Used Mikron Vce 600 Pro for sale (190)

Condition: ready for operation (used), Speed: 3150 rpm, travel X/Y/Z: 710mm/500mm/500mm, number of spindle speeds: 21, feed: 2000mm/min, spindle mount: ISO40/M16, milling head table height: 559mm, table dimensions X/Y: 500mm/1000mm, T-slot spacing: 63mm, max. workpiece weight: approx. 500kg. Dimensions X/Y/Z: approx. 2700mm/2300mm/2200mm, weight: approx. 3300kg, control: Heidenhain TNC 155, documentation available. Laodpfx Aetuwk Usffjk

Condition: good (used), Year of construction: 1995, Machine is in good working condition. Control unit TNC 426 Lasdpfx Ajuzimneffjk

Condition: used, Year of construction: 1985, max. wheel diameter 80 mm gear width 150 mm max. module 2,5 min. module total power requirement 10 kW weight of the machine ca. 2400 kg M I K R O N (Switzerland) Fully Automatic Gear Hobber for Worm Gears Model A 33 / 1 Year 1985 Ser.-No. 14.06/14.07/14.15 _____ max. gear- without feed magazine approx. 80 mm max. gear- with feed magazine approx. 50 mm Module max. 2, / 2,5 Axial milling length approx. 150 mm max. workpiece-mounting length approx. 200 mm Milling slide can be swivelled up to 90 degrees Milling cutter - 24 - 50/63 mm Max. radial distance of milling slide 0-14/18 mm Milling cutter adjustment max. 25 mm Milling cutter speed 212 - 2.000 rpm Axial feed range infinitely adjustable 0,05 - 4,0 mm/workpiece rotation radial infinitely adjustable 0,2 - 200 mm/min. Lsdpfxst Hw D Re Affsak Milling spindle drive 3 kW Total electrical load approx. 10 kW - 50 Hz - 380 Volt Weight approx. 2.400 kg Accessories/Special Features: " Fully automatic operation cycle and minimum idle times due to programmable SIEMENS Program Controls S 5 for all machining steps i.e. rapid gear, feed, milling cutter on/off for the loading device, tailstock, possibly shifting, etc. with unit counter, program numbering including 30 different numeric error displays Pneumatic workpiece-loading and unloading facility parallel to work piece axis upright for rod workpieces approx. 140 mm long x 8 mm , including pneumatic double gripper for loading and unloading of work pieces. Raw parts are inserted into change cassettes externally and then placed into the loading device. The double gripper places the parts between workpiece spindle and tailstock, the tailstock spindle sleeve pushes the parts in the main spindle collet and clamps them simultaneously. The finished parts are ejected from the main spindle, then placed back again into the finished parts cassette by the gripper. The whole process is electrically monitored and checked. The complete loading facility is encased by plexiglass. " Hydraulic work piece clamping device including collets and hydraulic ejector " separate cooling system with magnetic separator * separate hydraulic system * various change gears This machine is set up for worm gears/armature shafts that can be used for adjustable car seats, window lifters, etc.

Condition: ready for operation (used), Sell due to new acquisition good condition Mikron VC 1000 milling machine Lsdoh Tnpxjpfx Affoak

Condition: ready for operation (used), Year of construction: 2007, operating hours: 29,655 h, functionality: fully functional, machine/vehicle number: 73.110, travel distance X-axis: 1,350 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 700 mm, table width: 1,100 mm, table load: 1,600 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 92, swivel angle A-axis (min.): -120 °, swivel angle A-axis (max.): 16 °, Insolvency auction - all machines functional and ready for demonstration. Property of a German GmbH TECHNICAL DETAILS X-axis (longitudinal): 1,350 mm Y-axis (transverse): 1,150 mm Z-axis (vertical): 700 mm A-axis: +16° / -120° C-axis: n x 360° Simultaneously controllable axes: 5 axes Control: Heidenhain iTNC 530 Spindle speed: 12,000 rpm Tool magazine: 92 slots Feeds and travel speeds X and Y axis: 15 / 30 m/min Z axis: 15 / 30 m/min A axis: 11 / 20 rpm C axis: 40 rpm Work table Clamping surface: Ø 1,100 mm Max. workpiece weight: 1,600 kg MACHINE DETAILS Machine: 12,600 kg Dimensions: 4,650 x 3,030 x 3,300 mm Connected load: 75 kW Operating voltage: 400 V, 50 Hz Noise protection level: 68 dB(A) Program run: 34,205 h Spindle hours: 29,655 h Lodsvxr I Eepfx Affjak EQUIPMENT - without magnetic table

Condition: good (used), Mikron WF 32 CH Universal milling machine Machine with chip and splash guard cabin Equipped with a Heidenhain TNC355 control system Technical specifications Manufacturer: Mikron Type: WF 32 CH Control: Heidenhain TNC355 Travels: X 560 mm Y 500 mm Z 400 mm Clamping surface: 530 x 900 mm Rapid traverse: X, Y 6,000 mm/min, Z 5,000 mm/min Spindle speed: 20 - 6,300 rpm Laodpfx Ajwit Rhsffsk Dimensions: 2,700 x 2,000 x 2,400 mm Weight: 2,400 kg You can find more items - new and used - in our store! International shipping costs on request!

