Used Mep Ph 100 for sale (144)

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, cutting height (max.): 280 mm, cutting width (max.): 330 mm, saw band length: 3,650 mm, saw band speed: 1,667 mm/s, saw band width: 27 mm, TECHNICAL DETAILS Saw blade dimensions: 3,650 x 27 x 0.9 mm Speed: 15/100 m/min Cutting capacity at 90° round: 280 mm Cutting capacity at 90° square: 260 mm Cutting capacity at 90° flat: 330 x 260 mm Cutting capacity at 45° round: 260 mm Cutting capacity at 45° square: 250 mm Cutting capacity at 45° flat: 270 x 200 mm Cutting capacity at 60° round: 180 mm Cutting capacity at 60° square: 170 mm Cutting capacity at 60° flat: 170 x 170 mm MACHINE DETAILS Total power requirement: 2.2 kW Weight: 1,240 kg Vise: 340 mm Dimensions: 2,020 x 2,040 x 1,740 mm Kjdpfx Abozaptrjfsdn EQUIPMENT - Roller conveyor 2,000 mm

Condition: ready for operation (used), functionality: fully functional, saw blade diameter: 350 mm, overall weight: 480 kg, rotational speed (min.): 15 rpm, rotational speed (max.): 90 rpm, input voltage: 380 V, 3-phase 400V, 2-speed motor is running smoothly! Geared head with 4 speeds. 15, 30, 45, and 90 RPM. Quick clamping mechanism. Brand new, original MEP clamping jaws. Emergency stop. Coolant pump located in the machine base. Mitre cuts are possible. Square cutting capacity: 95x95mm. Maximum saw blade diameter: 350mm. Includes 2 x 350mm saw blades. Made in Italy. Weight: 480 kg. Kdjdpozawmysfx Abfjn Contact us for shipping options! €2,000.00

Condition: reconditioned (used), Year of construction: 2015, Used automatic hydraulic band saw for metal MEP Shark 230 nc hs 5.0 Automatic auger chip remover Blade size: 2950x27x0.9 Choice of cutting speed with inverterr: from 15-100 m/min Capacity: round 230mm, square 230x230mm Kdodpfstva Nhjx Abfjn Year: 2015 Possibility of cuts also in semi-automatic mode The machine has been fully serviced, the following parts have been replaced: all bearings, reducers, both wheels (pulleys) leaf, hard metal plates in guides, main shaft, coolant pump, two jaws, coolant pipes,yojstick, fans and other consumables.

Condition: like new (used), Year of construction: 2019, operating hours: 1,750 h, functionality: fully functional, MEP Tiger 372 CNC LR 4.0 automatic metal circular saw (2019) Manufacturer: Mep Model: Tiger 372 CNC LR 4.0 automatic metal circular saw Year of manufacture: 2019 Condition: used, very good, inspected and cleaned Operating hours: 1750h Cutting range ROUND 0° 120 mm Cutting range ROUND 45° left 115 mm Cutting range ROUND 60° left 115 mm Cutting range ROUND 45° right 115 mm Cutting range SQUARE 0° 110 mm Cutting range SQUARE 45° left 100 mm Cutting range SQUARE 60° left 90 mm Cutting range SQUARE 45° right 100 mm Cutting range FLAT 0° 180 x 100 mm Cutting range FLAT 45° left 120 x 100 mm Cutting range FLAT 60° left 90 x 90 mm Cutting range FLAT 45° right 120 x 100 mm Kjdpfx Aoy S Ezwsbfedn Continuously variable speed 15 to 150 rpm Motor 5.5 kW Saw blade 370 x 32 mm Coolant system Length 2500 mm Width 1840 mm Height 1890 mm Weight 1060 kg Scope of delivery: – Documentation – 2 m feed roller conveyor – Machine lighting – Chip conveyor – Coolant system

