Used Mikron Wf 32 Ch for sale (190)

Condition: used, Year of construction: 1998, operating hours: 15,000 h, functionality: fully functional, machine/vehicle number: 94.98.030, feed length X-axis: 600 mm, feed length Y-axis: 500 mm, feed length Z-axis: 450 mm, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 100 rpm, total height: 2,000 mm, total width: 2,000 mm, total length: 2,800 mm, table width: 520 mm, table length: 900 mm, position of the milling head: mittig, type of input current: three-phase, rotational speed (max.): 6,000 rpm, rotational speed (min.): 100 rpm, table load: 400 kg, overall weight: 3,500 kg, input voltage: 400 V, workpiece weight (max.): 100 kg, input current: 40 A, input frequency: 50 Hz, Equipment: documentation/manual, rotational speed infinitely variable, Good used CNC milling machine with low hours. Used exclusively for repairs and very small production runs. Extensive assortment of tool holders as shown in the photos, including vise, chucks, cutters, plates, and tap holders. Also equipped with a Benz high-speed spindle for wet operation up to 25,000 rpm. TECHNICAL DETAILS Drive power at 44% duty cycle: 15 kW Drive power at 100% duty cycle: 6 kW Max. torque: 50 Nm Machining spindles (vertical and horizontal) Max. spindle torque at 44% duty cycle: 800 Nm Number of gearbox stages: 4 Adjustable speed range (vertical and horizontal): 10 – 6,000 rpm Toolholder / pull stud: SK 40 / DIN 69871 Max. tool weight: 13 kg Tool diameter: 130 mm Automatic travel distances Spindle longitudinal feed (X-axis): 600 mm Spindle transverse feed (Y-axis): 500 mm Spindle vertical feed (Z-axis): 450 mm Feed drives (AC) Programmable feed rate X / Y-axis: 0 – 15,000 mm/min Programmable feed rate Z-axis: 0 – 12,000 mm/min Rapid traverse rate X / Y-axis: 15,000 mm/min Rapid traverse rate Z-axis: 12,000 mm/min Coolant tank capacity: 150 l Flow rate: approx. 20 l/min Clamping table Table size: 520 × 900 mm Number of T-slots: 4 T-slot width: 14 H7 Table load capacity: 400 kg Tool changer TCD 44 Rjdpfxoywn Sis Ahvjbw Tool stations: 22 Tool diameter: 80 / 130 mm Max. tool length: 350 mm Max. tool weight: 6 kg Max. workpiece weight in drum magazine: 200 kg Chip-to-chip time: 20-25 s Tool change time: 12 - 16 s Electrical connection data Total installed nominal power: 15.8 kW Usable and connected load: 12.3 kW Operating voltage and frequency: 3 × 400 V / 50 Hz

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 13 m/min, rapid traverse Y-axis: 13 m/min, rapid traverse Z-axis: 13 m/min, feed length X-axis: 5,000 mm, feed length Y-axis: 5,000 mm, feed length Z-axis: 5,000 mm, spindle speed (max.): 7,500 rpm, VERTICAL MACHINING CENTER MIKRON VCE 750 TRAVELS 760X400X500 Rjdpfeyt Il Hex Ahvobw SPINDLE ISO 40, 7500 RPM TOOL CHANGER WITH 20 POSITIONS

Condition: used, 1 unit 5-axis universal machining center MIKRON HBM 1350 with chip conveyor BÜRENER KFE 63/40-900 Z60, spindle and guideways worn in, self-dismantling required. Color: as shown, according to pictures and inspection. Condition: used. Storage location: production hall. Payment method: advance payment by bank transfer. Shipping: collection only from location in Regensburg. Rjdpfeytqaajx Ahvebw

Condition: good (used), Year of construction: 2000, Travels 1350 x 900 x 750 mm Machine. - Control Heidenhain TNC 426 Rbjdpfx Asi El Iajhvsw Equipment tool changer 46-fold, milling spindle SK 40 12.000 rpm, incl. IKZ system and spool feeder Glass scales, 3D probe Renishaw MP12 Extensive accessories available if required! Please ask if you are interested !

