Used Milling Machine for sale (83,558)

Condition: refurbished (used), Year of construction: 1999, travel distance X-axis: 11,450 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,250 mm, Technical description Value Unit Travel distance X-axis: 11,450 mm Y-axis: 3,500 mm Z-axis: 1,250 mm Cross-section of the Z-axis slider: 360 x 360 mm Portal aperture: 3,000 mm Height under vertical spindle: 1,400 mm Working clamping width: 2,500 mm Milling unit: Type FA 305 C Power: 30 kW Max. torque: 1,070 Nm Max. speed: 4,000 rpm Cross section of the pusher: 360 x 360 mm Vertical head with spindle Power: 30 kW Max. speed: 4,000 rpm Fpjdpfx Ajtix S Nsfnjb Max. torque: 1,070 Nm Rapid traverse in X, Z: 25,000 mm/min Rapid traverse in Y: 20,000 mm/min Work feed infinitely variable in X, Y and Z: 10,000 mm/min Compressive force of each axis: 25,000 N Tool holder: SK 50 Horizontal angle head with 144 x 2.5° pitch, with SK50 spindle Available power: 30 kW Max. speed: 4,000 rpm Max. torque: 1,070 Nm Positioning increment: 2.5 degrees Longitudinal pallet system 1 pallet shuttle with 2 storage stations 1 manual pallet transfer system between machine and shuttle 2 workpiece holder pallets: 5,000 x 2,500 mm Tool changer Chain magazine: 80 positions Distance between the positions on the chain: 130 mm Diameter of consecutive tools: 125 mm Tool diameter max.: 200 mm Maximum tool length: 400 mm Tool weight max.: 25 kg Tool change time, tool to tool: 8 sec Tool change time, chip to chip: 38 sec Equipment: Cooling devices: - Cooling via orientable nozzles - IKZ / cooling through the center of the spindle, 3,000 l tank, capacity: 30 l/min, pressure: 7 bar at the mold 2 chip conveyors: 1 Portal cladding Measuring probe, make: RENISHAW, type: MP14 Electronic handwheel Remote diagnosis Tool management and wear management Documentation in 2 copies: German / French CE marking Very well maintained, continuously serviced condition!

Condition: ready for operation (used), Year of construction: 1997, CNC milling machine Deckel Maho DMU 50 T Control: Heidenhain TNC426 Spindle speed: 20-9000 rpm Feed rate X, Y, Z: 20-10000 mm/min Rapid traverse X, Y, Z: 12000 mm/min Working area X 500mm, Y 400mm, Z 400mm Tool holder: SK40 DIN 69871 Drawbar DIN 69872 Tool changer: 16 positions Max. tool projection length from spindle nose: 290mm Worktable: Manually rotatable and tiltable rotary table Dimensions: 700 x 500mm T-slots M14 Centering bore: 30mm Transport data: Weight: 3200kg Dimensions (length x width x height): 2.10 x 2.30 x 2.30m Fpjdpfx Afox Taq Njnjb

Condition: excellent (used), Year of construction: 1999, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 610 mm, spindle speed (max.): 10,000 rpm, total height: 2,700 mm, total width: 1,700 mm, total length: 2,000 mm, power: 0.01 kW (0.01 HP), CNC-Drilling and Milling machine, Control Heidenhain TNC 426, only 8500 h table size 380x920 mm, travel X/Y/Z/W - 500/350/610 mm, max. table load 250 kg, spindle speed stepless 50-10'000 rpm., spindle performance 10,2 kw, drilling capacity Ø 25 mm, tapping capacity M20, taper SK 30, tool changer 24 places, elektronic handwheel, central lubrication, oil mist filter, coolant refigitor, preparation for spindle coolant + Renishaw, lot of tools and holders, manual Fpodstvmtkspfx Afnsb

