Used Mikron Wf2 for sale (192)

Year of construction: 2001, condition: like new (used), CNC Vertical Center MIKRON HAAS VCE 500. Control: HAAS Year: 2001 Kfsdsh D E Dujpfx Affoa

Year of construction: 1986, condition: good (used), Speed range: 31.5 - 3150/min. Control: Heidenhain TNC 155 Traverse: X axis 630 mm Y-axis 500 mm Z axis 460 mm Feed speed: 1 - 3000 mm/min. Kfjdpofhmd Ujfx Affea in rapid traverse X - Y: 6000 mm/min in rapid traverse Z: 4000 mm/min.

Year of construction: 2015, condition: excellent (used), machine/vehicle number: K02G1.0018A, Feeding from wire with straightener and saw discharge via hose 24 stations - 10 drilling units (up to 25,000 1/min.) from above or below - 7 drilling units (up to 25,000 1/min.) crosswise - 2 overturning units - 2 grooving units - 2 turning units - 1 cut-off saw finished part - units equipped with FU - Spare units partly available Chip conveyor Fire extinguishing system Kraft&Bauer No electrostatic precipitator No coolant system Kedpfepkyiaox Affsfa The machine is available from 08.01.2024 The machine is currently running in automotive series production. A visit under chip is therefore possible.

Condition: not inspected (used), Year of construction: 2005, travel distance X-axis: 750 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 500 mm, rotational speed (max.): 10,000 rpm, overall weight: 4,200 kg, table 900x350 mm travels 750x410x500 mm spindle ISO 40 max speed 10,000 rpm Kedpsx Irxzofx Affjfa weight 4,200 kg

Condition: good (used), Year of construction: 2004, * CNC-control Heidenhain iTNC 530 * Number of Controlled Axes: 5 + spindle * NC-swivel-type rotary table, diameter 800 mm - Workpiece weight in clamped horizontal position 1000 kg - Positioning mode for both axes 600 kg (upper 30 deg. 500 kg) - 4-5 axes simultaneous mode 400 kg - Swivel range 45 deg. to the work spindle, 25 deg. away from the work spindle * 60-Position Tool Changer * Direct Measuring System, Resolution 0.001 mm * Coolant System (no coolant through spindle) * Chip Conveyor x-travel 800 mm y-travel 1000 mm z-travel 655 mm Feed Rate: 10,000 mm/min Rapid Traverse: 30,000 mm/min Spindle Speed: 0 - 15000 rpm Tool Holder: ISO 40 Power: 18/24 kW Total Power Requirement: 40 kW Machine Weight: 10,500 kg Kfedpfxox E T Rtj Affea

Condition: good (used), Year of construction: 1998, operating hours: 6,000 h, functionality: fully functional, machine/vehicle number: 107.40.98.165, Year 1998 Heidenhain TNC 430 710x500x500 mm - 42000 RPM Netweight 5670 kg Dimensions 2794x2997x3035* mm TECHNICAL DATA Table Dimensions 1220 x 457 mm Admitted load 1575 kg T-grooves 14 mm Number of T-grooves 5 Travels Longitudinal X 1016 mm Transverse Y 508 mm Vertical Z 635 mm Workspindle Power of AC-motor, 2-stepped gears 11kW Speed range, continuous 10-7500 min-1 Spindle speed (option) 10'000 rpm Taper ISO40 Feeds drive Feed programmable axes X, Y & Z 0 – 7620 mm/min Rapid feed axes X, Y, Z 18,0 m/min Automatisation Tool changer 20 pos Tool changing time (for nearby posts) 5,0 sec. errors and omissions excepted-data given without obligation Inventory Nr.4112006, machine equipped with  : Kfsdpfx Afecl Rurofja NC Heidenhain TNC430M Milling spindle 42’000 min-1, HSK 40 E 36 tool positions Electronical handwheel Tool measuring Renishaw TS27 Ethernet card Minimal quantities greasing Unilube Aspiration Lumestat Protection cabin Rotary table Air passage through rotary table Vacuum clamping (by external provider) Spray gun Chips conveyor

Condition: good (used), Year of construction: 1995, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, x-travel 1000 mm y-travel 600 mm z-travel 600 mm Control: Heidenhain TNC 426 Spindle nose: 100–700 mm Work table: 1,080 x 580 mm Kfodpfx Aox H R Ekoffea Max. workpiece weight: 550 kg T-slots: 7 pcs. T-slot width: 14 mm Tool magazine with 36 positions Max. tool weight: 8 kg Max. tool length: 340 mm Machine weight approx. 6.2 t Space requirement approx. 4,790 x 5,330 x 2,905 mm

