Used Meter Band for sale (7,254)

Condition: used, Year of construction: 2006, Used machine Year of manufacture: 2006 Condition: completely overhauled Equipment and technical data: - fitted with new glue application system - manually adjustable infeed fence - milling unit 1961 - edge feeder 1903 - glue application station 1906 with tracking nozzle - pressure unit 1816, pneumatic - end trimming unit 1822 - milling unit 1942 M for radius, chamfer, flush trimming - complete air nozzle - scraper unit 1929 - chip collection box - surface scraper 1964 - extraction hood set - complete safety covers - total length: 5,291 mm - workpiece thickness: min. 6 / max. 50 mm - edge band thickness depending on configuration: 0.4–5 mm - max. edge band height: 55 mm - minimum edge band strip length: 350 mm - max. edge band overhang/height per side: 3 mm - minimum workpiece width: 60 mm - minimum workpiece length: 180 mm - feed speed: 12.5 m/min - extraction: - jointing/milling unit: 900 m³/h - milling unit: 280 m³/h - scraper unit: 280 m³/h - static vacuum: - jointing/milling unit: 1,490 Pa - milling unit: 1,650 Pa - minimum air velocity: 20 m/sec Cedpfowka H Sox Ailegw - jointing/milling unit connection: 70 mm - scraper unit connection: 70 mm - compressed air: 6 bar Availability: short notice Location: Röllbach

Condition: used, Year of construction: 2004, Used machine Year of manufacture: 2004 Equipment and technical data: Edge feed for rolls and strips Joining milling unit with 2 milling heads Adhesive application system cartridge 3-roll printing unit Cross-cut saw unit Radius milling unit Radius scraper unit Corner copying unit Surface scraper Buffing unit Workpiece thickness min./max.: 6/50 mm Edging thickness: 0.4-15 mm Edging height max.: 55 mm Csdovymdqjpfx Ailjgw Edging length strip min.: 350 mm Edging projection per side max.: 3 mm Workpiece width min.: 60 mm Workpiece length min.: 180 mm Feed speed: 12.5 m/min. Machine dimensions L x W x H 6480 x 1250 x 1690 mm Availability: short term Storage location: Flörsheim

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Equipment and technical data: Gluing, max. 8 - 55 mm Incl. rotating control panel HF joining unit, 2-motor Incl. quick-heating tank, interchangeable, Teflon-coated Incl. electronic positioning of the pressure rollers Incl. swiveling double miter saw unit Incl. flush trimming unit Incl. program-controlled chamfering, radius and corner copying unit with nesting package Cgsdpsw Nadgsfx Ailew Incl. radius pull blade with nesting package Incl. surface pull blade Incl. grooving unit Incl. edge trimming unit Incl. spray unit Availability: short notice Location: Flörsheim

Condition: used, Year of construction: 2009, Used machine Year of manufacture: 2009 Single-sided automatic edge banding machine with CNC control, 10" touch screen Industrial conveyor chain 1 1/4" Joint milling unit FI-502 Glue application unit VC-710 End trimming unit IN-801 Top and bottom flush trimming unit RS-100 2 motorized multifunction profiling units - contour milling unit CR-202 (FAST system with 4 standard positions) Scraper unit RBK-503, NC 2 positions Flat scraper RCC-701 Workpiece thickness: 10-65 mm Max. workpiece height with contour milling unit (depending on profiles): 35-65 mm Edge thickness from roll: 0.4-3 mm Edge thickness from strip material: 0.4-22 mm (depending on unit) Codpfx Aiev R Nk Ujlogw Minimum workpiece length: 140 mm Minimum workpiece width (with length 140 mm): 85 mm Minimum workpiece width (with length 250 mm): 50 mm Feed speeds: 10-14-18-20 Central extraction connection: 200 mm Extraction connection, edge banding: 80 mm Extraction connection, joint milling: 120 mm Glue pot capacity: approx. 3 kg Heat-up time at half fill: approx. 10 min Length: 6000 mm Width: 1780 mm Height: 1770 mm Machine is offered without the workpiece return unit shown in the pictures Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 2010, Used machine Year of manufacture 2010 With joining unit and corner rounding unit Control panel with LCD display and keypad Joining unit with 2 counter-rotating diamond cutters Cgjdow I H Rkjpfx Ailsw With edge feeder for roll and strip material With glue roller and glue unit With pre-trimming from the roll With pressure unit With trimming unit with pulling trimming cut With flush and radius trimming unit Corner rounding unit for front edges Manual unit adjustment Edge thickness 0.4-5 mm Workpiece height 8-60 mm Min. workpiece width 70 mm Min. workpiece length 140 mm Feed speed 11 m/min With radius scraper unit With flat scraper With polishing unit Extendable workpiece support Extraction connection 120 + 2 x 80 mm Weight approx. 990 kg L x W x H 4550 x 1550 x 1100 mm Availability: Short-term Storage location: Flörsheim

