 2016, load capacity: 150 kg, lifting height: 3,500 mm, color: blue,

Condition: good (used), approx. 4 - 5 pieces work tables, height adjustable - used - : Price ex location: 400.-€ (net), disassembled, packed and loaded! Manufacturer: Herbert Grüttner type: Modulus Year of manufacture: unknown, height adjustable - with motor Type 1 - 1 piece: table top with semicircular cutout width: ca. 1,60m width back side: ca. 1,30m height back side: ca. 1,28m Duedpfski Tv Ejx Adasr total height back: 1,90m total height incl. lamp: ca. 2,10m Depth: narrow side of the worktop: ca. 95cm total depth of the table at the narrow side: ca. 1,05m Type 2 - 2 pieces: table top approx. W: 2m x 1m total height approx. 2,20m Type 3 - 1 piece: table top approx. W: 1,60m x 0,75m total height approx. 2,20m Type 4 - 1 piece: Table top approx. 0,90mm x 1,30m Condition: good Available: from end of Oct./Nov. 2021 Location: Warehouse Frankenberg (Saxony)

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 4,566 h, load capacity: 450 kg, lifting height: 38,010 mm, fuel type: diesel, Note: Hoses are partially porous and older than 10 years Duedpfsx Uwbzex Adasr

Condition: new, Year of construction: 2023, machine/vehicle number: 11311387, power: 36.5 kW (49.63 HP), load capacity: 230 kg, overall weight: 6,800 kg, fuel type: diesel, fuel tank capacity: 65 l, tire size: 33*12-20, color: red, transport length: 6,870 mm, transport width: 2,000 mm, transport height: 2,300 mm, Equipment: all wheel drive, Brand: Mantall Type: HZ160JRT Engine: Kubota V2403, DOC + DPF - Stage V Working height: 16 m Platform height: 14 m Dsdpfetk Hkbox Adaour Bucket capacity: 230 kg Horizontal reach: 8.4 m Platform dimensions: 1170 x 1800 mm Width: 2000 mm Ground clearance: 360 mm Clearance height: 2000 mm Travel speed: 4.9 - 7 km/h Rotation: 360° discontinuous

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 2 h, axle configuration: 4x4, load capacity: 227 kg, lifting height: 12,100 mm, lifting power: 227 kg/m, platform length: 1,050 mm, platform width: 700 mm, overall weight: 3,460 kg, construction height: 1,990 mm, fuel consumption per hour: 1 l/h, fuel tank capacity: 25 l, tire condition: 100 %, wheelbase: 1,600 mm, color: green, Equipment: all wheel drive, === KEY SPECIFICATIONS === Year of manufacture: 2025 Hours: 9 h Working height: 12.1 m Maximum horizontal outreach: 6.4 m Platform capacity: 227 kg Platform dimensions (L × W): 1050 × 700 mm Upper boom rotation: 360° Platform rotation: No Boom type: Articulated (knuckle boom) Jib: Yes Drive type: Hybrid (Electric + Engine) Four-wheel drive: Yes (4×4) Tyres: Rough-terrain Stabilisers: No Engine manufacturer: Kubota (Hybrid system) Emission standard: Stage V Weight: 3460 kg CE certification: Yes === HIGHLIGHTS === Carefully selected from trusted sources with verifiable ownership and service history CE-certified and delivered with full documentation Ready for immediate transport and operation Complete technical documentation available === CONDITION === Excellent working condition — fully inspected, serviced, and tested by certified professionals. Inspection on site available upon request. === LOCATION & DELIVERY === Located in Sittard, The Netherlands Worldwide delivery available Price €51,000 (EXW / excluding VAT) Reliable machine from a first owner with full maintenance history and expert technical support. Benefit from one of Europe’s largest stocks of access platforms and construction machinery. All machines are fully inspected, CE-approved, and ready for immediate use. Dodpfjx A Elzsx Adaour Spare parts and professional technical assistance available upon request. === SHIPPING === Crane loading available for smooth and safe transport. Flexible global shipping options tailored to your destination and logistics needs. All logistics handled by the professional Collé Rental & Sales team.

Condition: new, Year of construction: 2026, functionality: fully functional, BS10U 80° 1-table solution is used when producing open panels, curtain walls or other open component (floor, roof). Available in lengths: 6000 mm, 7500 mm, 9000 mm, 12 000 mm. Can be equipped with a number of options: Hole beams, adding flexibility in production of building elements less than 2250 mm in height or when producing angled shaped walls etc. Hydraulic squaring instead of the standard solution Pneumatic squaring. Duodpfxox Tdtnj Adaor Extended width adjustment in production of elements higher than 3100 mm (< 3650 mm). Rollers for transport elements in horizontal position enables production lines with BS20 system.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, overall weight: 1,500 kg, Professional grinding table, scissor type with built-in fume and dust extraction. Used in grinding, polishing, soldering, welding and cleaning processes with hand tools. Built-in metal pre-filter, which separates coarse dust particles, metal filings and is designed to capture sparks so that they do not get into the filter (spark catcher). Electrically lifted table. Table equipped with rollers and pneumatic connections for connecting tools. New filter inserts have been installed in the extractor. Built-in table lighting. Device in very good condition. Parameters: Extraction capacity - 3000 m3/h Negative pressure - 2400 Pa Year of manufacture - 2011 Work table width - 1.90m Djdpfxsv Tbaaj Adaour Work table depth - 0.80m Overall dimensions: Work table: Length - 2.10m Depth - 1.40m Height - 2.30m Extraction: Length - 1.20m Width -1.00m Height - 2.35m Total weight - 1500 kg

Condition: new, This is a solid stainless steel worktable, left side closed, 6 adjustable feet, with a shelf and a 50 mm upstand. Due to its solid construction, it is also very suitable for food production facilities. The worktable is new and unused, still laminated. The price quoted is net less 25% special discount plus 19% VAT. Your offer price is € 1007.78 net. OUR USED EQUIPMENT SERVICE FOR YOU: High-quality branded appliances at fair prices Professional overhaul / inspection & expert cleaning tested & fully functional - or money back Shipping or self-collection flexibly selectable Competent advice - before and after the purchase Provision of operating instructions, connection diagrams & spare parts Inspection in accordance with DGUV V3 seal TECHNICAL DATA: External dimensions WxDxH: 2700x850x900mm Backsplash 50mm Left side closed one shelf Dsdpfxjln Udpe Adaour Condition: New, unused VERSAND / SHIPPING: Delivery or collection by arrangement Weltweiter Versand auf Anfrage / Worldwide shipping on request Shipping to islands or mountain stations by arrangement only Do you have any questions, would you like advice or would you like to see something on site? You can reach us by phone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sales are subject exclusively to our general terms and conditions (AGB)

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, operating hours: 900 h, lifting height: 6,000 mm, lifting power: 227 kg/m, overall weight: 1,500 kg, construction height: 8,000 mm, fuel type: electric, tire condition: 90 %, Electric scissor lift, very good condition. CHECK IF ISCIR CERTIFICATION IS VALID! Duodpfx Aewkq Iyjdajr