Condition: excellent (used), For sale: a robust horizontal milling machine from the renowned manufacturer VEB Heckert Auerbach (GDR), model FW 250x1000. The machine is in very good condition, complete, fully operational, and ready for immediate use. ✔ Technical specifications: • Model: FW 250x1000 • Year of manufacture: 1979 • Manufacturer: VEB Werkzeugmaschinenfabrik Auerbach, Fritz Heckert Combine • Weight: approx. 1,700 kg • Worktable: 250 × 1000 mm, T-slots • Spindle speed range: 630 – 1,800 rpm • Power supply: 3x380 V / 50 Hz • Motor power: 5.8 kW • Control voltage: 220 V • Rated current: 16 A, fuse protection: 25 A • Mechanical and automatic feeds in axes ✔ Equipment included: • Heavy-duty machine vice on the table • Work light • Coolant system Fpsdpfx Afew Uab Nensb • Complete control panel with setting wheels and feed controls ✔ Advantages: • Very stable, heavy-duty design (1.7 t) – ideal for precise and repeatable machining • Renowned manufacturer – Heckert (GDR), known for indestructible machines • Functional and complete – ready to work immediately • 1000 mm table – enables machining of larger components This is a reliable machine, not a cheap, lightweight Chinese construction – just classic engineering from an era when equipment was built to last.

Condition: excellent (used), Year of construction: 1998, operating hours: 17,260 h, Table size: 1000 x 500 mm Tool holder: ISO 40 Travel paths: X-axis: 800 mm Y-axis: 500 mm Z-axis: 420 mm Distance between horizontal spindle axis and table: 210 – 630 mm Distance between vertical spindle nose and table: 130 – 550 mm Table load capacity: max. 500 kg Speed range: 50 - 4000 rpm Feed rate (infinitely variable): 5 - 2000 mm/min Rapid traverse in all axes: 8 m/min Vertical milling head, swiveling: ± 90° Manual quill stroke adjustment: 100 mm Drive power: 7.5 kW Dimensions (L x W x H): approx. 3000 x 2400 x 1975 mm Weight: approx. 3000 kg Accessories / Special features: • CNC contouring control HEIDENHAIN TNC 410 • Electronic handwheel HEIDENHAIN HR 410 • SIEMENS AC servo drives • Data interface V 24 / RS 232 • Swiveling vertical milling head ± 90° right & left with 100 mm quill adjustment • Hydraulic tool clamping, vertical & horizontal, ISO 40 • Swivel-away device for the vertical milling head Fpjdpfx Aoxtu H Njfnob • Very wide speed range up to 4,000 rpm • Vibration-free operation thanks to rigid and heavily ribbed cast iron guideways • Ball screws for X, Y, and Z axes • All electrical control elements on one side, in a movable control panel • Fixed angle table with foldable chip guard • Coolant system integrated in the machine base • Hydraulic unit • Central lubrication • CE compliant Operating hours: 17,256 Spindle hours: 3,816 Image: shows brochure photo Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: excellent (used), shipping EU ~300euro Fpedpfx Afel Skk Uenjb

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 900 mm, Travel distances: X-axis (longitudinal) 3200 mm Y-axis (transverse) 2100 mm Z-axis (vertical) 900 mm Working area: Table clamping surface 3000 x 1700 mm Spindle nose to table 66 – 966 mm Table load capacity 11000 kg 5-axis fork head: Tool holder HSK 63 A C-axis (4th axis) +/- 360° B-axis (5th axis) +100° / -110° Main drive: Drive type Motor spindle Drive power 63 kW Fodex H Srlopfx Afnopb Spindle speed: Spindle speed 18000 rpm Torque 106 Nm Max. rapid traverse: X and Y axes 15000 mm/min Machine weight: 37700 kg Accessories: HURCO CNC Machining Center DCX 32-5 Si (ATC 60) with MAX5 control - AXS control with detachable electronic handwheel - Pentium technology, SSD (Solid-State Drive), 2 GB RAM, Ethernet interface, USB interface, built-in self-diagnosis system, WINDOWS platform - Rigid tapping (tapping without compensation chuck) - 60-position tool changer - 5-axis fork head - Motor spindle - Spindle cooler - Chip conveyor 5-axis simultaneous machining, enabling simultaneous movement of 4 or 5 axes in NC operation.