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, 1 x used milling machine Mikron UME 600 Year of manufacture: 1995 Control: TNC 407 X travel: 600 mm Y travel: 500 mm Z travel: 450 mm Speeds: 5 - 5000 rpm Quill stroke: 90 mm Total power requirement: 9 kW Feed range: 0-10,000 mm/min Rjdpoyvh U Uefx Ahvsbw Machine weight approx.: 3260 kg Machine dimensions approx.: 2200x2800x2000 mm Spindle: 6 kW Vertical milling head: SK 40 No internal coolant (WW)

Condition: ready for operation (used), Year of construction: 2001, operating hours: 18,742 h, controller manufacturer: HEIDENHAIN, controller model: TNC 426/430, spindle speed (max.): 18,000 rpm, number of axes: 3, This 3-axis MIKRON VCP 600 vertical machining center was manufactured in 2001. It features a 30-position tool changer, although only 21 positions are currently usable. The high-speed spindle operates at 8,000 rpm due to a slight imbalance. Consider the opportunity to buy this MIKRON VCP 600 vertical machining center. Contact us for more information. • Tool changer: 30 positions; currently 21 usable due to a past collision Rbodpfsx Stk Hox Ahvsw • Spindle: high-speed, 18,000 rpm; slight imbalance, recently limited to 8,000 rpm • Spindle operating hours: 18,742

Condition: ready for operation (used), Year of construction: 2004, operating hours: 5,743 h, controller manufacturer: HEIDENHAIN, controller model: 417, This 3-axis MIKRON VCP 600 was manufactured in 2004. It features a high-performance spindle with speeds up to 20,000 rpm and a robust 30-slot tool changer. The working range is 600 x 450 x 450 mm, supporting a maximum workpiece weight of 500 kg. Ideal for precise machining of metals and alloys, it offers stable construction and efficient cooling. Consider the opportunity to buy this MIKRON VCP 600 vertical machining centre. Contact us for more information. • Maximum workpiece size: 840 x 600 x 500 mm Rodpfx Ahex Imtysvsbw • Maximum workpiece weight: 500 kg • Spindle operating time: 5.743 hours • Tool changer: 30 tools • Positioning accuracy: ±3 µm • tool clamping system HSK 63 • Key features: • Versatile applications: precise machining of a wide range of materials • High-performance spindle for fast, precise machining • Stable, robust construction for high accuracy with heavy workpieces • Automation-ready: integrated features for automated tool and workpiece changes • Efficient cooling system for optimized performance and tool life • Application: Ideal for tool and mold making and the production of high-precision components across various industries Additional equipment • m&h 3D probe • Vise: not included

Condition: ready for operation (used), Year of construction: 2004, operating hours: 22,032 h, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, overall weight: 910 kg, number of axes: 5, This 5-axis MIKRON HSM600U was manufactured in 2004. It features an impressive X-axis travel of 800 mm, Y-axis travel of 600 mm, and Z-axis travel of 500 mm. The machine is equipped with a high-speed spindle capable of reaching up to 36,000 rpm and a tool magazine with a capacity of 60 positions. If you are looking to get high-quality machining capabilities, consider the MIKRON HSM600U vertical machining centre we have for sale. It includes a pallet changer. Contact us for further details. • Tool magazine capacity: 60 positions • Coolant system: Through-spindle coolant (IKZ) • Lubrication: Minimum quantity lubrication (MQL) • Electrical: 400 V, 50/60 Hz, 4 kVA, 5.7 A (full load) • Condition note: Without tools, pallets and vises (available separately) • Program run time: 35,982 h • Spindle hours: 22,032 h Additional equipment • 6-fold pallet changer • Table system: Delphin system (System 3R) • The following materials were processed on the machine • Aluminum • Steel • Non-ferrous metals • Plastics • Hardened steel • The following parts were replaced/repaired: • Several power components until the throttle was replaced • Y-axis cover (2x) • X-axis cover • X-axis ball screw bearings Rbedpfx Ahsyly Scsvsw • Coolant pump motor • Several proximity sensors • 2x Hydraulic pressure sensors • 1x Hydraulic hose • Since the system was a production variant, it was converted to central lubrication • 2x 3R clamping system maintenance kits • Clamping tables included Technical Specification Taper Size HSK 50

