Used Measuring Cabin for sale (10,890)

Condition: used, Rohde & Schwarz Radio Frequency Interference Receiver Type: ESPI3 Frequency Range: 9 kHz to 3 GHz IF Resolution Bandwidths (RBW): 200 Hz (CISPR), 9 kHz (CISPR), 120 kHz (CISPR), 1 MHz, as well as 10 Hz to 10 MHz in 1-3-10 steps CISPR Bandwidths: < 150 kHz = 200 Hz, 150 kHz–30 MHz = 9 kHz, > 30 MHz = 120 kHz Detectors: Max Peak, Min Peak, Quasi-Peak (CISPR 16), Average, RMS Up to 3 detectors can be activated simultaneously Input Attenuation: 0 dB to 70 dB in 10-dB steps Optional Preamplifier ESPI-B2: 9 kHz to 3 GHz, 20 dB gain Noise Figure: approx. 18 dB without preamplifier, approx. 10 dB with preamplifier Start and stop frequency can be set freely Step width can match the reception frequency (harmonic measurement) Display Units: dBm, dBµV, dBµA, dBpW, dBpT Measurement Functions: EMI according to CISPR, APD, CCDF, Continuous and Single Measurement Weight: 1 kg Condition: used Hsdpszimlvefx Aitonu Scope of Delivery: (See image) (Subject to changes and errors in the technical data and specifications!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 151255, measuring range X-axis: 750 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 500 mm, workpiece weight (max.): 250 kg, total height: 3,020 mm, type of input current: AC, total width: 2,092 mm, total length: 2,140 mm, overall weight: 4,500 kg, table width: 900 mm, table height: 860 mm, table length: 1,300 mm, travel speed (max.): 520 mm/min, table load: 250 kg, ambient temperature (max.): 40 °C, ambient temperature (min.): 15 °C, maximum load weight: 250 kg, Equipment: type plate available, For sale is a used ZEISS GageMax 7/5/5 Navigator 3D coordinate measuring machine with serial number 156521 and manufactured in 2011. The machine has a measuring range of 750 × 500 × 500 mm and is designed for workpieces up to 250 kg. It is equipped with a ZEISS VAST XT probe system. The measuring volume also includes a multi-probe changer with various probe holders. According to the original auction description, the offered lot includes accessories and computer equipment. The available images show, among other things, a computer, monitor, keyboard, mouse, and other components belonging to the machine. The scope of delivery is based on the images or the components available during inspection. Hedpfxoz Ebzbe Aitenu Technical data: Manufacturer: ZEISS Model: GageMax 7/5/5 Navigator Serial number: 156521 Year of manufacture: 2011 Measuring range X/Y/Z: 750 × 500 × 500 mm Maximum workpiece weight: 250 kg Probe system: ZEISS VAST XT Multi-probe changer included Computer equipment included Last documented calibration: 02/2025 The machine is in used condition. A current functional test was carried out by ZEISS. An on-site inspection is possible by arrangement and is expressly welcome. The machine is preferably sold for collection. Loading and transport can be arranged by agreement. Scope of delivery as shown in the images. Subject to prior sale.

Condition: like new (used), Year of construction: 2014, operating hours: 100 h, functionality: fully functional, Almost unused professional 3D scanner. Hnsdpfx Ajz Ep I Ajitou