Condition: like new (used), Year of construction: 2018, operating hours: 2,150 h, functionality: fully functional, MEP TIGER 372 CNC LR 4.0 metal circular saw + CB4001 magazine High-performance automatic CNC metal circular saw with microprocessor control for cuts from 45°right to 60°left. Manufacturer: MEP Type: TIGER 372 CNC LR 4.0 Year of manufacture: 2018 Condition: very good, little used Switch-on hours: 2128h Cutting time: 1738h Machine with microprocessor control and two CNC-controlled axes, which allow up to 300 cutting programs, each with its own number of pieces and length, with the same material or material on the CB4001 loading magazine. Cutting range ROUND 0° 120 mm Cutting range ROUND 45° left 115 mm Cutting range ROUND 60° left 115 mm Cutting range ROUND 45° right 115 mm Cutting range SQUARE 0° 110 mm Cutting range FOUR-EDGE 45° left 100 mm Cutting range FOUR-EDGE 60° left 90 mm Cutting area FOUR-SQUARE 45° right 100 mm Cutting area FLAT 0° 180 x 100 mm Cutting area FLAT 45° left 120 x 100 mm Cutting area FLAT 60° left 90 x 90 mm Cutting range FLAT 45° right 120 x 100 mm Infinitely variable speed 15 to 150 rpm Motor 5.5 kW Saw blade 370 x 32 mm Coolant system Length 2500 mm width 1840 mm Kodpfx Abjy S Ezqsfsdn height 1890 mm Weight:1060 kg Scope of delivery: - Original documentation - 4x saw blades

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 11900715/C, saw blade diameter: 350 mm, feed length X-axis: 180 mm, feed length Z-axis: 170 mm, total length: 2,210 mm, total width: 1,100 mm, total height: 1,550 mm, cutting range round steel at 90°: 120 mm, cutting range round steel at 45°: 120 mm, type of input current: three-phase, rotational speed (min.): 15 rpm, rotational speed (max.): 90 rpm, cutting height (max.): 170 mm, overall weight: 530 kg, saw blade speed: 90 rpm, input voltage: 400 V, cutting range square steel at 45°: 100 mm, cutting range square steel at 90°: 105 mm, saw drive: 2,200 W, cutting diameter: 120 mm, saw blade bore: 32 mm, 2000 MEP Cobra 350AX Automatic Circular Cold Saw – Efficient Metal Cutting for Industrial Production Available now: MEP Cobra 350AX, a robust automatic cut-off circular saw, perfect for industrial metal cutting applications. Manufactured in 2000 and in good working condition, this machine combines manual and automatic operation modes, adjustable cutting settings, and a 350mm blade to deliver consistent, high-quality cuts. 🔧 Key Features: Blade Size: 350 × 32 × 2.5mm Spindle Motor Power: 2.2kW Blade Speeds: 15 / 30 / 45 / 90 rpm Vice Opening: 160mm Clamping Type: Pneumatic Power Supply: 400V / 3 Phase / 50Hz Manual & Automatic Modes: Yes Cutting Depth & Stop Height: Fully adjustable Machine Weight: 530kg Dimensions (L×W×H): 2210 × 1100 × 1550mm 📏 Cutting Capacities: At 0°: Round: 120mm Rectangular: 180 × 170mm Square: 105 × 105mm At 45° Left: Round: 120mm Rectangular: 135 × 60mm Square: 100 × 100mm At 45° Right: Round: 110mm Rectangular: 135 × 60mm Square: 95 × 95mm ⚙️ Ideal Applications: Cutting steel profiles, tubes, bars Suitable for light to medium-duty industrial production Great for fabrication shops, stockholders, and manufacturing plants ✅ Why Choose the MEP Cobra 350AX? Versatile cutting angles and profiles Dual operation mode (automatic/manual) Compact, efficient, and easy to integrate into existing workflows Pneumatic clamping ensures safety and consistency Low investment cost means big savings on a high-value machine MEP Cobra 350AX for sale Used automatic circular saw Cold saw for metal cutting Pneumatic clamping cold saw 350mm circular saw machine Industrial metal cut-off saw MEP saw 2000 model Automatic metal saw Ireland Kdodpfxjwtr Iys Abfsn Circular saw for steel profiles 400V industrial cold saw Notes: *Specifications are given in good faith but not guaranteed*

Condition: good (used), Year of construction: 2021, MEP AVT400 Capping machine Serial: 271221 Kdjdpfx Aou S Rk Hebfsn 2021, Stainless capper, Robust and easy to use capping machine suitable for applying ROPP, screw caps onto bottles with screw thread necks. Max bottle diameter 195mm, max bottle height 355mm, Up to 400 - 600 bottles per hour, mobile, 1Ph

Condition: used, Multifunction Center Syntax 25 Working hours: 4900 h. Bar diameters: 8 – 25 mm 2 bars simultaneously: 8 – 16 mm Max. Bundle length: 12000 mm. Feeding speed: 3,2 m/s Bending speed: 1000 º/s Cutting time: 4/10 s Installed power: 31 kW Working hours: 4900 h. Bar diameters: 8 – 25 mm 2 bars simultaneously: 8 – 16 mm Max. Bundle length: 12000 mm. Feeding speed: 3,2 m/s Bending speed: 1000 º/s Cutting time: 4/10 s Installed power: 31 kW Kdjdpfx Abey Uhwmofsn

Condition: used, Year of construction: 1990, functionality: unexamined, total length: 1,050 mm, total height: 2,000 mm, total width: 1,800 mm, overall weight: 550 kg, space requirement height: 2,000 mm, space requirement length: 1,050 mm, space requirement width: 1,800 mm, -KOM 3178- Here, we offer a fully automatic metal saw from the manufacturer MEP. The saw is in good optical condition. In addition to the automated operation, the saw can also be operated manually. The maximum clamping width of the workpiece is approximately 150 mm. The recommended saw blade diameter varies, depending on the profile, between 315 and 350 mm. Kdodpsyykivjfx Abfsn Manufacturer: MEP Type: Tiger 350 AX Total weight: approx. 550 kg Space requirements: Width: approx. 1800 mm Height: approx. 2000 mm Depth: approx. 1050 mm

Condition: used, functionality: fully functional, saw blade diameter: 350 mm, total length: 2,720 mm, total height: 1,740 mm, total width: 1,460 mm, overall weight: 560 kg, Automatic Metal Circular Saw MEP COBRA AX • Cutting angles: 90°, 45° left, 45° right • Cutting capacity (90°, round tube): 105 mm • Cutting capacity (90°, rectangular tube): 180×70 mm • Cutting capacity (45°, round tube): 105 mm • Cutting capacity (45°, square tube): 95 mm • Cutting capacity (45°, rectangular tube): 135×60 mm • Saw blade diameter: 350 mm • Saw blade bore: 32 mm • Automatic lubrication • Operation modes: manual or automatic • Pneumatic material feed • Total power requirement: 2.29 kW • Dimensions (L x W x H): approx. 2720 x 1460 x 1740 mm • Machine weight: approx. 560 kg Kjdpsy Rmcasfx Abfodn Description: For sale is a bandsaw / metal bandsaw in good used condition. The machine operates flawlessly and is ready for immediate use. Upon request, we can provide a video demonstrating the machine in operation. Location: D-89350 Dürrlauingen Price: €1,450 EXW The saw is sold under the margin scheme according to § 25a UStG – therefore, VAT will not be shown separately. Delivery can be arranged within a radius of up to 400 km by agreement. If you are interested or have any questions, please feel free to get in touch. Viewing by appointment is possible.

Condition: as good as new (ex-display), Year of construction: 2024, type of input current: DC, cutting height (max.): 285 mm, cutting range round steel at 45°: 230 mm, cutting range round steel at 90°: 250 mm, saw band length: 2,950 mm, saw band width: 27 mm, Title MEP SHARK 282 CCS [with semi-automatic lowering] Article number SH282CCS Motor power 1.5/1.8 kW Belt opening 285 mm Belt dimensions 2950x27x0.9 mm Weight 440 kg Speed 36/72 m/min. Cutting surface 0° 250 / 220x220 / 280x220 Kodpfoy T N I Rox Abfodn Cutting surface 45° right 230 / 200x200 / 220x200 Cutting surface 45° left 200 / 170x170 / 200x140 Cutting surface 60° right 120 / 80x80 / 140x80 Cutting surface 60° left Description MEP sawing machine: Basic equipment: Vice with quick adjustment and adjustable guide rails Hydraulic band clamping device with clamping pressure indicator Underframe with removable coolant tray Chip clearing brush Adjusted precision stops for cuts of 0°, 45° and 60° left and 45° right Length stop for cuts of the same length Material support arm, simultaneous connection option for roller conveyor/loading side Turntable for double mitre cuts Machine is designed for pallet truck/forklift transport M2 bi-metal band saw blade for solid and profiled material Tools and operating instructions Electrical equipment: Control panel labeled cable connections Control lamp for operational readiness Main safety switch Emergency stop button Speed changeover switch Thermomagnetic protection Undervoltage release Control handle IP 55 protected Phase comparator Low voltage system 24 Volt Electrical coolant system 48 V (attachment of a micro-spraying device possible) Motor 1.5/1.8 KW 2 speeds 36/72 m/min. Vice opening 285 Saw band 2950 x 27 x 0.9 Weight 440 kg