Year of construction: 1995, condition: ready for operation (used), Travel X/Y/Z: 560mm/500mm/400mm, speed: 5000rpm, table dimensions X/Y: 900mm/530mm, feed rate: 8m/min, rapid traverse: 10m/min, tool stations: 22, tool holder: SK40. Machine dimensions X/Y/Z: approx. 3950mm/2650mm/2150mm, weight: approx. 3000kg, control: Heidenhain TNC 407/415, operating hours: 29647h. The central lubrication system shows issues. Documentation available. An on-site inspection is possible. Laodew H At Hepfx Affsk

Condition: used, Transformer, transformer, converter, three-phase autotransformer, three-phase transformer Ledskzpm Hjpfx Affjak -Manufacturer: LAPP, three-phase transformer from CNC milling machine Mikron WF 51C/155 -Type: DT -Power: 300VA -Primary: 3x380V -Technical data: see photo identification plate -Dimensions: 150/90/H150 mm -Weight: 5.7 kg

Condition: used, Year of construction: 1982, x-travel 400 mm y-travel 400 mm z-travel 380 mm total power requirement 2,6 kW weight of the machine ca. 1,5t t Lodpfx Aou U Sabsffeak

Condition: good (used), Year of construction: 1990, 1 used universal tool milling machine Lajdjrywgzopfx Affok made by Mikron type WF 2 SA year 1990 with Heidenhain active digital readout TNC 114 Stepless feed Lamp Coolant device Travel X / Y / Z 420 / 250 / 345 mm Speed 50 - 2240 rpm Clamping surface 635 x 250 mm Feed in 3 axes 0 - 750 mm/min Rapid traverse in 3 axes 1400 mm/min Holder ISO 40 Vertical / horizontal quill extendable Dimensions approx. 1.2 x 1.2 x 1.6 m Weight approx. 1200 kg

Condition: ready for operation (used), Year of construction: 2006, operating hours: 21,967 h, functionality: fully functional, machine/vehicle number: 84.34, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 700 mm, table width: 1,000 mm, table load: 1,100 kg, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 46, swivel angle A-axis (min.): -120 °, swivel angle A-axis (max.): 16 °, Insolvency auction - all machines functional and ready for demonstration. Property of a German GmbH TECHNICAL DETAILS X-axis (longitudinal): 1,000 mm Y-axis (transverse): 1,150 mm Z-axis (vertical): 700 mm A-axis: +16° / -120° C-axis: n x 360° Simultaneously controllable axes: 5 axes Control: Heidenhain iTNC 530 Spindle speed: 15,000 rpm Tool magazine: 46 slots Feeds and travel speeds X and Y axis: 15 / 30 m/min Laodpfx Afevxr Ilsfjk Z axis: 15 / 30 m/min A axis: 11 / 20 rpm C axis: 40 rpm Work table Clamping surface: Ø 1,000 mm Max. workpiece weight: 1,100 kg MACHINE DETAILS Machine: 12,300 kg Dimensions: 4,600 x 3,030 x 3,300 mm Connected load: 75 kW Operating voltage: 400 V, 50 Hz Noise protection level: 68 dB(A) Program run: 40,095 h Spindle hours: 21,967 h EQUIPMENT - without magnetic table

Condition: used, Year of construction: 2008, x-travel 1.850 mm y-travel 1.400 mm z-travel 720/905 mm Control SIEMENS SL 840 D spindle turning speed range 15.000 U/min B - axis -20 / +120 ° Tool bore HSK-A63 0 Ljdpfx Afovxwuwsfoak tool magacine with 45 Plätzen tool length - max. 365 mm workpiece diameter at used places besides 90 mm tool diameter with 2 vacant positions 130 mm NC rotary table 1.600 mm T-slots 12 groove width 18H12 flute distance 100 mm table load capacity 3.000 KG Table speed max. 30 1/min total power requirement 89 kW weight of the machine ca. 26 t dimensions of the machine ca. 7,00 x 6,20 x 4,15 m 5-Axis machining center with Siemens SINUMERIK 840D control, BLUM Laser, Renishaw, RotoClear, Fire extinguishing system, 2x electronic handwheel, Steptec spindle, Spindle oil cooler, coolant through the spindle, High pressure pump, Bürener belt filter system, Chip conveyor. Machine can be inspected under power

Condition: used, Year of construction: 2000, x-travel 1000 mm y-travel 1040 mm z-travel 750 mm Laedpfxstig D Ij Affok control Heidenhain TNC 426 turning speeds 15000 U/min total power requirement 40 kW weight of the machine ca. 10,1 t required space / m

Condition: used, PLC control, electronic modules, PLC module, plug-in card circuit board, circuit board Laodpfx Ask Aua Nsffek -Manufacturer: Mikron, electronic module printed circuit board for operating unit. TCD22 -Type: WW TCD 22 . 104.73.20.041 -Dimensions cardboard: 410/310/H65 mm -Weight: 0.6 kg

Condition: used, Year of construction: 1992, max. wheel diameter 150 mm gear width 300 mm max. module 4,5 min. module total power requirement 20 kW weight of the machine ca. 6 t dimensions of the machine ca. m Lsdpfxjt Hwxbj Affjak

Condition: ready for operation (used), Year of construction: 1995, Travel X/Y/Z: 710mm/630mm/500mm, table dimensions X/Y: 1200mm/600mm, max. table load: 500kg, tool stations: 22, tool holder: SK40, speed: 6300rpm, feed rate: 10m/min, rapid traverse: 10m/min. Machine dimensions X/Y/Z: approx. 2400mm/3400mm/2300mm, weight: approx. 4600kg, control: Heidenhain TNC 426. Includes internal coolant supply and external cooling. Documentation available. An on-site inspection is possible. Lasdpfew Exr Aox Affok

Condition: used, Safety switch, safety switch, protective grille switch, limit switch, button, safety switch, position switch, magnetic locking switch, safety locking switch -Manufacturer: Schmersal, safety locking device made from CNC milling machine Mikron UME 600 -Type: AZM 161SK-33rka-024 IEC 60947-5-1 -Technical data: see photo of nameplate -Transport dimensions: 270/260/H60 mm Lajdpfx Aorcnm Neffjk -Weight: 1.5 kg

Condition: used, machine/vehicle number: 152.00.80.20, Universal machining center, CNC tool milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine -function tested -Clamping table: 800 x 445 mm -Travel: X/Y/Z 500/500/385 mm -Spindle holder: SK40 -quill stroke: 90 mm -Speeds from: 31.5 to 3150 rpm Laedpfxofbma Ns Affsk -Coolant device -Dimensions: 1475/1770/H2000 mm -Weight: 1966 kg

Condition: used, Transformer, transformer, converter, three-phase autotransformer, three-phase transformer -Manufacturer: Bosch, three-phase transformer from CNC milling machine Mikron WF 51C/155 -Type: 100-911637 -Power: 4.5kVA Lajdpfxskyy Uqj Affjk -Primary: 3x380V -Secondary: 3x95/165 V -Dimensions: 335/135/H350 mm -Weight: 41 kg

Condition: used, CNC control, control panel, logic unit, path control -Manufacturer: Heidenhain, logic unit path control Laedpfx Aopz Sf Eeffsk -Type: LE 407 A 236 484 10 -Individual components: see photos -Dimensions: 480/330/H140 mm -Weight: 9.5 kg

Condition: used, Ball screw with nut, transroll screw, ball screw nut, lead screw, threaded rod, threaded bolt, threaded rod, ball screw, linear bearing, precision ball screw Ljdskvrqijpfx Affoak -Manufacturer: Mikron, ball screw from CNC milling machine Mikron WF 51C/155 -Thread length: 540 mm -Shaft: Ø 32 mm -Dimensions: see photos -Dimensions: 870/140/H130 mm -Weight: 18kg

Condition: used, Permanent magnet motor, permanent magnet motor, electric motor, n-Mot, Perm Magnet Motors, servo motor, geared motor, electric motor, three-phase motor -Manufacturer: Siemens, permanent magnet motor from CNC milling machine Mikron WF 51C/155 -Type: HU3074-OAC01-Z -Voltage: 167 V -Power: 1.8 kW -Speed: 2000 rpm -Shaft: Ø 22 x 45 mm -Number: 2x motor available -Price per piece -Dimensions: 390/140/H185 mm -Weight: 23 kg/pc. Ledpfx Afjkxhpusfsak

Condition: good (used), Servo Drive, Servo Card, Input Processor, Control Card, Input Card, Controller, Converter, Controller, Servo Module, Axis Amplifier, Axis Amplifier, Velocity Control Unit, Spindle Amplifier Module, Servo Amplifier -Manufacturer: Bosch, transistor amplifier completely equipped from CNC milling machine Mikron WF 51C/155 Lasdpfowd N S Dox Affek -Type: TR15-XA-140-230V -Control cards/single modules: see photos -Dimensions: 480/260/H365 mm -Weight: 24 kg

Condition: used, Inrush current limiter, soft starter, soft starter, starting current limiter, soft starting choke -Manufacturer: varimax, soft start choke, three-phase choke from CNC milling machine Mikron WF 51C/155 Laedpfx Afskzpngsfok -Type: D 1515 S3 -Current: 10A -Dimension: 180/90/H190 mm -Weight: 9.5 kg

Condition: used, CNC control, control panel, machining center operator panel, control unit, control panel, control unit -Manufacturer: Mikron, operating unit -Type: TCD 22 - DIN 8659 -Printed circuit board: WW TCD 22 control unit 104.73.20.042 -Individual components: see photos -Dimensions: 480/130/H240 mm Lajdpsprb Dvjfx Affok -Weight: 5 kg