Used Mobile Dust Extraction for sale (13,218)

Condition: used, Year of construction: 1998, Suction nozzle diameter: 160 mm Nominal volumetric flow: 2050 m³/h Volumetric flow monitoring: differential pressure indicator Filter area: Filter cleaning: motorized Motor power: 3 kW Machine length: Machine width: Gkjdpfx Ajzqyycjkyec Machine height: Weight: 250 kg

Condition: used, Year of construction: 2026, New demonstration machine! List price €21,690 net. High-performance dust extraction unit for extracting dust from machining centers, suitable for installation in the work area outside of potentially explosive zones. Key design features: - Galvanized steel sheet construction - Space-saving due to its compact design - Delivered in operational condition - ATEX - Impact resistance tested (FSA) - Low energy consumption with high performance thanks to a high-performance fan arranged on the clean air side with a special impeller - Energy-saving motor of efficiency class IE3 - 3 large-volume collection containers with liner bags - Collection volume 495 liters - High operational safety and long service life thanks to BGIA-tested filter hoses - Compressed air pulse cleaning ("Jet" cleaning) with time-dependent control for regenerating the filter surface - Alpha control with automatic start function (slide valve control available at extra cost) - Connection cable, 5 m long, with plug - Automatic fire suppression system with special extinguishing agent container (no connection to the water supply required) - The extinguishing agent, ABC powder, is not suitable for fires involving metals as well as cooking fats and oils - Check valve, type-tested - Design according to DIN EN 16770 - Residual dust content in the exhaust air below 0.1 mg/m3 - Passed GS-HO-14 "GS - H3" test - A T T E N T I O N ! - The compressed air pipe from the compressed air tank, a pressure regulator, a maintenance unit, a filter and a water separator are not included in the scope of delivery. These parts must be connected on-site. - The pressure regulator must be mounted directly in front of the compressed air tank in the supply line. The compressed air must be absolutely dry, dust-free and oil-free. - N O T I C E ! - Uniform filling of the collection containers cannot be guaranteed due to process-related reasons. Suction nozzle arrangement: Left Nominal volume flow *) : 3535 m3/h Maximum volume flow: 5500 m3/h Negative pressure at the interface *): - At nominal volume flow: 2950 Pa - At maximum volume flow: 2200 Pa Filter area: 20.5 m2 Gkodpfezxtz Nex Akysc Suction nozzle: 250 mm Nozzle height, approx.: 968 mm, center Motor - Fan: 5.50 kW, 3x400 V, 50 Hz Fuse: 32 A (on-site) Compressed air connection: 1/2 " (on-site) Operating pressure: 4.5 bar Compressed air consumption: approx. 45 Nl, per compressed air pulse with an impulse time of: 60 ms Sound pressure level: 73.0 dB(A) Weight, approx.: 760 kg Dimensions, L x W x H: 2750 x 1030 x 2500 mm *) Mandatory information according to GS-HO-07 at 20 m/s and with the filter hoses under load (beech test dust). In the delivery condition and under practical conditions with coarser dust, the suction power is significantly higher. Scope of delivery: - Filter hoses, externally pressurized, permeability < 0.5 % (BGIA) - Energy-saving motor of efficiency class IE3 - 3 large-volume mobile collection containers - Mitsubishi-Alpha control with automatic start function (6 I-coils can be connected) and runtime addition - Input for external shutdown signal (limit switch, etc.) - Jet cleaning with time-dependent control - Type-tested check valve - Automatic fire suppression system (with special extinguishing agent) "GS-wood dust tested - H 3" Optional equipment: Control on the operator side IE5 efficiency power pack Up to 25% efficiency advantage with the optional IE5 efficiency power pack. Vacumobile with IE5 synchronous motors reduces your electricity consumption an

Condition: used, Year of construction: 2022, Suction nozzle diameter: 350 mm Volume flow: 6927 m³/h Volume flow monitoring: pressure difference indicator Negative pressure: 2543 Pa Filter area: m² Residual dust content: less than 0.2 mg/m³ Sound pressure level: 65 dB Filter cleaning: pneumatic, jet cleaning Godpfxoz A D U Ej Akyokc Motor power: 11 kW Frequency inverter: yes Machine length: Machine width: Machine height: Weight:

Condition: like new (used), Manufacturer: DEPUR SYSTEM Motor power: 1.1 kW Flow rate: 1400 m³/h Gksdpfx Akez Nhpzeysc

Condition: new, Year of construction: 2025, Suction nozzle diameter: 160mm Maximum volume flow: 2000 m³/h Nominal volume flow: 1448 m³/h Gedev Drqwopfx Akyokc Volume flow monitoring: pressure difference display Negative pressure: 3000 pa Filter area: 10.5 m² Residual dust content: less than 0.1 mg/m³ Sound pressure level: 64 db Chip bag volume: 160 l Filter cleaning: pneumatic Motor power: 3 kW Machine length: 1800 mm Machine width: 820 mm Machine height: 2220 mm Weight: 320 kg

Condition: used, Year of construction: 2000, machine/vehicle number: 48457-16, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, Mobile Höcker Polytechnik dust extraction unit for extracting wood chips and dry dust from woodworking machinery. The unit is equipped with a large filter bag, an 180-liter collection bag, and swivel casters for easy movement around the workshop. Technical specifications: Manufacturer: Höcker Polytechnik GmbH Type / group: Gr. 3 Motor power: 2.2 kW Power supply: 230/400 V, 50 Hz Motor speed: 2,800 rpm Airflow capacity: 2,460 m³/h Extraction connection diameter: 160 mm Filter area: 3 m² Collection capacity: 180 liters Year of manufacture: 2000 Article number: 90303 Internal reference number: 48457-16 Condition: used, with normal signs of wear and tear and previous operation. The actual condition and scope of delivery are shown in the photographs. Godpfez Dv T Asx Akyskc The machine can be inspected by prior appointment. Location: Gātciems, Latvia. We can assist with loading and arrange transportation within Latvia or to other European countries.

Condition: excellent (used), Walther NOVA 2000 extraction and dust collection unit with 2 extraction arms mobile, on castors Gkjdpfx Akoivta Noysc 2 units available In very good, ready-to-use condition!!!

Condition: used, Year of construction: 2017, power: 11 kW (14.96 HP), input voltage: 400 V, volume flow: 6,927 m³/h, overall weight: 1,080 kg, Equipment: CE marking, We are offering this used Höcker Polytechnik Vacumobil 350 mobile dust extraction system, model Vacumobil JT350-L, manufactured in 2017. If you have any questions or require further information, please do not hesitate to send us a message or call us. Gsdpfxeznulzo Akyekc

Condition: excellent (used), Year of construction: 1999, CHAIN FILTER Maximum filter capacity : 30.000 m3/h ATEX Approved 4 x Dust extraction Fans, 15 Kw each. ( All 4 frequenz controlled ) Filter measures : L 6700 x W 2400 x H 4200 mm ( Without legs : H 3300 mm, will fit on a low truck in 1 section ) Cross air unit included Gjdpsz R Eh Dsfx Akyjkc Filter + fans has always been located inside, so the condition is very good.

Year of construction: 1986, condition: good (used), Radial fan, high-pressure radial fan, dust extraction blower, exhaust gas extraction, welding fume extraction, extraction, extraction blower, fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower -Manufacturer: Rippert, radial fan, extraction blower -Type: HL-450- Cex -Volume flow rate: 12500 m³/h -Total pressure: 2100 Pa -Motor: Schorch 11 kW 1450 rpm -Inlet connection: Ø 450 mm Gkedpfx Asz Im U Eokyec -Output connection: 635 x 510 mm -Fan wheel: Ø 770 x 160 mm -Protection class: IP 44 -Dimensions: 1530/1360/H1290 mm -Weight: 578 kg