Condition: good (used), Year of construction: 2004, Bandsaw in good condition + 2 extra new bandsaw blades. Kdsdpfx Abey Txb Tofsn

Condition: good (used), Year of construction: 2015, cutting range 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: square 250 mm capacity 60 degrees: round 180 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 180 mm automatic feeds 9999,9 mm Kdodpfx Aoy I Da Robfen feed minimum 2.0 mm cutting diameter minimum 5.0 mm band speed 15 - 100 m/min vice 340 mm Öffnung dimensions of saw-band 3650 x 27 x 0,9 mm Control MEP CNC total power requirement 2.2 kW weight 1240 kg range L-W-H 1800 x 1900 x 1750 mm actual NEW price about 23.000 Euro special price on request Equipment: - robust electro-hydraulic fully automatic band saw (INDUSTRY) - with additional semi-automatic function, for cuts from 0° to 60° left - WINDOWS “CE” based MEP 50 – control and 7” touch screen display * simple and quick setting of all machine parameters * with additional soft keys + backlit display * 10 programs, each with a maximum of 9999 pieces and . a maximum length of 9999.9 mm - material feed with stepper motor via ball screw * single stroke 600 mm repeatable to saw any length * accuracy of ± 0.1/600 mm - feeder with protective cover and safety limit switch - precise setting of the cutting feed with indication in mm/min - positioning of the saw head and movement of the feeder using a joystick - automatic detection of the start of the cut - large deflection discs, adjustable from cast steel - Saw blade tension with blade tension control and display - Hard metal blade guides for maximum cutting precision - Automatic monitoring of the cutting load - Vice with quick adjustment * with interchangeable clamping and stop jaws - Large, laterally extendable chip tray and coolant container * equipped with 2 electric pumps for lubricating and cooling the saw blade * Coolant gun for cleaning the machine - Chip removal brush for cleaning the saw blade - Operating instructions DE Information from the manufacturer: When installing this saw in a network with a residual current device (FI), this should be universally current sensitive and not less than 300 mA.

Condition: excellent (used), Year of construction: 2014, MEP Cobra 352 MA cold circular saw in very good condition. Year of manufacture: 2014 Kdjdpfxsyzbmne Abfen Shipping is possible.

Condition: new, dimensions of saw-blade 350x32x4 mm vice 180 mm 1700/3400 U/min capacity 90 degrees: round 120 mm capacity 90 degrees: square 105 mm Kjdpfx Ajy Dh Nnobfsdn capacity 90 degrees: flat 180x70 mm capacity 45 degrees: round 120/110 mm capacity 45 degrees: square 100/95 mm capacity 45 degrees: flat 135x60 mm output 2,2 kw weight 225 kg

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 60 degrees: round 180 mm capacity 60 degrees: flat 170 x 170 mm height of material-table 600 mm Pitch min/max 50.000 mm vice 335 mm Öffnung band speed 15 - 100 m/min automatic feeds 600 mm dimensions of saw-band 3650 x 27 x 0,9 mm Control MEP CNC total power requirement 2.2 kW weight 1.105 kg range L-W-H 3,3 x 2,83 x 2,23 m electro-hydraulic band saw fully automatic, with additional : Ksdpfxsxabavs Abfjdn * semi-automatic * semi-automatic-dynamic * manual .. operation Description: - robust electro-hydraulic band saw fully automatic (INDUSTRY) * MEP - WINDOWS numerical control unit * User interface with 7” touch screen display * mechanical buttons for the sawing machine’s operating functions * guarantees reliable operation, simple and intuitive * real-time control of all cutting parameters * pivoting arm enables comfortable and safe operation * display and recording of alarm and error messages - miter cuts with automatic cycle from 0° to 60° left - semi-automatic, semi-automatic-dynamic and manual cycle * miter cuts from 45° right to 60° left - manual or semi-automatic dynamic cycle selectable * to make cuts without programming - protective housing for the safety of the worker - continuous regulation of the cutting speed from 15 to 100 m/min * via frequency converter (inverter) - Latest generation hydraulic unit * extremely powerful with low energy consumption. - Material feed with stepper motor via ball screw * mounted on opposing ball bearings * Single stroke 600 mm repeatable to saw any length. - Positioning of the saw head and movement of the feeder using a joystick. - Automatic detection of the start of the cut position - Manually operated band tension control with indication on the display * using an electronic converter - Automatic monitoring of the cutting load * using a servo valve mounted directly on the cylinder - The coolant tray is built into the base frame - Chip removal brush - Bimetal saw band for solid and profile material - Tools and instructions for use with spare parts list * Angularity = 2/12 degrees * Length accuracy = plus/minus 0.1 mm per feed

