Used Mikron Wf 3 Sa for sale (183)

Year of construction: 1990, condition: excellent (used), Mikron WF2S tool milling machine with 3-axis Elesta-Visulesta digital display. Rigid angle table , SK 40 spindle mount. Very good working condition , from institute. Machine ready for demonstration under power by arrangement. Laodpfx Ajg Nw Rzeb Ush

Condition: used, machine/vehicle number: 152.00.80.20, Universal machining center, CNC tool milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine -function tested -Clamping table: 800 x 445 mm -Travel: X/Y/Z 500/500/385 mm -Spindle holder: SK40 -quill stroke: 90 mm -Speeds from: 31.5 to 3150 rpm -Coolant device Lodpfofbma Nex Ab Uoah -Dimensions: 1475/1770/H2000 mm -Weight: 1966 kg

Condition: good (used), Mikron WF31D Precision milling and drilling machine Machine with chip and splash guard cabin Equipped with a Heidenhain TNC355 control system Technical specification The WF 31 D is a precision milling and drilling machine for series production and CNC training. Lodpfxewiucfj Ab Usah Driven by an automatically shiftable stepped gearbox and Poly-V-belt. Vertical spindle can be extended by 90 mm; changeover from vertical to horizontal machining possible. Recirculating ball screws with DC drives enable simultaneous feed movements. Guides are protected against dust, chips and coolant. Technical data Manufacturer: Mikron Type WF31D Control: Heidenhain TNC 355 Longitudinal movement (X): 560 mm Transverse movement (Y): 500 mm Vertical movement (Z): 400 mm. Drive power: 3.3/4.0 kW Speed range: 40-4000 rpm. Feed speed: 2-3000 mm/min Rapid traverse speed X/Y: 6000 mm/min, Z: 5000 mm/min. Electrical equipment Total installed rated power: 10.0 kW installed effective power: 7.3 kW. Operating voltage: 3 x 380 V - 50/60 Hz Protection class: IP 54. Max. permissible ambient temperature: +35 °C Relative humidity: 75 %. Dimensions and weights Width 2450mm Length 2800mm Height 2000mm Net weight of the machine: approx. 2570 kg. Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: good (used), Mikron milling machine WF2/35 - Width: 120 cm - Depth: 140 cm Lasdpfxsum Rpyo Ab Ueh - Height: 180 cm Good condition, fully functional, can be viewed and tested on site. Shipping also abroad. Inspection : Basically, I would like to point out that the item can be inspected and tested under power before purchase to avoid misunderstandings. Please ask questions before buying to avoid any ambiguities. For general questions or to make an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale reserved. VAT is shown separately on my invoices. Shipping with forwarding agent.

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: SN 152.07.80.8XX, Ladies and Gentlemen, we are selling our Mikron milling machine, with the Heidenhain TNC 355 control, the machine is technically and optically in very good condition. Lsdpfjura Eujx Ab Ujah The machine can be inspected at our premises.

Condition: used, Year of construction: 2012, x-travel 1.600 mm y-travel 900 mm z-travel 800 mm Control Heidenhein iTNC 530 Lsdpfx Abevtgr Ie Usah table-size 1.700x850 mm taper ISO ISO 40 turning speeds 10.000 U/min workpiece Random 30 pos. table weight 2.000 Kg rapid traverse: 20 m/min Internal cooling system 20 bar total power requirement 18 kW weight of the machine ca. 18.600 kg -Maschinenstunden 47.256 h -Spindelstunden 9.362 h

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 540 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 20 m/min, total height: 2,720 mm, total length: 3,160 mm, total width: 2,240 mm, For sale: 3-axis CNC milling machine, Mikron VCE 600 Pro Ledexnprvspfx Ab Ueah The machine is in excellent condition and ready for immediate use. Technical data: Year of manufacture: 2012 Control: Heidenhain ITNC 530 Operating hours: 22,840 Spindle hours: 10,902 X-axis travel: 600 mm Y-axis travel: 500 mm Z-axis travel: 540 mm Max. spindle speed: 10,000 rpm Tool holder: SK40 Tool magazine: Clamping surface: 700 x 500 mm Dimensions: 3,160 x 2,240 x 2,720 mm Weight: 4,800 kg Included in the offer: Chip conveyor, interior extraction, through-spindle coolant system, handwheel control, coolant gun, 3D probe, Renishaw tool measurement system Not included: Clamping devices, tool holders Transport and loading can be organised across Europe at additional cost upon request. Prices are quoted net plus VAT. Inspection possible by appointment. Please contact us – our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale BUY / SELL PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact details, please visit our website.

