Used Meh 5 2 1 8 B for sale (126,482)

Year of construction: 2012, condition: ready for operation (used), functionality: fully functional, A complete cooling water unit that was used for cooling screw compressors. Pump unit with machine frame, consisting of: - 3 x Grundfos CRNE45-2-2 A-F-G-V-HQQV centrifugal pumps (Year of manufacture: 2012) Q = 45 m³/h, H = 30.6 m, P2 = 5.5 kW - 6 x manual stainless steel shut-off butterfly valves DN 80 - 3 x basket strainers DN 80 - 3 x check valves DN 80 - 1 x pressure relief valve - 2 x Rosemount GP6 S22 C1 pressure transmitters Hjdpfx Aoywuihjp Hjnt - 6 x stainless steel gauges Cl. 1 - 1 x GRP pipe - 1 x mounting frame Dimensions: Length: 2400 mm Width: 2000 mm Height: 1400 mm Weight: 780 kg Heat exchanger unit with frame, consisting of: - 2 x bolted plate heat exchangers, Funke Apparatebau GmbH (Year of manufacture: 2001) Type: FPS 21-100-1-E Volume: 29.2 / 29.8 liters Max. operating pressure: 10 bar Max. temperature: 80°C - 8 x manual intermediate flange shut-off butterfly valves, stainless steel - 1 x KSB BOA electric valve with Auma SAR actuator and MATIC head, including Harting connector - 2 x PT 100 sensors - 6 x analog thermometers, stainless steel Cl. 1 - 2 x PE pipework with bends 110x65mm Gerodur - 1 x expansion vessel - 1 x mounting frame Dimensions: Length: 2200 mm Width: 2000 mm Height: 2000 mm Weight: 1500 kg

Condition: like new (used), The machine is completely overhauled and therefore as good as new! Technical specifications Drilling method : single-lip drilling Number of spindles 1 Drilling range in steel D= 1-6 mm Drilling depth 420 mm Hnsdsfgwlbspfx Ap Hst Max. workpiece length 420 mm Manufacturer: TBT / SFT New electrics and new controls!

Condition: used, Ishida Checkweigher and Metal Detector Fully stainless steel Reject bin Hodpfoxtfymjx Ap Hent Weighing range - 0 to 1200 grams 240 volts

Condition: excellent (used), Professional fire-fighting motor pump from the renowned German manufacturer Ziegler (Albert Ziegler GmbH). This device is designed for water transfer—ideal for fire departments, agriculture, construction sites, and industrial applications. Robust, compact build on a transport frame (can be transported with a forklift truck). The pump is in good technical condition and complete as shown in the photos. Technical data: - Manufacturer: Ziegler (Germany) - Model: TS 8/8 - Year of manufacture: 1992 - Output: 800 l/min - Operating pressure: 8 bar - Speed: 4,400 rpm - Engine: petrol/gasoline - Operating hours: approx. 56 h - Weight: approx. 143 kg (ready for operation) - Standard: DIN 14410 / 14420 Hnsdpfx Aey D An Sop Hot Condition: - Used - Normal signs of use - Technically flawless and fully operational Scope of delivery: - Ziegler motor pump - Firefighting couplings - Complete set as shown in the photos Additional information: - The price refers to 1 unit of the pump - Sold as shown in the pictures - Can be shipped on a pallet or collected in person

Condition: new, Year of construction: 2024, Hydraulic press brake PBO-3216-CNC Delem DA-58T Specifications - Nominal pressure: 1600 kN - Max working length 3200 mm - Throat depth: 320 mm - Max stroke: 180 mm - Daylight: 455 mm - Distance between side frames: 2600 mm - Max backgauge distance: 600 mm - Nominal motor power: 11.0 kW - Length: 3300 mm - Width: 1650 mm - Height: 2500 mm - Weight: 8700.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Delem DA-58T controller - Advanced operator support based on algorithms - Advanced, graphic simulation of bending sequences - Operator prompts included - Algorithms to shorten the production process - Automatic calculation of crowning Hnodpogih Iuofx Ap Hjt Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. Optional extra - Automatic crowning Enables the controller to take control over crowning, thus, ensuring that the setting value is always perfectly matched to the needs. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: new, Year of construction: 2024, Hydraulic press brake PBO-3212-CNC Delem DA-58T Specifications - Nominal pressure: 1250 kN - Max working length 3200 mm - Throat depth: 320 mm - Max stroke: 120 mm - Daylight: 390 mm - Distance between side frames: 2600 mm - Max backgauge distance: 600 mm - Nominal motor power: 7.5 kW - Length: 3870 mm - Width: 1550 mm - Height: 2400 mm - Weight: 6600.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Delem DA-58T controller - Advanced operator support based on algorithms - Advanced, graphic simulation of bending sequences - Operator prompts included - Algorithms to shorten the production process - Automatic calculation of crowning Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. Optional extra - Automatic crowning Enables the controller to take control over crowning, thus, ensuring that the setting value is always perfectly matched to the needs. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist Hnsdpegi Dkyofx Ap Hot - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: used, spindle diameter 125 mm spindle travel 1130 mm column travel 6000 mm headstock travel cross 1700 mm column travel on cross-slide 400 mm spindle speeds 2,24 - 450 (27x) U/min volt 380 V Hjdpfxoyuqc Rj Ap Hent total power requirement 14 kW Facing head D.R.O.

