Used Meat Saw for sale (7,509)

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Radial arm saw graule ZS 170N For cutting ALU,PVC and wood -cross-cut and mitre circular saws for straight cross-cuts and mitre cuts left and right -stable grey cast iron construction -precise ball bearing guide of the tool slide on hardened and ground steel shafts Fjdpfxjz Nk Elj Akyjgh -manual saw feed fast mitre adjustment up to 25° -readjustable fixed stops at 90° and 45° -lower saw blade protection can be connected to extraction system Motor : 400 V / 3.0 kW Lenght of cut: 410 mm Depth of cut : 170 mm Sawblade diameter : 420 mm The saw is equiped with pneumatical clamping, lubricating unit adn hydraulic saw feed brake. Machine is ready for operation saw blade sharpened. We can ship the machine to your address via shipping company DSV ( On demand)

Condition: used, Year of construction: 1993, machine/vehicle number: 93-11-247, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, rotational speed (max.): 4,000 rpm, Fully functional machine from a plastics/wood processing company. In good condition. Machine is available from calendar week 50/2026. Fgjdpfx Aoz Ngt Sekyjh

Condition: like new (used), Year of construction: 2022, functionality: fully functional, power: 84 kW (114.21 HP), cutting height (max.): 450 mm, saw blade diameter: 630 mm, actuation type: electric, rotational speed (max.): 1,480 rpm, Walter 84kW Multi-blade saw Dimensions Length 3440 mm Width 1900 mm Height 1700 mm Cutting parameters Maximum diameter of the log to be sawn 450 mm Diameter of the circular saw 630 mm Minimum width of the center stack 60 mm Maximum number of saws per spindle 4 pieces 2 spindles, one on top and one on the bottom Motors Power of the motor for the lower drive 52 kW Power of the motor for the upper drive 41 kW Spindle speed 1480 rpm Fodez H T Ayepfx Akysgh Infinitely variable feed rate 0–15 m/min (0–25*) Power of the motor for the feed drive 4 kW Additional equipment Log turner for rotating and positioning logs up to 6 m in length Side product separator for material up to 6 m in length

Condition: good (used), Year of construction: 2014, machine/vehicle number: 746, Offer 26216 Technical data: - Saw blade diameter up to 400 mm - Miter adjustable to the left and right up to 30° Fodpfx Aksz Ny Ddjyjgh - Cutting range at 90° for round and square stock: 140 mm - Cutting range at 90° for rectangular stock: 210 x 120 mm - Cutting range at 45° for round and square stock: 120 mm - Cutting range at 30° for round and square stock: 105 mm - Cutting speeds continuously adjustable from 10 to 80 m/min - Feed speed of the saw blade hydraulically continuously adjustable - Pneumatic clamping system/vise - Coolant system + micro-spray system - Outfeed – roller conveyor with dimension stop: 3000 mm - Infeed – roller conveyor: 3000 mm - Pneumatic connection: 6 bar - Drive: 400 V / 4.0 kW - Space requirement: approx. W 1000 x H 1900 x D 1200 mm - Weight: approx. 1000 kg

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, Equipment: documentation/manual, The Anko HLT-700XL Dumpling Machine, a multipurpose filling and forming machine, has been approved by many clients. By simply changing the forming mold set, the HLT-700XL can produce various foods such as dumplings, fried dumplings, samosas, hargao, and ravioli. With the HLT-700XL, any food maker can easily transform their business to automatic production. Fgedpfx Aez I Ax Hekyoh