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Very well-maintained machine Equipment: - Machine table with 13 running rollers for improved workpiece guidance - Edge feed, synchronized with the belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with blade (for cuttable edges) - Three pressure rollers - Belt feed 0.25 kW; approx. 1250 mm long; approx. 6.0 m/min; 50 mm wide toothed belt with thick, workpiece-friendly rubber cover. Digital counter for height adjustment Cjdpfszc Agkox Ailsgw - Direct glue application to the workpiece: leak-proof glue pot with glue reservoir from below and fast heat-up time after machine downtime - Flush-trimming unit for workpiece front and rear edge, automatic scanning on the workpiece, pneumatic trimming with blade for cuttable edges - Flush-milling unit with vertical tracking and horizontal guidance, reproducible settings via digital counters, 2 powerful 0.4 kW high-frequency motors, infinitely variable from 4,000 to 18,000 rpm, cutter Ø 70 mm, Z4, radius 2 mm/15°; central extraction port Ø 100 mm, 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper milling cutter with the belt feed - Continuous workpiece support approx. 1800 mm long, workpiece support rail extendable by approx. 300 mm - Rotatable film disc Ø 800 mm Technical details: - Minimum workpiece width approx. 80 mm - Workpiece thickness 10 – 50 mm - Minimum workpiece length approx. 220 mm - Edge thickness 0.4 – 2.0 mm - Roller separation max. 1.0 x 55 mm, 2 x 45 mm - Heating capacity glue pot 2.7 kW - Electrical connection 400 V, 50 Hz, 3Ph + N - Total connected load 3.8 kW - Heat-up time approx. 10 minutes - Pneumatic connection 6 bar - Working height approx. 880 mm - Dimensions approx. 1800 x 700 x 1300 mm without film disc Ø 800 - Net weight approx. 260 kg Availability: short notice Location: Flörsheim

Condition: new, Year of construction: 2024, New machine Codpjw Nabrjfx Ailogw Year of manufacture 2024 Equipment and technical data: · Wheel diameter: 600 mm · Belt speed: 1550 m/min · Cutting height: 400 mm · Cutting width: 580 mm · Blade length max.: 4735 mm · Saw blade width min. / max.: 15 mm / 30 mm · Optional with special covering saw blade width min. / max.: 8 mm / 25 mm · Table size: 810 x 590 mm · Table height: 920 mm · Extraction nozzle: 2 x Ø 100 mm · Motor power: 2.2 kW / 3 HP · Voltage: 400 V / 50 Hz · Color: RAL 7035 light gray and RAL 5000 violet blue · Net weight: approx. 275 kg TECHNICAL DESCRIPTION · Solid German mechanical engineering · Machine stand in an attractive, modern, torsion-free double-chamber welded steel construction · Upper and lower doors secured by limit switches · Upper and lower precision band saw blade guide APA 2, size. 2 · Finely planed gray cast iron table · Swiveling table top up to 45° · Dynamically balanced band saw wheels with vulcanized rubber bandages · Stop ruler can be used to the left of the saw blade, stop profile can be folded over · Blade tension indicator · 1 saw blade 4735 x 25 x 0.6 mm, tooth width 9 mm, No. 3780.250D · Mechanical height adjustment of the saw blade guard using a handwheel with locking pinion · From 2.2 kW - rotary cam switch with direct start and emergency stop button · From 3.0 kW - rotary cam switch with star-delta start and emergency stop button · Mechanical motor brake with main switch and motor protection relay · CE-compliant Incl. transport pallet Incl. pre-freight to 65239 Hochheim Availability: short term Storage location: Flörsheim

