Used Mesh Waving for sale (865)

Condition: new, functionality: fully functional, machine/vehicle number: D456T10385A, Year of construction: 2026, load capacity: 1,400 kg, lifting height: 4,620 mm, free lift: 1,518 mm, fuel type: electric, mast type: triplex, construction height: 2,050 mm, fork length: 1,150 mm, empty load weight: 1,040 kg, total length: 1,933 mm, drive type: Elektro, construction width: 790 mm, High-lift pallet truck Chassis number: D456T10385A Load center: 600 Fork width: 185 mm Fork thickness: 55 mm Mast type: Triplex Condition: New Technical condition: New Front tire type: Vulkollan Front tire size: 230 x 70 Cgedpeyng N Hefx Ailow Front tire condition: New Rear tire type: Polyurethane Rear tire size: 85 x 100 Rear tire condition: New Battery voltage: 24V Battery Ah: 210Ah Battery manufacturer: Midac Aquamatic Battery type: PzS Battery year of manufacture: 2026 Battery condition: New Description: Start via key switch, standard version, battery removal from above, lifting frame protection made of wire mesh, 1-function hydraulic valve, proportional lifting/lowering control on the tiller head Full free lift, CE certificate.

Condition: new, functionality: fully functional, machine/vehicle number: D456T10386A, Year of construction: 2026, load capacity: 1,200 kg, lifting height: 4,340 mm, free lift: 1,418 mm, fuel type: electric, mast type: triplex, construction height: 1,950 mm, fork length: 1,150 mm, empty load weight: 1,005 kg, total length: 1,933 mm, drive type: Elektro, construction width: 790 mm, High-lift pallet truck Chassis number: D456T10386A Load center: 600 Fork width: 185 mm Fork thickness: 55 mm Mast type: Triplex Condition: New unit Technical condition: New Front tire type: Vulkollan Cgjdpfxsyng Ipj Ailjw Front tire size: 230 x 70 Front tire condition: New Rear tire type: Polyurethane Rear tire size: 85 x 100 Rear tire condition: New Battery voltage: 24V Battery capacity: 210Ah Battery manufacturer: Midac Aquamatic Battery type: PzS Battery year of manufacture: 2026 Battery condition: New Description: Start via key switch, standard version, side battery removal, wire mesh mast protection, 1 function hydraulic valve, proportional lift/lower control on the drawbar head. Full free lift, CE certified.

Condition: new, functionality: fully functional, machine/vehicle number: D456T10384A, Year of construction: 2026, load capacity: 1,600 kg, lifting height: 4,620 mm, free lift: 1,518 mm, fuel type: electric, mast type: triplex, construction height: 2,050 mm, fork length: 1,150 mm, empty load weight: 1,330 kg, total length: 2,005 mm, drive type: Elektro, construction width: 790 mm, High-lift pallet truck Chassis number: D456T10384A Load center: 600 Fork width: 185 mm Fork thickness: 55 mm Mast type: Triplex Condition: New unit Technical condition: New Front tire type: Vulkollan Front tire size: 230 x 70 Front tire condition: New Rear tire type: Polyurethane Rear tire size: 85 x 100 Rear tire condition: New Cgodpfxoyng N Ts Ailjw Battery voltage: 24V Battery capacity: 315Ah Battery manufacturer: Midac Aquamatic Battery type: PzS Battery year of manufacture: 2026 Battery condition: New Description: Start via key switch, standard version, battery removal from above, lifting mechanism protection made of wire mesh, 1 hydraulic valve function, proportional lifting/lowering control at the tiller head Full free lift, CE certificate

Year of construction: 2002, condition: excellent (used), functionality: fully functional, Continuous Wire Mesh Belt Dephosphating & Washing Machine Manufacturer: Aquaflot s.r.o. Year of Manufacture: 2002 Condition: Available for inspection We are offering a well-maintained continuous wire mesh belt dephosphating and washing machine, suitable for cleaning and surface treatment of steel components prior to heat treatment, coating, painting, or assembly operations. Key Features - Continuous operation with wire mesh belt conveyor - Designed for dephosphating and washing processes - Suitable for medium to high production volumes - Robust industrial construction - Easy integration into existing production lines Codpfxszf Hmro Ailogw - Reliable and proven technology Applications - Automotive components - Fasteners and fixing elements - Forged and machined parts - Heat treatment preparation - General metal finishing operations The machine is currently available and can be inspected by appointment. Additional technical information, dimensions, photographs, and videos can be provided upon request. Location: Germany Delivery Condition: Ex Works (EXW) Contact: Fornax Machinery GmbH Please contact us for further details and pricing.