Condition: like new (used), Year of construction: 2023, functionality: fully functional, type of input current: three-phase, saw blade bore: 800 mm, Equipment: saw blade guard, scorer, We offer for sale a modern CNC miter saw, Easy Cut 828 PLUS, manufactured in 2023, designed for professional production of wooden structures, roof trusses, frameworks, and other wooden components. The machine is in excellent technical condition and ready for immediate use in production. Main advantages of the machine: ✔ CNC control with a touch screen, easy operation, and the ability to load projects via USB, LAN, or Ethernet. Fgsdpfx Akszlrn Ujyjh ✔ Automatic linear material feed using a servo motor. ✔ Cutting at any angle with 4 controlled axes. ✔ Cutting materials up to 13m in length. ✔ Rotating the saw blade 360°. ✔ Tilting the blade from 90° to 38°. ✔ 15m input conveyor. ✔ 5.5m output conveyor. ✔ Saw blade diameter of 800 mm. ✔ Automatic optimization of cuts with minimal material waste. ✔ Marking of cut parts directly on the machine. ✔ Pneumatic horizontal and vertical material clamping. ✔ High accuracy, speed, and safety. ✔ Manual and fully automatic operating modes. ✔ Online service support via internet connection. ✔ Full compatibility with MiTek software for truss production. Technical solution: The machine consists of an input conveyor, a CNC sawing unit, and an output conveyor. The material feed is provided by a servo motor with high positioning accuracy. The sawing unit allows for cutting precise lengths and complex angular cuts with an adjustable center axis.

Condition: as good as new (ex-display), Year of construction: 2020, machine/vehicle number: 6165011005, functionality: fully functional, power: 2.5 kW (3.40 HP), cutting height (max.): 335 mm, cutting width (max.): 460 mm, pivoting range: 60 °, rotational speed (max.): 110 rpm, rotational speed (min.): 20 rpm, total height: 1,932 mm, total length: 2,763 mm, total width: 2,502 mm, overall weight: 2,100 kg, table height: 700 mm, year of last overhaul: 2020, Equipment: CE marking, documentation/manual, This machine has never been used in production and has only served as a demonstration model in our showroom. New price: €50,900,- excl. VAT Fixed selling price: €39,500,- excl. VAT Fgodpfxez I Tgze Akysh Fully hydraulic production band saw machine, heavy-duty design, for machining light to heavy materials, profiles, tubes, and solid stock in all grades. For both 90° and miter cuts. The smooth swiveling of the sawing unit allows for stepless and quick adjustment of any desired miter angle, using a clearly readable adjustment scale: one-sided up to 60° (acute angle 30°). Straight cuts and miter angles up to +45° can be cut automatically. Angles larger than 45° up to 60° are cut in a semi-automatic cycle. The stepless adjustable band speed and feed rate ensure the best results in terms of cutting performance and tool life. The standard Advanced Control system offers optimal machine operation. 99 sawing programs (length/quantity combinations) can be easily programmed in advance. After the programmed number of pieces has been reached, the machine switches off automatically. When used automatically, the minimum non-cutting time ensures maximum output. The precise ball screw drive in the material feed guarantees exact material length positioning.

Condition: used, Year of construction: 1995, total length: 22,000 mm, total width: 7,300 mm, total height: 6,700 mm, cutting range round steel at 90°: 120 mm, type of input current: three-phase, overall weight: 30,000 kg, input voltage: 380 V, cutting range square steel at 90°: 120 mm, input current: 63 A, cutting range flat at 90° (X-axis): 120 mm, space requirement height: 7,000 mm, space requirement length: 25,000 mm, space requirement width: 13,000 mm, Complete KASTO automated long-material storage, handling and sawing system for steel bars, tubes, pipes and profiles. The system consists of a KASTO SSZ Vario 140 Duo automatic storage installation with material handling equipment and a KASTO PKS 140 PL circular saw. The installation is designed for efficient storage and automatic supply of long steel materials directly to the cutting process. A key advantage of the system is the very high storage density. The storage system itself, without the saw, measures approximately: 22.0 m × 7.3 m × 6.7 m Floor space required: approx. 160.6 m² At the same time, the system offers a total of: 526 storage locations consisting of: 489 storage shelves with 275 mm depth 37 storage shelves with 565 mm depth Each storage location can accommodate material up to: 6,500 mm length The calculated total horizontal shelf area is approximately: 1,010 m² This means that more than 1,000 m² of usable long-material storage surface is concentrated within only approximately 160 m² of factory floor space. The storage structure consists of 9 double-sided material storage columns. Fgodoz I Tm Iopfx Akyjh Technical data Manufacturer: KASTO Maschinenbau GmbH & Co. KG Model: SSZ Vario 140 Duo Documentation designation: SSL Vario 140 K-Duo Year of manufacture: 1995 Storage locations: 526 Maximum material length: 6,500 mm Maximum material dimensions: Ø 140 mm or 260 × 120 mm Handling device capacity: 10 kN / approx. 1,000 kg Storage location load ratings: 5 / 10 / 15 / 25 kN Storage dimensions without saw: approx. 22.0 × 7.3 × 6.7 m Storage footprint: approx. 160.6 m² Calculated total shelf area: approx. 1,010 m² Storage configuration: 9 double-sided storage columns Electrical supply: 380 V / 50 Hz / 3-phase Power: 20.0 kW Current: 63 A Weight of bridge handling unit according to nameplate: approx. 4,700 kg Integrated / associated sawing machine: KASTO PKS 140 PL circular saw The system is particularly suitable for steel service centres, steel distributors, metalworking companies, machine builders and manufacturers processing large quantities of bars, tubes and profiles. Automatic material storage and handling can significantly reduce internal transport, forklift and crane movements, material searching and preparation time before cutting. Technical documentation and installation drawings are available. Location: Poznań, Poland Inspection possible by prior arrangement. Exact technical condition and final scope of supply can be confirmed during inspection.