Condition: good (used), Year of construction: 2006, 1. TECHNICAL DATA Working area X axis: 400 mm Y axis: 450 mm Z-axis: 350 mm B-axis: +-110 ° C axis: 360 ° Working spindle Speed range: 100 - 42`000 rpm tool holder: HSK E 40 spindle power at 40 % ED: 13 spindle power at 100 % ED: 10 Torque at 60 % ED: 4,25 Torque at 100 % ED: 3,2 Lubrication: oil/air Feed rate Rapid traverse speed: Max. 40 m/min B axis: 150 rpm C axis: 250 rpm Axis acceleration, XYZ: Max. 1g (10 m/s2) B axis: 100 rad/s2 C axis: 300 rad/s2 Tool changer: 68-fold Chip to chip: 12.5 s Tool change time: 10,0 s Work table: 120 mm Max workpiece diameter that can still be rotated 360 °: 230 mm Max. Workpiece height: 350 mm Max. Workpiece weight: 25 kg Hfsbrjigrf Ie Icm Ener Ksdpfx Afjx H Ntaofefa Control: Heidenhain iTNC 530 Weight: 5500 kg

Condition: good (used), Safety switch, safety switch, protective grid switch Kjdjrb E E Eepfx Affjfa -Manufacturer: Euchner, Safety switch from CNC milling machine Mikron UME 600 -Type: TZ2LEO24M ID No.: 090559 Technical data: see photo of the nameplate Quantity: 1 piece available -Dimensions: 170/110/40 mm -Weight: 1.1 kg

Condition: ready for operation (used), Year of construction: 2001, Control Unit Model Automation Kedpfx Afox D Rpzofefa Brand HAAS Main Drive Number of axis 4 Movement X-Axis Movement 1300 mm Y-Axis Movement 550 mm Z-Axis Movement 710 mm Additional Equipment Two coolant pumps: external cooling and internal cooling through the spindle Rotary table for use on the A-axis Renishaw measuring system (without touch probe) This 4-axis MIKRON VCE 1300/40 was manufactured in 2001. It features a large travel range with X = 1300 mm, Y = 550 mm, and Z = 710 mm, and a tool magazine that holds 32 tools with an SK40 chuck. Equipped with a Haas Rotary Table and Renishaw measuring system, it's ideal for precise machining tasks. Consider the opportunity to buy this MIKRON VCE 1300/40 vertical machining centre. Contact us for more information about this machine. Application Types Milling

Condition: good (used), Year of construction: 1999, Technical details: x-travel 1350 mm y-travel 900 mm z-travel 750 mm Table size 1400 x 840 mm Feed rate 10000 mm/min Rapid traverse 30000 mm/min Spindle speed 12000 rpm Tool taper ISO 40 total power requirement 46 kW weight of the machine ca. 10,1 t Heidenhain iTNC 530 CNC control 46-station ATC Coolant system Coolant through spindle Chip conveyor Kfjdpfxsx E T I Es Affoa Direct measuring system with 0.001 mm resolution Electronic handwheel

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Mikron / GF HPM 450 U WPC with Pallet Changer About the machine: High-precision 5-axis simultaneous milling machine with 7-position pallet changer (WPC). Excellent condition, extensive equipment! Very low spindle hours! Technical data: - Heidenhain ITNC 530 HSCI - X-axis: 600 mm - Y-axis: 450 mm - Z-axis: 450 mm Kodpfsx Hx Rhex Affsfa - B-axis: +45° / -120° - C-axis: 360° - Spindle speed range: 20,000 rpm - Spindle drive: 23 / 30 kW - Torque: 91 Nm - Tool holder: HSK 63 - Pallet size: 280 x 280 mm - Max. pallet load: 150 kg - Number of tool magazine pockets: 60 - Max. tool diameter: 90 (130) mm - Max. tool length: 200 mm - Max. tool weight: 6 kg - Tool change time: 3 sec. - Feed force X-Y-Z: 5 kN - Rapid feed X-Y-Z: 22 m/min - Acceleration X-Y-Z: 5 m/s² - Rapid traverse B-axis: 50 rpm - Rapid traverse C-axis: 140 rpm Accessories: - 7 pallets, including 6 pallets with clamping devices (see photo) - Electronic handwheel - Infrared measuring probe - Laser tool measurement - Direct path measuring systems - APS Advanced Process System - ITC Intelligent Thermal Control - rConnect Live Remote Control (1 year) - KinematicsOpt - CT 60 tool magazine - DYNAFIX 7-position pallet changer - SIGMATEC 15 / 900 cbm/h oil mist extraction system - Tool blow-off device - Blowing air at the spindle carriage - Blowing air through the spindle center - Internal coolant supply 18–70 bar - Paper band filtration system - Chip conveyor - Spindle oil cooler Machine dimensions L x W x H: 6600 x 4000 x 2800 mm Weight: approx. 8,600 kg An inspection/test under power onsite is of course possible. We are not your average machine dealer – here, you will be advised by a CNC expert! We are happy to offer you transport, installation and setup, as well as commissioning and a machine training session, all performed by our own technicians. Everything from one source: Baumgärtner CNC GmbH & Co.KG is a company specialized in: - Service - Maintenance - Overhaul - Automation of DMG machines and other well-known manufacturers. We support you! From machine purchase, through transport and installation, to commissioning and subsequent maintenance or repair work, you can rely on us.