Condition: excellent (used), Year of construction: 2017, It has only worked for 445 hours. Very good technical condition. Hsdpfx Aszgu Efep Hsnt Ready for operation. The machine is designed for cutting aluminum and PVC. E 580 control system. Blade diameter: 500 mm. Cutting according to the outer dimension, without correction. Blades guards are automatically lowered and raised. Pneumatic adjustment of the cutting angle from 45 to 90 degrees. Printer included.

Condition: excellent (used), Year of construction: 2015, Wittmann Battenfeld VM 150/525 R1280 Servo Power / Vertical Injection Moulding Machine with Rotary Table Year of manufacture: 2015 Injection Unit: Screw diameter: 35 mm Shot weight: 175.6 g Injection pressure: 2743 bar Dosage volume: 193 ccm Clamping Unit: Clamping force: 150 t Tie bar distance: 0x0 mm Platen size: 1280 mm Ejector: hydraulic Clamping unit: hydraulic Control system: UNILOG B6 Additional equipment: Hjdpfxjzy Ikzj Ap Hent Vertical injection moulding machine with rotary table Hybrid machine: high-speed, energy-saving, and very quiet Air valve x 5 Hydraulic core pull x 1 Hot runner control x 12 Injection unit is wear-resistant and corrosion-resistant Rotary table diameter: 1500 mm Rotary table driven by a servomotor, controlled by an inverter Dimensions: Weight: 11,300 kg Length/Width/Height: 3.83x1.50x4.07 m All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Year of construction: 2014, condition: new, machine/vehicle number: RE-HU-2014-1603-1, Filter plate specification 250X250mm Filtering area 0.56m2 Number of filter plate 8pcs of chamber plate including one tail plate and one head plate Filtering pressure 0.6-1.6Mpa Thickness of filter cake 25mm Filtering chamber volume 7L Filtrate discharge Open type outlet Construction material for framework Main material for framework is carbon steel. Contact parts in PVC or SS. Material for chamber plate is PP Working temperature <90 ℃ Overall dimension 960X400X350mm Hnodpfx Apjb Dluwo Hot Weight 350KG Buy or rent: Additional information: Please order before please, because the demand is very high.