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 2454320049, overall weight: 130 kg, total width: 660 mm, total length: 660 mm, total height: 980 mm, power: 1.5 kW (2.04 HP), input voltage: 230 V, cutting width (max.): 420 mm, Cardboard shredder for recycling cardboard and producing void fill material (cardboard mesh). Includes AL-KO extraction unit. Easy adjustment of the cardboard mesh width via a movable stop. Regardless of the width of the cardboard to be shredded, cardboard mesh of uniform width is always produced. Cgjdpoy Dqvdefx Ailjw

Condition: new, Year of construction: 2023, External overall dimensions: 240x600cm Height: 520cm Drainage with PVC: pipes in the columns Anchoring: Yes Walls: PU 40mm – RAL 7016 outside / 9002 inside Floor: metal mesh (reinforced) Hydrophobic plywood, Betopan in sanitary facilities Laminate floor, tiles with base Cgsdom Dr Ukspfx Ailsw External doors: aluminum, 1 piece 90×190 sealed, with threshold 2 pieces 70×190 sealed, with threshold Inner Door: Aluminum, white 1 piece 90×190 tight, no threshold Windows: PVC, RAL color 1 piece 80×113 2 pieces 100×113 Electrical: 32A EU external power connection One-shoulder metal staircase with a width of 90 cm + railing

Condition: used, all stainless steel 3 tiers Cedpfx Aszc I H Nsilsgw nett belt length ± 5.800 mm nett belt width ± 940 mm stainless steel mesh wire belt outside dimensions (l x w x h) : ± 7.200 x 1.400 x 2.900 mm + Evaporator "Goedhart B.V." Type LLK.s 411m² manufacturing number: PJV100282 Year of manufacture: 2010 Capacity: 135 dm³ Refrigerant: NH3 Weight: 770 kg, Working pressure: 22 bar Test pressure: 32 bar Overall dimensions including cooling panels and stainless steel door: 7.500 x 2.700 x 3.300 mm

Condition: used, net cooking length ± 12.500 mm Codpfx Aozc E Speilogw belt width ± 700 mm all stainless steel with 2 hoists 16 fans infeed conveyor outfeed conveyork washing system (conveyor) suitable for steam heating max. product height : ± 180 mm dimensions (l x w x h) : ± 14.600 x 2.400 x 4.400 mm adjustable speed 120 kW infeed height: ± 1.000 mm outfeed height: ± 1.000 mm cooking time min/max : 3-18 min mesh wire belt Simatic S7 Text display OP 17 electric power : 26 kW 400V