Condition: excellent (used), Year of construction: 1993, travel distance X-axis: 750 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 1 m/min, rapid traverse Y-axis: 1 m/min, rapid traverse Z-axis: 1 m/min, total height: 2,690 mm, total length: 2,230 mm, total width: 2,360 mm, spindle speed (min.): 10 rpm, spindle speed (max.): 7,500 rpm, mount diameter: 200 mm, load capacity: 340 kg, Micron VCE 750 – Despite its age, the machine is in excellently maintained condition and has only been operated in single-shift use. Kedpsp Sq Trsfx Affofa Manufacturer: Mikron Model: VCE 750 Year of manufacture: 1993 Control: Mikron CNC (Haas) Travel: X = 750 mm Y = 400 mm Z = 500 mm Spindle speed: 10 – 7,500 rpm Drive power: 7.5 kW Spindle Tool holder: SK 40 Tool changer: 20 tools Rapid traverse: 12.7 m/min Max. feed rate: 5.0 m/min Worktable: 356 x 914 mm clamping surface Max. table load: 340 kg Weight: 3,620 kg Dimensions: 2,230 x 2,360 x 2,690 mm (L x W x H)

Condition: used, Year of construction: 2007, Serial no. 107.51.00.013, Control unit: Heidenhain make, Type: ITNC530, 5 axes, rotary/swivel table, travel X/Y/Z 1,000 x 700 x 700 mm, electrospindle by Step Tec, max. speed 24,000 rpm, 5-position pallet station, pallet size 500 x 600 mm, 165-position tool changer, tool holder HSK 63, chip conveyor, belt filter, ICS (internal coolant supply), coolant temperature control, enclosure, BLUM laser measuring system, tool and accessory package, workbench, mobile, 6 drawers, single-door, WTS cart, orange, 2 table carts, contents: tool holders, clamping devices, FCS zero-point clamping system, 5 grid plates, HD vise. Kfsdpfx Asxug Aloffsa +++ Attention: Machine is part of an online auction! +++

Condition: used, Year of construction: 2001, operating hours: 27,000 h, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 350 mm, controller manufacturer: Heidenhain, controller model: TNC 430 M, total height: 2,830 mm, total length: 3,200 mm, total width: 2,600 mm, STEP TEC Spindle, Type HVC140-SB-10-15/42-3F-HSK-E40 Spindle Hours: 26,897 h Feed Drives: • Axes X, Y, Z: • A.C. servomotor, 3000 rpm with timing belt • Ball screw drives • 0–40 m/min • 1 g (10 m/s²) Tool Spindle 42,000 rpm • Tool holder: HSK E40 • Speed range: 100–42,000 rpm • Power at 40% duty cycle: 13 kW • Power at 100% duty cycle: 10 kW • Torque at 40% duty cycle: 4.25 Nm • Torque at 100% duty cycle: 3.2 Nm • Lubrication: oil-air Pallet Table HSM 400 • Erowa UPC: 320 mm × 320 mm • Max. workpiece weight: 200 kg Control Unit • Heidenhain: TNC 430 M Tool Changer • Number of tools (HSK E40): 36 Workpiece Changer (WPC) • Number of pallets: 7 Kfodpfxex Hii Io Affea Cooling Unit • Cooling capacity: 5.8 kW • Flow rate: 5 l/min Electrical Connection Data • Installed nominal power: 16 kW • Control voltage: 24 V DC • Operating voltage: 3 × 400 V – 50/60 Hz • EMC immunity: according to EN 50081-1 and EN 50082-2 • Radio interference suppression: according to EN 55011, Class A • Protection of 400 V/50 Hz supply: 30 A slow-blow (30AT) • Protection rating: IP 54 Additional Equipment: Chip conveyor, assortment of tools in the magazine, and touch probe