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, operating hours: 83,800 h, Equipment: CE marking, LVD STRIPPIT GLOBAL 30 1225 turret press The machine is in very good technical condition and was used by Alsanit. It has been regularly serviced exclusively by the manufacturer's service department. Only new and original spare parts are used during service. The turret press is currently in continuous production use. If you are interested, we encourage you to schedule a visit to confirm the technical condition and technological capabilities of the machine. General data: Location: Alsanit Sp. z o.o., ul. Wieleńska 2, 64-980 Trzcianka, Poland Province: Wielkopolskie Year of manufacture of the turret press: 2006 Date of purchase and installation of the machine: June 2019 Machine operating hours: 83584 cycles Maximum pressing force: 300 kN (30 tons) Maximum sheet thickness: 6.4 mm Turret system type: Thick Turret Control unit: CNC: GE FANUC 180 IP Maximum travel in the X-axis: 2,576 mm Maximum travel in the Y-axis: 1,337 mm Maximum table load (uniform): 145.6 kg Simultaneous speeds: 110 m/min Number of strokes per minute (punch diameter 25 mm): ±2% 400 min-1 Number of strokes per minute (nibbling function - 2 mm): 1000 min-1 Number of strokes per minute (marking/0.5 mm): 1700 min-1 Maximum slide speed in the X-axis: 83 m/min Maximum slide speed in the Y-axis: 73 m/min Number of tool stations in the turret: 30 pcs Station A – max. diameter 12.7 mm: 8 pcs Station B – max. diameter 31.7 mm: 16 pcs Station C – max. diameter 50.8 mm: 2 pcs Station D – max. diameter 88.9 mm: 4 pcs Number of indexed (rotary) stations in the turret: 4 pcs (stations D) Note: Each station D can accommodate a multi-tool (1 multi-tool contains 3 to 8 tools), which increases the number of tools from 12 to 32 pcs. Machine height: 2,325 mm Machine length: 5,584 mm Machine width: 5,160 mm Machine weight: 13,750 kg Sheet size: 1250 x 2500 mm Number of sheet clamps (individually programmable): 3 pcs Tilting scrap collector for cut parts: 450 x 500 mm Brush table protecting against scratching the sheets CE certificate Hjdpfx Apjzxzage Hjnt Electrical power supply: 380/415 Volt, 35.5 kVA, 63 A, cable cross-section (3+1)x16 mm2 Additional equipment: Scrap conveyor; Brush table MACHINE SPECIFICATION The machine is constructed as a closed bridge frame. The rigid construction ensures stability, reduces noise, vibrations, and oscillations during operation, which in turn has a positive effect on the long service life of both the tools and the machine. The sheet clamps are controlled by a foot switch, and the pin that extends from the table for positioning allows the operator's hands to remain free for proper placement of the sheet on the table. The turret drum of the LVD Strippit Global 30 punch press is made as a cast monoblock, mounted in the machine structure and supported by high-quality and precise bearings. In addition, inside the turret drum, in each tool station, there are hardened and improved sleeves, which can be easily replaced if necessary. The servo drive of the turret ensures precise bidirectional rotation of the turret and the indexing stations (which are locked by a ball head pin after reaching the required angular position, and the accurate linearity and perpendicularity are ensured by tapered, hardened sleeves).

Condition: used, Year of construction: 2002, grinding diameter 450 mm grinding length 1500 mm centre height 225 mm Control FAGOR EQUIPEMENT - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - T6: HF Fischer spindle MFV or MFZ 1224/1242/1260 - T7: HF Fischer spindle MFV or MFZ 1224/1242/1260 - Marposs tool measurement - active longitudinal positioning - Elaso GAP-control on T1 and T2 contactless integrated in the control surface - Elaso GAP internal grinding with fluid sensor for T6 and T7 - semi-automatic balancing by Elaso integrated in the control surface for T1/T2 - tailstock hydraulic with fine adjustment +/- 150 microns - dresser on workpiece spindle side table mounted - dresser on tailstock side table mounted - dresser on upper table - new service- and userfriendly housing SPECIAL EQUPEMENT: Workhead with direct drive - strongly recommended for non-circular grinding - workpiece weight flying max. 75kg - workpiece weight between centres 150kg - water-cooled B-axis with direct drive - center height 225 mm - extremely torsionally stiff - highly accurate positioning - resolution ° - water-cooled Hydrostatic ball screw - x-axis - wear-free, as there is no contact during operation - no loss of precision, even during long-term use at full load and maximum speed - no friction at low speeds - no friction force backlash when the direction of rotation changes - translates even the smallest rotational movements - no stick-slip effect even at low speeds - no fluctuations in frictional torque due to ball circulation - higher axial stiffness compared to ball screws - significant improvement in damping, resulting in better workpiece surface finish and tool life - no oscillations due to ball circulation - also suitable for high speeds and accelerations - cost-effective alternative to the linear motor with greater precision and significantly lower heat generation - significantly less power dissipation and, as a result, no problems with swarf on permanent magnets New hydraulic unit - optimized temperature control (chiller) - Energy-saving Only one pump controlled by VFD - Pressure monitoring - monitoring of the hydrostatic oil for water content. (Damage to the bellows is recognised and detected prematurely) -fine adjustment +/- 150 microns Paper belt filter 375l – alternative 480l Grinding mist extraction system – emulsion MECHANICAL OVERHAUL -complete machine according to Kellenberger protocoll -new painting ELECTRICAL OVERHAUL - new modern Fagor CNC with BEMA HMI - new electric cabinet - new digital drive technology - replacement of all electrical cables, switches etc. - new absolute external scales in x- and z-axis Hodpsuxfu Nofx Ap Hont - new absolute encoder (B-axis) Grinding software BEMA-Standard: - workpiece zeroing - grinding wheel zeroing - dressing diamond measuring - corrections - external and internal surface grinding - external and internal angle grinding (turning of the b-axis, dressing with straight wheel) - external and internal radius grinding (radius dressed on wheel) - semi-automatic traverse grinding - workpiece zeroing - 2 dressing diamonds - 1 dressing blade - dressing roll - 3 flat dresser - corrections - Z-position measurement - GAP control Optional grinding cycles at no extra charge: Profile plunge grinding: - external and internal profile plunge grinding with profile wheel Pr...