Condition: not inspected (used), Year of construction: 1997, functionality: unexamined, machine/vehicle number: 5.45.25.06, No minimum price – guaranteed sale to the highest bidder! Payment deadline for the machine is 20/11/2025! Placing a bid obligates you to timely collection between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS Travel distances: Travel X: 900 mm Travel Y: 630 mm Travel Z: 500 mm Spindle speed range, vertical and horizontal: 5–5,000 rpm Tool holder: SK 40/DIN 69871 Tool weight: max. 12 kg Tool diameter: max. 200 mm Clamping surface of the angle table: 1,200 x 600 mm Max. workpiece weight: 500 kg MACHINE DETAILS Control system: HEIDENHAIN TNC 407 Dimensions (L x W x H): 3,500 x 2,900 x 2,200 mm Weight: 4,100 kg Coolant tank capacity: 150 l EQUIPMENT Technical documentation Note: Transport by standard truck. Laodpfoxnk Hbjx Ab Uoh

Condition: ready for operation (used), Year of construction: 2009, General Data Measurements width 2300 mm Measurements depth 5100 mm Measurements height 3090 mm Machine weight 12600 kg Control Unit Brand HEIDENHAIN Model i TNC 530 Main Drive Spindle speed range 15000 Spindle motor power HSK-A 63 Number of axis 5 Movement X-Axis Movement 1350 mm Y-Axis Movement 1150 mm Z-Axis Movement 700 mm A-Axis Movement 136° (-16 +120) Table Table load 1600 kg Additional Equipment A.P. cooling through spindle Chip evacuation Tool control with Dual Laser Radio frequency touch probe Air through spindle APS (Advanced Process System) Laodpfx Aoxfww Ijb Uoh ITC (Intelligent Thermal Control) This 5-axis MIKRON HPM 1350U was manufactured in 2009. A universal machining centre, it offers advanced capabilities for diverse and complex machining tasks. If you are looking to get high-quality milling capabilities, consider the MIKRON HPM 1350U machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2005, x-travel 400 mm y-travel 450 mm Lajdpfx Asxfb E Aob Ujh z-travel 350 mm Control Heidenhein iTNC 530 68 fach tool adaptor HSK 40E turning speeds 30.000 U/min fixed table - dimensions 300 x 400 mm mm workpiece weight 200 kg pallet table size 320 x 320 mm feed speeds autom. x/y/z 40 m/min. spindle drive motor 13 kW total power requirement 16 kW weight of the machine ca. 7.500 kg High-speed 3-axis universal machining center with 7-station pallet changer. Operating hours: 44,899 hours. Load hours: 32,369 hours. Spindle time since replacement: 13,350 hours. Gantry-style machine with a solid monoblock polymer concrete construction, compact linear ball bearings, Heidenhain direct measuring system, hydraulic power unit for tool and pallet clamping, and digital drives with liquid-cooled Siemens AC servo motors. Accessories: 1 BURN refrigeration unit, 1 Keller L-Cut extraction system (built in 2012), PS 32 setup button, and tool blow-off device. Machine dealer with own stock of 1600 m².

Condition: ready for operation (used), Year of construction: 2008, operating hours: 3,825 h, functionality: fully functional, machine/vehicle number: 214.84.70.265, MIKRON HSM 400 U from 2008, very few operating hours Laodpfoxg Rvyjx Ab Ujh

Condition: used, Year of construction: 2007, x-travel 1.350 mm y-travel 1.150 mm z-travel 895 mm table diameter 4.590 x 6.990 x 3.150 mmmm Ledpfx Aoxddtteb Ujah handwheel el. tool adaptor HSK-A63 turning speeds 24.000 U/min engine output 38 kW table weight 1.600 Kg 92 fach Control HEIDENHAIN iTNC 530 a-axis A +16/-120 c-axis 360 ° weight of the machine ca. 14.000 kg dimensions of the machine ca. 4.590 x 6.990 x 3.150 mm