Condition: excellent (used), Danobat CP 1211T Large Capacity Horizontal Bandsaw (1999) Year 1999 Fgodpsz N Awmsfx Akyoh Condition Used Serial Number 03994700 Stock Number 2138 Type CP 12.11 T Round Cutting Capacity 1100mm Rectangle Cutting Capacity 1200mm x 1100mm Table Height 785mm Wheel Size 1200mm Saw Band Speeds 1-77 m/min Band Tension 400L Machine Dimensions 7000mm x 8500mm 3650mm Swarf Conveyor Manual & Automatic Cycles

Condition: used, Year of construction: 2022, DOUBLE-SWIVELING SAW UNIT: MAXIMUM CUTTING HEIGHT WITHOUT COMPROMISE. RIP FENCE FULL SUPPORT & WIRELESS: APPLICATION AND PRECISION MECHANICS. CONSOLE eye-S: THE USER-FRIENDLINESS OF ACCESSING ALL FUNCTIONS VIA THE CONTROL. Technical data Linvincibile si x Max. cutting height at 90° (mm) 200 with 550mm saw blade Max. cutting height at +45° (mm) 130 with 550mm saw blade Max. cutting height at -45° (mm) 105 with 550mm saw blade Saw blade swivel angle (degrees) -46 ÷ +46 Raising and swiveling of the saw unit programmable Control/work height display Easy Touch Saw blade speed (rpm) 3000 ÷ 5000 (inverter) Main motor power kW (hp) 9 (12) Hz50 Format cuts: - with carriage 3200 (mm) - with carriage 3800 (mm) 3200x3200 3800x3200 Cutting width with parallel fence (mm) 1600 Dust extraction port diameter: - on the frame (mm) - on the saw blade guard (mm) - on the riving knife (mm) 120 100 Standard equipment: - Rip fence completely in aluminum structure with guiding system on dovetailed, hardened, and arc-ground steel guides with large contact area - Version with rip fence 3200 mm - 10-year warranty on the guiding system of the saw carriage - On/off switch for main saw/scorer on the rip fence - eye-S 15" electronic control unit complete with: * 15" touchscreen monitor * Direct control of the following working axes with manual, semi-automatic, automatic, and incremental mode: - Height adjustment of the main saw blade - Tilting of the saw unit - Parallel fence adjustment - Height and side adjustment of the scorer (the scorer is automatically raised to the set position when the power is turned on, and lowered when the power is turned off) * Speed adjustment with frequency converter * Operator assistance functions for performing complex cuts * Possibility of saving up to 1000 programs with relative images * Possibility of saving up to 1000 different tools with relative images * Cutting sequence control from preloaded parametric machining programs * Environment for creating and saving new sequential work programs * Automatic acquisition of work dimensions from the Thundercut app * USB port * Preparation for network connection - Auxiliary function of the electronic control with: * Determination of the correct stop position on the fence for format machining with a tilted saw blade * Determination of the correct stop position on the fence for angled cuts with a miter fence on the work table with or without a tilted saw blade - Swiveling control panel over the table - Programmable parallel fence with THK guide-controlled axis and guided by a stable ball screw with a travel speed of 25 m/min. - Parallel fence can be completely swung away under the work table, cutting width on the parallel fence 1600 mm - Support arm for the rip fence with positioning on prismatic linear guides with ball bushings - "Full Support & Wireless". Frame for miter cuts complete with wireless function. Adjustment with angle settings from +50° to -50° perpendicular to the cutting axis with corresponding fine adjustment. Angle detection system on magnetic strip and LCD display. Real-time updating of the position of the fence, with 3 LCD displays, when changing the saw blade swivel and/or the cutting angle. - Motor power 9kW (12hp) 50Hz - 11kW (15hp) 60Hz - Inverter for electronic speed control from 3000 to 5000 rpm Fedpfxez Ny R Re Akyegh