Condition: used, Weiss Type: WT 5.1'/ Mini-SHED for diurnal loss measurements Test chamber dimensions: Width 1600 mm x Depth 2140 mm x Height 2150 (usable 1600) mm Housing dimensions: Width 1760 mm x Depth 3100 mm x Height 2790 mm Maximum floor load: 250 kg Operating temperature range: +18 °C ... +45 °C (at higher temperatures, SHED operation is only possible without a Tedlar bag) Temperature range: +18 °C ... +45 °C Temperature stability: ≤ ±1 K (over time) Temperature change rate (heating and cooling): approx. 0.5 K/min, without test specimen Channel connection (air inlet and outlet): ∅ 80 mm, in the rear wall of the chamber Shut-off valve, gas-tight (air inlet and outlet): ∅ 80 mm, gas-tight, pneumatic operation. Delivery scope: Connection flange of the shut-off valve Cooling water consumption: approx. 0.8 m3/h Voltage: 230/400 V; 3 phases + N + PE; 50 Hz Rated power: 4.1 kW Rated current: 14.0 A Weight: approx. 2500 kg Type: WT 5.1'/ Condition: used Sale from current location Scope of delivery: (Only the Weiss emissions test chamber WT 5.1' + Mini-SHED) (Changes and errors in the technical data are subject to change!) Hnodezd Slkopfx Aitju We will be happy to answer any further questions you may have by telephone.

Condition: used, Keyence KEYENCE XM-2000 with XM-H1000 – 3D Coordinate Measuring System (CMM) Year of manufacture: 2020 Professional handheld measuring system for precise 3D measurements directly in the production environment. Hnsdpfx Aijzii Dnetju Item description: For sale is a used KEYENCE XM-2000 coordinate measuring system, including the XM-H1000 handheld probe. This innovative system enables precise 3D measurements directly at the workplace – without a measuring room, without complex setup, and without specialized CMM knowledge. The device is ideally suited for manufacturing companies, quality assurance, initial sample inspection reports (ISIR), in-process controls, and reverse engineering. Technical data – KEYENCE XM-C1000 / XM-H1000 (XM series) Measuring system (general) Feature: Measuring range (XYZ) approx. 600 × 300 × 200 mm (depending on the configuration) Measuring accuracy ±(8 + L/80) µm (L = measuring length in mm) Repeatability ±3 µm (typical) Resolution 1 µm Measuring principle - Optical tracking with camera-based detection Calibration - User calibration possible with calibration sphere CAD comparison - Directly on the device (STEP, IGES, etc.) Export formats - PDF, Excel, CSV, DXF Tolerance evaluation - Automatic with color comparison XM-C1000 – Control and evaluation unit (controller) Component: Display - 15-inch touchscreen Connections - USB, LAN, HDMI, power connection Storage options - Internal + USB export Software functions - Measuring, CAD comparison, report generation Operation - Touchscreen + button operation Languages - Multilingual (including German) XM-H1000 – Handheld measuring probe Feature: Probe type - Handheld with push button Feedback - LED status indicator, vibration signal Probe tip - Replaceable, various tips available Tracking - Detected via the controller's camera system System properties Feature: Operating temperature: 10 – 35 °C Voltage supply: 100–240 V AC, 50/60 Hz System size (complete) - approx. 800 × 600 × 800 mm (depending on the configuration) Weight (total system) - approx. 25–40 kg (depending on the configuration) Mounting - On table or optional measuring table Scope of delivery: KEYENCE XM-2000 control and evaluation unit KEYENCE XM-H1000 handheld measuring probe XM-C1000 (controller) Camera unit / tracking module Connection cables and power supplies Condition: Used, fully functional, in very good condition. Shipping & delivery: Shipping by freight forwarder Self-collection possible by arrangement. International shipping possible upon request. If you have any questions, require further information, or would like to arrange a viewing appointment, please do not hesitate to contact us. (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, FARO Measuring arm / 3D coordinate measuring arm FARO Prime measuring arm Mobile 3D measuring system / Portable CMM for industrial metrology For sale is a used FARO Prime measuring arm including accessories, transport case, and HP laptop. The measuring arm is suitable for mobile 3D measurements, quality control, component testing, reverse engineering, toolmaking, fixture construction, and industrial metrology. Technical data Manufacturer: FARO Technologies Type: Prime Device type: Portable 3D coordinate measuring arm / Portable CMM Date of manufacture: 10.09.2013 Calibration date according to certification: 25.06.2015 Revision: 28.1 Made in Switzerland Measuring range: approx. 1.8 m (6 ft) Axes: 6 Single point accuracy: 0.019 mm Volumetric accuracy: ±0.027 mm Repeatability: up to 0.016 mm Bluetooth wireless technology Integrated battery operation Temperature compensation Portable measuring arm technology USB interface Compatible with multiple probe systems Weight of measuring arm: approx. 9.3 kg Total weight including case and accessories: approx. 35 - 50 kg Equipment Mobile FARO Prime measuring arm Reference sphere / Calibration sphere Measuring probes / Probe set Base plate / Mounting plate Transport case HP EliteBook laptop Software data carrier USB dongle Operating instructions / Manuals Accessories according to pictures Application areas 3D coordinate measuring technology Quality assurance Incoming goods inspection First article inspection Component control Reverse engineering Tool and mold making Fixture construction Mechanical engineering Automotive industry Aerospace technology Condition Used Optical condition according to pictures Scope of delivery as shown in the pictures A complete technical function test has not been carried out Scope of delivery Hnedpezc Erpjfx Aitou 1x FARO Prime measuring arm 1x Transport case 1x HP EliteBook laptop 1x Reference sphere 1x Base plate Measuring probes / Probe set Software data carrier USB dongle Documents and other accessories according to pictures The table shown in the photos, or other items not explicitly mentioned, are not part of the sale. Shipping or freight forwarding is possible. Subject to change, errors and prior sale. We are happy to answer any further questions by telephone.