Condition: ready for operation (used), Year of construction: 1997, CNC milling machine Deckel Maho DMU 80 T Control: Heidenhain TNC426 Spindle speed: 20-6300 rpm Feed rate X, Y, Z: 20-10000 mm/min Rapid traverse X, Y, Z: 15000 mm/min Work envelope: X: 800 mm, Y: 650 mm, Z: 550 mm Tool holder: SK40 DIN 2079 Draw bolt DIN 69 872 Fpodpfx Ajx Tapfsfnob Tool changer: 25 positions Max tool diameter: 160 mm Max tool extension from spindle nose: 315 mm Work table: Dimensions: 1100x600 mm T-slots: 9 x M14 Permissible workpiece weight: 500 kg Transport data: Weight: 5800 kg Dimensions (L x W x H): 3.05 x 2.40 x 2.45 m

Condition: excellent (used), Year of construction: 2006, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 1 rpm, quill stroke: 60 mm, total height: 2,000 mm, total width: 2,000 mm, total length: 2,000 mm, table width: 425 mm, table length: 800 mm, overall weight: 2,000 kg, workpiece weight (max.): 250 kg, Travel X/Y/Z 600/400/400 mm, spindle speed 1 - 4500 rpm, motor 7,5 KW, spindle ISO 40, control Heidenhain TNC 124 or manual, table size 800x425 mm, hydraulic tool clamping, tilting head, coolant device, electric handwheel, tool holders, manual Fjdsw Ay N Dspfx Afnepb

Condition: ready for operation (used), functionality: fully functional, feed length X-axis: 900 mm, feed length Y-axis: 345 mm, Lagun turret milling machine FTV4 with automatic tool clamping, head with variable speeds, table size 1370x280 mm, travels: longitudinal 900 mm, cross 345 mm, vertical 400 mm, ram travel 570 mm, quill travel 100 mm, ISO 40 taper, automatic and rapid table feeds, head speed 50-2800 rpm, head power 3 hp, equipped with slotting head, digital readout, new mechanical vise, machine in good condition. Fpjdox S Rr Uopfx Afneb

Year of construction: 1972, condition: ready for operation (used), Spindle-to-table distance min./max.: 81mm/481mm, counter support spindle center distance: 195mm, spindle head swivel: 360°, milling spindle diameter: 70mm, spindle adjustment: 100mm, headstock adjustment: 300mm, table dimensions X/Y: 480mm/820mm, travel X/Y/Z: 500mm/200mm/400mm, max. workpiece length: 400mm, spindle speed: 1600rpm, feed X/Y: 500mm/min, feed Z: 250mm/min, spindle head swivel: +/-30°, machine dimensions X/Y/Z: approx. 1600mm/2550mm/1700mm, weight: approx. 2300kg. The machine was electrically tested at the end of 2025 and a defect of the emergency stop switch was discovered. Documentation available. On-site inspection is possible. Fpodpfx Afex S Rcmjnjb

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 40898, SPECIFICATION Table size 1270 x 320mm Longitudinal traverse (X axis) 750mm Cross traverse (Y axis) 400mm Vertical traverse (Z axis) 500mm Maximum table load 500Kg Quill travel 127mm Quill feeds 0.04, 0.08, 015mm/rev Quill diameter 100mm Quill taper ISO40 Spindle motor 5.6kW Spindle speeds (inf. variable) 50 – 3800rpm Spindle nose to table 100 – 600mm Spindle centre line to column 500mm Head tilt left or right 0 – 90 degrees Approximate weight 2500Kg Machine in Metric execution   MACHINE EQUIPPED WITH Heidenhain TNC 320 CNC Control Air power drawbar Power rise and fall to knee Interlocked table guard Base splash tray Coolant system Automatic Lubrication system Lighting Vice Fpodox S Nfgjpfx Afneb