Condition: good (used), functionality: fully functional, mileage: 394,524 km, power: 125 kW (169.95 HP), first registration: 10/1999, fuel type: diesel, empty load weight: 6,220 kg, maximum load weight: 1,270 kg, overall weight: 7,490 kg, tire size: 215/75R17.5, axle configuration: 4x2, wheelbase: 4,200 mm, next inspection (TÜV): 12/2026, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro2, suspension: steel, number of seats: 3, loading space length: 3,950 mm, loading space width: 2,430 mm, Year of construction: 1999, operation weight: 7,490 kg, Equipment: ABS, additional headlights, airbag, all-season tires, cable winch, central locking, crane, cruise control, differential lock, fog lights, hydraulics, immobilizer system, onboard computer, parking heater, power assisted steering, seat heater, soot filter, summer tires, trailer coupling, truck registration, winter tires, Model: 817/42AT7 First registration: 12.10.1999 Mileage: 394,524 km (original) Engine power: 125 kW Engine displacement: 4,250 cm³ Crane model: PALFINGER PK 5000 B WINCH 3x hydraulic extensions 4x hydraulic outriggers/legs Rear legs extendable Maximum lifting capacity: 2,500 kg Maximum outreach: 8.7 m with 450 kg at hook end Year of manufacture: 1999 PTO or Hydraulics ALUMINIUM TOOLBOXES STORAGE SPACE/PIPES UNDER THE PLATFORM GOOD WINTER TYRES GOOD SUMMER TYRES EQUIPMENT FOR TRANSPORTING LONG POSTS 3-SEATER 230-Volt inverter Auxiliary heater Antennas Radio/Cassette/CD/MP3 1x air-suspended seat with seat heating, fully adjustable 1x sleeper berth Electric window lifters Electrically adjustable exterior mirrors Sun visor Work lights Hjdpfx Apjztfche Hent Fog lights High beam Hazard warning light Stowage box Aluminium fuel tank Emission class: EURO2 Retarder/Intarder/Engine brake Drive configuration: 4x2 Differential lock Wheelbase axles 1 and 2: 4,200 mm Tyre size axle 1 (front): 215/75R17.5 Tyre size axle 2 (rear): 215/75R17.5 Leaf spring suspension / leaf spring suspension Wheel covers Unladen weight: 6,220 kg Payload/loading capacity: 1,270 kg Permissible total weight: 7,490 kg Overall vehicle dimensions (L x H x W): 715 cm x 275 cm x 243 cm Body dimensions exterior or interior (L x H x W): 395 cm x 42 cm x 235 cm New TÜV and emissions inspection available by arrangement for an additional charge! You are welcome to contact us for further information and pictures via WhatsApp, Telegram, Viber, and Signal. German (Deutsch): Wir sprechen Deutsch und Englisch, aber Sie können uns gerne in Ihrer Sprache eine Nachricht schicken! English (English): We speak German and English, but feel free to send us a message in your language! Spanish (Español): Hablamos alemán e inglés, pero no dude en enviarnos un mensaje en su idioma. Portuguese (Português): Falamos alemão e inglês, mas fique à vontade para nos enviar uma mensagem no seu idioma! French (Français): Nous parlons allemand et anglais, mais n'hésitez pas à nous envoyer un message dans votre langue ! Italian (Italiano): Parliamo tedesco e inglese, ma non esitate a inviarci un messaggio nella vostra lingua! Russian (Русский): Мы говорим на немецком и английском, но вы можете написать нам сообщение на своем языке! Arabic (العربية): نحن نتحدث الألمانية والإنجليزية، لكن لا تتردد في إرسال رسالة إلينا بلغتك! Dari (دری): ما به آلمانی و انگلیسی صحبت می‌کنیم، اما می‌توانید پیام خود را به زبان خود برای ما ارسال کنید! Trade-in possible! Price is net! We can transfer your vehicle directly to the ports of Hamburg, Kiel, Bremerhaven/Cuxhaven, Lübeck in Germany, or Antwerp/Belgium and Amsterdam. We can ship the vehicle worldwide for you! Export license plates available on request! We support you with export, original data confirmation for country homologation, supplier's declaration, preparation of export documents and production of customs plates if required. Viewing and test drive possible at any time, including weekends, by prior telephone arrangement! Disclaimer: The buyer is responsible for inspecting the condition, dimensions and equipment of the goods/vehicles independently. All information is provided without guarantee. Subject to change, prior sale and errors.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, ABB Robotics IRB 2600-12/1.85 IRC M2004 robot, complete 1 x Serial number 2600-102039 1 x Serial number 2600-102040 Controller: IRC5 M2004 Hnjdpfxozm Ikhs Ap Hjt Number of axes: 6 Max. payload: 12kg Max. working range: 1850mm Year of manufacture: 12/2013 Scope of delivery: Robot, controller, cables, teach pendant, circuit diagrams Used item – normal signs of wear. Further details, article numbers, and images available upon request. Two-week commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Ex works / free loading. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with VAT shown. Price is per robot. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the quantity, weight and desired delivery conditions. Shipping costs to abroad on request – please specify country, city and postcode. Freight costs on request – please specify delivery address.

Condition: excellent (used), Broaching tool, broaching needle, special tool, grooving tool, keyseating machine, keyway broaching machine, keyway broaching machine, keyway broaching tool, broaching needle Hedpsitt Ryjfx Ap Hjnt -Manufacturer: SWZ, broach push broach -Type: B 6 J9x1.8 RL 24-72mm -Item no.: 45 0014 -Width: 6mm -Number: 2x broach available -Price per piece -Total dimensions: 900/6/H13 mm -Weight: 0.5 kg/pc.

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 1261, total width: 8,500 mm, total length: 24,000 mm, total height: 3,650 mm, No minimum price – guaranteed sale to the highest bidder! Two complete filling/packaging lines are for sale, consisting of the following: Hnjdpjzzn I Asfx Ap Hst 2 x B&C (Bertoncello & Cecchin, Italy) pouch filling machines CV 80 DN, manufactured in 1997 2 x Latz palletizers LHP 1800 (new Siemens S7 control system in 2025) 1 x Latz stretch wrapper The lines include various roller conveyors. The machines will be dismantled in week 38. TECHNICAL DETAILS Possible sack volumes: 10, 15, 20, 45, 50, or 70 liters MACHINE DETAILS Connection power: approx. 38 kW Overall width: 8,500 mm Overall length: 24,000 mm Overall height: 3,650 mm EQUIPMENT Defect removal belts Roller conveyors Latz stretch wrapper

Condition: excellent (used), Screening and sorting machine for bulk materials or small metal components. Very good condition – complete, equipped with original drive, control cabinet, and a set of calibration screens. • Manufacturer: SCHWANOG Günter KG, Villingen / Schwarzwald • Model: RAPID SBM 63G • Year of manufacture: 1972 • Drive: Bauknecht motor 0.55 kW, 380/220 V, 2850 rpm • Control cabinet: Carl Kurt Walther GmbH, Wuppertal • Robust steel construction, stable frame with transport wheels • Power supply: three-phase 400 V • Complete set of screening sieves in wooden frames (numbers 1–6) • Sieve mesh range: from 2 mm to 15 mm • Adjustable and exchangeable screens • Main switch, start/stop controls, and overload protection • Very good condition – dismantled from the plant, mechanically fully functional The machine is ready for operation after a basic inspection. Ideal for: metalworking shops, foundries, industrial laboratories, sorting granulates, sand, or components. Hjdpfx Apsxmt Eqj Hsnt

Condition: used, axle configuration: 3 axles, first registration: 04/2000, color: other, Year of construction: 2000, Empty weight: 4.760 kg Axle 1: left 8 mm right 8 mm Axle 2: left 6 mm right 6 mm Axle 3: left 8 mm right 8 mm We have the possibility to stack trailers! Hjdpfx Aezkk H Tep Hsnt