Condition: good (used), functionality: fully functional, Measuring devices from the dismantling of a battery cell production line. Sold individually or as a package. HIOKI 3153 automatic insulation/voltage withstand tester - AC/DC HIOKI BT3562A - Battery tester, 100 V, 3 mOhm Hjdpfjz Hbfvex Aitjnu HIOKI BT3563A - Battery tester, 300 V, 3 mOhm HIOKI DM7275-01 - Precision DC voltmeter

Year of construction: 2020, condition: used, Offered for sale is a manual powder coating booth with a cartridge filter system. Technical data: Usable volume: 9.5m³, airflow rate: 12000m³/h, downward air velocity: 0.25-0.3m/s, total filter area: 160m², maximum powder melting point: 220°C, maximum dimensions X/Y/Z: 2200mm/200mm/2000mm. Control system: Integrated spray gun and control unit for manual powder coating. Equipment: Booth, platform, filter system, eight cartridges. Operation: 2020/2021 two-shift operation, subsequently approx. 30% daily utilization. System documentation available. Inspection possible by arrangement. Hodpfxez Rn Dnj Aitjnu

Condition: used, Year of construction: 2008, functionality: fully functional, total width: 227 mm, total length: 840 mm, total height: 505 mm, overall weight: 55 kg, We are offering this used Endress+Hauser Promass 83F80 DN80 Coriolis flow measurement system, manufactured in 2008. Manufacturer: Endress+Hauser Model: 83F DN80 Year of manufacture: 2008 Condition: used, in excellent condition Type: Promass Coriolis flow measurement system Hnedpfx Aijz Ey S Sjtsu If you have any questions or would like more information, please send us a message or call us. Multiple products are available; if you are interested, please contact the seller: Derikxgebruikstesturingenenmeer.

Condition: good (used), Year of construction: 2025, functionality: fully functional, Fiber optic testing device, EXFO OTDR AXS-120 SM1, new, purchased in 2025, includes 2 x 500-meter cables. See photos for details. Please refer to the manufacturer for information on functions and device specifications. Hnedpfxoz Hw T Ao Aiteu

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: PH-54114, For sale: high-precision optical measuring machine/scanner – VICI VISION - Model: MTP 120 – 230 SCEPM - Year: 2014 - Serial No.: PH 54114 Hsdpfoz Iyrkox Aitsnu For sale: a complete, high-precision optical measuring scanner—in like-new condition—designed for the accurate and rapid measurement of complex geometries, including radii, angles, irregular bores, gears, complex curves, ellipses, etc. The device offers high precision and is suitable for the rapid generation of inspection certificates meeting the strictest standards (e.g., for measuring Swiss watch gears). The measuring system has been maintained and serviced by the manufacturer, VICI VISION. It is an indispensable tool for serial production. The unit is connected to the power supply and ready for immediate operation.