Condition: good (used), Year of construction: 2004, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 3,600 mm, Travels: X-axis (lengthwise): 6.000 mm Y-axis (cross): 1.500 mm Z-axis (vertical): 3.600 mm W-axis (Table): 2.000 mm Spindle speeds in 2 steps: 20 up to 4.000 rpm Torque: 1.410 Nm Clamping force: 20.000 N Feed rates X/Y/Z: 2 up to 12.000 mm/min Rapid traverse X-/Y- and Z-axis: 20.000/15.000/25.000 mm/min Drive of the milling spindle at 100% ED: 37 kW EQUIPMENT: CNC-controlled hydrostatic rotary and sliding table, Brand: RÜCKLE, Type: PKTF 8, Year of construction: 1996 -Clamping surface: 2.980 x 3.500 mm -V-axis: 2.000 mm -Table load approx.: 30 tons 120-position tool changer -Tool diameter max.: 125 mm – with free adjacent seats: 250 mm -Tool length max.: 400 mm -Tool weight max.: 30 kg Tool holder (DIN 69871 Form AD): ISO 50 Mobile operator platform Electronic hand wheel HR 420 Chip conveyor 3D thermal expansion compensation Z-axis with level control Tapping without compensating chuck (ratio 1:1) Touch probe system M&H 20.00 wireless Full protection cabin + movable chip protection wall for the rotary table (Setup side/working side) 4-fold milling head changer / Pick-up station 1 piece of Universal milling head , 1° x 2,5° (indexing in the CNC programme) 360 Rear level positions / 144 Front level positions 1 piece of Horizontal milling attachment 1 piece of Universal milling head / Fabrikat: HENNINGER, Type: 880-40 – ISO 40 Internal and external cooling through the spindle Total connected load: 75 kVA Fedpfx Afotw Tx Tonjpb Machine weight: 36,2 tons Space requirement (Length x Width x Height) including RÜCKLE table approx.: 12.435 x 8.420 x 5.085 mm

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 20194, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,500 mm, power: 49 kW (66.62 HP), Features High rigidity for heavy-duty machining Large table for oversized workpieces CNC control with HEIDENHAIN TNC 530 for precision operations Automatic tool changer with 50 positions Centralized lubrication and hydraulic system Fpedpfx Aex S Hgzofnjb

Condition: good (used), Year of construction: 1996, Travel X/Y/Z 600/500/450 mm, Control HEIDENHAIN TNC 410 PA, spindle power 9,0 KW, spindle speed 5-6300 rpm, ISO40, table size 530x900 mm, max. table load 400 kg, tool changer 22 places, dimension 2200x2700x2050 mm, ca. 3550 kgs, accessoires Renishaw tool prove, 4th axis TRIAG with clampings, Software updated, flat screen, radio data transfer installed, tool holders, manuals Fsdpfx Afjqagugonopb

Condition: good (used), Year of construction: 2001, Travel paths: Table size: 630 x 1800 mm X-axis, longitudinal table feed: 1400 mm Y-axis, cross slide movement of spindle holder: 630 mm Z-axis, vertical table movement: 500 mm Spindle: Taper mounting in spindle: ISO 50 Spindle diameter: 100 mm Max. spindle torque: 1600 Nm Number of speeds: 18 Standard speed range: 56-2800 min⁻¹ Spindle motor: Speed: 1430 min⁻¹ Power: 15 kW Max. workpiece weight: 1000 kg Machine weight: 5850 kg Fodpjx H Rqyjfx Afnopb

Condition: good (used), Year of construction: 1989, Conventional Universal Milling Machine, travel X/Y/Z 400/300/400 mm, table size 320x750xmm, 18 speed 40-2000 rpm, motor 2,2 KW, spindle ISO 40, drilling quill 60 mm, tilting head +/- 90°, dimensions 1220x1810x1710 mm, ca. 2020 kgs; accessoires: horizontal milling device, shaping head Fedpfxsip N Rgj Afnopb

Condition: excellent (used), Year of construction: 1987, Travel X/Y/Z 600/600/460 mm, 21 speeds 31,5 - 3150 rpm, motor 4,0 KW, spindle ISO 40, control Heidenhain TNC 150, table size 900x550 mm, hydraulic tool clamping, coolant device, spash guard, rapid feed, horizontal milling device, tilting turning table, clamping set, machine feet, manual, TOP condition Fsdpfjpcf D Iex Afnjpb

Condition: excellent (used), Year of construction: 2007, Universal Milling Machine, gear type, feed range X/Y/Z 500/350/400 mm, table size 800x400 mm, rotary / tilting table 600x300 mm, motor 3 KW, 18 speeds 40-2000 rpm., ISO 40, quill travel 60 mm, boring capacity Ø 40 mm, digital readout on 3 axis, automatic and rapid feeds, horizontal milling head, collant systen, halogen lamp, + round- / tilting table, dimensions 1500x1700x1750 mm, weight ca. 2200 kg; ex demonstration machine Fodpfx Afofvci Ejnjpb

