Used Mikron Wf3 for sale (179)

Condition: used, Inrush current limiter, soft starter, soft starter, starting current limiter, soft starting choke -Manufacturer: varimax, soft start choke, three-phase choke from CNC milling machine Mikron WF 51C/155 -Type: D 1515 S3 Podpfx Agjkzpngjwsrc -Current: 10A -Dimension: 180/90/H190 mm -Weight: 9.5 kg

Condition: used, Year of construction: 1995, x-travel 750 / 1000 mm y-travel 600 mm z-travel 600 mm control Heidenhain TNC 426 weight of the machine ca. 6500 kg required space 2500 x 3300 x 2500 mm MIKRON VC 750/1000 – CNC Vertical Machining Center Travels: X-axis: approx. 750 / 1000 mm Y-axis: approx. 600 mm Z-axis: approx. 600 mm Table: Table size: approx. 1080 x 580 mm Number of T-slots: 7 T-slot spacing: 90 mm T-slot width: 14 mm Max. table load: approx. 1000 kg Spindle: Spindle speed: 50 – 5000 rpm Spindle taper: ISO 40 Spindle power: approx. 11 kW Tool Changer: Number of tool stations: 30 – 36 Tool interface: ISO 40 Feedrates and Rapid Traverse: Rapid traverse X/Y/Z: approx. 15 m/min Control System: Heidenhain TNC 426 Prsdpewm Rqyofx Agwjc Machine Dimensions and Weight: Dimensions (L x W x H): approx. 2500 x 3300 x 2500 mm Machine weight: approx. 6500 kg

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 5.47.07.02, feed length X-axis: 600 mm, feed length Y-axis: 500 mm, feed length Z-axis: 450 mm, rotational speed (max.): 6,300 rpm, number of slots in tool magazine: 44, TECHNICAL DETAILS Drive power at 44% duty cycle: 9 kW Drive power at 100% duty cycle: 6 kW Max. torque: 52 Nm Machining spindles (vertical and horizontal) Max. torque at the spindle at 44% duty cycle: 800 Nm Number of gear stages: 4 Speed range adjustable (vertical and horizontal): 10 – 6,300 rpm Psdpfswm I N Hsx Agworc Tool holder / Pull stud: SK 40 / DIN 69871 Max. tool weight: 13 kg Tool diameter: 130 mm Pull force: 10,000 N Ejector force: 3,500 N Travel paths in automatic mode Longitudinal movement, spindle feed (X-axis): 600 mm Cross movement, spindle slide (Y-axis): 500 mm Vertical movement, spindle slide (Z-axis): 450 mm Feed drive (AC) Feed rate programmable X / Y axis: 0 – 15,000 mm/min Feed rate programmable Z axis: 0 – 12,000 mm/min Rapid traverse speed X-/Y-axis: 15,000 mm/min Rapid traverse speed Z-axis: 12,000 mm/min Coolant Coolant tank capacity: 150 l Flow rate: approx. 20 l/min Noise emission Sound power: 75 dB(A) Clamping table Table size: 530 × 900 mm Number of T-slots: 4 T-slot width: 14 H7 Table load capacity: 400 kg Tool changer TCD 44 Tool stations: 2 × 22 Tool diameter: 80 / 130 mm Tool length (max.): 350 mm Tool weight (max.): 6 kg Workpiece weight max. in drum magazine: 200 kg Chip-to-chip time: 20-25 s Tool change time: 12 - 16 s MACHINE DETAILS Total weight with protective enclosure: 3,000 kg Total weight with cabin roof: 3,100 kg Ambient conditions Max. permissible ambient temperature: 35 °C Max. permissible relative humidity: 75 % Electrical connection data Total installed nominal power: 15.8 kW Utilized and connection power: 12.3 kW Operating voltage and frequency: 3 × 400 V / 50 Hz

Condition: used, Year of construction: 1981, x-travel 800 mm Prodpfx Agotqqplswjc y-travel 500 mm z-travel 460 mm table surface area 1000 x 500 mm spindle taper SK 40 control HEIDENHAIN TNC 150 spindle turning speed range 31,5 - 3150 U/min feeds longditudinal/cross/vertical 1 - 3000 mm/min rapid traverse longitudinal and cross 6 m/min rapid traverse vertical 4 m/min quill stroke 110 mm distance spindle nose and table max. 559 mm table load capacity max. 500 kg total power requirement 14 kW weight of the machine ca. 3,1 t dimensions of machine L x W x H 2,15 x 1,8 x 2,15 m Accessories: vertical head with hydr. tool clamping and quill retraction, solid table, coolant