Condition: used, Year of construction: 2011, functionality: fully functional, power: 3.73 kW (5.07 HP), cutting height (max.): 440 mm, cutting width (max.): 600 mm, pivoting range: 60 °, total height: 1,700 mm, total length: 2,900 mm, total width: 1,300 mm, overall weight: 1,320 kg, Equipment: CE marking, We offer this used semi-automatic band saw TOP-PORĘBA BMT460DSA, year of manufacture 2011. Motor power: 5 HP Cutting diameter at 90° (round cross-section): 460 mm Cutting dimensions at 90° (square): 460 x 460 mm Fsdpeyv Ai Hofx Akysgh Cutting dimensions at 90° (rectangle): 440 x 600 mm Cutting diameter at 45° (round cross-section): 445 mm Cutting dimensions at 45° (square): 445 x 445 mm Cutting diameter at 60° (round cross-section): 295 mm Cutting dimensions at 60° (square): 295 x 295 mm Blade dimensions: 41 x 1.3 x 5330 mm Machine weight: 1320 kg If you have any questions or require additional information, please send us a message or contact us by email.

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 16274986/1, functionality: fully functional, Multiripsaw for edging boards, max cutting height 125 mm, max passage 950 mm, el.power 75 kW operating panel, conveyors Fgedsz N Tfujpfx Akysh

Condition: used, functionality: fully functional, The LASKA WW 130-2 is an industrial meat grinder from the LASKA brand.. With a 130 mm throat diameter and 15 kW of power, the machine is designed for efficient raw material grinding in medium and large meat and food processing plants. How does the LASKA WW 130-2 meat grinder work? Raw material is loaded into the hopper, from where a screw feeds it to the cutting set consisting of a knife and perforated plates. The rotating knife cuts successive layers of material forced through the plate holes, producing uniform grinding at the required coarseness. The degree of grinding depends on the perforated plate used, and the cutting set can be quickly disassembled for cleaning and replacement of parts. Key advantages of the LASKA WW 130-2 meat grinder The large 130 mm throat diameter and 15 kW drive power allow continuous, efficient work with large batches of raw material, which suits high-volume plants. Solid industrial construction ensures a long service life, and the simple working system makes operation, cleaning, and maintenance easier. The IP 55 protection class stated on the nameplate means the electrical system is protected against dust and water jets, which is important in environments where equipment is regularly washed down. Technical specifications of the LASKA WW 130-2 meat grinder Manufacturer: LASKA Type: WW 130-2 Factory number: L 6850 Year of manufacture: 1999 Throat diameter: 130 mm Power supply: 3 x 400 V, 50 Hz Rated power: 15 kW Rated current: 28 A Protection class: IP 55 Capacity: up to approx. 5,000 kg/h Hopper capacity: approx. 175 l Compliance: CE Application of the LASKA WW 130-2 meat grinder Fjdpfx Ajz N Ax Rokysgh The LASKA WW 130-2 meat grinder is used in meat processing plants for grinding meat in the production of cold cuts, sausages, minced meat, and fillings. The machine also performs well in other food processing plants, wherever efficient grinding of large quantities of raw material is required.