Condition: used, mileage: 55,315 km, power: 210 kW (285.52 HP), fuel type: diesel, gearing type: automatic, first registration: 01/2022, next inspection (TÜV): 01/2025, color: beige, number of seats: 5, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), immobilizer system, navigation system, parking heater, soot filter, Mileage varies, vehicle is still in use----Special equipment: Roof rails, Black Style Design Package, Plus Driver Assistance Package, fire extinguisher, head-up display, Innovision Cockpit (digital instruments and operation via touchscreen color display), Climatronic 4-zone air conditioning, Comfort Package Keyless Access, Savona leather package and ErgoComfort front seats, LM wheels 9.5x21 (Suzuka, black), electronically controlled air suspension with adaptive roll stabilization, Matrix LED headlights (high-tech), Premium Memory Package, Mobile Online Services Car-Net, front panoramic sliding/tilting sunroof electric, with rear panoramic roof, smoker's package, tire pressure monitoring system (regular and winter tires), laminated glass side and rear windows, rear tinted, front seats with climate and massage function, special paint Sechura Beige Metallic, sunshade blinds on rear door windows, auxiliary heater with auxiliary ventilation (remote control and timer), variable load floor, additional winter tires (customer specification required) Other equipment: Cornering and all-weather lights / bad weather lights, driver/passenger airbag, deactivatable passenger airbag, white ambient lighting, Discover Premium audio navigation system (with hard drive storage), R-Line equipment, automatic headlight control (ALS) with leaving home/coming home light function, exterior mirrors electrically adjustable, heated and foldable, roof lining fabric, black, double sun visors with mirrors (illuminated), double-tone horn, assistance system: automatic distance control (ACC incl. stop & go function), assistance system: driving profile selection, assistance system: high beam control (Light Assist), assistance system: pedestrian recognition, assistance system: fatigue detection sensor, assistance system: park assist (Park Assist), assistance system: lane keeping assist (Lane Assist), assistance system: environment monitoring system (Front Assist) with city emergency braking function, assistance system: traffic sign recognition, electric windows front and rear, front camera (multifunction camera windshield), laminated glass windshield tinted, textile floor mats, vehicle without hybrid, enlarged urea tank (AdBlue), interior trim: aluminum wave inserts, interior filter: dust and pollen filter with activated carbon filter, Isofix mounts for child seats in rear seats (incl. i-Size child seats), body: 5-door, front and rear head airbag system incl. front side airbag, loading edge protection (stainless steel), speakers (8), lumbar supports front, electrically adjustable, heated steering wheel (leather, R-Line) with multifunction and shift function, rear center armrest, engine 3.0 liters - 210 kW V6 TDI, rear fog light, emergency call system, electric parking brake, stainless steel pedals, R-Line, R-Line package, radio reception digital (DAB+), wheelbase 2904 mm, tire repair kit, tire pressure display, rear view camera (Rear View), rear seat split/foldable and slidable, low-emission according to Euro 6d emission standard, heated washer nozzles, SCR system (AdBlue technology), front side airbag, rear outer seat belts with belt tensioners, front seat belts with belt tensioners, height adjustable, front seats electrically adjustable, front ErgoComfort seats, front seats height adjustable, front seat heating, differential lock, start/stop system, R-Line bumpers, lower door trim in body color, exterior door handles in body color, first-aid kit and warning triangle, seat Cgsdsvht Tnopfx Ailew

Condition: like new (used), Year of construction: 2011, Retrofitted: 2026 Numerical control: HEIDENHAIN TNC-i530 Technical features Dimensions Table dimensions: 10000 x 2250 mmNumber of T slots: 9T slots dimensions: 22 mm Traverses of axis X axis traverse: 10000 mmY axis traverse: 1500 mmZ axis traverse: 2500 mmVertical capacity (VC): 150 - 2650 mm  (adjustable) Milling head Head type: Universal Auto-indexing UDG (2.5º)Tool clamping system: HydraulicTaper nose: ISO 50 (DIN 69871) / Pull stud: DIN 69872Speed range: 3000 rpmSpindle power: 30 kW Feedrates Rapid feedrate (X / Y,Z): 30000 mm/min Weight and dimensions Maximum weight on table: 15 Tn/m2Machine weight approximate: 56000 kgMachine dimensions approximate: 16520 x 8575 x 5290 mm Accessories Guarding: front sliding doors and new perimetral wire-mesh fenceAutomatic tool changer: ATC40Chip conveyor: 1 longitudinal rear hinge typeElectronic handwheel: HR-410Coolant: external internal high-pressure coolant through spindle Sale conditions Warranty: 6 months mechanical partsPrice and sale conditions: On request View all technical features Cgsdpfx Aozcz Sroilow

Condition: used, mileage: 204,947 km, power: 55 kW (74.78 HP), first registration: 03/2005, fuel type: gasoline, overall weight: 2,150 kg, next inspection (TÜV): 11/2026, color: white, gearing type: mechanical, emission class: euro4, number of seats: 2, Year of construction: 2005, Equipment: ABS, central locking, VW Caddy Panel Van, 2nd owner, regularly serviced, MOT until 11/2026 Special features: Rear window wiper, high cargo area partition (mesh), seat covers/upholstery: artificial leather Additional equipment: Driver's airbag, traction control (ASR), aspherical exterior mirror (left), front floor covering (rubber), rear wing doors with glazing, body type: panel van, child safety locks in passenger compartment, headlamp beam adjustment, engine 1.4 ltr. - 55 kW 16V, rear fog lamp, wheelbase 2682 mm, spare wheel with standard tyres, right sliding door, side protection strips, steel wheels 6x15, heat-insulating green-tinted windows, etc. Appointments and test drives by prior telephone arrangement. Cjdex Tb Ddopfx Ailogw The information provided online are non-binding descriptions and do not constitute warranted characteristics. The seller is not liable for typographical or data transmission errors. Errors and prior sale excepted.