Condition: used, Year of construction: 2008, x-travel 1.850 mm y-travel 1.400 mm z-travel 720/905 mm Control SIEMENS SL 840 D spindle turning speed range 15.000 U/min B - axis -20 / +120 ° Tool bore HSK-A63 0 tool magacine with 45 Plätzen tool length - max. 365 mm workpiece diameter at used places besides 90 mm tool diameter with 2 vacant positions 130 mm NC rotary table 1.600 mm T-slots 12 groove width 18H12 flute distance 100 mm table load capacity 3.000 KG Table speed max. 30 1/min total power requirement 89 kW weight of the machine ca. 26 t dimensions of the machine ca. 7,00 x 6,20 x 4,15 m 5-Axis machining center with Siemens SINUMERIK 840D control, BLUM Laser, Renishaw, RotoClear, Fire extinguishing system, 2x electronic handwheel, Steptec spindle, Spindle oil cooler, coolant through the spindle, Psdpfx Asvxwuwogwjrc High pressure pump, Bürener belt filter system, Chip conveyor. Machine can be inspected under power

Condition: ready for operation (used), Year of construction: 2007, operating hours: 29,655 h, functionality: fully functional, machine/vehicle number: 73.110, travel distance X-axis: 1,350 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 700 mm, table width: 1,100 mm, table load: 1,600 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 92, swivel angle A-axis (min.): -120 °, swivel angle A-axis (max.): 16 °, Insolvency auction - all machines functional and ready for demonstration. Property of a German GmbH TECHNICAL DETAILS X-axis (longitudinal): 1,350 mm Y-axis (transverse): 1,150 mm Psdpfxevxr I Ee Agworc Z-axis (vertical): 700 mm A-axis: +16° / -120° C-axis: n x 360° Simultaneously controllable axes: 5 axes Control: Heidenhain iTNC 530 Spindle speed: 12,000 rpm Tool magazine: 92 slots Feeds and travel speeds X and Y axis: 15 / 30 m/min Z axis: 15 / 30 m/min A axis: 11 / 20 rpm C axis: 40 rpm Work table Clamping surface: Ø 1,100 mm Max. workpiece weight: 1,600 kg MACHINE DETAILS Machine: 12,600 kg Dimensions: 4,650 x 3,030 x 3,300 mm Connected load: 75 kW Operating voltage: 400 V, 50 Hz Noise protection level: 68 dB(A) Program run: 34,205 h Spindle hours: 29,655 h EQUIPMENT - without magnetic table

Condition: used, Main spindle with drive motor, universal milling head, milling holder, milling extension, angle milling head, upper support, upper slide, dovetail guide, tool slide, cross table -Manufacturer: Mikron, upper support tool slide from CNC milling machine Mikron WF 51C/155 -Motor: AEG 380V 8 kW 1400/2850 rpm -Dimensions: see photos / technical. drawing Pedpskvrptsfx Agwsrc -Dimensions: 1700/580/H700 mm -Weight: approx. 525 kg

Condition: like new (used), Year of construction: 2001, x-travel 600 mm y-travel 450 mm z-travel 450 mm weight of the machine ca. 6500 kg required space 3,900 x 3,500 x 2,700 mm MIKRON VCP 600 – CNC Vertical Machining Center (Year of Manufacture: 2001) The MIKRON VCP 600 is a precise 3-axis CNC vertical machining center, ideally suited for high-accuracy machining of complex workpieces. With its robust construction, high-performance spindle, and reliable Heidenhain control system, it meets the highest standards in both single-part and series production. All specifications are provided without guarantee. Exact technical details will be provided at the time of purchase. Control system: TNC 426/430 Travel Paths X-axis: 600 mm Y-axis: 450 mm Z-axis: 450 mm Table Prsdpfowmzgfjx Agwoc Table size: 850 x 530 mm Maximum table load: 400 kg Number of T-slots: 6 T-slot spacing: 63 mm T-slot width: 14H12 mm Spindle Spindle speed: 100 – 20,000 rpm Spindle power: 12 / 16 kW Tool holder: HSK-A63 Tool Changer Number of tool positions: 30 Max. tool diameter: 90 mm Max. tool diameter with adjacent slots empty: 110 mm Max. tool length: 250 mm Max. tool weight: 6 kg Chip-to-chip time: approx. 7 seconds Feed and Rapid Traverse Feed rate: 0 – 22,000 mm/min Rapid traverse: 22 m/min Feed force (X/Y/Z): 5,000 N Dimensions and Weight Machine weight: approx. 6,500 kg Installation dimensions (L x W x H): approx. 3,900 x 3,500 x 2,700 mm

Condition: used, Year of construction: 1997, x-travel:710 mm y-travel:630 mm z-travel:500 mm turning speed range - spindle:5 - 5000 1/min power - main spindle:11 kW tool taper:SK 40 tool changer:44 Werkzeuge feed:10 m/min Prsdslu N Hiepfx Agwjc surface area:1200 x 600 mm table load:0,5 t total power requirement:15 kVA weight of the machine ca.:4,24 t Toolchanger with 44 tools, pendant handwheel for easy setup.

Condition: used, Year of construction: 1998, x-travel 710 mm y-travel 630 mm z-travel 500 mm table surface area 1100 x 585 mm rotary table dia. 500 mm spindle taper SK 40 spindle turning speed range 5 - 6300 U/min spindle power 11 kW no. of tools in magazin 2 x 22 control HEIDENHAIN, TNC 426 total power requirement 20 kW weight of the machine ca. 5,8 t Accessories: various tool holders, probe RENISHAW OMP 60, Pjdpfotz Sqhox Agwsrc coolant

Year of construction: 2023, condition: new, Polyp Scrap Grapple for Cranes Palfinger Hiab Capacity: 300 Lt / 0.3 m3 Model: 4 Tinned - Half Closed Predpfx Agjnziblswoc Gross Weight: 450 Kg

Condition: ready for operation (used), Year of construction: 2006, operating hours: 21,967 h, functionality: fully functional, machine/vehicle number: 84.34, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 700 mm, table width: 1,000 mm, table load: 1,100 kg, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 46, swivel angle A-axis (min.): -120 °, swivel angle A-axis (max.): 16 °, Insolvency auction - all machines functional and ready for demonstration. Property of a German GmbH TECHNICAL DETAILS X-axis (longitudinal): 1,000 mm Y-axis (transverse): 1,150 mm Z-axis (vertical): 700 mm A-axis: +16° / -120° C-axis: n x 360° Simultaneously controllable axes: 5 axes Control: Heidenhain iTNC 530 Spindle speed: 15,000 rpm Tool magazine: 46 slots Feeds and travel speeds Pjdpfevxr Ilsx Agwerc X and Y axis: 15 / 30 m/min Z axis: 15 / 30 m/min A axis: 11 / 20 rpm C axis: 40 rpm Work table Clamping surface: Ø 1,000 mm Max. workpiece weight: 1,100 kg MACHINE DETAILS Machine: 12,300 kg Dimensions: 4,600 x 3,030 x 3,300 mm Connected load: 75 kW Operating voltage: 400 V, 50 Hz Noise protection level: 68 dB(A) Program run: 40,095 h Spindle hours: 21,967 h EQUIPMENT - without magnetic table

Condition: used, PLC control, power module, LT module, E/R module, regenerative module, CNC control, safety slot universal module, plug-in cards, printed circuit boards, control card, circuit board -Manufacturer: Mattle Mikron, safety insert universal module board from CNC milling machine Mikron UME 600 Prsdpfx Agorb E Ewjwjc -Safety module: Type SEMU TN 24VDC -Board: Mikron 958 74 10 275 S300 -Dimensions: 300/170/H200 mm -Weight: 1.4 kg

Condition: excellent (used), functionality: fully functional, total length: 1,120 mm, gear diameter: 100 mm, total height: 1,680 mm, total width: 1,120 mm, workpiece diameter (max.): 100 mm, milling spindle length: 100 mm, type of input current: three-phase, milling length: 100 mm, spindle speed (max.): 2,400 rpm, spindle speed (min.): 200 rpm, overall weight: 500 kg, rotational speed (max.): 2,400 rpm, rotational speed (min.): 200 rpm, ⚙️ Mikron Type 132-02 (23) Gear Hobbing Machine – Very Good Condition | For Sale in Ireland 📍 Location: Ireland 💼 Condition: Very Good 🔧 Machine Type: Manual Gear Hobbing Machine ✅ In Stock and Ready for Inspection Psdpfx Aewqr T Djgwjrc 🔍 Description: We are offering a Mikron Type 132-02 (23) Gear Hobbing Machine in very good mechanical condition. Manufactured in Switzerland, this machine is designed for precision cutting of spur, helical, and spline gears. Highly regarded for reliability and build quality, it’s an excellent choice for toolrooms, gear repair workshops, and small-scale gear production. The machine is fully functional and ready for immediate delivery from our facility in Ireland. 🧾 Technical Specifications: Manufacturer: Mikron Model: Type 132-02 (23) Control: Manual / Mechanical Gear Types: Spur, helical, spline Workpiece Capacity: Small to medium gears Workholding: Tailstock and chuck Drive Type: Mechanical with gear-driven spindle speeds Country of Origin: Switzerland Max Diameter: 100mm (4") Max Length: 100mm (4") Number of Teeth: 6-400 Max Pitch in Steel: 15 D.P. Max Pitch in Brass & Light Metal: 12 D.P. 12 Hob Revs: Geometrically Graded Between 200-2400rpm Feed: Horizontal or Plunge-Cutting Feed Speed: Hydraulically or Infinitely variable between 0.05 and 1mm per rev. Main Motor: 1.5hp Coolant Pump Motor: 0.1hp Hydraulic System Motor: 0.1hp Dimensions: 1120x1120x1680mm Machine Weight: 500kg Included Accessories: Hob arbors Tailstock 📦 Additional Information: ✅ Located in Ireland – available for inspection ✅ Ready for immediate dispatch 🚛 European and nationwide delivery available Mikron gear hobbing machine | Used Mikron 132-02 (23) for sale | Gear cutting machine Ireland | Spur gear hobbing lathe | Manual gear cutting machine UK Europe | Mikron hobbing machine used | Gear manufacturing toolroom machine

Condition: repair required (used), Year of construction: 2003, Parts shown by hand not come. Pallete changer EROWA not come. Pjdpfx Aom Dtnrsgwerc

Condition: used, Heidenhain Active - Digital Display Stepless feed Lamp Cooling device Travel X / Y / Z 420 / 250 / 345 mm Prsdpfx Agjcmzzgowoc Speed 50 - 2240 rpm feed in 3 axes 0 - 750 mm/min Rapid traverse in 3 axes 1400 mm/min ISO 40 mounting vertical / horizontal quill extendable Dimensions approx. 1.2 x 1.2 x 1.6 m

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 621, Multi station Electrode Holder prepared for Erowa holders - 48 Positions - Made by Mikron Unit was fully integrated and working with a CNC Milling Machine Mikron HSM400U Pjdswhfl Iopfx Agwsrc

Condition: good (used), Mikron milling machine WF2/35 - Width: 120 cm - Depth: 140 cm - Height: 180 cm Good condition, fully functional, can be viewed and tested on site. Shipping also abroad. Inspection : Basically, I would like to point out that the item can be inspected and tested under power before purchase to avoid misunderstandings. Please ask questions before buying to avoid any ambiguities. For general questions or to make an appointment for a viewing, I can be reached at any time at the telephone number below or above. Prodsum Rpyspfx Agwsc Errors in the description and prior sale reserved. VAT is shown separately on my invoices. Shipping with forwarding agent.

Year of construction: 2018, condition: used, Computer monitor, screen, TFT industrial monitor -Monitor: TFT industrial monitor from CNC milling machine Mikron UME 600 Psdpfercnmzex Agwerc -Type: 12.1" TFT industrial monitor 2363130 -Dimensions: 400/320/100 mm -Weight: 3.1 kg

Condition: excellent (used), functionality: fully functional, total length: 1,120 mm, gear diameter: 100 mm, total height: 1,680 mm, total width: 1,120 mm, workpiece diameter (max.): 100 mm, type of input current: three-phase, milling length: 100 mm, spindle speed (max.): 2,400 rpm, spindle speed (min.): 200 rpm, overall weight: 500 kg, rotational speed (max.): 2,400 rpm, rotational speed (min.): 200 rpm, ⚙️ Mikron Type 132-02 (M23) Gear Hobbing Machine – Very Good Condition | For Sale in Ireland 📍 Location: Ireland 💼 Condition: Very Good 🧰 Machine Type: Manual Gear Hobbing Machine ✅ In Stock and Ready for Inspection 🔍 Description: We are offering a Mikron Type 132-02 (M23) Gear Hobbing Machine, in very good working condition. This Swiss-engineered model is ideal for high-precision gear cutting, capable of producing spur, helical, and spline gears. Built for reliability and accuracy, it is particularly well-suited for toolrooms, gear manufacturing, and precision engineering applications. 🧾 Technical Specifications: Make / Model: Mikron 132-02 (M23) Machine Type: Manual Gear Hobbing Control: Manual/mechanical (non-CNC) Workpiece Capacity: Small to medium-size gears Spindle Speeds: Manually adjustable gear ranges Hob Slide: Vertical with fine feed adjustment Workholding: Tailstock and chuck system Country of Origin: Switzerland Condition: Very good – clean and mechanically sound Max Diameter: 100mm (4") Max Length: 100mm (4") Number of Teeth: 6-400 Max Pitch in Steel: 15 D.P. Max Pitch in Brass & Light Metal: 12 D.P. 12 Hob Revs: Geometrically Graded Between 200-2400rpm Feed: Horizontal or Plunge-Cutting Feed Speed: Hydraulically or Infinitely variable between 0.05 and 1mm per rev. Main Motor: 1.5hp Coolant Pump Motor: 0.1hp Hydraulic System Motor: 0.1hp Prjdpfjwqr S Hsx Agwsc Dimensions: 1120x1120x1680mm Machine Weight: 500kg Accessories Included: Hob arbors Change gears and tooling 📦 Additional Details: ✅ Located in Ireland – quick dispatch available ✅ Fully functional 🚛 Nationwide and European delivery available 🔍 Inspection welcome by appointment Mikron M23 gear hobbing machine | Used gear cutting machine for sale | Mikron 132-02 lathe | Manual gear hobber Ireland | Spur and helical gear machine | Toolroom hobbing lathe | Mikron Switzerland gear cutter | Gear hobbing machine in stock Europe

Condition: excellent (used), Year of construction: 1987, Travel X/Y/Z 600/600/460 mm, 21 speeds 31,5 - 3150 rpm, motor 4,0 KW, spindle ISO 40, control Heidenhain TNC 155, table size 900x550 mm, hydraulic tool clamping, coolant device, spash guard, rapid feed, horizontal milling device, tilting turning table, clamping set, machine feet, manual, TOP condition Podpfxepcf D Ie Agwerc

Condition: good (used), Mikron C axis machine table - with Heidenhain control 430 - Siemensservermotor - table: 60 x 110 cm - 4th axis, diameter: 50 cm - weight: 650 kg Good condition fully functional can be viewed and tried on site. Shipping also abroad. Viewing : Basically, I would like to point out that to avoid misunderstandings, the item is welcome to be inspected and tested under power before purchase. Please ask questions before buying to avoid ambiguity. For general questions or to make an appointment for a viewing, I am, at the phone number below or above, always available. Errors in the description and subject to prior sale. Pedeic Rviepfx Agwjrc VAT is shown separately on my invoices. Shipping with forwarding agent.

Condition: used, CNC control, control panel, machining center operator panel, control unit, control panel, control unit -Manufacturer: Mikron, operating unit -Type: TCD 22 - DIN 8659 Pjdpeprb Dvefx Agworc -Printed circuit board: WW TCD 22 control unit 104.73.20.042 -Individual components: see photos -Dimensions: 480/130/H240 mm -Weight: 5 kg

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table Predpfx Agjrbm Udjwjc -Manufacturer: Mikron, milling machine table T-slot table from CNC machining center UME 600 -Table surface: 530 x 900 mm -T grooves: groove width 14 mm, groove spacing 63 mm -Transport dimensions: 900/530/H390 mm -Weight: 248 kg

Condition: good (used), Electronic handwheel, Simatic panel, operator panel, machine control, interface panel, control panel, operating unit, control panel, HMI panel, hand terminal, hand control panel Podporc Ikxofx Agwjrc -Manufacturer: Mikron, hand terminal control panel from CNC milling machine Mikron UME 600 -Connection plug: see photos -Transport dimensions: 400/240/H95 mm -Weight: 1.1kg