Condition: used, Year of construction: 2016, operating hours: 3,000 h, functionality: fully functional, machine/vehicle number: 107.37.00.616, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Heidenhain, controller model: iTNC 530, rotary table diameter: 450 mm, rotational speed (min.): 140 rpm, overall weight: 7,700 kg, spindle speed (min.): 100 rpm, spindle speed (max.): 20,000 rpm, operating hours of spindle: 3,000 h, coolant supply: 70 bar, spindle motor power: 3,700 W, spindle nose: HSK63, number of spindles: 1, number of slots in tool magazine: 120, tool length: 270 mm, tool diameter: 80 mm, tool weight: 6 g, type of input current: three-phase, Equipment: chip conveyor, Excellent condition machine fully maintained by GF all the time we have owned it. -Machine came out of Renault F1 when 3 years old and we bought it from GF UK after a full service and checks with 12-month warranty. We have maintained it with GF ever since Brand New Spindle fitted less than a year ago. 2800 hours only We also had a new Rotary table fitted at a cost of £50k three years ago HEIDENHAIN iTNC 530 with Ethernet X-Axis (600 mm) Y-Axis (450 mm) Lsdpfx Abow S Nf Ee Ueah Z-Axis (450 mm) Max Workpiece Size: (450mm) Dia x (450mm) height x (150kg) B-Axis (Tilt) -120 / +45 degrees C-Axis (Rotary) x 360 degrees FEED DRIVE Drive: Ball screws in X, Y, Z-axis Drive: Direct Drive Torque Motors in B and C-axis Rapid Traverse X/Y/Z (22 m/min) Table Rapid Speed B-Axis (Tilt)50 rpm Table Rapid Speed C-Axis (Rotary)140 rpm Maximum Acceleration X/Y/Z up to 5 m/sec2 DIRECT DRIVE TORQUE MOTOR RTT (ROTARY TILT TABLE) DYNAFIX System 3R Dynafix with 7 x pallet stations (350 x 350 mm) maximum pallet size possible Maximum workpiece weight (150 kg) With hydraulic clamping in turning and swivelling axis All feed motors are liquid-cooled 120 POSITION TOOL TOWER Number of magazine places - 120 positions Spindle taper - HSK-A63 Maximum tool diameter (80 mm) Maximum tool diameter with unoccupied adjacent positions. (125 mm) Maximum tool length (270 mm) Maximum permitted tool weight (6 kg) Number of pockets for tool length up to (270 mm)70 Number of pockets for tool length up to (160 mm)50 WEIGHT Including pallet changer - Approximately (7,700 kg) Machine base - Polymer concrete (man-made granite) STEP-TEC SWISS MADE SPINDLE Spindle taper-HSK-A63 Spindle RPM- 100-20,000 rpm Spindle power - 40 HP (38 kW) Spindle torque 40% ED - 67 Ft/Lb (91 Nm) Maximum tool diameter - (80 mm) Maximum tool length from the spindle nose (350 mm) Maximum tool weight- (6 kg) EQUIPPED WITH: (600 l) band filter coolant tank with micro paper filtration system -18-80 bar (261-1,160 PSI) adjustable high-pressure Coolant Thru Spindle (CTS) -Flow rate 5.3 gallon/min (20 l/min). Unit is a KNOLL KF400|FKA/600 Litre Lift up scraper chip conveyor for aluminium machining M&H Infrared touch probe BLUM laser tool measuring system Tool blow-off unit Blow-off unit for laser measuring system Tilting the working plane: This option activates the optional HEIDENHAIN software cycle 19 “APS” Option (Advance Process System) “ITC” Option (Intelligent Thermal Control) “ITC-5X” Option (Intelligent Thermal Control for 5 axis) External spindle chiller