Condition: used, Mitutoyo Type: QS250Z Mitutoyo QS250Z CNC Vision Measuring Machine – Year of manufacture 2017 – including software & accessories For sale is a high-quality Mitutoyo QS250Z CNC Vision Measuring Machine from 2017, in very good condition. It is a precise optical coordinate measuring machine for non-contact measurement of workpieces. Ideal for quality assurance, incoming goods inspection, production, precision engineering, electronics, plastics technology, and more. What can the device do? The QS250Z is a CNC-controlled optical measuring machine for: 2D coordinate measurement Contour and profile measurement Measurement of distances, radii, angles, and diameters Measurement of holes, grooves, edges, and complex geometries Serial measurements with automated measuring programs Documentation and report generation via Mitutoyo software Measurement is performed non-contact using a high-resolution camera system with image processing. Ideal for sensitive or small components where tactile measurement is not suitable. Thanks to CNC control, automated measuring sequences are possible – perfect for recurring testing processes. Technical data: Model: Mitutoyo QS250Z Machine type: CNC Vision Measuring Machine Year of manufacture: 2017 Code No.: 359-508-10Y Manufacturer: Mitutoyo Corporation, Japan Electrical data: 200–240 V AC 50/60 Hz Power consumption: approx. 500 W Fuse: 250V T 2.5A Dimensions (approx.): Width: approx. 700–800 mm Depth: approx. 900 mm Height: approx. 1,100 mm Weight (approx.): approx. 150–200 kg Important note: Hodpsynkbajfx Aitjnu “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (See image) Mitutoyo QS250Z main unit Joystick box Software package: QS-ConfigDisk QSPAK FORMTRACERPAK-AP MiCAT Vision / Form Manuals & documentation Various electronic circuit boards (see images) Other accessories as shown (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: good (used), Length measuring system – SIP – Société Genevoise d’Instruments de Physique Hjdpfx Aoz Nv Dmsitenu Type/Model: SIP 300 M Condition: Used Year of manufacture: 2001 Technical data: Design: Motorized length measuring bench Measuring range: 300 mm Measuring system: Original steel scale Measuring accuracy/uncertainty: 0.25 µm Motorized: Yes Accessories: - Various accessories as shown in the images Request item: Transportation costs will be provided in a separate quote.

Condition: used, Mahr Type: Helio-Pan II 700 Hodpfx Aozd R U Djitenu Helio-Pan II Max. workpiece weight 30 kg at center height 100 mm 80 kg at center height 150 mm Measuring range, length: 0 mm to 700 mm Measuring range, outer diameter: 0 mm to 120 mm Max. measurable runout: 100 mm Center height: 100 mm Measuring probes: probe and measuring slide, 1 mm x 5 mm Dimensions (W x D x H) Machine: 2060 mm x 920 mm x 1750 mm Controller box: 600 mm x 800 mm x 2200 mm Weight: approx. 900 kg Electrical power: 230 V / 1200 W / 50 Hz Air pressure: 6 bar Condition: used Scope of delivery: (See picture) (Subject to changes and errors in the technical data!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, measuring range X-axis: 700 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 600 mm, Used Machine - Mitutoyo Crysta Apex C7106 Here I offer a very well-maintained 3-D coordinate measuring machine from the manufacturer Mitutoyo. The machine is built in 2004. The machine was used exclusively in an air-conditioned measuring room. It is a TOP equipped machine with which you can start immediately! Of course, we can also offer transport, setup and commissioning as well as calibration (factory or DAkkS) so that you do not have to worry about the individual items! Hnsdpevpdhxofx Aitsu Specifications see attached PDF. Leasing possible. (All prices are NET)