Year of construction: 1985, condition: good (used), Radial fan, high-pressure radial fan, dust extraction blower, exhaust gas extraction, welding fume extraction, extraction, extraction blower, fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower -Manufacturer: Rippert, radial fan, extraction blower -Type: HL8-300- -Volume flow rate: 50000 m³/h -Total pressure: 2600 Pa Gsdpfxoz Im I Ee Akyjkc -Motor: Schorch 55 kW 1470 rpm -Inlet connection: Ø 800 mm -Outlet connection: Ø 800 mm -Fan wheel: Ø 1340 x 300 mm -Protection class: IP 54 -Dimensions: 3140/1500/H2480 mm -Weight: 1770 kg

Year of construction: 1985, condition: good (used), Radial fan, high-pressure radial fan, dust extraction blower, exhaust gas extraction, welding fume extraction, extraction, extraction blower, fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower -Manufacturer: Rippert, radial fan, extraction blower -Type: S8-710/2-A -Volume flow: 32000 m³/h -Total pressure: 3200 Pa -Motor: Schorch 55 kW 1470 rpm -Inlet connection: Ø 700 mm -Outlet connection: Ø 800 mm -Fan wheel: Ø 1200 x 230 mm Gksdpoz Im R Hjfx Akyoc -Protection class: IP 54 -Dimensions: 2900/1400/H2170 mm -Weight: 1470 kg

Condition: good (used), Radial fan, dust extraction blower, fan, extraction, dust blower, blower, exhaust fan -Dust extraction fan: Radial fan EX protected -Motor: AEG 7.5 kW 2935 rpm -Connection: Inlet Ø 160 mm -Connection: Output Ø 140 mm -Fan wheel: Ø 700 x 50 mm -Volume flow rate: m³/h -Dimensions: 890/760/H960 mm Gksdpfx Akoz Hvicjyec -Weight: 180 kg

Condition: like new (used), functionality: fully functional, type of input current: DC, actuation type: electric, The Höcker Polytechnik industrial dust extraction system is designed for removing wood dust. It features a steel structure with ventilation ducts and large fans. The unit is used, in good working order, and ideal for woodworking and panel processing plants. Technical specifications: Manufacturer: Höcker Polytechnik Type: industrial dust extraction system Application: carpentry workshops, sawmills, wood processing plants Pre-separator: cyclone Gksdpfjz Hlb Ijx Akysc Filter: industrial Höcker Polytechnik filter Drive: electric motors Motor power: 2 x 15 kW Control box: YES Ducts: galvanized steel Material collection: hoppers / sawdust and dust collection system Installation: stationary, industrial installation (for an additional fee, including transport and installation at the customer's location). CONTROL BOX Condition: used, complete system Financing options are available for the machine through leasing or installment plans. The machine has been technically inspected and is ready for further operation. It is possible to start and test the unit on-site, allowing you to assess its condition and operating parameters before purchase. For customer convenience, we offer financing options in the form of leasing or installments. We assist with the necessary formalities and the selection of the most advantageous financing option. WE ORGANIZE TRANSPORT WHERE CAN YOU SEE OUR MACHINES? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE jbsmaszyny.pl

Condition: used, power: 2.2 kW (2.99 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, type of input current: three-phase, volume flow: 1,850 m³/h, intake manifold diameter: 160 mm, filter area: 8.25 m², total height: 1,950 mm, total length: 1,700 mm, total width: 800 mm, overall weight: 200 kg, Equipment: CE marking, No. 3273 Extraction unit / dust extractor AL-KO Mobil-Jet 160 Used Gkodpsz Ibgijfx Akyjc Dust extractor for extracting wood dust and chips Motor power 2.2 kW Nominal air flow rate 1850 m3/h Minimum air flow rate 1448 m3/h Extraction inlet Ø 160 mm Negative pressure 2120 Pa Filter area 8.25 m2 Air filter category G Pneumatic filter cleaning AL-KO OPTI JET Compressed air connection 8.5 bar Chip collection container approx. 320 l Base frame without wheels Suitable for wood dust separation, residual dust content class 2 (H2), max. residual dust content 0.2 mg/m3 Type 1 (B1), suitable for extracting combustible dust in Zone 11 BG-tested, GS-tested CE marking Suitable for indoor use Electrical connection 400 V / 50 Hz, three-phase Ready to plug in, including power cable and 16 A plug Transport dimensions approx. 1700 x 800 x 1950 mm LWH Weight approx. 200 kg Sale on behalf of customer, ex location near 73430 Aalen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex location

Condition: good (used), functionality: fully functional, Year of construction: 2017, mobile Air filter extraction box Box with built-in fan and filter cartridge. With HEPA filter. for ventilation, room air filtration and extraction. Gkjdjvvcqxjpfx Akyjc extraction capacity ca 1800m3/h extraction fan: IMOFA DS 11-4 460watt 50 Hz 4.8 Amp voltage: 230v 50Hz Systemair RTRE 5 transformer controller 4 pcs filter cartridges 1 pc ULTIMA RP Hepa filter 3000m3/h Aluminum frame housing, mobile brakeable wheels dimensions: 100x100x80 cm weight: ca 120kg

Year of construction: 1988, condition: good (used), Radial fan, high-pressure radial fan, dust extraction blower, exhaust gas extraction, welding fume extraction, extraction, extraction blower, fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower -Manufacturer: Norfab, radial fan, extraction blower -Type: E 450 L 65 -Motor: Schorch 18.5 kW 2935 rpm -Volume flow rate: 16000 m³/h -Total pressure: 3000 Pa -Inlet connection: Ø 450 mm Gkjdpfx Ajz Hvv Aekyoc -Outlet connection: Ø 500 mm -Fan wheel: Ø 640 x 290 mm -Protection class: IP 54 -Dimensions: 1500/1150/H1270 mm -Weight: 478 kg

Condition: excellent (used), filter area: 50 m², suction capacity: 650 m³/h, negative pressure: 38,000 Pa, High-pressure fume extractor, dust extractor, TEKA self-cleaning filter. Filter for plasma, laser. Due to its design, the system is particularly recommended for processing greasy, sticky fumes and dust. The device is equipped with an automatic system for impregnating cartridge filters and an activated carbon filter for neutralizing odors generated during processing. The filter is cleaned pneumatically with impulses of compressed air during operation, which results in high efficiency of the device. The extraction is designed for special applications where the filtered fumes and dusts may be soggy and sticky. By feeding the impregnant, moisture is captured from the smoke, which helps protect the filters from sticking. In this case, the life of the patron filters is extended. After the cleaning process, the control gives a pulse to the magnetic valve, located on the top cover of the powder-filled barrel. The applied magnetic pulse swirls the impregnant, which enters the suction pipeline. The powder covers the working surface and provides a protective coating for the filters. Unit like new - worked only 126 hours !!! Gsdpjrhidmsfx Akyskc Turbine with a power of 7.5 Kw. in a sound-absorbing housing with a silencer Capacity 650 m3/h at a vacuum of up to 38 000 Pa !!! Filtration area of 50m2 Inlet diameter : 100 mm Complete with , pneumatic gate valve , silencer and partial piping.