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 670 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, total height: 2,790 mm, table load: 1,700 kg, overall weight: 8,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 18,500 W, product length (max.): 3,000 mm, number of axes: 3, This 3-axis MIKRON VCE 1200 PRO was manufactured in 2011, featuring a robust vertical machining centre design. It boasts a table size of 1,220 x 620 mm, capable of handling a maximum weight of 1,700 Kg. Equipped with a spindle speed of 10,000 rpm and a motor power of 18.5 Kw, it ensures efficient machining. Tool capacity stands at 40 positions with a max tool diameter of 75 mm. Contact us for more information about this machine. • X/Y/Z rapid traverse: 30 m/min Rbedpoygw Rrofx Ahvew • Tool stations: 40 positions • Max. tool diameter: 75 mm / 127 mm • Max. tool length: 300 mm Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 1,350 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 750 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 426 M, total height: 3,150 mm, overall weight: 10,100 kg, spindle speed (max.): 24,000 rpm, tool weight: 8,000 g, number of axes: 3, This 3-axis MIKRON VCP 1350 was manufactured in 2000. It features a Heidenhain TNC 426 M control system, X-axis travel of 1350 mm, Y-axis of 900 mm, and Z-axis of 750 mm. The machine supports a maximum workpiece weight of 1,800 kg and includes a high-speed Step-Tec HSK-A63 spindle capable of 24,000 rpm. Ideal for precision machining with a tool magazine capacity of 46 tools. Contact us for more information about this machine. Additional equipment • High-speed precision machining capability Machine Benefits Technical Machine Benefits • Equipped with a automatic spindle orientation and high-speed spindle (24000 rpm) • Coolant system pressure: 30 bar (standard) / 40 bar (optional high pressure) • Tank capacity: 180 l (optional 600 l) • Direct drive ac motor • Measuring system: direct linear scales on all axes • Clamping surface: 1425 x 860 mm • Magazine capacity: 46 tools (standard), 92 tools (optional) • Max. Magazine load: 200 kg • Tool-to-tool change time: approx. 12 sec • Available for inspection Extra Information Rjdpfsyarz Ejx Ahvebw Machine still under power Dimensions Machine Depth 4130 mm

Condition: ready for operation (used), Year of construction: 2006, operating hours: 13,869 h, controller manufacturer: HEIDENHAIN, number of axes: 3, This 3-axis MIKRON VCE 600 Pro was manufactured in 2006. It features a Heidenhain controller and an SK40 spindle mount, with a total of 13,869 spindle hours. If you are looking to get high-quality milling capabilities, consider the MIKRON VCE 600 Pro machine we have for sale. Contact us for more information. • Spindle hours: 13869 Rbjdjx Sz Dnepfx Ahvew Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 1997, controller manufacturer: HEIDENHAIN, controller model: TNC 410/426, tool weight: 12,000 g, This 3-axis MIKRON UM 600 vertical machining center was manufactured in 1997. If you are looking to get high-quality milling capabilities, consider the MIKRON UM 600 machine we have for sale. Contact us for more information. Additional equipment • Noise Emission: Sound power level of 75 dB (A) Machine Benefits Technical Machine Benefits • Ac main spindle drive • Drive power at 40% duty cycle: 9 kw // drive power at 100% duty cycle: 6 kw • Max. Torque at the spindle: 35 nm • Stepless speed control: yes • Tool spindles (fk 40) • Max. Torque at the spindle at 40% duty cycle: 800 nm • Speed range adjustable: 5 - 5000 min⁻¹ • Number of gear stages: 4 • Minimum draw-in force: 100000 n • Minimum ejection force: 3500 n Extra Information Movement Travels in Automatic Mode: Rapid traverse of the clamping fixture (X-axis): 600 mm Rapid traverse of the spindle slide (Z-axis): 500 mm Rapid traverse of the clamping fixture (Z-axis): 450 mm AC Feed Drives Programmable feed rate: mm/min (X, Y-axis), mm/min (Z-axis) Rapid traverse speed: 15 m/min (X, Y-axis), 12 m/min (Z-axis) Feed force at 100% duty cycle: 9000 N (X, Y-axis), 11000 N (Z-axis) Media Coolant System Rbodpjx D Id Aofx Ahvjw Capacity: 150 liters Flow rate: approx. 30 l/min at 2.2 bar

Condition: ready for operation (used), Year of construction: 1998, operating hours: 14,157 h, travel distance X-axis: 1,016 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 653 mm, controller manufacturer: SIEMENS, number of axes: 3, This 3-axis MIKRON VF 3 vertical machining center was manufactured in 1998. It features a table size of 460 × 1,220 mm, with X-axis travel of 1,016 mm, Y-axis travel of 508 mm, and Z-axis travel of 653 mm. If you are looking to get high-quality milling capabilities, consider the MIKRON VF 3 machine we have for sale. Contact us for more information. Rodpfxsych Srj Ahvobw • Table size: 460 × 1,220 mm