Condition: new, cutting range 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: square 250 mm capacity 60 degrees: round 180 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 180 mm automatic feeds 9999,9 mm feed minimum 2 mm cutting diameter minimum 5 mm band speed 15 - 100 m/min vice 340 mm Öffnung dimensions of saw-band 3650 x 27 x 0,9 mm Control MPE CNC total power requirement 2,2 kW weight 1240 kg range L-W-H 1800 x 1900 x 1750 mm Equipment: - robust electro-hydraulic fully automatic band saw (INDUSTRY) - with additional semi-automatic function, for cuts from 0° to 60° left - WINDOWS “CE” based MEP 50 – control and 7” touch screen display * simple and quick setting of all machine parameters * with additional soft keys + backlit display * 10 programs, each with a maximum of 9999 pieces and . a maximum length of 9999.9 mm - material feed with stepper motor via ball screw * single stroke 600 mm repeatable to saw any length * accuracy of ± 0.1/600 mm - feeder with protective cover and safety limit switch - precise setting of the cutting feed with indication in mm/min - positioning of the saw head and movement of the feeder using a joystick - automatic detection of the start of the cut - large deflection discs, adjustable from cast steel - Saw blade tension with blade tension control and display - Hard metal blade guides for maximum cutting precision - Automatic monitoring of the cutting load - Vice with quick adjustment * with interchangeable clamping and stop jaws - Large, laterally extendable chip tray and coolant container * equipped with 2 electric pumps for lubricating and cooling the saw blade * Coolant gun for cleaning the machine - Chip removal brush for cleaning the saw blade - Operating instructions DE Information from the manufacturer: When installing this saw in a network with a residual current device (FI), this should be universally current sensitive and not less than Kjdjxaa Ewopfx Abfjdn 300 mA.

Condition: new, cutting diameter 300 mm saw band length 3320 x 27 x 0,9 mm band speed 40/80 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 670 kg How it works in the CCS version: After the material has been advanced and Once the vices have closed, the cutting process begins. The lowering is done by its own weight and is controlled by a spring balanced and a hydraulic brake cylinder regulates when the cut is carried out, the saw arm is moved by hand to the necessary position for the feed of the material is pushed up. Electrical panel (marked cable connection, indicator light for Ready for operation, safety main switch provided with padlock, Switch or speed switch, emergency stop, thermal magnetic protection, Kdjdpfx Abjfg E H Tjfsn Low voltage system 24 volts) Electronic tape tension converter with on-screen display. Manual vice with quick lock Base frame with coolant tray and chip drawer, which has a Motorized chip conveyor (accessory) can be replaced. Electric coolant pump for cooling and lubricating the saw blade. Chip clearing brush Adjustable precision stops to make cuts of the same length. Machine is intended for pallet truck transport. Bimetal saw band for solid and profile material Tools and instructions for use

Condition: used, saw blade diameter 350 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 105 mm capacity 90 degrees: flat 180 x 70 mm capacity 45 degrees: round 120 mm capacity 45 degrees: square 100 mm capacity 45 degrees: square 135 x 60 mm saw blade turning speeds 1700 / 3400 U/min Kedpefc T Ufjfx Abfodn total power requirement 1,5/2,2 kW weight of the machine ca. 0,210 t dimensions 0,9 x 1,4 x 1,4 m Manual circular saw machine for sawing aluminum, miter cuts 45° right to 45° left and saw head can be swiveled 0° to 45° to the left. At the Cobra 352 MA (automatic vice) the vices close automatically when the saw head is lowered. •Roller-bearing rotary table for quick and precise miter adjustment •Screw lock to lock the saw head in any angle position •Automatic saw blade lubrication •Clamping system consisting of two vices •Saw head locking in the upper position •Adjustable length stop for cuts of the same length •Vice opening 180 mm