Condition: not inspected (used), Year of construction: 2001, operating hours: 3,260 h, functionality: unexamined, machine/vehicle number: 730, travel distance X-axis: 1,350 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 685 mm, workpiece weight (max.): 1,500 kg, spindle speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20.11.2025! Bidding obligates the buyer to collect the machine within the specified period from 01.12.2025 to 05.12.2025! TECHNICAL DETAILS Travel distances Travel X: 1,350 mm Travel Y: 1,150 mm Travel Z (vertical): 685 mm Travel Z (horizontal): 870 mm Spindle Working spindle speed: 0 – 12,000 rpm Acceleration time: approx. 2.5 s Tool holder: HSK-A63 Tool data Tool magazine: 46-position changer Number of magazine positions: 46 Max. tool diameter (all positions): 80 mm Max. tool diameter (some positions): 130 mm Max. tool weight: 8 kg Max. tool length: 300 mm Max. magazine load: 200 kg Chip-to-chip time: approx. 9–12 sec, tool-to-tool Feed rates and rapid traverse Rapid traverse X, Y, Z: 30 m/min Table NC rotary table diameter: 1,100 mm Clamping surface: Ø 1,100 x 1,000 mm Table load capacity: 1,500 kg Centering bore: Ø 50H6 Table height above floor: approx. 1,120 mm Swivel axis (A-axis): +15° to -120° Control system: HEIDENHAIN TNC 426 MACHINE DETAILS Spindle hours: 3,260 h Machine on-time: 82,797 h Dimensions & weight Machine weight: approx. 12,000 kg Required space (L x W x H): 4,130 x 3,680 x 3,150 mm EQUIPMENT Ljdpfx Aboxm Tx De Usah RENISHAW OMP60 probe Technical documentation Note: Transport will likely be arranged via truck with a loading width of 3,000 mm.

Condition: good (used), Year of construction: 2002, functionality: fully functional, feed length X-axis: 400 mm, feed length Y-axis: 240 mm, feed length Z-axis: 350 mm, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 40 m/min, spindle speed (max.): 30,000 rpm, Mikron HSM 400U 5-Axis CNC (Graphite Mill) Year:2002 S/N: 107.87.00.024 Control: Heidenhain iTNC530 Spindle Taper: HSK-E40 Spindle Speed: 30,000 RPM Spindle Power: 13 kW (17 HP) ATC: 36-Station Automatic Tool Changer Lsdpfx Asw H Izpsb Usah Travels: X: 15.723″ (400 mm) Y: 9.434″ (240 mm) Z: 13.758″ (350 mm) A-Axis: ±110° C-Axis: 360° / 0.001° Tooling System: System 3R Tooling Base (on Trunnion) 48-Station System 3R Tooling Carrousel Blum Laser Tool Measurement System Rapid Traverse Rate: 40 m/min (1,575 IPM) Repeatability: ±0.002 mm Max Workpiece Capacity: Ø230 mm × 350 mm Height Max Load: 25 kg Structure: Polymer Concrete Frame Cooling System: Full Liquid Cooling Machine Dimensions (L×W×H): 3,840 × 2,540 × 2,640 mm Weight: 6,700 kg

Condition: used, Year of construction: 1995, Technical details: Ljdpfxew D Hhpe Ab Ueah x-travel: 600 mm y-travel: 500 mm z-travel: 450 mm weight of the machine ca.: 3,5 t

Year of construction: 1995, condition: ready for operation (used), Travel X/Y/Z: 560mm/500mm/400mm, speed: 5000rpm, table dimensions X/Y: 900mm/530mm, feed rate: 8m/min, rapid traverse: 10m/min, tool stations: 22, tool holder: SK40. Machine dimensions X/Y/Z: approx. 3950mm/2650mm/2150mm, weight: approx. 3000kg, control: Heidenhain TNC 407/415, operating hours: 29647h. The central lubrication system shows issues. Documentation available. An on-site inspection is possible. Laodow H At Hjpfx Ab Ujh

Condition: good (used), Year of construction: 2016, Traverses XYZ: 800 x 800 x 550mm, 500 x 500mm table, A axis -91 / + 121 degrees, C axis , 360 degrees, Heidenhain TNC530, Spindle Speed 20000rpm, 36kW Spindle Motor, HSK A63 Spindle Taper, 60 tools, swarf conveyor. Ljdpfx Abowq A Rgs Ujah

Condition: used, Safety switch, safety switch, protective grid switch -Manufacturer: Euchner, safety switch Safety Switch from CNC milling machine Mikron UME 600 -Type: TZ2LEO24M .: 090559 -Technical data: see photo of nameplate -Dimension: 170/110/40 mm -Weight: 1.1 kg Laodpfxerb E E Ee Ab Ush