Condition: ready for operation (used), Year of construction: 1995, operating hours: 9,031 h, spindle speed (max.): 5,000 rpm, overall weight: 3,200 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 407, spindle motor power: 9,000 W, number of axes: 3, This 3-axis MIKRON UME600 was manufactured in 1995. It features a maximum spindle speed of 5,000 rpm and a feed rate of up to 10,000 mm/min. The table size is approximately 900 × 530 mm, providing ample workspace for various machining tasks. If you are looking to get high-quality milling capabilities, consider the MIKRON UME600 vertical machining centre we have for sale. Contact us for further details. • Feed rate: max. 10,000 mm/min • Table size: approx. 900 × 530 mm • Automatic tool changer: none • Condition: Used, good overall condition; fully functional and ready for operation • Machine hours: 11,643 h • Spindle hours: 9,031 h Rbsdpfx Aoyll Szohvow Additional equipment • Coolant pump • Machine vise • 3D touch probe • Various collet sets / SK40 tool holders • Tool cabinet with worktop and bench vise • Additional accessories by arrangement Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, overall weight: 9,100 kg, spindle speed (max.): 20,000 rpm, spindle motor power: 12,000 W, number of axes: 3, This 3-axis MIKRON VCP 800W Duro was manufactured in 2004. It features a Heidenhain iTNC 530 control system, with X, Y, Z travels of 800 mm, 650 mm, and 500 mm respectively. The machine includes a high-velocity spindle capable of 20,000 rpm and a 30-position tool magazine. Ideal for precision machining, consider the opportunity to buy this MIKRON VCP 800W Duro vertical machining centre. Contact us for more information about this machine. • Tool interface: HSK-A63 • Tool magazine: 30 positions Additional equipment • Chip conveyor • Complete set of tool holders and tools (as shown in photos) Rbodsyglh Eepfx Ahvsw • BILZ ThermoGrip shrink-fit system with CoolDown (induction device for mounting/dismounting tools in shrink-fit holders; manufacturer: BILZ)

Condition: ready for operation (used), Year of construction: 2001, operating hours: 6,707 h, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 653 mm, controller manufacturer: SIEMENS, number of axes: 3, This 3-axis MIKRON VCE 750 was manufactured in 2001. It features a table size of 914 × 356 mm, with X-axis travel of 762 mm, Y-axis travel of 406 mm, and Z-axis travel of 653 mm. If you are looking to get high-quality milling capabilities, consider the MIKRON VCE 750 machine we have for sale. Contact us for further details regarding this machine. Rbedpfx Aheych Rnovsw • Table size: 914 × 356 mm

Condition: used, Year of construction: 1995, Technical details: x-travel: 600 mm y-travel: 500 mm z-travel: 450 mm Rbodpfow D Hhpsx Ahvjw weight of the machine ca.: 3,5 t

Condition: excellent (used), Year of construction: 2010, Specifications: Travel XYZ: 1020 x 560 x 600 mm Table size: 1000 x 560 mm Spindle taper: SK40 Spindle speeds: 15,000 rpm Tool changer: 30 positions Control: HEIDENHAIN iTNC-530 3D measuring probe Chip conveyor Rbsdpfjyuiu Esx Ahvew Machine powered on

Condition: used, Year of construction: 2007, Article: Transfer machine Manufacturer: Mikron Type: Multistep XS Yob: 2007 Number of modules: 4 (1 loading module, 3 process modules) Rbsdpfxjyplvhe Ahvsw Number of spindles: 6 Rotational speed : 15.000 rpm Control: Bosch Rexroth MTX Coolant unit: Knoll VRF450/2100 Extraction: Elektrostat / LTA 3D tool path correction 5/6-axis transfórmation Machine dimensions: 9.300 mm x 3.400 mm x 3.500 mm Wight per processing module: 4,5 t Wight per loading module: 2,5 t Clamping force: 10 kN Workpiece cange chip-to-chip time: 6s Workpiece: Diameter: 140 mm, Length: 180 mm, Weight: 21 kg Tool changer: Tools (2 discs with 12 positions) / processing module: 22 Weight of tool disc: 5 kg Max. tool weight: 2,5 kg Max. free tool length: 186 mm Max. tool diameter: 63 mm Max. tool diameter with free position: 105 mm Shortest chip-to-chip time:

Condition: good (used), Year of construction: 2012, Traverse X Y Z; 1020 x 560 x 600mm, table size 1000 x 560mm, table load 1350kgs, spindle speed 16000 rpm, spindle motor 12Kw, rapid federate 40m/min, 24 station ATC, spindle taper BT40, Heidenhain TNC 530I, swarf conveyor. Rjdpfxeypb Dzs Ahvsbw

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 530 i, rotational speed (max.): 10,000 rpm, number of slots in tool magazine: 24, MIKRON VCE600PRO machining center with 3+2 axes (on table) X travel 600 Y 450 Z 540 mm, SK40 with 10,000 rpm and ATC 24 tools. Excellent condition. Rodeqi Ufxepfx Ahvsbw

Condition: used, Year of construction: 2005, travel distance X-axis: 1,020 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain iTNC 530, total height: 2,770 mm, total length: 3,300 mm, total width: 2,687 mm, The Micron VCE 1000 Pro is a powerful and precise CNC machining center designed for demanding milling tasks. With travel distances of 1020 x 560 x 600 mm, it enables flexible machining of medium-sized workpieces. The machine is equipped with a Heidenhain iTNC 530 control, an ISO 40 tool taper, and a spindle speed of up to 10,000 rpm, making it ideal for high-precision, high-speed machining. Rodpfx Ahexyig Revobw The robust table with a 1000 x 560 mm T-slot area supports workpieces up to 1,350 kg. Fitted with a chip conveyor, coolant pump, and a 18.5 kW motor, the VCE 1000 Pro offers a reliable combination of power and precision.

Condition: good (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, CNC control Heidenhain iTNC530 NC swivel-rotary table (B-axis and C-axis) pallet changing device with 7 places 300mm x 300mm 30-fold automatic tool changer electronical hand wheel coolant through spindle device (IKZ) chip conveyor coolant device Technische Daten / technical details: Verfahrweg X / X-Travel 600 mm Verfahrweg Y / Y-Travel 450 mm Verfahrweg Z / Z-Travel 450 mm B-Achse Schwenktisch / B-axis swivel table -115 / +30 ° C-Achse Rundtisch / C-axis rotary table 360 ° Tischgröße / table size 300 x 300 mm Rjdpfjvmqkusx Ahvsbw Werkzeugschaft / spindle taper HSK 63 Drehzahlbereich / spindle speed 20-20000 UpM /rpm Werkzeugwechsler / tool changer 30 fach /fold Gewicht der Maschine ca. / weight ca. 7700 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: good (used), Year of construction: 1997, travel distance X-axis: 1,000 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 750 mm, CNC control Heidenhain TNC426 30-fold tool changer electronical handwheel chip screw coolant device Technische Daten / technical details: Verfahrweg X / X-Travel 1000 mm Verfahrweg Y / Y-Travel 750 mm Verfahrweg Z / Z-Travel 750 mm Tischgröße / table size 1150x700 mm Werkzeugschaft / spindle taper SK40 Drehzahlbereich / spindle speed 12000 UpM /rpm Anzahl der Werkzeugplätze / tool places in ATC 30 Gewicht der Maschine ca. / weight ca. 10500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. Rbjdpfxoua S Hrj Ahvow

Condition: used, Year of construction: 2017, Milling machines Travel distance X: 400 mm Travel distance Y :450 mm Travel distance Z: 350 mm HSC-machines Number of axis: 5 milling machine / machining center Control: Heidenhain iTNC 530 HSCI spindle chuck: HSK-40 spindle revolutions: 42000 rpm Speed range to: 42000 U/min table size X: 400 mm table size Y: 400 mm max. workpiece weight: 100 kg tool changer: 68 - time input Power : 20 kW Torque: 30 Nm Rapid traverse: 50 m/min feed rate: 50000 mm/min spindle cooling chip conveyor control Heidenhain 5-axis CNC machining center designed for graphite machining Heidenhain iTNC 530 HSCI control Rsdpfsym Rr Aox Ahvsbw 68-position tool changer HSK-40 high-speed spindle spindle speed up to 42,000 rpm KNOLL oil filtration system KF 400 / FKA 620 KNOLL chip conveyor ideal for electrode production high surface quality in finishing