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: round 260 mm capacity 45 degrees: square 250 x 250 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 170 x 170 mm capacity 60 degrees: round 180 mm turning speed range: 40 / 80 m/min dimensions of saw-band 3320 x 27 x 0,9 mm engine output 1,5 / 1,8 kW weight 670 kg Electro-hydraulic semi-automatic band saw SHARK 332 SXI EVO with semi-automatic-dynamic, manual function, has a MEP-28 control for miter cuts from 45° right to 60° left. Some features: New centralized switch console on an articulated arm. Low voltage control panel: Polyester membrane keyboard with thermoformed highlighted Push buttons and actuation control signal. Display to show: * Diagnostics (messages in the user language) * Alarms (description of alarm causes) * State of inputs and outputs * Counting cuts * Time taken for the cut made * Current consumption of the saw blade motor * Saw blade tension * Blade speed * Numerical display of head position. Switch handle IP55 of manual 24V cycle. Complete program of all special cutting cycles. Identification of other possible special cutting cycles for special ones Applications New, latest generation hydraulic control unit, extremely powerful and with low energy consumption. Turntable (on roller bearings of 420 mm with preloaded thrust bearings assembled). Double belt speed (40/80 m/min.) with control Intended to accommodate an electronic inverter for the Continuous regulation of the belt speed from 20 to 90 m/min. Stroke of the saw bow can be programmed directly from the control panel Adaptation to the cutting material. Clamping device can be moved laterally to the left and right Quick release vice. Manually operated strap tension control with display on the screen electronic converter. Base designed to completely contain the coolant, even with maximum angle cuts. The coolant pan (provided with an electric pump for lubrication and Cooling of the saw band) and the chip drawer (can be replaced by a Chip conveyor to be replaced - see special accessories) are in the base frame built-in. Preparation for installing the minimum blade lubrication kit (Optional, in addition to the conventional standard lubrication with emulsion oil. Chip clearing brush. The machine is intended for pallet truck transport. Adjustable length stop for cuts of the same length Material support arm with roller for attaching the loading platform Bimetal saw band for solid and profile material. Kjdpefg E H Uefx Abfsdn Tools and instructions for use in the respective user language.

Condition: new, 230 mm 230 x 230 mm saw band length 2950 x 27 x 0,9 mm band speed 15 - 100 m/min Ksdpjfg E Hysfx Abfsdn total power requirement 2,2 kW weight of the machine ca. 1,2 t SHARK 230-1 NC HS 5.0, electro-hydraulic two-column fully automatic band saw with semi-automatic function for 0° cuts of mild steel, stainless steel, Steel alloys, solid and profile material, with a maximum remaining piece length of 60 mm. - The cross section is max. 230x230 mm. - Numerically controlled band saw machines with the new, specially designed by MEP developed for Automatic Windows “CE” based E FEATURES: - User interface with 7” touch screen display and mechanical buttons for the operating functions of the sawing machine, guaranteed reliable Operation, simple and intuitive, and real-time control of all Cutting parameters. - Safety enclosure in accordance with the latest safety regulations Machinery Directive EN 13898/2007. - New fieldbus communication system with double microprocessor Serial connection. - Robust cast iron structure (G25) to compensate for vibrations Improve machine stability and protect the saw band

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 100 mm capacity 90 degrees: flat 130 x 80 mm capacity 45 degrees: round 100 mm Ksdpfx Abjfmck Hofodn capacity 45 degrees: square 85 mm capacity 60 degrees: flat 90 x 80 mm clamping range 130 mm turning speeds 30 / 60 U/min dimensions of saw-blade 350 x 32 x 2,5 mm total power requirement 1,1 / 2,2 kW weight of the machine ca. 0,22 t dimensions of the machine ca. 1200 x 860 x 900 m Aktionspreis 2026 Inkl. base frame !!! Manual miter saw for miter cuts from 45° left to 45° right. Steel worm wheel with double ball bearings Saw blade shaft mounted on eccentric made of spheroidal cast iron Bronze wheel with wedge and conical coupling to ensure maximum power transmission to the steel worm wheel Vice with adjustable guide bars Adjustable anti-cutting burr device (enables burr-free cutting) Length stop Double return springs Safety main switch Emergency stop button Speed switch Electric coolant pump for lubrication and cooling of the saw blade (attachment a micro spray device possible) Motor 1.5/1.8 kW - 400 volts