Condition: ready for operation (used), Year of construction: 2003, General Data Measurements width 1950 mm Measurements depth 5200 mm Measurements height 2900 mm Machine weight 4500 kg Main Drive Spindle speed range 23000 Tools Number of station 24 This MIKRON Multistar CX 24 Rotary Transfer Machine was manufactured in the year 2003 in Switzerland. It excels in accurately producing part families and intricate workpieces in large quantities. Its table index offers exceptional repeatability of ± 2.5 µm. With 24 stations equipped with up to 44 machining units, it ensures incredibly high output rates. This Rotary Transfer Machine located in Germany comes with loading station (brass D= 3.9mm), unloading station, part selector (8 compartment, see picture), lateral drilling unit, rotating straightener (October 2023 completely new in stock), feed / sawing unit (control and inverter overhauled in 2021), pneumatic loading (via feed pipe), chip conveyor with waste water pump, KNOLL coolant system (2,000 liters) with drum screen filter, flushing pump and vacuum pump including low-pressure pump (5 bar) and high-pressure pump (60 bar). Tailored for industries such as electrical, automotive, gas, medical, and watchmaking, the Mikron Multistar CX-24 is renowned for its precision, speed, adaptability, and ability to be tailored to specific needs – making it a standout performer in its class. Several modifications have been made for this machine, from cables replacement to complete overhaul of the saw (see extra information below for full description of all modifications). Product brochures (DE/EN) attached for more details information on technical specifications. Contact us anytime for further questions. Kfsdpfxjx D Erdj Affoa Application Types Milling

Condition: excellent (used), Mikron Gear Hobbing Machine A33/0 – for Module 0.5 to 2.5 – rarely used Manufacturer: Mikron Model: A33/0 – Gear Hobbing Machine (vertical) Version: Base machine with standard milling head Condition: used, very good condition, machine has been rarely operated Color: green Technical Data Max. workpiece diameter: approx. 80 mm Max. hobbing length: approx. 150 mm Module range: approx. 0.5 – 2.5 Ideal for small gears in the module range 0.5 – 1.0 Main drive: 3 kW Electrical connection: 3 x 380 V AC, 50 Hz Total power consumption: approx. 9.5 kVA Dimensions & Weight L x W x H: approx. 1,450 x 1,380 x 2,080 mm Weight: approx. 2,200 kg Special Features Kfodox A D Izopfx Affea Very well-suited for manufacturing small gears (module 0.5 – 1.0) Machine was rarely used in production, therefore minimal wear Availability / Service Detailed photos and operating video available upon request Quotation including price, delivery terms, and lead time possible Subject to prior sale and errors.

Condition: used, Year of construction: 2015, x-travel 1.200 mm y-travel 600 mm z-travel 675 mm Control C 620 HSCI FS table-size 1.220 x 620 mm 40 fach Distance between table and spindle 735 mm turning speeds 10.000 U/min Kjdpfx Asx Ak Hdsffefa spindle drive 18 kW Internal cooling system 30 bar -Electronic steering wheel. -LINEAR RULES. -Laser probe measuring tools. -Preparation for piece measuring probes. PROBE NOT INCLUDED.

Year of construction: 1997, condition: used, Price: On request - Year: 1997 - Documentation available: No - CE certificate present: No - Drive system: CNC - Power [kW]: 22.0 - Number of axes [pcs]: 3 Kfjdpfxewnh Hhs Affsa - X-axis travel [mm]: 1000 - Y-axis travel [mm]: 750 - Z-axis travel [mm]: 750 - Tool holder: ISO40 - Max. spindle speed [rpm]: 12000 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 107.44.00.407, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, workpiece weight (max.): 500 kg, total height: 3,200 mm, total width: 3,200 mm, table width: 600 mm, table height: 2,400 mm, table length: 600 mm, rotational speed (min.): 50 rpm, rotational speed (max.): 20,000 rpm, overall weight: 10,000 kg, spindle speed (max.): 20,000 rpm, spindle motor power: 15,000 W, number of spindles: 1, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The MIKRON UCP 800 Duro, manufactured in 2018, is a high-performance 5-axis machining center equipped with a Heidenhain iTNC 530 control system. The machine offers travel paths of 800 x 650 x 500 mm (X/Y/Z) and features a C-axis with an endless 360° swivel range. The installed spindle/adapter types are NCD 150 PL and NCD 200 PL with HSK-E63 interface. The illustrated table system is currently not mounted. The machine comes equipped with a chip conveyor, a coolant system with filter, as well as complete documentation. The machine is available free loaded on truck (FCA) and has seen very little use overall. The operating hours clearly indicate: Control ON: 30,064 h Machine ON: 10,322 h Program Execution: 4,159 h Drives ON: 7,331 h Spindle ON: 4,231 h The machine is under power and can be demonstrated at any time. Kfjdpfex D Ux Tsx Affsa