Condition: used, Year of construction: 1980, functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 1,000 rpm, spindle speed (min.): 25 rpm, total height: 1,800 mm, total width: 1,300 mm, total length: 1,600 mm, table width: 250 mm, table length: 1,100 mm, overall weight: 2,400 kg, Universal Milling Machine, gear type, feed range X/Y/Z 700/250/400 mm, table size 250x1100 mm, rotary table, motor 5 KW, 12 speeds 25-1000 rpm., ISO 40, automatic and rapid feeds, horizontal/vertical milling head, collant systen, dimensions 1600x1300x1800 mm, weight ca. 2400 kg Fedexx Tgropfx Afnspb

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 540 mm, travel distance Y-axis: 240 mm, spindle speed (max.): 1,650 rpm, spindle speed (min.): 45 rpm, spindle mount: MK 4, throat depth: 350 mm, quill stroke: 130 mm, total length: 1,250 mm, total height: 1,900 mm, table width: 225 mm, total width: 1,100 mm, table length: 800 mm, drilling capacity: 40 mm, spindle nose: MK-4, nominal power: 2.2 kW (2.99 HP), Milling-/Drilling Machine, drilling capacity Ø 40 mm, motor 1,9 /2,2 KW, table size 800x225 mm, spindle speed 45-1650 rpm stepless, MT-4, el. table arising device, automatic spindle feed, coolant device, dimensions 1250x1100x1900 mm, weight ca. 600 kg Fjdswt Swzopfx Afnepb

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, spindle speed (max.): 2,340 rpm, spindle speed (min.): 32 rpm, spindle mount: MK 4, throat depth: 293 mm, quill diameter: 72 mm, quill stroke: 145 mm, total length: 1,340 mm, total height: 2,050 mm, table width: 225 mm, total width: 1,280 mm, table length: 800 mm, drilling capacity: 50 mm, nominal power: 2.2 kW (2.99 HP), Milling-/Drilling Machine, DRO on 3 axis, drilling capacity Ø 50 mm, motor 2,2 / 3,0 KW, table size 800x225 mm, spindle speed 32-2340 rpm stepless, MT-4, el. tapping device, machine light, coolant device, dimensions 1340x1280x2050 mm, weight ca. 780 kg Fsdpfxown E Sbe Afnjpb

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, quill stroke: 120 mm, quill diameter: 75 mm, total length: 1,000 mm, total width: 850 mm, total height: 1,900 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 50 rpm, spindle mount: MK 3, drilling capacity: 32 mm, nominal power: 0.75 kW (1.02 HP), table length: 730 mm, table width: 210 mm, throat depth: 270 mm, Milling-/Drilling Machine, DRO on 3 axis, drilling capacity Ø 32 mm, motor 0,75, cross table size 730x210 mm, spindle speed 50-2500 rpm, MT-3, tapping device, machine lamp, coolant device, tapping device, dimensions 100x850x1900 mm, weight ca. 400 kg Fodpfxjx Ebi Ie Afnjpb

Condition: good (used), Year of construction: 1987, Travel X/Y/Z 400/250/375 mm, 18 speed 80 - 4000 U/min, motor 2,2 KW, spindle SK 40, control MAHO CNC 232, table size 700x270 mm, hydraulic tool clamping, coolant device, spash guard, 20 tool holders with tools, tool setter, machine vice GOODJ 125 N, clamping set, machine feet, several tools, manual Fsdjlu Hpgjpfx Afnjpb

Condition: excellent (used), Year of construction: 2006, travel distance X-axis: 400 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 1 rpm, quill stroke: 60 mm, total height: 2,100 mm, total width: 2,100 mm, total length: 2,300 mm, table width: 450 mm, table length: 750 mm, rotational speed (max.): 4,500 rpm, rotational speed (min.): 1 rpm, overall weight: 1,900 kg, workpiece weight (max.): 500 kg, Travel X/Y/Z 400/350/300 mm, spindle spped 1 - 4500 rpm, motor 4,5 KW, spindle ISO 40, control Heidenhain TNC 320, table size 750x450 mm, hydraulic tool clamping, coolant device, spash guard, tool holders, manual Fpedpjwb Erzefx Afnsb