Condition: used, Year of construction: 2021, functionality: fully functional, Equipment: type plate available, We are offering this used Keyence VHX-S750E measuring system, manufactured in 2021. Model: VHX-S750E Serial number: 8B120052 Country of origin: Japan Features: • VHX-7000 camera head • Motorized stand • Control panel (Remote Console) • Integrated VHX monitor • Specimen stage • Standard lighting unit • Housing in good condition • No obvious damage Hnedpfx Aijz Hipvstsu 1. Software license available, but not accessible; no USB stick included. 2. No written proof of functionality; the microscope can be tested before purchase. 3. No additional lenses available. 4. No calibration certificates. 5. Manufactured around 2021; originally purchased as new. 6. Includes the original PC/controller in the scope of delivery. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2015, functionality: fully functional, type of input current: AC, travel distance X-axis: 900 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 800 mm, input voltage: 240 V, Equipment: CE marking, documentation/manual, type plate available, We offer this used Hexagon Advantage coordinate measuring machine, year of construction 2015. Manufacturer: Hexagon Model: Advantage Year of construction: 2015 Type: Coordinate measuring machine Hnjdoz Itb Eopfx Aitsu If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2022, Keyence VL-500 measuring head, VL-570 control unit, VL-500 device base, VL-550 optical 3D coordinate system scanner. Used, from a business liquidation. First purchased 03/2022. Technical data and information according to the manufacturer: 3D coordinate system control unit VL-500 Device base Keyence VL-550 3D measuring head Keyence 570 Measuring accuracy: ± 10µm according to VDI/VDE 2634 Part 3 Standard measuring mode: 4 million measuring points Fine measuring mode: 16 million measuring points Motorized rotary table: XY and 360° rotation Repeatability: 0.002mm Measuring accuracy: +- 0.01mm Max. workpiece weight: 50kg 3D scanner / laser scanner Without Keyence computer with Windows 11 and extensive evaluation software (GD&T) Without dongle Without monitor, keyboard and mouse Without manuals We recommend an inspection to avoid misunderstandings. Information without guarantee Information, details and technical data from the manufacturer. To prevent any misunderstandings regarding the condition of the item and the scope of the auction, we generally recommend an inspection BEFORE placing a bid! Further technical data can be requested from the manufacturer. Our business hours are from Monday to Friday between 8:30 am and 12:00 pm and 1:00 pm to 4:30 pm. During this time, inspections and collections are possible and desired AFTER prior appointment. Hnsdpfx Aez H Sa Doitsu Subject to prior sale, changes, errors and printing errors.