Condition: ready for operation (used), Year of construction: 2004, operating hours: 24,998 h, General Data Machine weight 6500 kg Kfjdpfsx D E Rtsx Affea Control Unit Brand HEIDENHAIN Model ITNC530 Main Drive Spindle speed range 24000 Tool taper HSK-A63 Number of axis 3 This 3-axis MIKRON HSM 800 was manufactured in 2004. It features a 24,000 rpm spindle, HSK A 63 interface, and ITNC530 control. Equipped with a tool changer, protective cabin, chip conveyor, and band filter system. Includes a pallet changer and vacuum docking table. If you are looking to get high-quality milling capabilities consider the MIKRON HSM 800 machine we have for sale. Contact us for more information about this machine. Application Types Milling

Condition: used, Empty weight: 2.000 kg Dimensions (LxBxH): 245 x 210 x 186 cm - Documentation available: Yes - CE certificate present: No - Drive system: CNC - Control system brand: Heidenhain - Control system type: TNC 114 - Number of axes [pcs]: 3 - X-axis travel [mm]: 560 - Y-axis travel [mm]: 500 - Z-axis travel [mm]: 560 - Table length [mm]: 750 - Table width [mm]: 425 - Tool holder: ISO40 - Min. spindle speed [rpm]: 40 - Max. spindle speed [rpm]: 4000 - Options: Digital readout Kodpfswnhqtjx Affsfa - └ Type of digital readout: Heidenhain TNC 114 - Transport dimensions: 2450mm x 2100mm x 1860mm (l x w x h) - Transport weight [kg]: 2000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Year of construction: 1997, Control Unit Brand HEIDENHAIN Model TNC 410/426 Tools Max weight 12 kg Max tool diameter 200 mm Type of tool holder SK 40 / DIN 69871 Kfedpfxox D Id Ae Affea Additional Equipment Noise Emission: Sound power level of 75 dB (A) This 3-axis MIKRON UM 600 vertical machining center was manufactured in 1997. If you are looking to get high-quality milling capabilities, consider the MIKRON UM 600 machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2009, General Data Measurements width 2300 mm Measurements depth 5100 mm Measurements height 3090 mm Machine weight 12600 kg Kodpfjx D I Nxox Affjfa Control Unit Brand HEIDENHAIN Model i TNC 530 Main Drive Spindle speed range 15000 Spindle motor power HSK-A 63 Number of axis 5 Movement X-Axis Movement 1350 mm Y-Axis Movement 1150 mm Z-Axis Movement 700 mm A-Axis Movement 136° (-16 +120) Table Table load 1600 kg Additional Equipment A.P. cooling through spindle Chip evacuation Tool control with Dual Laser Radio frequency touch probe Air through spindle APS (Advanced Process System) ITC (Intelligent Thermal Control) This 5-axis MIKRON HPM 1350U was manufactured in 2009. A universal machining centre, it offers advanced capabilities for diverse and complex machining tasks. If you are looking to get high-quality milling capabilities, consider the MIKRON HPM 1350U machine we have for sale. Contact us for more information. Application Types Milling

Year of construction: 2009, condition: ready for operation (used), General Data Machine weight 3000 kg Main Drive Spindle speed range 500 – 32000 rpm Tools Number of station 24 Additional Equipment Environmental conditions: +10 °C to +40 °C, max. humidity 50% at 40 °C, 90% at 20 °C, max. altitude 1000 m a.s.l. Machine lifetime: 20 years General Data Machine weight 3000 kg Main Drive Spindle speed range 500 – 32000 rpm Tools Number of station 24 Additional Equipment Environmental conditions: +10 °C to +40 °C, max. humidity 50% at 40 °C, 90% at 20 °C, max. altitude 1000 m a.s.l. Machine lifetime: 20 years Kfjdpfjx D Rqlex Affja This MIKRON Multistar CX-24/500R was manufactured in 2009. It features a high production capacity with up to 280 pcs/min in multiple cycles and a main motor power of 2.2 kW. The machine accommodates a maximum workpiece diameter of 24 mm with swivel clamp and operates efficiently with a spindle rotation speed up to 32,000 rpm. Ideal for high-volume production environments. Contact us for more information about this machine. Application Types Other Machine Tools