Condition: used, Year of construction: 1998, x-travel 710 mm y-travel 630 mm z-travel 500 mm table surface area 1100 x 585 mm rotary table dia. 500 mm Lasdpfx Abstz Sqhe Uoh spindle taper SK 40 spindle turning speed range 5 - 6300 U/min spindle power 11 kW no. of tools in magazin 2 x 22 control HEIDENHAIN, TNC 426 total power requirement 20 kW weight of the machine ca. 5,8 t Accessories: various tool holders, probe RENISHAW OMP 60, coolant

Condition: used, Year of construction: 2008, x-travel 1.850 mm y-travel 1.400 mm z-travel 720/905 mm Control SIEMENS SL 840 D spindle turning speed range 15.000 U/min B - axis -20 / +120 ° Tool bore HSK-A63 0 tool magacine with 45 Plätzen tool length - max. 365 mm workpiece diameter at used places besides 90 mm tool diameter with 2 vacant positions 130 mm Ledpjvxwuwsfx Ab Usah NC rotary table 1.600 mm T-slots 12 groove width 18H12 flute distance 100 mm table load capacity 3.000 KG Table speed max. 30 1/min total power requirement 89 kW weight of the machine ca. 26 t dimensions of the machine ca. 7,00 x 6,20 x 4,15 m 5-Axis machining center with Siemens SINUMERIK 840D control, BLUM Laser, Renishaw, RotoClear, Fire extinguishing system, 2x electronic handwheel, Steptec spindle, Spindle oil cooler, coolant through the spindle, High pressure pump, Bürener belt filter system, Chip conveyor. Machine can be inspected under power

Condition: used, Main spindle with drive motor, universal milling head, milling holder, milling extension, angle milling head, upper support, upper slide, dovetail guide, tool slide, cross table -Manufacturer: Mikron, upper support tool slide from CNC milling machine Mikron UME 600 -Motor: Siemens 380V 3.7/5.25 kW see photo nameplate -Speed: 1500/9000 rpm -Spindle head: SK40 mount -Dimensions: 1550/560/H735 mm -Weight: 555 kg Ledpforc Ik Hsx Ab Usah

Condition: used, PLC control, power module, LT module, E/R module, regenerative module, CNC control, safety slot universal module, plug-in cards, printed circuit boards, control card, circuit board -Manufacturer: Mattle Mikron, safety insert universal module board from CNC milling machine Mikron UME 600 -Safety module: Type SEMU TN 24VDC -Board: Mikron 958 74 10 275 S300 -Dimensions: 300/170/H200 mm Lsdpfxsrb E Ews Ab Usah -Weight: 1.4 kg

Condition: like new (used), functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC530, spindle speed (max.): 36,000 rpm, operating hours of spindle: 4,651 h, spindle nose: HSK 50, number of spindles: 15, Equipment: CE marking, documentation/manual, VERTICAL MACHINING CENTER MIKRON MODEL HSM 800 X-AXIS TRAVEL 800 mm Y-AXIS TRAVEL 600 mm Z-AXIS TRAVEL 500 mm SPINDLE HSK E 50 SPINDLE SPEED 36,000 RPM WORKPIECE PROBE LASER MEASUREMENT SYSTEM OPERATION AND MAINTENANCE MANUALS CE CERTIFICATION Laodpow U T Szsfx Ab Uoh CNC HEIDENHAIN iTNC 530 REMOTE HANDWHEEL SIEMENS MOTORS AND DRIVES HEIDENHAIN LINEAR GLASS SCALE MEASURING SYSTEM TOTAL OPERATING HOURS: 6447 SPINDLE HOURS: 4651

Year of construction: 1997, condition: used, Price: On request - Drive system: CNC - Power [kW]: 22.0 - Number of axes [pcs]: 3 - X-axis travel [mm]: 1000 - Y-axis travel [mm]: 750 Laedpfownh Hhex Ab Ush - Z-axis travel [mm]: 750 - Tool holder: ISO40 - Max. spindle speed [rpm]: 12000 - Year: 1997 - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum