Used Mobile Dust for sale (10,656)

Condition: new, Year of construction: 2026, The manufacturer guarantees the cleaning quality The system of automatic vibrating cleaning of the filter cloth - during breaks and during filter operation, it allows for constant monitoring of the correct operation. Technical specifications: • Conforms to H-2 standard • Extraction capacity ~ 4500 m3/h • Motor power 3.0 kW • Speed 3000 rpm Hsdpfx Asgyfmajcnst • Voltage 400V, 50Hz • Suction connection 200 mm • Polyester filter material, 5 microns • Filter surface 8.8 m2 • Speed 28 m/sec. • Number of filters 18 • Dimensions 752 x 1502 x 2144 mm • Weight 180 kg • Category of filters G • Polyester filter material • Noise 80 dB without connection, 65 dB when connected to the machine via pipe Delivery set: - 5 micron polyester filter - 1 container - Running gear - Filter cleaning using a controlled vibration system - Fire extinguisher - Fulfill H-2 Norms + 850 euros for the model with fire extinguisher (Safe System)

Condition: used, Year of construction: 1990, machine/vehicle number: 35381, Schwertfalzwerk - Mobile Folding Knife Stahl VFZ 52Year 1990 - Serial-No. 35381-145531 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Hedpfsh R D Sbox Acnet

Condition: excellent (used), - Total air flow rate: 70.000 m3 /h - 610 m2 (squared meters of total developed filtering surface/area) - No. 540 filtering bags (each diameter mm 120 x length mm 3000) Hedpeh Icn Sefx Acnst - Average speed of the air in the filter: 1,86 m / sec - Electro-Fan type TRMV 1401 diam 1000, power KW 132 (HP 176)

Condition: good (used), Year of construction: 2010, Dust extraction, filter ventilation, welding fume extraction, self-cleaning cartridge filter, pneumatic, vacuum TEKA AIRTECH P18. Hodjib Dadjpfx Acnot The main areas of application for these systems are industrial plants/welding shops where it is not possible to implement point extraction or where point extraction is insufficient to maintain air quality in the workshop. Side-mounted ducts with a pollution capture point draw in contaminated air and direct it to the filter section. Here, pollutants in the form of fine particles accumulate on the surface of the cartridge filter. Compressed air pulses clean the cartridge filters automatically at required intervals. After the compressed air hits, the particles collected on the filter surface detach and fall into the dust collection tank. The cleaned air returns to the work area through individually adjustable long-range nozzles. At the same time, the discharge of the cleaned air directs the contaminated air in the workshop towards the extraction ducts. The filter is cleaned by a microprocessor controller with compressed air pulses during operation, which results in high device efficiency. Low compressed air consumption thanks to the "Power-Spray" system. The AIRTECH series of devices is certified by IFA in accordance with EN ISO 15012-1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent, local welding fume extraction unit. Parameters: Capacity - 18,000 m3/h Motor power - 11 kW Vacuum - 2250 Pa Filtration area - 324 m2 (9 filter cartridges, each 36 m2) Fan in a sound-absorbing housing Control cabinet with electrical documentation Noise level - 72 dB Year of manufacture - 2010 Dimensions: Height - 5.00 m Base width - 1.44 m x 1.44 m Width with outlet ducts - 8.5 m Total weight approximately 2400 kg

Condition: used, Centrifugal fan, dust extractor fan, fan, extractor, dust fan -Motor: HEW type EEXF 132S/2 -Motor power: 4.6 kW -Speed: 2880 rpm -without: housing -Impeller outside: Ø 415 mm Hodpfx Acofmd R Ujnst Sheet metal plate hole circle: Ø 470/13 mm -Dimensions: Ø 500/595 mm -Weight: 68 kg

Condition: used, Mobile motor jack crane, mobile pillar jib cranes, mobile pillar jib crane, assembly cranes, assembly cranes, workshop cranes, workshop cranes, pillar jib cranes, indoor cranes, workplace cranes -Transportable engine jack -incl.: manual trolley -with: cable -Load capacity: kg -Projection: 2,000 mm Hsdpjdpyzkefx Acnjt -Total height: max. 2,850 mm -Number: 1x available -Price: per piece -Transport dimensions: 1640/1515/H1585 mm -Own weight: 190 kg

Condition: good (used), Year of construction: 1985, radial fan, dust extraction blower, fan, extraction, dust blower -Motor power: 0.4 kW Hsdpfxocii N Sj Acnot -Speed: 1276 rpm -Total pressure: 260 Pa -Volume flow rate: 3200 m³/h -Inlet connection: Ø 400 mm -Outlet connection: 360/470 mm -Dimensions: 1130/560/H780 mm -Weight: 106 kg

Condition: used, Centrifugal fan, dust extractor fan, fan, extractor, dust fan -Motor power: 3 kW -Voltage: 380/660 V -Speed: 2870 rpm -Volume flow: m³/h -Connection input: Ø 310 mm -Connection output: 400 x 200 mm Hsdofdmg Sjpfx Acnjt -Dimensions: 1000/680/H1030 mm -Weight: 254 kg

Year of construction: 2003, condition: used, Centrifugal fan, dust extractor fan, fan, extractor, dust fan Hsdpfx Aod Tir Njcnot -The fan comes: from a chip filter system -Motor: Siemens type 1L4 207-6AA60-Z 200L -Motor power: 22 kW -Speed: 975 rpm -without: housing -Impeller outer diameter: 960 mm -wing height: mm -Dimensions: 1425/1115/H1390 mm -Weight: 412 kg

Year of construction: 2000, condition: used, centrifugal fan, dust extraction fan, fan, suction, dust blower -Manufacturer: Rippert, centrifugal fan in soundproof housing -Type: HL560/710-200 -Motor: 5 kW 1435 rpm -Volume flow: 12,000 m³/h Hedpfx Aslzmylecnot -Inlet/Outlet connection: Ø 500 mm, see photos -Dimensions: 1945/1515/H2350 mm -Weight: 600 kg

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, suction capacity: 1,100 m³/h, negative pressure: 3,200 Pa, Welding fume extractor, dust extraction unit, self-cleaning, pneumatic, vacuum type by KEMPER. Suitable for welding, grinding, and all types of dry dust. Self-cleaning welding fume filter with contamination-free dust collection. The mobile KEMPER MaxiFil Clean cartridge filter is designed for continuous operation, suitable for high-concentration welding fumes and dust filtration. Appropriate for all welding methods with carbon steel, low-alloy and high-alloy steel, as well as aluminium. Cost-effective operation thanks to the long service life of the filter cartridge. Hedpfxetq E Sie Acnjt Due to IFA-W3 certification, the basic version of the filter can be used for welding high-alloy steels. Specifications: Airflow capacity: 1,100 m³/h Maximum negative pressure: 3,200 Pa Three-phase fan motor: 1.5 kW Filter surface area: 15 m² Year of manufacture: 12/2023 Cartridge filter element with PTFE membrane Filtration efficiency: > 99.97% Built-in delay time controller for start-stop operation. With the optional start-stop sensor connected, the extraction delay after welding can be set between 5 to 60 seconds. Stock no.: 1071

Condition: used, Year of construction: 2010, Welding fume filter, welding fume extraction, soldering fume extraction, mobile filter unit, welding fume extractor -Manufacturer: Euromate, mobile welding fume extraction with 2 extraction pipes -Type: MFD -Drive: 0.75 kW -Filter: with contamination indicator -Suction pipes: length 2900 mm -Transport dimensions: 1200/800/H1100 mm Hodpfjrzvw Tsx Acnst -Weight: 101 kg

Condition: used, Centrifugal fan, dust extractor, fan, exhaust, dust fan, welding fume extractor -Motor power: 0.65 kW -Speed: 2840 rpm -max. volume flow: 0.41 m³/h -max. pressure: 804 kp/m² -Connection input: Ø 65 mm -Connection output: Ø 62 mm -Impeller: Ø - mm Hodocuauyepfx Acnst -Connection: 400 volts -Dimensions: 580/540/H450 mm -Weight: 30 kg

Condition: good (used), Year of construction: 1983, radial fan, dust extraction blower, fan, extraction, dust blower -Type: HL8-355/595-A -Motor power: 15 kW -Speed: 2900 rpm Hjdob A Siujpfx Acnet -Volume flow rate: 10,000 m³/h -Total pressure: 3500 Pa -Inlet connection: Ø 350 mm -Outlet connection: Ø 350 mm -Dimensions: 2000/1000/H1350 mm -Weight: 260 kg

Condition: good (used), Mounting plate, scribing plate, measuring plate, measuring table, leveling plate, scribing plate -Mounting plate: with support ribs, on a solid mobile base -Clamping table: 1500 x 500 x 150 mm Hjdpsqzl E Njfx Acnst -Table height: 1010 mm -Sheet thickness: 30 mm -Plate: with supporting ribs -Overall dimensions: 1530/710/H1010 mm -Weight: 320 kg

Condition: used, Year of construction: 2001, machine/vehicle number: 703796, Vierbruchfalzwerk Schwertfalzwerk / Mobil Knife Folding Unit Heidelberg VFZ-52.DFour-directional folding unit - Vierbruchfalzwerk Baujahr / Year 2001- Serial-No. 703796-297059 Hjdercnruopfx Acnet Format / Sheet Size min. 120 x 100mm Format / Sheet Size min. 520 x 360mm Geschwindigkeit / Speed 25 - 160 m/min Taktzahl / Cycle rate max. 30.000(T/h) Einlaufhöhe / Infeed height 51,5 – 91,5cm Schwertposition / Knife position 180° schwenkbar / 180° pivotable zum Anschluss an Maschinen mit DCT Steuerung / to connect on machines with DCT Control Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 2008, Equipment: ABS, LIEBHERR PELLE A316 Imported / Accident-FREE IN VERY GOOD CONDITION! ? YEAR OF PRODUCTION: 2008 ? BETRIEBSSTD. 18 887 Std Hedjum Ihyopfx Acnet TEL: * KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO * SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? * LASZLO - MAGYAR * COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ?????

Condition: new, Equipment: lighting, Take your painting process to a new level - with mobile convenience. Mobile paint booths in container design for painting and coating various objects. They are specially designed for mobility so that they can be easily transported and set up on different construction sites. The booth is usually equipped with a ventilation system to ensure air quality, lighting and a filter system that prevents paint mist from escaping. The ventilation system ensures that the vapors and particles released during painting are kept inside the booth so that there is no danger to the environment. Mobile paint booths are a practical and flexible solution for companies that need an effective painting system that can be moved from one construction site to another at any time. Overview of the design and functions Our mobile 20-foot Sapi painting containers consist of a robust steel frame with welded wall and ceiling panels. Inside, we can add special equipment such as cranes or lifting devices. The floor is made of tear plate. There are ventilation grilles in both door leaves, which are fitted with fine-pored filter mats. One leaf is designed as an escape door for safety reasons and has a viewing window. It should also be mentioned that these are not simply converted shipping containers! We manufacture all our containers from scratch ourselves. We only use the most stable materials that meet the requirements and have also been tested and proven in terms of safety. Normal shipping containers would not meet the required safety standards. Paint extraction system in the mobile painting container The paint mist extraction wall for paint mist separation is located in front of the rear wall and is equipped with multi-layer filter mats. The extraction wall consists of a galvanized housing, edged with baffle plates including various suspension and fastening elements for the filter equipment. The powerful and EX-protected extraction fan with drive motor is installed on a console in the rear wall area on the outside of the container. Next-generation mobile spray booths: meeting EU requirements and advancing coating solutions Hedpfx Asun Shgjcnjt The new generation of mobile spray booths must meet the highest EU requirements. The consideration of new paint systems such as hydro paints, polyurethane resins, epoxy-zinc dust or epoxy-iron-mica paints places high demands on existing paint booths. That is why we have developed a new and unique mobile paint booth for the next generation of coating solutions. An important criterion is the transportation of the workpieces for painting and for further processing steps. Do you need more information? Our engineers can offer expert advice and support. Whether paint mist dry separation or wet scrubbing, air humidification or air drying, condensation drying in a low-temperature process or hot air drying, whether pre-treatment of the workpieces by high-pressure washing with water flow in a circulation system or by compressed air blasting or wheel blasting technology.

Condition: new, Year of construction: 2025, DCV6000E Industrial Dust Collector The DCV6000E is an advanced industrial dust collector designed for the efficient extraction of wood chips, shavings, and dust from multiple workstations simultaneously. Engineered for continuous, heavy-duty operation in manufacturing environments, it delivers consistent suction performance and maintains excellent air quality throughout the production facility. Its reinforced construction and dynamically balanced impeller ensure quiet, reliable, and low-maintenance operation. Key Features Exceptional extraction capacity of 6,000 m³/h, ideal for operating multiple machines simultaneously Ø250 mm inlet port providing high airflow capacity and compatibility with centralized dust extraction systems 28 polyester filter cartridges with 5-micron filtration and a total filtration area of 14 m² Ceiling-mounted design for space-saving installation and easy system expansion Sealed waste bag replacement system for clean and convenient maintenance Energy-efficient operation thanks to an optimized fan blade design and a highly airtight extraction system Construction and Technology The DCV6000E is built with a heavy-duty hardened steel housing designed to withstand deformation and minimize vibration. At the core of the system is a dynamically balanced metal impeller, reducing noise while ensuring stable operation under high airflow conditions. The large-surface polyester filter cartridges effectively capture dust particles as small as 5 microns. An optional HEPA filtration system is available for applications requiring the highest air quality standards. Performance and Efficiency Hedpfsuc U Nbex Acnst Powered by a 3.8 kW (S1) motor operating at 3,000 rpm, the DCV6000E achieves an air intake velocity of 28–32 m/s. This enables efficient dust extraction for multi-machine woodworking lines and automated production systems, regardless of workload intensity. The unit is designed for continuous-duty operation, maintaining stable performance throughout extended production cycles. Applications The DCV6000E is ideally suited for furniture manufacturing plants, industrial woodworking facilities, CNC production lines, and other environments where large volumes of wood dust are generated. The unit is compatible with: Sliding table saws and panel saws Wide belt sanders Edge banders and planers CNC woodworking machines Standard Equipment 28 polyester filter cartridges (5-micron filtration) Galvanized steel housing Metal impeller and extraction chamber Sealed waste collection bags Optional Equipment HEPA filter Extraction hoses and system manifolds Waste container fill level sensors Technical Specifications Specification Value Motor Power (S1) 3.8 kW / 400 V, 50 Hz Motor Speed 3,000 rpm Airflow Capacity 6,000 m³/h Maximum Vacuum Pressure 3,000 Pa Noise Level 80 dB Inlet Diameter Ø250 mm Air Intake Velocity 28–32 m/s Total Filtration Area 14 m² Number of Filters 28 Filter Material Polyester, 5 microns, Filter Class "G" Overall Dimensions (L × W × H) 2000 × 625 × 2150 mm Weight 262 kg

Condition: new, Year of construction: 2026, DCV6500TC VIBER – Professional Industrial Dust Extraction System with Automatic Filter Cleaning and Heat Recovery The DCV6500TC VIBER is a modern industrial dust extraction system designed for intensive operation in woodworking and manufacturing facilities. It combines high performance, quiet operation, and energy-saving technologies. The unit is equipped with the VIBER system (automatic filter cleaning), TC technology (sound-insulated head housing), REHEAT system (heat recovery), and DAMAGE PROTECT (mechanical rotor protection). Main Advantages of the Machine Automatic VIBER filter cleaning system – effective filter cleaning without interrupting operation. REHEAT heat recovery system – recovers heat from exhaust air and improves thermal comfort. DAMAGE PROTECT system – protects key components against mechanical damage. Fully enclosed TC housing – reduces noise and vibrations during operation. High efficiency of 6500 m³/h – effective dust extraction from multiple workstations simultaneously. Large waste container capacity – 500 litres, reducing the frequency of emptying. Design and Technology The DCV6500TC VIBER has been designed for maximum reliability and long-term operation. The robust steel construction minimizes vibration transfer, while the dynamically balanced metal rotor ensures quiet operation and system stability. The specially designed fan blade geometry improves extraction efficiency while reducing energy consumption. The TC housing with acoustic insulation effectively lowers noise levels in the production area. Precision and Work Efficiency The filtration system, based on 32 polyester filters, captures particles down to 5 microns in size. For even higher filtration efficiency, optional HEPA filters can be installed. Quick-access waste containers and intuitive control via the electrical control cabinet improve operator comfort and increase overall productivity. Applications Hjdpfx Ajuc U N Uecnst The DCV6500TC VIBER is an industrial-grade central dust extraction system designed for cooperation with machines such as: sanding machines, panel saws, edge banders, milling machines. It is ideal for continuous operation in manufacturing plants where air quality and the reliability of the extraction system are essential. Standard Equipment VIBER system – automatic filter cleaning TC insulated housing for noise reduction REHEAT heat recovery system DAMAGE PROTECT mechanical rotor protection Control cabinet with main switch Mobile waste containers with viewing windows – 2 × 250 L Optional Equipment HEPA filters Ceiling-mounted extraction system Additional suction pipes and connectors Technical Specifications Parameter Value Motor power S1 5.5 kW / 400 V, 50 Hz Motor speed 2900 rpm Extraction capacity 6500 m³/h Negative pressure 3000 Pa Noise level 80 dB Suction port diameter 280 mm Air velocity 28–32 m/s Filtration area 16 m² Filter material Polyester, 5 microns / filter category "G" Number of filters 32 Waste container capacity 2 × 250 L Dimensions (L × W × H) 2440 × 930 × 2270 mm Weight 440 kg

Condition: new, Year of construction: 2026, SCV11300TC VIBER BIG-BAG – Advanced Industrial Dust Extraction System with Dual BIG-BAG Waste Collection The SCV11300TC VIBER BIG-BAG is a modern industrial dust extraction system designed for intensive operation in woodworking and manufacturing facilities. The unit stands out with its use of two high-capacity BIG-BAG collection bags, significantly improving waste management efficiency. Equipped with advanced filtration and protection systems, it provides effective extraction of sawdust, dust, and chips even during long-term continuous operation. Main Advantages of the Machine Two BIG-BAG collection bags – a unique market solution that increases waste storage capacity. VIBER system – automatic filter cleaning ensures constant extraction performance. TC housing – fully enclosed, sound-insulated construction reducing noise and vibrations. DAMAGE PROTECT system – mechanical protection preventing rotor damage caused by larger particles. REHEAT system – heat recovery from exhaust air, improving the energy efficiency of the facility. Design and Technology The SCV11300TC VIBER BIG-BAG is equipped with a reinforced 11 kW motor and a precisely balanced rotor, ensuring stable, reliable operation and high extraction performance of 11,300 m³/h. The housing has been designed for effective acoustic insulation and maximum suction system tightness, resulting in cleaner and warmer air in the workplace. Precision and Work Efficiency Thanks to 64 polyester filters with filtration efficiency down to 5 microns, and the possibility of installing an additional HEPA filter, the unit provides safe and highly effective air purification. The high suction speed (28–32 m/s) enables efficient removal of chips and sawdust from multiple workstations simultaneously. Applications The SCV11300TC VIBER BIG-BAG is an ideal solution for: woodworking plants, furniture factories, operators of panel saws, edge banders, and sanding machines, industrial installations requiring a central dust extraction system. Standard Equipment VIBER system – automatic filter cleaning Two BIG-BAG collection bags Control cabinet with operator panel TC housing with acoustic insulation DAMAGE PROTECT protection system Optional Equipment HEPA filter for extremely fine particles BIG-BAG filling level sensors Automatic fan reverse system Technical Specifications Parameter Value Power supply voltage 400 V Motor power 11 kW Motor speed 3000 rpm Filter type Polyester, 5 microns / filter category "G" Filter dimensions Ø160 × 960 mm Hsdoudav Njpfx Acnst Number of filters 64 pcs Filtration area 30 m² Inlet diameter 350 mm Outlet diameter 500 mm Extraction capacity 11,300 m³/h Negative pressure 3000 Pa Air velocity 40 m/s Noise level 80 dB Number of BIG-BAGs 2 pcs BIG-BAG capacity 1250 L each / 2500 L total Dimensions (L × W × H) 3250 × 1100 × 3700 mm Weight 820 kg

Condition: used, Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan -Dust extraction fan: radial fan -Motor: Loher 7.5 kW 1445 rpm -Volume flow: m³/h -Number: 2x fan available -Price per piece -Dimensions: 895/895/H865mm Hjdpfxot Hy Ufo Acnst -Weight: 171 kg/pc.

Condition: good (used), Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan -Dust extraction fan: radial fan Hodpot Hy Ulefx Acnst -Motor: Dietz 3.0 kW 1420 rpm -Fan wheel: Ø 600 x 240 mm -Volume flow: m³/h -Dimensions:790/700/H790mm -Weight: 97 kg

Condition: used, Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan -Dust extraction fan: Radial fan type DG 63 b Hsdpfxst Rbhzj Acnet -Motor: Dietz 0.125 kW 2845 rpm -Volume flow: 6 m³/min / 360 m³/h -Connection: inlet Ø 58 mm -Connection: output Ø 75 mm -Dimensions: 380/250/H360 mm -Weight: 9.2 kg

Condition: good (used), Year of construction: 1993, Offer 24299 Technical data: - Volume flow approx. 2170 m³/h. - Dust bag / chip bag up to 170 L Hsdjt Hurxjpfx Acnst - Connection spigot 160 mm - Connection spigot adapter 2 x 100 mm - Drive power 400 V / 2.2 kW - Space requirement W 1200 x H 1900 x D 550 mm - Weight approx. 85 kg