Year of construction: 2017, condition: ready for operation (used), overall weight: 380 kg, Automation equipment manufactured in 2017. This EXPERT EDX810/0250/8 is part of a system and has a machine weight of 380 kg. If you are looking to get high-quality automation capabilities, consider the EXPERT EDX810/0250/8 machine we have for sale. Contact us for further details. 4 units available Technical Data • Machine Type: Rotary Index Drive / Turntable • Indexing Angle: 8 × 45° • Index Time: 2.02 sec. • Transport Time: 1.79 sec. • Motor Voltage: 400 V • Motor Frequency: 50 Hz • Motor Power: 0.75 kW • Brake Voltage: 400 V • Braking Torque: 10 Nm • Operating Mode: SEW II.c • Dimension Sheet: A9681 Hnjdpfx Aez Ap Hvop Hjt • Noise Emission: < 75 dB(A) • Turntable / Drum Drive: Turntable configuration • Rotation Direction: Forward / Backward • Number of Speeds: 1 • Activation: Direct

Condition: used, 2-stage electric motor with gearbox DEMAG Type FG 08B-B3-23-H1-F1 Output speed fast: 915 rpm Output speed slow: 174 rpm 1 unit three-phase DC shunt-wound motor DEMAG Type: KBA 125 B Motor No.: 3926599 Speed: 915 rpm Motor power: 4.7 kW Power supply: 400 Volt, 50 Hz - Clutch disconnects via armature thrust movement during direct drive 1 unit three-phase DC shunt-wound motor DEMAG Type: KBA 80 A Motor No.: 3926599 Speed: 1360 rpm Motor power: 0.83 kW Power supply: 400 Volt, 50 Hz - Brake disengages via armature thrust movement during operation - When stationary, the brake operates through the reduction gearbox on the motor Hodpfx Apsy N D E Ao Hjnt - Output speed via gearbox: 174 rpm Reduction gearbox DEMAG Type FG 08B-B3-23-H1-F1 Gearbox No.: 13926599 Input speed: 1360 rpm Output speed: 174 rpm Gear ratio: i = 7.8 Output shaft via motor armature: Ø 32 mm Shaft stub length: 80 mm Centering diameter at motor: Ø 125 mm Bolt circle diameter at motor: Ø 150 mm / 4xM12 internal thread Dimensions (LxWxH): 1100 x 430 x 300 mm Weight: approx. 160 kg Good condition

Condition: used, maximum load weight: 1,437 kg, overall weight: 2,000 kg, axle configuration: 2 axles, first registration: 10/2015, * Call (Contact · Phone · Mobile · WhatsApp) Böckmann twin-axle box trailer Type: AT 1/B/HBBAA Model designation: KT2 3015/20 Hnsdpewzf T Sjfx Ap Hst VIN: WBOAT1AAA00209017 Technical data Weights: * Unladen weight: 563 kg * Payload: 1,437 kg * Permissible total weight: 2,000 kg Axle loads: * Axle 1: max. 1,000 kg * Axle 2: max. 1,000 kg Support load: Max. 100 kg Maximum speed: 120 km/h Cargo area dimensions (to be confirmed): * Length: approx. 3,015 mm * Width: approx. 1,500 mm * Height: approx. 2,000 mm Year of manufacture: 07/10/2015 TÜV: Valid until 10/2025 Price: Net All information provided without guarantee.

Condition: ready for operation (used), Siemens CPU315T-2 DP 6ES7315-6TH13-0AB0 Simatic S7 E-Version 1, factory-refurbished by Siemens as per orange label, scope of delivery as shown in photos. Hodpfx Apozzhr Is Hsnt

Condition: used, Year of construction: 2009, FANUC Robodrill ALPHA T21iFa Fanuc 31i control X 500mm Y 400mm Z 330mm Tool magazine with 21 positions for BT30 tools BT30 spindle taper Spindle speed 24,000 rpm Hnodpjzrkycjfx Ap Hot NIKKEN DD5AX-200AF 5-axis rotary table Tool height sensor on the table

Condition: new, Siemens 6FC9320-2BC Resolver measuring device DM 2 / 150, gear ratio i = 1 : 5 100% functional. Hjdpfxoi Ed Hks Ap Hsnt

Condition: used, axle configuration: 3 axles, first registration: 04/2000, color: other, Year of construction: 2000, Empty weight: 4.760 kg Axle 1: left 8 mm right 8 mm Hodpfx Apjzi Dnhe Hsnt Axle 2: left 6 mm right 6 mm Axle 3: left 6 mm right 6 mm We have the possibility to stack trailers!