Condition: good (used), Year of construction: 1998, functionality: fully functional, Bandsaw automat Behringer HBP 303A / PCM Year of manufacture: 1998 Including magazine for up to 9 tons Magazine dimensions: (L x W x H) 480 x 400 cm Capacity for 9 bars. Length approx. 8 m The bandsaw automat is fully functional and currently still in use in production. An inspection while the machine is running can be arranged. Available from December 2026! Cutting range: 260 mm Saw motor drive power: 4 kW Total drive power: 15 kW Fedpfjz E Np Hex Akyogh Cutting speed: 10 - 120 m/min. Machine dimensions (L x W x H): 320 x 260 x 220 cm Weight: approx. 2500 kg

Condition: used, Year of construction: 2022, functionality: fully functional, For sale, starting from our location in 45888 Gelsenkirchen, are two Inject Star P-60 residual meat recovery systems, including bone crushers and accessories. These systems are used, manufactured in 2019 and 2022, and come from a business liquidation. Currently, both systems are still operational and can be inspected on-site by appointment. Disassembly, loading, and transport are the responsibility of the buyer. Fedpfoz Iz Tcox Akyegh

Condition: used, Year of construction: 1992, Panel saw Manufacturer: Altendorf Model: F45 Year of manufacture: 1992 Sliding table length: 3,200 mm Cutting width: 1,250 mm Cutting height: approx. 1,450 mm Fgjdoz I Tqaspfx Akyjh Power: 5.5 kW Saw blade diameter: max. 450 mm Speeds: 3000 - 4000 - 5000 rpm Scoring saw: No Motor brake: No

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Kaltenbach KKS 450 U metal cutting circular saw (2021) Manufacturer: Kaltenbach Type: KKS 450 U Year of manufacture: 2021 Condition: used, very good Clamping, sawing, retraction, opening – all easily controlled with the push of a button Semi-automatic miter circular saw Working range 150 mm Saw blade diameter up to 450 mm Miter adjustment 180° Adjustment of the cutting height via push button Fodszwhwvopfx Akyegh Two cutting speeds Scope of delivery: - Documentation - 2m infeed roller conveyor - 2m outfeed roller conveyor with digital material stop - 2x saw blades

Condition: used, Year of construction: 2021, machine/vehicle number: 32687, Centauro R 1000 with solid wheels and RTF 400 feeder, manufactured in 2021. 40 HP three-phase motor, automatic hydraulic saw blade tensioning, 2 stellite saw blades 6570 x 100 x 1 mm with a tooth pitch of 25, and an additional cast iron feed roller with a diameter of 200 mm. Fedpfx Aksz Ngg Ssyegh

Condition: good (used), Year of construction: 2016, machine/vehicle number: 163231001, Technical data: - Saw blade dimensions: 3375 x 27 x 1.1 mm - Cutting speed, continuously adjustable: 18 - 100 m/min - Hydraulic cutting pressure control - Hydraulic lifting and lowering of the saw frame - Machine table can be swiveled to the left and right for miter cuts - Cutting range - at 90°: round 255 mm - square: 240 mm - flat: 300 x 180 mm - at 45°: round 210 mm - flat: 200 x 160 mm - at 60°: left, round 135 mm - Max. opening width of the vise: 310 mm - Drive: 400 V / 2.2 kW Fgjdez I Rkdspfx Akyoh - Space requirement: approx. W 2000 x H 1500 x D 2100 mm - Weight: approx. 990 kg - Includes: - Infeed roller conveyor: 5000 mm - Outfeed roller conveyor with measuring stop: 5000 mm

Condition: good (used), Year of construction: 1985, Cold circular saw, metal circular saw, miter saw, circular saw, sawing system, metal saw Fgodpfx Aksz Hwc Rjyoh -Manufacturer: MEP, Cold circular saw, metal circular saw type TRL 300, swivels on both sides -Engine: Type C 112 M -Power: 2.2 / 3.0 kW -Speed: 720 / 1450 rpm -Saw blade: Ø 300 mm -Cutting area at 90 degrees flat: 110 x 70 mm -Cutting range at 45 degrees: 100 mm -Dimensions: 1100/720/H1490 mm -Weight: 227 kg