Condition: new, cutting diameter 300 mm saw band length 3320 x 27 x 0,9 mm mm cutting width 300 mm Control NC capacity 90 degrees: flat 330x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: square 250 mm capacity 45 degrees: flat 270 x 200 mm capacity 60 degrees: round 180 mm capacity 60 degrees: square 170 mm band speed 15 - 100 m/min Kodofg E H Eopfx Abfjdn total power requirement 2,2 kW weight of the machine ca. 1,1 t dimensions of the machine ca. 3,3 x 2,83 x 2,23 m Furnishing: - fully automatic electro-hydraulic band saw with additional semi-automatic, semi-automatic-dynamic and manual operation - Automatic cycle (cuts from 0° to 60° left) - Semi-automatic, semi-automatic-dynamic and manual cycle (cuts from 45° right to 60° left) - Manual or semi-automatic dynamic cycle to make cuts outside of series production can be carried out directly without programming. - Numerically controlled band saw machines with the new, especially from MEP Windows CE based controller developed for automatic machines. - User interface with touch screen display of 7 and mechanical buttons for the operating functions of the sawing machine. - Stepless regulation of the cutting speed from 15 to 100 m/min Frequency converter (inverter). - Material feed with stepper motor via ball screw - which is mounted on opposite ball bearings; Single stroke 600 mm - repeatable to cut to any length. - Automatic monitoring of cutting load - through a servo valve mounted directly on the cylinder. - The coolant pan is installed in the base frame - Chip clearing brush. - Bimetal saw band for solid and profile material. - Tools and instructions for use with a list of spare parts

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm vice 285 mm turning speed range: 36/72 m/min dimensions of saw-band 2950x27x0,9 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 485 kg dimensions of the machine ca. 1700 x 1000 x 1800 mm Electro-hydraulic semi-automatic band saw SHARK 282 SXI EVO with semi-automatic-dynamic, manual function, has a MEP-28 control for miter cuts from 45° right to 60° left. Semi-automatic function: At the start of the cycle: - Vice closes and motor starts – Saw head lowers for the cut – Motor switches off – Saw head rises – Vise opens. Semi-automatic dynamic system (manual lowering of the saw band bow up to to the desired position and cycle start via the manual button.) Some features: New centralized control console on an articulated arm to allow the operator can be easily switched from any working position. Low voltage control panel: Polyester membrane keyboard with thermoformed highlighted Push buttons and actuation control signal. Display to show: * Diagnostics (messages in the user language) * Alarms (description of alarm causes) * State of inputs and outputs * Counting cuts * Time taken for the cut made * Current consumption of the saw blade motor * Saw blade tension * Blade speed * Numerical display of head position. Kjdpfxsfg E H So Abfodn Switch handle IP55 of manual 24V cycle. Complete program of all special cutting cycles. Identification of other possible special cutting cycles for special ones Applications New, latest generation hydraulic control unit, extremely powerful and with low energy consumption. Large work surface with turntable on roller bearings, measuring 265 mm preloaded thrust bearing, mounted. Double belt speed (36/72 m/min.) with control Intended to accommodate an electronic inverter for the Continuous regulation of the belt speed from 20 to 90 m/min. Stroke of the saw bow can be programmed directly from the control panel Adaptation to the cutting material. Clamping device can be moved laterally to the left and right Quick release vice. Manually operated strap tension control with display on the screen electronic converter. Base frame with pull-out coolant tray. Electric coolant pump for cooling and lubricating the saw band. Preparation for installing the minimum blade lubrication kit (Optional), in addition to the conventional standard lubrication Emulsion oil. Chip clearing brush. The machine is intended for pallet truck transport. Length stop for cuts of the same length Material support arm with roller for attaching the loading platform Bimetal saw band for solid and profile material. Tools and instructions for use in the respective user language.

Condition: new, cutting diameter 280 mm capacity 90 degrees: flat 380 x 260 mm capacity 90 degrees: square 260 x 260 mm turning speed range: 40 / 80 m/min dimensions of saw-band 3440 x 27 x 0,9 mm engine output 1,5 / 1,8 kW weight 670 kg Electro-hydraulic, semi-automatic band saw with additional manual and semi-automatic-dynamic function, for cuts from 45° right to 60° left. Kodpfxofg E Iao Abfsdn Some features: Pivoting control panel on vertical post. 420 mm large rotary table on roller bearings with preloaded thrust bearing and replaceable steel inserts. Double belt speed (40/80 m/min.)