Condition: used, mileage: 230,823 km, power: 75 kW (101.97 HP), first registration: 12/2014, fuel type: diesel, overall weight: 2,310 kg, next inspection (TÜV): 11/2026, color: white, gearing type: mechanical, emission class: euro5, number of seats: 2, Year of construction: 2014, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, * German vehicle from first owner, good condition * Trailer hitch * Bott workshop installation * Long version Cgedpox Ntv Refx Ailew * Manual transmission * Electric windows * Heated and electrically adjustable mirrors * Timing belt replaced * COC (Certificate of Conformity) available * I am happy to send you a video via WhatsApp * WhatsApp: * Contact polski, ????? ?????: * Sale to business customers only, no warranty, all information subject to change, prior sale reserved Special equipment: Audio system RCD 210 MP3 (radio/CD player), passenger/cargo area floor covering (rubber), front floor covering (carpet), lockable and illuminated glove compartment, rear wing doors with glazing, high cargo partition with mesh (plastic), spare wheel in operational condition (steel), seat cover/upholstery: robust seat covers Further features: Driver's airbag, traction control (ASR), left exterior mirror aspherical, exterior mirrors electrically adjustable and heated, right exterior mirror convex, brake assist, EcoProfi, electronic differential lock (EDS), laminated windshield, vehicle without start/stop system, interior filter: dust and pollen filter, body/construction: panel van, steering column (steering wheel) mechanically adjustable, height/length adjustment, center console, engine 1.6 L - 75 kW TDI, non-smoker package, wheelbase 3006 mm, low emissions according to Euro 5, sliding door right, driver's seat height-adjustable, steel rims 6x15, first aid kit and warning triangle, heat-insulating glass, green-tinted

Condition: new, max. tool diameter 400 mm 0 180 mm operating pressure 2 bar ROTATHERM chamber washing systems are used in all areas of industry and Craftsmanship for cost-effective cleaning of a wide variety of items to be cleaned and materials used. The parts are cleaned like in a dishwasher. Inserted into one Wire mesh basket they are in the closed device with a hot Lye shower washed from all sides. The machine will be selected after the Temperature and washing time set in operation. A centrifugal pump promotes the Washing water circulates to the nozzle system, which at the same time moves the basket in offset rotation. (Optional electric basket drive) After the cleaning process is complete, the device switches off automatically. the Parts can also be removed beforehand. In this case, when lifting the the pump is automatically put out of operation. ROTATHERM chamber washing systems are available in various sizes and at short notice Designs are available and can be requested on special claims be modified. As a rule, water-based cleaners are used deployed. But solvents are also used in ours cleaning machines. If necessary, the systems can be ex-protected version are delivered. Technical details EMSA ROTATHERM Mini: ----- Basket diameter: 400 mm Usable height: 180 mm Load capacity: 50kg Spray pressure without / with filter: 1.5 / 2.3 bar Circulation volume: 2.5 m³/h Tank capacity: 35 l Heating power: 2 kW Connected load: 2.5 kW Voltage: 220/230V Frequency: 50Hz Dimensions ----- Depth: 530mm Width: 650mm Height: 630mm Weight: 48kg ----- Price of the basic machine in the above design: On request! ----- Accesories: ----- Order No.: 1.521 Raised lid/max. Tool length 310 mm Order No.: 1.522 HSK 63 F tool holder for changing with basket Order No.: 1.523 HSK 63 E tool holder for changing with basket Order No.: 1.524 Tool holder for Weinig Powermat to change with basket Order number: 2.006 small parts basket, Order number: 1.504 filter system (0.08m²), Order number: 1.510 pressure gauge, Order No.: 1.511 Electromotive basket drive, Order number: 1.512 mobile frame, Order number: 1,513 rolls, Cedpfx Aisyrtytolsgw Order number: 1.514 suction device, Order number: 1.516 oil separator / belt skimmer, Order number: 1.518 system completely in stainless steel, Order number: 1.519 nozzles in stainless steel, ----- Price on request The ROTAHTERM tool washing machine is also available in larger versions Standard, Maxi and XL available. All devices are also available in special voltages. Surcharge on request. When ordering accessories, the specified technical data and possibly the delivery time! The values ??given are guide values. Construction changes reserved. Delivery time: short term and after Agreement. All prices ex works plus packaging, transport, insurance and legal VAT. (technical information according to the manufacturer - without guarantee!)

Condition: like new (used), functionality: fully functional, Year of construction: 2025, The system was manufactured for a customer project but was not put into operation due to a subsequent change in the installation requirements. The conveyor belt is in new condition and is immediately available. This provides the opportunity to purchase the system at a significantly lower price than the new price. Aluminum angle conveyor with substructure, including adjustable feet and machine feet for leveling uneven surfaces. Horizontal section: 750mm Rising section: 2,300mm Inclination angle at the bend: 60° Height of the horizontal section: 250mm Conveyor belt length measured on the floor: 1,900mm Discharge height: 2,200mm Design: Aluminum construction - 2x profile reinforced 90x45mm - Full-surface wear plate, 2.0mm, galvanized Drive roller + deflection roller, S235 steel, welded and machined Ø100x520mm, crowned, shaft fixed with tension bearings Drive: Gearmotor, 0.55KW, speed 0.53m/sec Connection 230/400V, 50Hz, protection class IP54 Drive ready for connection up to the motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU including wave edge PU petrol matte Conveyor belt width: 500mm 2 pieces of wave edges, 50mm high, 25mm wide, high-frequency welded 21 pieces of T-40 studs, 300mm long, approx. 300mm spacing Belt material: 2-layer, particularly dimensionally stable in the transverse direction In the bend area, the belt is guided on both sides with 2 pressure rollers each. The belt is designed with a border-free zone of 70mm on both sides. Due to the wave edge on both sides, the usable width of the conveyor belt is reduced: Usable width: 300mm, as follows: Cgodpfszfi A Asx Ailjw (Top view) Transverse arrangement: 70+25+5+300+5+25+70mm Belt guidance via PVC wedge strip on the running surface, profile - 10x6mm - Including recess in the wear plate - Including sliding joints in the drive and deflection roller Inspection possible after consultation Price is net, plus 19% VAT.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Detailed description For sale: complete aisle Automated Storage and Retrieval System (AS/RS) (Knapp) Ideal lot for integrators and logistics companies wishing to increase their automated storage capacity. Sold as is, complete lot ready for installation. Less than 100 operating hours! Lot contents: • 10 OSR units (Knapp shuttles) – shuttles for automated storage and handling • 2 lifts (for level connection) • Infeed and outfeed conveyors included (for easy integration into the existing flow) • 2,200 SILVERLINE plastic bins, European standard (or equivalent) + dividers included • Ladders, rails, and crossbars for racking (structural elements for storage) • Protective mesh (production) • No picking stations included Condition: equipment very little used. Inspected and functional. Sold as is. Numerous spare parts available! Delivery and installation possible, please contact us! No control system or installation service (software) provided. Advantages: • High automated storage capacity (2,200 bins) • Modular Knapp OSR solution, compatible with modern automated environments • Conveyors included to facilitate the integration of flows Cgedpfx Aisxtfa Helow Price: €340,000.00 excluding VAT (complete lot). ⚠️ Important: ISC Recycle only handles the sale of the equipment. No integration or commissioning services are offered.

Condition: like new (used), Year of construction: 2013, Retrofitted: 2026 Cjdpfsyf Rraox Ailegw Numerical control: HEIDENHAIN TNC-i530 Technical features Dimensions Table dimensions: 12500 x 2250 mmNumber of T slots: 9T slots dimensions: 22 mm Traverses of axis X axis traverse: 11500 mmY axis traverse: 1500 mmZ axis traverse: 2000 mmVertical capacity (VC): 150 / 2150 mm (adjustable) Milling head Head type: Universal Auto-indexing UDG (2.5º)Tool clamping system: HydraulicTaper nose: ISO 50 (DIN 69871) / Pull stud: DIN 69872Speed range: 3000 rpmSpindle power: 30 kW Feedrates Rapid feedrate (X / Y,Z): 30000 mm/min Weight and dimensions Maximum weight on table: 15 Tn/m2Machine weight approximate: 62000 kgMachine dimensions approximate: 18494 x 8412 x 5290 mm Accessories Guarding: front doors and new perimetral wire-mesh fenceAutomatic tool changer: ATC40Chip conveyor: 1 longitudinal rear hinge typeElectronic handwheel: HR-410Coolant: external internal high-pressure through spindle Sale conditions Warranty: 6 months mechanical partsPrice and sale conditions: On request View all technical features

Condition: ready for operation (used), Year of construction: 2010, operating hours: 15,043 h, laser power: 3,600 W, travel distance X-axis: 6,500 mm, number of axes: 5, This TRUMPF TruLaser Tube 7000 KT02 was manufactured in 2010. It features a working area of 6500 mm on the X-axis and can handle circular diameters up to 200 mm. Equipped with a CO₂ laser TruFlow 2000 and a laser cutting head with a 155 mm lens, it's ideal for precise tube cutting. Contact us for more information about this machine. • Circular diameter: 200 mm • Reject station: 3 m with brush table • Reject tray • Working Range X Tube Axis: 6500 mm • Outer Circle Diameter: 254 mm (Upgraded from standard 200 mm) • Unloading Station: 3 m with brush table, front unloading • Laser Type: CO2 Laser TruFlow 3600 including LensLine (Surcharge upgrade from standard TruFlow 2000) • Control: Sinumerik 840D, Teleservice Cgodpfxex D I H Do Ailsw • Standard Software/Features: NitroLine, FocusLine, SprintLine, Laser power control, Programmable cutting gas pressure, Program re-entry, Automatic shutdown, Workspace lighting, Laser logbook function, Laser cooling unit • Laser: CO₂ laser TruFlow 2000 • Laser cooling unit • Cutting Head: Lens cutting head with 155 mm focal length, ControlLine • Control unit: 84D • Connectivity/data transfer: RJ-45 network connection, USB connection; network connection incl. installation • Safety: CE marking, Multi-beam light barriers, Compact dust extractor 1500 Nm³/h, Protective cabin with Makrolon panels • Ambient Operating Temperature: Up to 43°C • Installation Type: Special machine installation setup Additional equipment • Accessories: • Spare parts case for cutting heads • 1 x remote control kit • Clamping jaw set Ø 16 / 200 mm • U-shaped guide rails for reject station with ID = 200 mm • Automation: • Loading Unit: LoadMaster Tube 6.5 m with bundle support, 2 grippers, 254 mm outer circle diameter capacity, low-scratch design for 6m, swiveling conveyor line, additional gripper D=254 mm • Options for LoadMaster Tube 6 m: • Circular diameter 250 mm • Shorter belt support • Swivelable conveyor section • Additional gripper Ø 200 mm • Additional gripper Ø 250 mm • Special equipment: • Flexible reject station 4.5 m (prototype) instead of reject station 3 m, without brush table • Special installation for flexible reject station • LoadMaster (series version 103) • Installation 100 mm higher (use of wire mesh container possible), decision upon acceptance • Services: • Installation, commissioning, training

Condition: new, empty load weight: 360 kg, maximum load weight: 1,640 kg, overall weight: 2,000 kg, axle configuration: 2 axles, loading space length: 2,545 mm, loading space width: 1,510 mm, loading space height: 400 mm, total length: 1,640 mm, total width: 1,110 mm, total height: 3,810 mm, suspension: steel, tire size: 165R13C 96/94N, construction height: 1,110 mm, Multi-purpose trailer prepared for transporting various types of material. Wheels under the transport surface The transport surface is wider and set higher than in other luggage trailer series, making manual loading and unloading easier. All side walls are removable, so the load can be loaded freely, e.g. with a forklift truck. Underframe made of structural steel, closed profile, bolted. Floor made of high-quality, waterproof and non-slip plywood. Possibility of attaching high welded steel mesh walls. | HIGH LOADER + 250/2 2T | Steel frame | Dimensions of loading area: L: 2.54m W: 1.51m Height of side wall: 0.40m | 8 lashing rings (4 left, 4 right) recessed in the floor | Knott axle with drum brake | Leaf spring suspension | Operating voltage 12V | Spindle parking brake | Front railing | Spare wheel on front wall | Errors, input and advance sales reserved. Cgodeu R D Skepfx Ailjw

Condition: good (used), mileage: 226,760 km, power: 169 kW (229.78 HP), first registration: 06/2014, fuel type: diesel, fuel: diesel, color: blue, driver cabin: day cab, gearing type: automatic, emission class: euro6, Year of construction: 2014, Equipment: AdBlue, crane, differential lock, electric window regulation, trailer coupling, = Additional options and accessories = - Rear work lights - Radio/CD player - Windscreen = Notes = Internal reference for inquiries: 6-083 Used vehicle Mercedes-Benz Atego 1223 4x2 with flatbed body and ATLAS 65.2 loader crane mounted at the rear. Includes ATLAS (HBC) cross-lever remote control. From first owner!!! Cedpfxey Au E To Ailjgw Immediately available!!! Flatbed surface with phenolic plywood platform. Platform dimensions: 5100 x 2270 x 800 mm Headboard at cab height with mesh for orientation, as the cab has a rear window. 45° external frame with numerous lashing points MOT valid until October 2026 Safety inspection valid until April 2026 For the crane's lifting capacity, please refer to the attached load charts. For further questions, our sales team will be happy to assist you. This is a non-binding offer. Subject to prior sale, errors and changes. = Additional information = Axle configuration Front axle: steered Rear axle: differential lock Weights Unladen weight: 7,510 kg Payload: 4,480 kg Gross vehicle weight: 11,990 kg Functional Crane: Atlas 65.2, mounted at the rear of the chassis Maintenance MOT (Main technical inspection): valid until 10/2026 Condition Technical condition: good Visual condition: good Damages: none

Condition: used, 900 units. Shelf inserts for 110 cm deep shelving, used 🧰 Product features • Condition: very good, see photos • Color: galvanized • External dimensions: 178.5 x 107.5 x 4.5 cm • Internal width: 99.8 cm Cgsdpfxozd Tqhj Ailjw • Load capacity: 250 kg / m² • Weight: approx. 40 kg • Mesh size: 4.3 x 9.7 cm 💰 Price: €42,- net, excluding VAT • Quantity discount: available upon request • Shipping costs: available upon request, throughout Europe • Delivery time: immediately available • Inspection and collection: possible at any time by arrangement • Product number: P10440 We constantly have over 5000 linear meters of pallet racking in stock from various manufacturers. (Subject to changes and errors in technical data, information, and prices, as well as prior sale! See our general terms and conditions; all prices are excluding VAT, ex warehouse.)

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, 12 months warranty, demonstration unit, very good condition, only approximately 250 operating hours, available for immediate delivery. - Complies with DIN EN 1539 for solvent-containing substances - Maximum temperature: 300 °C - Oven chamber: 750 x 750 x 750 mm (W x D x H) - External dimensions: 1510 x 1150 x 2200 mm (W x D x H) - JUMO dTRON 04 temperature controller - Maximum permissible solvent quantity: 19.30 g - Heating power: max. 21.78 kW, connected load 22.5 kVA, rated current 32.6 A - Connection: 400V 3-phase/PE 50Hz - Cable with 63A plug, also possible as a fixed connection, in which case fuse with 35 or 50 A - Incl. 1 grid insert - Weight 550 kg Cedpeiq Uv Njfx Ailjgw - Documentation Inspection in our warehouse by appointment. Oven, industrial oven, convection oven, chamber convection oven, annealing oven, heating oven, drying oven, temperature oven, paint drying oven, solvent oven

Condition: used, The GEA oil fryer is used for flash or deepfrying coated and uncoated products. It is suitable for meat, fish, poultry, cheese, vegetables, potatoes and vegetarian dishes. all stainless steel nett belt length 3.000 mm nett belt width 400 mm mesh width ± 10 mm suitable for thermal oil heating (= 115 kW) oil circulation pump level control adjustable speed Cgodozb Elmspfx Ailjw infeed conveyor outfeed conveyor sediment removal system lifting unit with mechanical hoists suitable for fire protection overall dimensions (l x w x h) : ± 5.200 x 1.700 x 3.100 mm

Condition: used, Year of construction: 2021, operating hours: 3,304 h, functionality: fully functional, Basic Package AK 640 SA Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm Semi-trailer chassis with 3 axles, road approval for 80 km/h Brake system incl. ABS and lighting according to EU directive Tyres 385/65 R22.5 Permissible total weight 32,000 kg Hydraulically adjustable support legs Splash protection (internal and lateral mudguards) Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm, complies with EUROMOT V emission standard Cedpfx Aiexx Tigelegw Additional hydraulic connection 20 l/min Load-dependent control of material feed incl. automatic scraper floor reversal Separate drive for feed roller and scraper floor (twin drive) Fuel tank 2 x 450 litres Feed roller: length 1,690 mm, diameter 510 mm, with attached tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: Flail tip "Streusel plus" Impact plate with teeth Centrally positioned wear strips Electric pump for actuating cylinder functions (e.g., raising/lowering support legs and opening/closing rear hopper, folding/unfolding rear conveyor, releasing drive system) when the engine is off 24 V electrical control Separate control box at rear of machine Hydraulically foldable fine shredding basket Multimesh (mesh size from 30 to 280 mm, gradations upon request) incl. one-piece rear flap Rear conveyor: belt length 7,500 mm, belt width 1,500 mm, discharge height 5,200 mm, hydraulically foldable and lowerable from 39° to 30°, incl. anti-magnetic central section Under belt: belt length 3,800 mm, belt width 1,400 mm Moistening device for external water connection Scraper floor with 71 slats Wear protection in the drum section Reinforcement plates on the infeed hopper (wear-resistant steel) on both sides for side wall Complete radio remote control Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paintwork: RAL 2011 deep orange Additional Equipment: Hydraulic drive Scraper floor chain lubrication NEODYM overband magnet Frame for overband magnet Central lubrication Engine compartment protective plate Lighting package: engine compartment and rear conveyor Watering system Delivery date to be arranged Available from 06/2026

Condition: used, Year of construction: 2022, operating hours: 4,561 h, functionality: fully functional, Basic Package AK565: Central axle trailer chassis with 2 axles, road approval for 80 km/h Brake system incl. ABS and lighting according to EC directive 50 mm EC drawbar eye incl. slip-on coupling Tyres: 385/65 R22.5 Hydraulically adjustable support leg Splash guards (inner and side-mounted fenders) Permissible total weight: 19,000 kg MTU diesel engine 6R1300, 390 kW at 2,000 rpm, complies with EUROMOT V emission standard Cgodpfx Aioyhckmolsw Exhaust discharged upwards Load-dependent material feed control incl. automatic reversing of scraper floor Fuel tank, 450 L Feed roller: length 1,690 mm, diameter 510 mm, fitted with bolt-on tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips - Dopplock system Standard: Flail tip “Streusel plus” Centrally arranged lubrication strips Electric pump for operating cylinder functions (e.g. raising/lowering the support leg and opening/closing the rear basket, folding/unfolding the rear conveyor, releasing the drive) when engine is stationary 24 V electrical control system Separate control panel at the rear of the machine Hydraulically folding fine shredding basket “Multimesh” (mesh sizes between 30 - 280 mm, gradations on request) incl. one-piece rear flap Scraper floor with 32 slats Chain drive for feed roller and scraper floor Complete radio remote control Drive preparation Rear discharge conveyor, 4 m long, 1,800 mm wide “classic” Anti-magnetic centre section on the discharge conveyor Reinforcement plates (Hardox) on both sides of feed hopper sidewall Fire extinguisher Acoustic start-up warning Doppstadt telematics system Finish: RAL2011 deep orange Optional Equipment: Hydraulic drive 600 L fuel tank Flail tip C1 “Bear Paw” with carbide insert Rear discharge conveyor 4 m, belt width 1,800 mm, lowerable Neodymium magnetic pulley incl. chute Separate drive for feed roller and scraper floor (“Twin Drive”) Duomatic coupling Smooth impact plate Fine shredding basket Delivery date by arrangement

Condition: used, Year of construction: 2006, Overview This Octopus 1800 BFTS ring pallet wrapper, manufactured in 2006, is designed for the automatic wrapping of palletized goods with stretch film. The machine is built as a ring-style wrapping system, where the film carriage rotates around the palletized load while the pallet is transported through the machine on integrated roller conveyors. The system is suitable for high-capacity end-of-line pallet wrapping in beverage and packaging lines. It is installed in a fully enclosed safety area with steel mesh guarding, access gate, operator control box and emergency stop. The machine was observed in an industrial palletizing area connected to conveyor and pallet transport systems. Operation is managed via a Siemens SIMATIC Panel. Technical Data - Manufacturer: TW Mima Packaging Systems / Oy M. Haloila Ab - Model: Octopus 1800 BFTS - Machine Type: Automatic ring pallet wrapper - Year of Manufacture: 2006 - Application: Stretch wrapping of palletized goods - Wrapping System: Horizontal ring wrapping system - Product Transport: Integrated motorized roller conveyor - Electrical Supply: 3 x 400 V - Operating Current: 20 A - Control Interface: Siemens SIMATIC Panel - Conveyor System: Roller conveyor through wrapping area - Construction: Heavy-duty steel gantry frame with yellow ring wrapping assembly - Location in Line: Palletizing / end-of-line packaging area - Condition: Used, installed in industrial production environment Cgjdpfx Aijzb Azfslow