Used Mikron Vce 1000 for sale (178)

Condition: used, functionality: fully functional, Universal Milling Machine Mikron WF 3S with 3-axis Heidenhain TNC 114 digital readout and infinitely variable feed Technical Data: >> Year of manufacture: approx. 1990 >> Fixed angle table, clamping surface 800 x 450 mm >> Spindle speed: 50 - 2240 rpm >> Infinitely variable feed on 3 axes from 1 to 750 mm/min >> Rapid traverse on 3 axes: 1400 mm/min >> Travels X/Y/Z: 500/500/380 mm Prsdpfx Asw Ni Riegwsc >> Vertical quill - SK40 extendable >> Weight approx. 1600 kg Accessories and Equipment: >> 3-axis active digital readout Heidenhain TNC 114 >> Central lubrication >> Operating manual, programming manual, electrical diagrams About the Machine: For sale is a used Mikron WF 3S universal milling machine. It features a Heidenhain path control TNC 114, which means it can move to a programmed dimension in any chosen axis (X, Y, or Z) and stops automatically upon reaching it. Four different zero points can be set, and dimensions can be entered as absolute or incremental values. The feed rate is infinitely adjustable from 0–750 mm/min, and can also be regulated during machining. Rapid traverse can be activated at the push of a button, while spindle speed is step-adjustable from 50 rpm to 2240 rpm, but only adjustable when the machine is stationary. The vertical milling head is mounted with three bolts and can be removed and reattached in just 2 minutes. It is hand-fastened using the swing arm seen on the left side of the machine and can be simply swung aside. A key feature of the machine are the large travel distances relative to its size: Z = 380 mm, X = 500 mm, Y = 500 mm. Additionally, the machine is equipped with electronic protection for the vertical spindle. Both mechanically and electrically inspected. Take the opportunity to inspect and test the machine under power on site.

Condition: good (used), Year of construction: 1996, Parts shown by hand not come. Machine have 2 spindles. One for 6.300 min-1 SK 40 Second up to 42.000 min-1 HSK E40. Spindle replaced 2018. Podpfx Agsruauqswjrc

Condition: ready for operation (used), Five older thread milling machines Mikron are available, 3x Hydraulic Thread Milling Machine Mikron 132.02, 1x Mikron 132-01, 1x Mikron 104-01 and 1x Short Thread Milling Machine Mikron 106.01, an on-site inspection is possible. Prodpfew Sxyxex Agwsc

Condition: good (used), Year of construction: 2002, functionality: fully functional, feed length X-axis: 400 mm, feed length Y-axis: 240 mm, feed length Z-axis: 350 mm, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 40 m/min, spindle speed (max.): 30,000 rpm, Mikron HSM 400U 5-Axis CNC (Graphite Mill) Year:2002 S/N: 107.87.00.024 Control: Heidenhain iTNC530 Spindle Taper: HSK-E40 Spindle Speed: 30,000 RPM Spindle Power: 13 kW (17 HP) ATC: 36-Station Automatic Tool Changer Travels: Prsdpfx Aow H Izpogwjc X: 15.723″ (400 mm) Y: 9.434″ (240 mm) Z: 13.758″ (350 mm) A-Axis: ±110° C-Axis: 360° / 0.001° Tooling System: System 3R Tooling Base (on Trunnion) 48-Station System 3R Tooling Carrousel Blum Laser Tool Measurement System Rapid Traverse Rate: 40 m/min (1,575 IPM) Repeatability: ±0.002 mm Max Workpiece Capacity: Ø230 mm × 350 mm Height Max Load: 25 kg Structure: Polymer Concrete Frame Cooling System: Full Liquid Cooling Machine Dimensions (L×W×H): 3,840 × 2,540 × 2,640 mm Weight: 6,700 kg

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Heidenhain iTNC 530, working area X 600 x Y 450 x Z 450 mm, spindle mount CAT40, 24-position automatic tool changer, 20,000 rpm spindle, machine weight 6,100 kg, power connection 16 kW, main fuse 32 A, operating voltage 400 V, 50/60 Hz Podpfsw Hxzmex Agwerc

Condition: good (used), MIKRON - A 21 / 2 Gear Hobbing Machine -Full technical specifications see photos -Change gears -Mitutoyo magnifier -Original operating manual - COMPLETE Pedpfjw D Dbysx Agwsrc -Many spare parts -Very well-maintained overall condition Dimensions: LxWxH 1.2x1x1.6 meters / Weight 1000kg Errors and input mistakes excepted

Condition: used, Year of construction: 1995, Technical details: x-travel: 600 mm y-travel: 500 mm z-travel: 450 mm weight of the machine ca.: 3,5 t Predpew D Hhpefx Agwjc

Condition: good (used), Year of construction: 1996, travel distance X-axis: 710 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 500 mm, spindle speed (min.): 5 rpm, spindle speed (max.): 5,000 rpm, For sale a machining center of the Mikron brand and type UMS 710-900 The machine is in good condition New ball screw X and Y, new cover Z and new spiral in Z Technical data: x-travel: 710 mm y-travel: 630 mm z-travel: 500 mm CNC control: TNC 355 HEIDENHAIN Table size: 1200 x 600 mm max. table load: 500 kg Spindle holder: SK 40 ring groove spindle speed: 5 - 5000 rpm drive power - milling spindle: 11 kW Feed range: 0 - 10000 mm/min Rapid traverse: 10 m/min Operating voltage: 400 V Total power requirement: 15 kW Machine weight approx.: 5.0 t Space requirement approx.: 2.40 x 3.40 x 2.30 m Chip tray no IKZ 44-position tool changer handwheel Initial filling with operating materials from machines possible on request On request, loading and transport (Europe-wide) can be organized for an additional charge. Prices plus VAT Prodpfx Ajtt Acgjgwoc Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact

Condition: ready for operation (used), Steuerung: HEIDENHAIN TNC 150. Prodegtiaajpfx Agwjc

Condition: excellent (used), Year of construction: 1995, Heidenhain TNC 407 SK 40 Luft Wasser Kühlung Werkzeugwechsler 22 Plätze Verfahrwege 600x500x450 mm Spindeldrehzahlen 5-5000 U/min Vorschubgeschwindigkeit 0-10000 mm/min Antriebsleistung Hauptspindel 6 kW Prjdpfx Aogydn Ijgwjc

Condition: used, Year of construction: 1986, operating hours: 66,247 h, functionality: fully functional, travel distance X-axis: 600 mm, The machine is in good condition and still in operation. Year of manufacture: 1986 Process: X 600 / Y/Z 500 On-time: 66,247 hours Pedpfxswccfhj Agwjrc Remarks: - The price does NOT include any accessories! - Pickup by buyer, from the site. - Pickup date will be agreed upon by the seller. - No warranty - Advance payment (invoice) or cash upon pickup

Condition: good (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 107.44.00.072, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 20 m/min, workpiece weight (max.): 500 kg, table width: 600 mm, table length: 600 mm, table load: 500 kg, overall weight: 9,900 kg, spindle speed (max.): 20,000 rpm, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, Mikron UCP 800 Duro – 5-axis CNC machining centre Predpfowww Rhox Agwoc We offer for sale a precise 5-axis CNC machining centre Mikron UCP 800 Duro from the renowned Swiss brand GF Machining Solutions. The machine is perfect for machining complex parts, moulds, dies, and components that require the highest precision and surface quality.

Condition: used, Year of construction: 1985, max. wheel diameter 80 mm gear width 150 mm max. module 2,5 min. module total power requirement 10 kW weight of the machine ca. 2400 kg M I K R O N (Switzerland) Fully Automatic Gear Hobber for Worm Gears Psdpfxst Hw D Rs Agwerc Model A 33 / 1 Year 1985 Ser.-No. 14.06/14.07/14.15 _____ max. gear- without feed magazine approx. 80 mm max. gear- with feed magazine approx. 50 mm Module max. 2, / 2,5 Axial milling length approx. 150 mm max. workpiece-mounting length approx. 200 mm Milling slide can be swivelled up to 90 degrees Milling cutter - 24 - 50/63 mm Max. radial distance of milling slide 0-14/18 mm Milling cutter adjustment max. 25 mm Milling cutter speed 212 - 2.000 rpm Axial feed range infinitely adjustable 0,05 - 4,0 mm/workpiece rotation radial infinitely adjustable 0,2 - 200 mm/min. Milling spindle drive 3 kW Total electrical load approx. 10 kW - 50 Hz - 380 Volt Weight approx. 2.400 kg Accessories/Special Features: " Fully automatic operation cycle and minimum idle times due to programmable SIEMENS Program Controls S 5 for all machining steps i.e. rapid gear, feed, milling cutter on/off for the loading device, tailstock, possibly shifting, etc. with unit counter, program numbering including 30 different numeric error displays Pneumatic workpiece-loading and unloading facility parallel to work piece axis upright for rod workpieces approx. 140 mm long x 8 mm , including pneumatic double gripper for loading and unloading of work pieces. Raw parts are inserted into change cassettes externally and then placed into the loading device. The double gripper places the parts between workpiece spindle and tailstock, the tailstock spindle sleeve pushes the parts in the main spindle collet and clamps them simultaneously. The finished parts are ejected from the main spindle, then placed back again into the finished parts cassette by the gripper. The whole process is electrically monitored and checked. The complete loading facility is encased by plexiglass. " Hydraulic work piece clamping device including collets and hydraulic ejector " separate cooling system with magnetic separator * separate hydraulic system * various change gears This machine is set up for worm gears/armature shafts that can be used for adjustable car seats, window lifters, etc.

Condition: good (used), Year of construction: 1997, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, For sale is a machining center from Mikron, model UM 600. The machine is in good condition and immediately ready for operation. Technical data: Year of manufacture: 1997 Travel X: 600 mm Travel Y: 500 mm Travel Z: 450 mm Clamping surface: 900 x 530 mm Max. table load: 300 kg Control: Heidenhain TNC 426 Psdpfswx Naqox Agwjrc Tool holder: SK 40 Max. spindle speed: 6,300 rpm Rapid traverse X / Y / Z: 15 m/min No tool changer installed; instead, a support arm for conversion of the milling head is mounted (see picture 4). Setup dimensions (L x W x H approx.): 2.5 x 2.2 x 2.1 m Weight approx.: 3.7 t Accessories such as tool holders and vices are not included in the offer. Transport and loading can be organized upon request at an additional charge, Europe-wide. Prices plus VAT. Inspection by appointment possible. Please contact us – our team is happy to assist you. Trade-in or exchange possible! Machinery purchase/sale BUYING AND SELLING OF PRODUCTION AND METALWORKING MACHINES, ETC. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you wish to sell yours? For further information or contact options, please visit our website.

Condition: ready for operation (used), Speed: 3150 rpm, travel X/Y/Z: 710mm/500mm/500mm, number of spindle speeds: 21, feed: 2000mm/min, spindle mount: ISO40/M16, milling head table height: 559mm, table dimensions X/Y: 500mm/1000mm, T-slot spacing: 63mm, max. workpiece weight: approx. 500kg. Dimensions X/Y/Z: approx. 2700mm/2300mm/2200mm, weight: approx. 3300kg, control: Heidenhain TNC 155, documentation available. Pedpfx Agjtuwk Ujwsrc

Condition: good (used), Mikron WF 32 CH Universal milling machine Machine with chip and splash guard cabin Equipped with a Heidenhain TNC355 control system Technical specifications Manufacturer: Mikron Type: WF 32 CH Control: Heidenhain TNC355 Travels: X 560 mm Y 500 mm Z 400 mm Clamping surface: 530 x 900 mm Rapid traverse: X, Y 6,000 mm/min, Z 5,000 mm/min Prodpfx Agswit Rhjwec Spindle speed: 20 - 6,300 rpm Dimensions: 2,700 x 2,000 x 2,400 mm Weight: 2,400 kg You can find more items - new and used - in our store! International shipping costs on request!

Condition: excellent (used), Year of construction: 2020, operating hours: 105,000 h, functionality: fully functional, machine/vehicle number: 107.32.99.023, travel distance X-axis: 530 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, feed rate X-axis: 22 m/min, feed rate Z-axis: 22 m/min, spindle speed (min.): 22,000 rpm, mount diameter: 63 mm, Equipment: chip conveyor, rotational speed infinitely variable, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Predpfew A Au Nex Agwjc Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: used, Year of construction: 1985, x-travel 500 mm y-travel 500 mm z-travel 350 mm table surface area 800 x 450 mm spindle taper: ISO 40 quill stroke mm feed - longitudinal/cross mm/min feeds vertical mm/min turning speed range max. 3150 U/min voltage 380 V / 50 Hz power capacity 4 kW weight of the machine ca. 1,7 t dimensions of the machine ca. 2,5 x 2,3 x 2,0 m • HEIDENHAIN TNC 155 - control, • with electrical hand wheel, • several tool tapers, Podstv Ia Tspfx Agworc • new set of bevel gears,

Condition: used, Year of construction: 1982, x-travel 400 mm y-travel 400 mm z-travel 380 mm Prodou U Sabepfx Agwjc total power requirement 2,6 kW weight of the machine ca. 1,5t t

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, travel distance X-axis: 110 mm, travel distance Y-axis: 150 mm, travel distance Z-axis: 150 mm, workpiece length (max.): 40 mm, workpiece width (max.): 80 mm, The rotary indexing machine is comprehensively equipped; the machine's original price is approximately €3,000,000. No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel distance X-axis: 110 mm Travel distance Y-axis: 150 mm Travel distance Z-axis: 150 mm Work spindles Max. speed: 20,000 rpm Max. torque: 50 Nm Workpiece Maximum workpiece dimensions: Ø 40 x 80 mm Number of workpiece spindles: Max. 24 Number of tools on the machine: Max. 63 Lubrication pressure at tool center (bar): 80/110 Number of stations: 16 Table positioning repeatability: Ø 20 x 60 mm MACHINE DETAILS Electrical Data Predpfxswy I Tlo Agwjc Voltage, phase frequency: 400 V / 50 Hz Weight & Transport Dimensions Weight: 19,000 kg Transport dimensions: 400 x 300 x 340 cm EQUIPMENT Chip conveyor Rack for oil tubing, extraction system and tubing Loading systems Vibrators Cabinets / side panels / upper channel / cabinet tops Platform Polycarbonate partitions Fire protection system with control console Further information on transportation dimensions can be found in the attached packing list.

Year of construction: 1988, condition: ready for operation (used), Verfahrweg X/Y/Z: 710mm/500mm/460mm, Tischabmessungen X/Y: 1000mm/500mm, Tischbelastung max: 500kg, Werkzeughalter: SK40, Drehzahl: 4000rpm, Maschinenabmessungen X/Y/Z: ca. 2000mm/2600mm/2250mm, Gewicht: ca. 3400kg, Steuerung: Heidenhain TNC 355, Betriebsstunden: ca. 34000h. Inklusive Kühlmitteleinrichtung, kompletter Arbeitsraumeinhausung, ca. 34x SK40 Werkzeughalter, Schlitten und Wellen zum Abrollen. Dokumentation vorhanden. Besichtigung vor Ort ist möglich. Predpfx Aev Sct Sogwec

Condition: used, Year of construction: 1992, max. wheel diameter 150 mm Podst Hwxbspfx Agworc gear width 300 mm max. module 4,5 min. module total power requirement 20 kW weight of the machine ca. 6 t dimensions of the machine ca. m

Year of construction: 1995, condition: ready for operation (used), Travel X/Y/Z: 560mm/500mm/400mm, speed: 5000rpm, table dimensions X/Y: 900mm/530mm, feed rate: 8m/min, rapid traverse: 10m/min, tool stations: 22, tool holder: SK40. Machine dimensions X/Y/Z: approx. 3950mm/2650mm/2150mm, weight: approx. 3000kg, control: Heidenhain TNC 407/415, operating hours: 29647h. The central lubrication system shows issues. Documentation available. An on-site inspection is possible. Psdpsw H At Hsfx Agwsrc

Condition: ready for operation (used), Year of construction: 1995, Travel X/Y/Z: 710mm/630mm/500mm, table dimensions X/Y: 1200mm/600mm, max. table load: 500kg, tool stations: 22, tool holder: SK40, speed: 6300rpm, feed rate: 10m/min, rapid traverse: 10m/min. Machine dimensions X/Y/Z: approx. 2400mm/3400mm/2300mm, weight: approx. 4600kg, control: Heidenhain TNC 426. Includes internal coolant supply and external cooling. Documentation available. An on-site inspection is possible. Prjdsw Exr Aepfx Agwec

Condition: ready for operation (used), Year of construction: 1994, Stations: 24, substations: 20, side stations: 20, axes: 2/station, collets: 24, production output single/double cycle: 120/240 pieces/min, stroke: 35mm, max. workpiece diameter: 25mm, spindle speed: 20000rpm, machine weight: approx. 2650kg, control: Mikron MAC 50, operating hours: approx. 17335h. Documentation available. An on-site inspection is possible. Prodpow Emx Rofx Agwsc