Condition: used, Year of construction: 2008, 12 motors of 15kW Disassembled into 6 parts: Part 1: 2x Upper part with motors 4000kg Part 2: 2x Intermediate part with filter bags 4000kg Part 3: 2x Lower part with legs 2000kg Remainder: Return lines and 1x switch cabinet. Dismantling takes place on Extraction is loaded onto the truck. - Year: 2008 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 8011510B - Suitable for material: Wood dust - Type of extraction: Underpressure installation - Capacity [m³/h]: 80000 - Nominal airflow [m/s]: 22 - Negative pressure [Pa]: 3200 - Main fan [pcs]: 12 - Main fan power [kW]: 15.0 - Number of filter bags [pcs]: 384 Gkedpfx Akowiwpzjysc - Filter length [mm]: 2500 - Filter diameter [mm]: 230 - Filter surface area [m²]: 694 - Options: Fire suppression system, Control cabinet Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2021, overall weight: 200 kg, input voltage: 400 V, total width: 800 mm, total length: 1,350 mm, total height: 1,500 mm, volume flow: 216 m³/h, space requirement height: 1,500 mm, space requirement width: 800 mm, space requirement length: 1,350 mm, filter area: 2 m², negative pressure: 31,500 Pa, power: 3 kW (4.08 HP), transport height: 1,500 mm, transport length: 1,350 mm, transport width: 800 mm, tank capacity: 80 l, No. 04520 Mobile extraction unit / mobile dust extractor ESTA WHISPERSOG 3.0 FM Unused, year of construction 2021, in new condition Industrial vacuum cleaner for cleaning work and machine extraction The WHISPERSOG high vacuum cleaners work more quietly than conventional industrial vacuum cleaners with the same performance. They are designed for continuous operation and can be used not only as industrial vacuum cleaners, but also as mobile dust extractors for direct extraction on machines. By using permanent filter cartridges, operating costs can be significantly reduced compared to disposable filters. The dust produced can be easily disposed of using the patented tipping device. Areas of application: Removal of coarse, fine and free-flowing dust during cleaning work / Direct extraction of machines in continuous operation Motor power 3 kW Electrical connection 400 V Maximum negative pressure 31500 Pa Gedpfx Ajylb Ixokyekc Maximum air volume flow 216 m3/h Extraction nozzle diameter 50 mm Filter surface 2m2 Dust collection container 80 liters Potential-free contact for automatic activation when machine is started Including electrical connection cable with 16 A plug, 10 waste bags and technical documentation Transport dimensions approx. 1350 x 800 x 1500 mm LWH Weight approx. 200 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: like new (used), EXHIBITION MACHINE For sale is a like-new JET Cyclone dust extraction system JCDC-2 with a suction volume of 2,159 m³/h. The exhibition machine is in its original condition, therefore you receive the full warranty. Gjdpfoz Hc H Iox Akyekc Technical data: - Motor 230 V / 1.5 kW - Motor speed 2,800 rpm - Suction volume 2,159 m³/h - Hose connection diameter 152 mm - Hose diameter 2 x 100 mm - Filter efficiency 99% at 2 micrometers - Drum volume 113.6 l - Size of the drum collection bag (D x L) 780 x 830 mm - Size of the container collection bag (D x L) 500 x 600 mm - Noise level approx. 76 dB (LpA) - Timer setting remote control 2, 4, 6, 8 hours - Dimensions (L x W x H) 658 x 1,286 x 1,835 mm - Weight approx. 94 kg (107 kg gross) The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Freight shipping: Austria: € 60.00 incl. VAT Germany: € 80.00 incl. VAT South Tyrol: € 120.00 incl. VAT Related terms: JET, dust extraction system, cyclone dust extraction system, cyclone extraction, cyclone separator, dust extraction system, dust extraction unit, chip extraction, chip extraction system, wood extraction, wood chip extraction, workshop extraction, workshop dust extraction system, dust extraction, dust extraction system.

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, total height: 2,000 mm, total length: 2,540 mm, total width: 900 mm, overall weight: 750 kg, Equipment: CE marking, documentation/manual, Type A according to DIN EN 16770:2018, without fire extinguishing system, tested according to the testing principles GS-HM-03 of the BGHM. The dust extractor is a mobile suction and filter unit for commercial use, designed to be placed in the work area. The dust extractor is suitable for collecting, conveying, and separating dry wood, paper, or plastic shavings and dust from various machining machines. Consisting of a vacuum-resistant housing with a suction nozzle and check valve, antistatic and water- and oil-repellent filter elements with jet-pulse cleaning, a high-performance radial fan arranged on the clean air side with a three-phase motor of energy efficiency class IE3, as well as integrated exhaust noise reduction and air outlet grille. Equipped with 2 swivel and 2 fixed casters, 2 chip collection containers with filling bags, and a control unit with a 5 m connection cable and CEE plug. The control unit is designed for automatic operation. The automatic start control for a maximum of 6 machines and the automatic filter cleaning with runtime addition are included. For the automatic start, either take-off coils or potential-free contacts of the machine can be used. 1K PVC single-layer coating in RAL 9006 (white aluminum). Delivered in a fully assembled, ready-to-use condition. For cleaning, compressed air prepared on-site must be provided at the device. (Connection via a quick-connect nipple, NW 7 / 6 bar). Technical data: Suction nozzle: Ø 250 mm (flange) Residual dust content: < 0.1 mg/m³ H3 Filter area: 21 m² Cleaning: offline - compressed air jet-pulse Compressed air supply: 6 bar (connection via quick-connect nipple NW 7) Volume flow: 4,500 m³/h Gjdpjz R Dd Defx Akyokc Rated volume flow: (at 20 m/s in the suction nozzle): 3,530 m³/h Vacuum (at the suction nozzle at rated volume flow): 2,700 Pa Sound pressure level MAX (distance to the device 1 m): 67 dB (A) Fan motor: 5.5 kW, 230/400 V, 50 Hz, 3,000 min -1, IP 54 Operating mode: continuous operation, intermittent Collection volume of filling container: 2 x 165 liters Dimensions (L x W x H): 2,130 (2,540) x 900 x 1,962 mm Weight: approx. 705 kg

Condition: new, Year of construction: 2026, DCV4500 VIBER – Modern Industrial Dust Extraction System with Automatic Filter Cleaning The DCV4500 VIBER is a modern industrial dust extraction system designed for continuous, efficient, and quiet operation in demanding woodworking environments. The unit ensures stable extraction performance throughout the entire operating cycle, minimizing the risk of efficiency losses and production downtime. Main Advantages of the Machine VIBER system – automatic filter cleaning without interrupting operation. Full upper enclosure – significantly reduces noise and vibrations. Extraction capacity of 4500 m³/h – ensures effective dust removal even with several machines operating simultaneously. Highly sealed system design – prevents heat losses and guarantees clean air in the production hall. New safety protection system – improves operational reliability. Metal rotor – dynamically balanced for quiet and vibration-free operation. Design and Technology The machine is based on a reinforced, hardened steel construction. Its compact dimensions allow the extractor to be installed close to a wall or between machines without limiting the available working space. Metal waste containers equipped with viewing windows and a mobile system enable quick emptying and easy monitoring of filling levels. Service doors provide convenient maintenance access and simplify the replacement of filter bags. Precision and Work Efficiency The dust extraction fan used in the DCV4500 VIBER provides an air suction speed of 28–32 m/s. Thanks to the specially designed rotor blade geometry, maximum efficiency is achieved with minimal energy consumption. At the same time, filtration down to 5 microns effectively captures fine dust particles, improving workplace air quality and enhancing the final quality of processed materials. Applications The DCV4500 VIBER is an advanced central dust extraction system ideal for: woodworking plants, furniture manufacturers, producers of wooden components. It efficiently supports machines such as sanding machines, panel saws, edge banders, and other equipment generating large amounts of dust and chips. Its reliable operation makes it suitable for both serial production and intensive industrial use. Standard Equipment Control cabinet with ON/OFF function 18 polyester filters with filtration efficiency down to 5 microns Metal waste containers with viewing windows Full sound-insulated enclosure Technical Specifications Parameter Value Motor power (S1) 3.0 kW Power supply 400 V / 50 Hz Motor speed 3000 rpm Extraction capacity 4500 m³/h Negative pressure 3000 Pa Noise level 80 dB Suction port diameter 200 mm Air velocity 28–32 m/s Filtration area 6 m² Number of filters 18 Filter material Polyester, 5 microns / filter category "G" Gksdpfeuc Unqex Akysc Dimensions 752 × 1502 × 2200 mm Weight 220 kg

Condition: used, Year of construction: 2011, Mobile dust extraction system, Schuko connection, diameter 160 mm Dimensions L/W/H in mm: 2045x870x2125 Gedpfezmag Iox Akyskc Power: 2.2 kW

Condition: new, Year of construction: 2025, Suction nozzle diameter: 300mm maximum volume flow: 6000 m³/h nominal volume flow: 5089 m³/h volume flow monitoring: pressure difference display Gkodpfxepfat No Akyec Filter area: 31.8 m² Residual dust content: less than 0.1 mg/m³ Sound pressure level: 70 db Shrew bag volume: 480 l Filter cleaning: mororic Engine power: 7,5 kW Extinguishing device: yes Machine length: 3245 mm machine width: 1030 mm Machine height: 2595 mm Weight: 780 kg