Condition: used, Year of construction: 1983, Used machine Year of manufacture: 1983 for pre-coated edge material Edge material up to 1.3 mm with roller guillotining with flush trimming with knife with top/bottom flush and bevel milling with HF motors Location: Röllbach Cgjdpfsxc Rl Hox Ailow Availability: short term

Condition: used, Year of construction: 2020, Used machine Year of manufacture: 2020 Features: Csdpfex Enquex Ailsgw - Aggregate control via touch-screen - Joint milling unit - Glue pot - End trimming unit - Radius milling unit - Radius scraper unit - Flat scraper unit - Buffing unit - Spraying unit (front and rear) Location: Rhineland-Palatinate Availability: By arrangement Sale on behalf of customer. Details provided without guarantee.

Condition: used, Year of construction: 2013, total height: 2,220 mm, total length: 6,100 mm, total width: 2,350 mm, Colour: Grey Weight: 6.000 kg Horizontal band saw machine High point HP-400 Year of construction 2013 Serial number 213-051 Saw wheel diameter 860 mm Maximum cutting width 400 mm Motor 22kW (30hp) (Per piece!) Conveyor belt in poor condition. Cedpfxownhn Es Ailsgw - Year: 2013 - Documentation available: No - CE certificate present: No - Serial number: 213-051 - Transport dimensions: 6100mm x 2350mm x 2220mm (l x w x h) - Transport weight [kg]: 6000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Mössner Rekord SM / 420 Vertical Band Saw for Metal Throat depth: 410 mm Wheel diameter: 420 mm Maximum workpiece height: 265 mm Saw band length: 3160 mm – 3260 mm Working height: 1000 mm 4 gearbox speeds Space required: approx. 920 mm x 740 mm x 1815 mm (L x W x H) Weight: approx. 560 kg Band welding unit: Ideal You are welcome to come and inspect the machine. Codpfxsyh Uyqs Ailjgw We can arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can be issued, provided a valid VAT identification number is supplied. Subject to prior sale. Visit our shop and take a look at our other offers as well. All company names and trademarks mentioned are the property of their respective owners and are used only for identification and product description purposes. Deviation from technical data or errors in the description of the item may occur and are reserved.

Condition: ready for operation (used), Jaespa AS 6 Vertical Band Saw Blade length: min - 4400mm; max - 4600mm Table: 670mm x 670mm Thrust: 620mm Weight: 834 kg Dimensions: 1400mm x 800mm x 2250mm (L x W x H) You are welcome to stop by for a viewing. We are happy to arrange a cost-effective shipping service for you! You will receive a proper invoice. For international customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Cgjdpfx Aswcp Rkoiljw Visit our shop and check out our other offers. Company names and trademarks mentioned are the property of their respective owners and are used solely for identification and product description purposes. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: used, Year of construction: 2012, operating hours: 5,951 h, Empty weight: 1 kg Mast: articulated arm Cgsdpfezac U Nsx Ailsw Please contact Emal Jaweed for more information

Condition: excellent (used), CATALOG NUMBER 7050 TECHNICAL DATA - Wheel diameter: 800 mm - Table dimensions: 1100x800 mm - Angle-adjustable table - Motor: 5.5 kW - Max cutting height: 340 mm - Throat/clearance (blade to frame): 680 mm - Extraction port diameter: 90 mm Csdey R A Edjpfx Ailegw - Dimensions (L/W/H): 1500x950x2600 mm - Weight: 987 kg ADVANTAGES – Manufactured in Poland – Very good condition – Used saw Net price: 8,900 PLN Net price: 2,120 EUR based on exchange rate 4.2 EUR (Prices may change with significant fluctuations)

Condition: excellent (used), Catalogue number: 7983 TECHNICAL DATA Equipment: Csdpfx Aey Id Nleilsgw - Disc - Pre-milling unit - Tape feeder - Guillotine - Glue tank (granulate) - 4 pressure rollers (1 rubber, 3 metal) - End trimming unit with saw blades front/rear - 2 edge milling units, top/bottom with radius cutters - 2 scrapers for removing excess glue, radius, top/bottom - Corner rounding unit - Straight scraper, top/bottom - 2 polishers - Max feed speed: 10 m/min - Min workpiece length: 260 mm - Min workpiece width: 90 mm - Workpiece thickness: 10–60 mm - Edge banding tape thickness: 0.5–3 mm - Pull-out workpiece support from the table - Total power: 12.3 kW - Extraction nozzle diameter: 140 mm - Dimensions (LxWxH): 5000x1520x1600 mm - Weight: 1295 kg ADVANTAGES - Not repainted / original paint - Pre-milling, corner rounding - Control panel with quick selection of pre-set work programs - German made - Full technical documentation (DTR) - Machine after service (inspection date: 17.10.2025, next inspection: 17.10.2026) - Very good condition - Used edgebander Net price: 38,900 PLN Net price: 9,260 EUR (based on exchange rate 4.2 EUR) (Prices may vary depending on exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7051 TECHNICAL SPECIFICATIONS - Wheel diameter: 630 mm Cgedjy R A E Depfx Ailow - Table dimensions: 890x710 mm - Table adjustable in angle - Motor: 3 kW - Max cutting height: 240 mm - Throat (band to frame): 570 mm - Extraction port diameter: 100 mm - Dimensions (L/W/H): 1250x800x2300 mm - Weight: 681 kg ADVANTAGES – Manufactured in Poland – Very good condition – Used saw Net price: 7,900 PLN Net price: 1,880 EUR depending on the rate 4.2 EUR (Prices subject to change in case of significant fluctuations)

Condition: used, roll diameter 400 mm throat 400 mm table-size 610 x 500 mm saw band length 2780 - 2980 mm turning speeds 22 - 147 m/min weight of the machine ca. 0,4 t dimensions of the machine ca. 0,6 x 0,8 x 1,9 m Bandsaw with - Ideal welding unit - Grinding unit Cgodpfx Aiozhn U Nolow - Machine light

Condition: new, Year of construction: 2024, cutting height (max.): 150 mm, cutting range round steel at 45°: 108 mm, cutting range round steel at 90°: 108 mm, BERG+SCHMID GBS 218 Eco AutoCut double mitre bandsaw Speed: 25-80 m/min - Mitre left 60° - For cutting steel, stainless steel and aluminum profiles - Quick-clamping vice with quick-clamping device a. - Built-in blade tension control b. - Saw blade guide made of carbide c. - Electric automatic cooling system - Machine base (supplied disassembled) The AutoCut system consists of: - Hydraulic cylinder, feed control, spring assembly, limit switch and enables three work sequences: 1. automatic lowering of the saw frame via hydraulic cylinder with infinitely adjustable feed control valve and limit switch at the end of the cut Cgedpjt I R Edjfx Ailjw 2. high-speed lowering of the saw frame from the rest position up to the workpiece, then switching to normal saw feed 3. manual operation - hydraulic cylinder works as a brake cylinder Saw blade dimensions: 2455x27x0.9mm Further accessories such as saw bands, roller conveyors, measuring stops, minimum quantity lubrication etc. available on request! Delivery time: ex stock Waiblingen Beinstein

Condition: used, functionality: fully functional, machine/vehicle number: 82415, type of input current: three-phase, total width: 1,500 mm, total length: 2,500 mm, input voltage: 400 V, input current: 16 A, cutting height (max.): 100 mm, 114 A – BERGMAN & JOHANSSON 420 Bandknife Fabric Cutting Machine – Industrial Precision Cutting Unit Description For sale is a Bergman & Johansson industrial bandknife fabric cutting machine, model Type 420, manufactured in Sweden. This machine is designed for high-precision cutting of stacked textile materials using a continuous vertical bandknife system. It is a core component in professional garment cutting rooms, especially suited for detailed shaping of components such as collars, sleeves, and smaller pattern pieces. The system has been used as part of a dedicated cutting workflow together with Finn-Convey spreading tables (unit 22 C), enabling efficient transition from fabric spreading to precision cutting. The long-arm C-frame construction allows handling of large fabric stacks, while maintaining excellent control and cutting accuracy. The machine was in production use prior to factory shutdown and has been serviced on 27.02.2026. Technical Details • Manufacturer: Bergman & Johansson i Borås AB, Sweden • Model: Type 420 • Band length: approx. 4200 mm • Serial number: 82415 • Machine type: Industrial bandknife fabric cutting machine Motor Specifications • Manufacturer: Leroy-Somer • Type: LS 80 P • Power: 0.75 kW • Speed: approx. 1410 rpm • Voltage: 380–400 V (3-phase, star connection) • Current: approx. 2.0 A (Y) / 3.45 A (Δ) • Frequency: 50 Hz • Protection class: IP54 Machine Features • Continuous vertical bandknife for precision cutting • Long-arm (C-frame) design for large cutting areas • Integrated cutting table with smooth surface • Adjustable blade guard for safety and accuracy • Built-in sharpening system for continuous blade maintenance • Heavy-duty industrial construction • Mobile base with wheels for flexible positioning Cutting Capabilities Cgodsy Au Hqspfx Ailow • High-precision cutting of multi-layer fabric stacks • Suitable for both straight and complex contour cutting • Ideal for detailed garment components and templates • Clean and accurate cuts across various textile types System Characteristics • Table-based cutting process, material is guided manually • Optional air table functionality (depending on configuration) to reduce friction • Stable blade tracking and tension system for consistent performance • Designed for continuous industrial operation Condition Used industrial condition Serviced on 27.02.2026 Machine was operational prior to factory shutdown Typical wear consistent with industrial use Inspection possible prior to dismantling Sold as-is, where-is, without warranty Applications • Precision cutting of fabric stacks • Garment component cutting • Denim and workwear production • Textile cutting rooms • Small to mid-scale production setups Location Valga, Estonia Dismantling & Transport Buyer responsible for dismantling and transport Professional dismantling recommended