Condition: excellent (used), Catalog number: 8122 TECHNICAL DATA - Cutting width: 300mm - Max. material width: 350mm - Max. cutting height: 140mm - Max. blade diameter: 400mm - Spindle diameter: 70mm - Main motor power: approx. 18.5kW - Feed motor: 1.1kW - From above: - 2 rows of pawls/ejectors Fodpfjz N Hhiox Akyogh - 2 toothed draw rollers - From below: - Guide strip - Slip roller - 2 toothed draw rollers - Blade shaft - Slip roller - 2 toothed draw rollers (outfeed) - 3 feed speed settings + stepless speed control via inverter + forward/reverse - Diameter of dust extraction nozzle: 200mm - Overall dimensions (L/W/H): 2830x1200x1720mm - Weight: 998kg ADVANTAGES - Made in Poland - Multi-blade arbor saw - DTR documentation available - Used multi-blade saw, very good condition Net price: 24,900 PLN Net price: 5,790 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Year of construction: 2014, condition: like new (used), functionality: fully functional, SCA Mini 400P with a 400 mm saw blade Fgedpfxsz H Ni Ao Akysh Single-head saw with a saw blade that moves from below and can be swiveled. The feed side is on the left for making miters from 15° to the left up to 15° to the right, as well as intermediate miters. + Fermo VIS 3780 DX stop/measuring system with digital display Profile support and length stop, adjustable via handwheel with readings on a digital display. + 4-meter roller conveyor

Condition: used, Year of construction: 2022, Manufacturer: Scott Automation / Bladestop Model: BST400-RH Year: 2022 Condition: Used Serial number: 1007/22-414 Fedsz Nir Dspfx Akyjgh Stock number: 3446 Cutting height: 420 mm Cutting width: 390 mm Saw blade: 3290 x 16 x 0.56 mm Compressed air: 6 - 7 Bar Power: 3 x 400V, 50Hz, 3kW Dimensions: 1100 x 1150 x 2100 mm Weight: 360 kg Glove check: Glove detection by means of color-sensitive scanning with a high-frequency camera.

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 9556, saw blade diameter: 350 mm, type of input current: three-phase, Pneumatic cutoff saw for solid wood, Stromab TR 350, year of manufacture 2023. Connection 3 x 400 V, CE version. Support table of 1000 mm to the left and right of the saw, pneumatic drive for the saw unit, automatic separation of small pieces, safety control with 2 hands, brake motor, emergency stop, and protective guard. Widia saw blade 350 x 30 mm, motor power 4 HP at 3000 rpm, work table height 800 mm, 2 dust extraction ports with a diameter of 80 mm. Sawing capacity 150 x 80 mm and 210 x 30 mm. Equipped with an extended roller conveyor and manual lateral guide. Fgedpfxez Ngkqe Akyeh

Condition: excellent (used), Catalog number 8121 TECHNICAL DATA - max. blade diameter 300mm - spindle diameter 30mm - blade guards 2 pcs - pneumatic cutting (blade movement up/down) - sawing units adjustable at a 45° angle - manual adjustment of sawing unit spacing - min. cutting length at 90° 740mm - max. cutting length at 90° 2820mm - cutting width 140mm - cutting height at 90 degrees 90mm - pneumatic clamps 2 pcs - control pedal - material support - 2 types of rotational speeds 3000/4500 rpm - main motor 2×1.62kW - dust extraction nozzle diameter 2x80mm - dimensions L/W/H 3750x1200x1450mm - weight approx. 500kg ADVANTAGES – unpainted – tilting sawing units – DTR + CE documentation – used saw, very good condition Net price: 18900 PLN Net price: 4395 EUR, depending on the exchange rate of 4.30 EUR Fgsdpfx Akjz Nhm Toyeh (Prices are subject to change due to significant fluctuations)