Condition: repair required (used), Year of construction: 2008, functionality: not functional, operating hours: 20,000 h, power: 15 kW (20.39 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 850 mm, cutting width (max.): 1,000 mm, rotational speed (max.): 80 rpm, rotational speed (min.): 15 rpm, total height: 3,200 mm, total length: 5,700 mm, total width: 3,900 mm, overall weight: 20,000 kg, table height: 800 mm, year of last overhaul: 2021, Equipment: CE marking, rotational speed infinitely variable, PEGAS 850×1000 GOLEM 2M – Heavy-Duty Double Column Band Saw for Custom Rebuild The PEGAS 850×1000 GOLEM 2M is an extra heavy-duty double column band saw designed for cutting large steel sections, plates and profiles. This machine is offered as a base machine for individual rebuilding or modernization, making it an excellent project for companies wishing to install their own control system, drives and automation. Codpezhndkjfx Ailegw A comparable new PEGAS-GONDA 850×1000 GOLEM machine is currently offered at approximately EUR 250,000, providing an excellent opportunity to build a high-capacity industrial saw at a significantly lower investment. Machine Status Base machine for custom rebuild Mechanical structure in good condition Without electrical installation Without drive motors and control system Ideal for retrofit, CNC conversion or special applications Main Features Heavy-duty double column construction Cutting capacity: 850 × 1000 mm Large 1 × 2 m work table Horizontal and vertical cutting capability Rigid industrial frame Designed for heavy steel fabrication and oversized workpieces Year of manufacture: 2008 Suitable for Steel fabrication companies Machine rebuild specialists OEM projects Heavy engineering Custom automation and retrofit applications This machine provides a robust mechanical platform for building a high-performance industrial band saw tailored to individual production requirements. Its massive construction and large cutting capacity make it an excellent alternative to purchasing a new machine.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, operating hours: 20 h, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 500 Hz, type of input current: three-phase, cutting height (max.): 540 mm, cutting width (max.): 500 mm, control type: PLC-controlled, roller diameter: 80 mm, pivoting range: 90 °, actuation type: electric, rotational speed (max.): 150 rpm, rotational speed (min.): 15 rpm, total height: 2,522 mm, total length: 2,030 mm, total width: 3,700 mm, overall weight: 3,235 kg, table height: 800 mm, year of last overhaul: 2026, saw blade length: 6,200 mm, saw blade width: 41 mm, type of cooling: water, Equipment: CE marking, documentation/manual, lighting, motor brake, rotational speed infinitely variable, PEGAS 540 CALIBER A-CNC Automatic Two-Column Metal Band Saw ✓ Machine sold directly by the manufacturer ✓ Manufacturer's showroom demonstration machine ✓ Now available for sale ✓ 6-month warranty ✓ Service and spare parts provided directly by the manufacturer ✓ Regularly inspected and professionally maintained ✓ Heavy-duty industrial construction ✓ Inspection and test run available before purchase ✓ Available for immediate delivery Technical Specifications Maximum cutting capacity (round): 550 mm Maximum cutting capacity (rectangular): 550 × 520 mm Straight cutting (0°) Fully automatic CNC operation Variable blade speed: 20–120 m/min Main motor power: 5.5 kW Saw blade dimensions: 6200 × 41 × 1.3 mm Automatic hydraulic material clamping Automatic servo-driven material feeder Mitsubishi PLC control with colour touch-screen Hydraulic blade tensioning Automatic blade load control Coolant system Power supply: 3 × 400 V / 50 Hz Machine weight: approx. 3,700 kg Manufacturer's Showroom Machine We are the manufacturer of PEGAS band saws, and this machine has been used exclusively as our showroom demonstration unit. It has been professionally serviced by our own technicians, carefully maintained, and kept in excellent working condition. The machine is now available for sale as part of our showroom renewal programme. This is a unique opportunity to purchase a manufacturer-maintained demonstration machine with a full service history and immediate spare parts support. Built for High-Volume Industrial Production Cgsdpfx Aijzhm Uzsljw The PEGAS 540 CALIBER A-CNC is a highly productive, fully automatic two-column band saw designed for demanding industrial applications and continuous production. It is engineered for straight cutting of solid bars, tubes, profiles and bundles made of carbon steel, stainless steel, tool steel and other metallic materials. Its rigid construction and advanced CNC control ensure maximum productivity, outstanding cutting accuracy and long-term reliability. The machine features a servo-controlled automatic material feeder with programmable cutting cycles. The Mitsubishi PLC control system with a colour touch-screen allows the operator to store up to 100 cutting programs, each with multiple cutting lengths and quantities, making it ideal for serial production. Automatic positioning, material feeding and cutting significantly reduce setup time and increase production efficiency. The robust two-column design minimizes vibration during cutting and provides exceptional rigidity. The continuously variable blade speed, hydraulic blade tensioning and automatic blade load control optimize cutting performance while extending blade life. The machine is also equipped with automatic coolant delivery, powered blade cleaning and a fully enclosed guarding system for maximum operator safety and reliable operation in demanding production environments. Inspection and Test Run The machine can be inspected and tested under working conditions at our manufacturing facility in Slavkov u Brna, Czech Republic. If you are interested, please contact us. We will be happy to demonstrate the machine, answer any questions, and provide additional technical information.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, operating hours: 10 h, power: 3 kW (4.08 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 360 mm, cutting width (max.): 500 mm, control type: PLC-controlled, roller diameter: 56 mm, pivoting range: 60 °, actuation type: hydraulic, rotational speed (max.): 100 rpm, rotational speed (min.): 20 rpm, total height: 2,340 mm, total length: 3,000 mm, total width: 1,080 mm, overall weight: 740 kg, table height: 812 mm, year of last overhaul: 2026, saw blade length: 4,780 mm, saw blade speed: 100 rpm, saw blade width: 34 mm, type of cooling: water, Equipment: CE marking, documentation/manual, motor brake, rotational speed infinitely variable, PEGAS 360×500 SHI-LR Semi-Automatic Metal Band Saw ✓ Machine sold directly by the manufacturer ✓ Manufacturer's showroom demonstration machine ✓ Now available for sale ✓ 6-month warranty Cgodpfx Aszhm Rcoilew ✓ Service and spare parts provided directly by the manufacturer ✓ Regularly inspected and professionally maintained ✓ Heavy-duty industrial construction ✓ Inspection and test run available before purchase ✓ Available for immediate delivery Technical Specifications Maximum cutting capacity (round): 360 mm Maximum cutting capacity (rectangular): 500 × 350 mm Continuously adjustable mitre cutting: 60° right to 60° left Semi-automatic hydraulic operation Variable blade speed: 20–100 m/min Total motor power: 3.0 kW Saw blade dimensions: 4780 × 34 × 1.1 mm Hydraulic material clamping vice Hydraulic saw head feed and return Automatic blade load control (PEGAS BRP) Mitsubishi PLC control with touch-screen display Coolant system Power supply: 3 × 400 V / 50 Hz Machine weight: approx. 740 kg Manufacturer's Showroom Machine We are the manufacturer of PEGAS band saws, and this machine has been used exclusively as our showroom demonstration unit. It has been professionally serviced by our own technicians, carefully maintained, and kept in excellent working condition. The machine is now available for sale as part of our showroom renewal programme. This is an excellent opportunity to purchase a manufacturer-maintained demonstration machine at an attractive price. Built for Demanding Industrial Production The PEGAS 360×500 SHI-LR is a heavy-duty semi-automatic horizontal band saw designed for daily industrial operation, piece production and small- to medium-batch manufacturing. It is suitable for cutting structural steel, stainless steel, tool steel, solid bars, tubes and profiles with high accuracy and reliability. The robust welded saw frame and heavy-duty construction provide exceptional rigidity, vibration damping and long service life even under intensive production conditions. The saw head is mounted in preloaded guide bushings with low-friction surfaces, ensuring precise and smooth operation. The blade speed is continuously adjustable from 20 to 100 m/min via a frequency inverter, allowing optimum cutting performance for a wide range of materials. The hydraulic semi-automatic cycle automatically performs material clamping, cutting, saw head return and vice opening, while loading and unloading of material remain manual. The integrated PEGAS BRP blade load control continuously monitors cutting load and optimizes the feed, protecting the saw blade and increasing productivity. The Mitsubishi PLC control system with touch-screen display provides clear machine diagnostics, cutting parameters and operating information. Inspection and Test Run The machine can be inspected and tested under working conditions at our manufacturing facility in Slavkov u Brna, Czech Republic. If you are interested, please contact us. We will be happy to demonstrate the machine, answer any questions, and provide additional information.

Condition: like new (used), Year of construction: 2026, functionality: fully functional, operating hours: 10 h, power: 1.5 kW (2.04 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 260 mm, cutting width (max.): 280 mm, control type: PLC-controlled, roller diameter: 50 mm, pivoting range: 60 °, actuation type: electric, rotational speed (max.): 15 rpm, rotational speed (min.): 100 rpm, total height: 1,780 mm, total length: 1,900 mm, total width: 1,050 mm, overall weight: 420 kg, table height: 795 mm, year of last overhaul: 2026, saw band length: 2,970 mm, saw blade speed: 100 rpm, saw blade width: 27 mm, number of digital displays: 1, Equipment: CE marking, cooling unit, documentation/manual, motor brake, rotational speed infinitely variable, PEGAS 260×280 SHI-LR Semi-Automatic Metal Band Saw ✓ Machine sold directly by the manufacturer ✓ Manufacturer's showroom demonstration machine ✓ Now available for sale ✓ Machine sold directly by the manufacturer ✓ 6-month warranty ✓ Service and spare parts provided by the manufacturer ✓ Regularly inspected and professionally maintained ✓ Heavy-duty cast iron construction ✓ Inspection and test run available before purchase ✓ Available for immediate delivery Technical Specifications Maximum cutting capacity (round): 255 mm Maximum cutting capacity (rectangular): 280 × 250 mm Continuously adjustable mitre cutting: 60° right to 45° left Semi-automatic hydraulic operation Variable blade speed: 20–100 m/min Cgodpfx Aiszhm Easlow Motor power: 1.5 kW Saw blade dimensions: 2720 × 27 × 0.9 mm Hydraulic material clamping vice Hydraulic saw head feed and return Coolant system Power supply: 3 × 400 V / 50 Hz Machine weight: approx. 420 kg Built for Daily Industrial Use The PEGAS 260×280 SHI-LR is a semi-automatic band saw designed for both single-piece and small-batch production. The machine is suitable for straight and mitre cutting of structural steel, stainless steel, tool steel, solid bars and profiles. Angle cutting is continuously adjustable from 60° to the right and 45° to the left. All major load-bearing components are manufactured from high-quality cast iron, providing exceptional rigidity, vibration damping, high cutting accuracy and a long service life. The saw head is inclined at 25°, reducing blade wear and extending blade life. The hydraulic semi-automatic cycle controls material clamping, cutting, saw head return and vice opening, while material loading is performed manually. Feed pressure and cutting feed rate are easily adjustable for optimum cutting performance. Inspection and Test Run The machine can be inspected and tested under working conditions at the manufacturer's premises in Slavkov u Brna, Czech Republic. If you are interested, please contact us. We will be happy to demonstrate the machine and answer any questions you may have.

Condition: like new (used), Year of construction: 2026, functionality: fully functional, operating hours: 10 h, power: 1.4 kW (1.90 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 230 mm, cutting width (max.): 280 mm, control type: manual, roller diameter: 50 mm, pivoting range: 60 °, actuation type: hydraulic, rotational speed (max.): 35 rpm, rotational speed (min.): 70 rpm, total height: 1,950 mm, total length: 1,600 mm, total width: 890 mm, overall weight: 305 kg, table height: 787 mm, year of last overhaul: 2026, saw blade length: 2,720 mm, saw blade width: 27 mm, type of cooling: water, Equipment: CE marking, documentation/manual, saw blade guard, PEGAS 230x280 GH-LR Gravity Band Saw – Robust Czech-Made Metal Cutting Machine PEGAS 230x280 GH-LR is a high-quality gravity-operated band saw designed for accurate straight and mitre cutting in workshops, maintenance departments and small-series production. The saw combines a robust cast iron construction with reliable hydraulic feed control, ensuring precise cuts and long service life. Main features Cutting capacity: Ø230 mm / 280 × 220 mm Mitre cutting: 0° to +60° right and 0° to -45° left Gravity feed with hydraulic downfeed control Heavy-duty cast iron saw bow, vice and swivel table Manual quick-clamping vice Two blade speeds: 35 / 70 m/min Blade size: 2720 × 27 × 0.9 mm Coolant system included Automatic stop at the end of the cut Mechanical blade tensioning with tension indicator Carbide blade guides with guide bearings 400 V, 0.75 / 1.1 kW motor Machine weight: approx. 305 kg Suitable for Structural steel Stainless steel Tool steel Solid bars, tubes and profiles Cgsdpfx Aijzhm Aljlow Workshop production and small batch manufacturing The PEGAS 230x280 GH-LR is known for its durable construction, accurate cutting performance and easy operation, making it an excellent choice for professional metalworking applications. Condition: Excellent Voltage: 3×400 V Available immediately Machine can be inspected under power CE documentation available Location: Czech Republic

Condition: ready for operation (used), Year of construction: 2025, functionality: fully functional, operating hours: 20 h, power: 1.1 kW (1.50 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 220 mm, cutting width (max.): 280 mm, control type: manual, roller diameter: 50 mm, pivoting range: 60 °, actuation type: electric, rotational speed (max.): 65 rpm, rotational speed (min.): 30 rpm, total height: 170 mm, total length: 1,410 mm, total width: 600 mm, overall weight: 235 kg, table height: 950 mm, year of last overhaul: 2025, cutting speed: 70 mm/min, saw blade length: 2,450 mm, saw blade width: 27 mm, type of cooling: water, Equipment: CE marking, documentation/manual, Metal Band Saw – Direct from the Manufacturer ✓ Machine sold directly by the manufacturer ✓ 6-month warranty ✓ Service and spare parts provided by the manufacturer ✓ Regularly inspected and professionally maintained ✓ Heavy-duty cast iron construction ✓ Inspection and test run available before purchase ✓ Available for immediate delivery Technical Specifications Maximum cutting diameter: 220 mm Maximum rectangular cutting capacity: 230 × 150 mm Continuously adjustable mitre cutting: 0° to +60° Gravity-fed saw arm with hydraulic feed control Two-speed motor: 0.75 / 1.1 kW Blade speed: 30 / 65 m/min Blade dimensions: 2450 × 27 × 0.9 mm Manual quick-release vice Coolant system Power supply: 3 × 400 V Machine weight: approx. 235 kg Built for Daily Industrial Use The saw is designed for both single-piece and small-batch production. All major load-bearing components are made of cast iron, ensuring excellent rigidity, high cutting accuracy, and a long service life. The saw head is inclined at 25°, which helps extend the life of the saw blade. Inspection and Test Run Cjdpfx Aezhmr Heilogw The machine can be inspected and tested under working conditions at the manufacturer's premises in Slavkov u Brna, Czech Republic. If you are interested, please contact us. We will be happy to demonstrate the machine and answer any questions you may have.