Condition: used, Nirox Sensor Nirox multi-Thick-MS1-CH1 Nirox multi-Thick-MS1-CH1 – Sensor for multi-layer thickness measurement For sale is a high-quality optical sensor of the type Nirox multi-Thick-MS1-CH1, developed for the precise and non-contact measurement of multi-layer materials such as plastic films, composite materials, or coated substrates. This sensor system is ideally suited for quality control in the plastics or packaging industry. Technical highlights: Model: multi-Thick-MS1-CH1 Manufacturer: Nirox s.r.l. (Italy) Function: Optical precision sensor for micrometer-accurate thickness measurement of individual layers Measurement method: A-scan / optical interference analysis Channel: 1 (CH1) Application areas: In-line measurement in production lines or laboratory use Hnedpoziiw Usfx Aiteu Typical materials: Multi-layer films, coated glass, technical laminates Condition: used Scope of delivery: (See image) Sensor multi-Thick-MS1-CH1 Connection cable (Changes and errors in the technical data and information are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, Wente CamSorik GmbH Laser measuring system / 3D laser measuring camera Wente CamSorik LaserCam_hs LC691103 Complete laser measuring system with tripod system, laptop, LaserCam_hs software, and documentation For sale is a used laser measuring system from the manufacturer Wente CamSorik GmbH. The system is suitable for non-contact measurements, 3D measurement technology, quality control, position detection, as well as industrial measuring and automation tasks. Technical data: Manufacturer: Wente CamSorik GmbH Model: LaserCam Type: LaserCam_hs Serial number: LC691103 Year of manufacture: 2018 Made in Germany Hnjdpfjz Ndq Hsx Aitju Laser class: 2 Wavelength: 630–690 nm Laser power: < 1 mW Standard: EN 60825-1:2007 Network interface: Ethernet (RJ45) IP address: 192.168.1.121 Dimensions of sensor unit (approx.): 620 × 240 × 240 mm (L × W × H) Total weight including accessories and tripods: approx. 28 kg Software / Laptop: Acer TravelMate laptop LaserCam_hs Version 7.2.10.555 Wente CamSorik GmbH LaserCam_high speed documentation available Equipment: LaserCam_hs sensor unit COLA receiver / transmitter LED ring light Ethernet interface Industrial connector 2 × Manfrotto professional tripods Acer laptop including power supply LaserCam_hs software Documentation Connection cables and accessories as shown in the pictures Application areas: Industrial measurement technology 3D measurement technology Quality control Robotics and automation Research and development Production monitoring Scope of supply: Wente CamSorik LaserCam_hs LC691103 2 × Manfrotto professional tripods COLA receiver / transmitter Acer TravelMate laptop including power supply LaserCam_hs software version 7.2.10.555 LaserCam documentation Connection cables and accessories as shown in the pictures Condition: Used Laptop and LaserCam_hs software have been started. Optical condition as shown in the pictures. Normal signs of wear and tear. The table shown in the photos and other items not explicitly mentioned are not included in the sale. Shipping by freight forwarder is possible. Subject to change, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: excellent (used), Year of construction: 2020, operating hours: 450 h, functionality: fully functional, total height: 400 mm, total width: 800 mm, total length: 800 mm, travel distance X-axis: 5,000 mm, travel distance Y-axis: 5,000 mm, travel distance Z-axis: 5,000 mm, overall weight: 50 kg, repeat accuracy: 0.01 mm, Equipment: documentation/manual, KEYENCE WM-3000 Mobile 3D Coordinate Measuring System, Year of Manufacture 2020 For sale is a mobile 3D coordinate measuring system, KEYENCE WM-3000, year of manufacture 2020. The WM-3000 enables flexible and precise 3D measurement of components directly in production or at a testing station. Thanks to the optical tracking technology and the wireless measuring probe, the system is particularly suitable for dimensional accuracy checks and for comparing the actual and target dimensions of complex components. Technical data: Manufacturer: KEYENCE Type: WM-3000 Year of manufacture: 2020 Mobile 3D coordinate measuring system Measuring range: 5,000 mm Measuring accuracy: approx. ±28 µm Repeatability: up to approx. 10 µm Optical 3D measurement Wireless measuring probe Supply voltage: 220 V Weight: approx. 50 kg External dimensions: approx. 800 × 800 × 400 mm Suitable for: 3D dimensional inspection Quality control Actual vs. target comparisons Hjdjz Aynkopfx Aitonu Measurement of complex components Use directly in production The device is offered as used. Condition and scope of delivery, see photos or upon request. Subject to technical changes and errors.

Condition: good (used), functionality: fully functional, Keyence VHX 700F Measurement Microscope in fully functional condition. - Base unit VHX 700F - Stand VHX-J20 - Objective lens VH-Z20R - Reference object (calibrated glass scale) - User manual Camera Scanning method: Progressive Image sensor: 1/1.8-inch, 2.11 megapixel CCD sensor Total pixels: 1688 (H) x 1248 (V) Effective pixels: 1628 (H) x 1236 (V) Usable pixels: 1600 (H) x 1200 (V) Frame rate: Selectable 15 fps and 28 fps Resolution: 2 megapixels, 1600 (H) x 1200 (V), approx. 1000 TV lines Gain: AUTO, NORMAL, PRESET Electronic shutter: AUTO, MANUAL, OFF, 1/15, 1/30, 1/60, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/5000, 1/9000, 1/19000 Supercharge shutter: 0.2 seconds to 17 seconds adjustable in 0.1 second increments White balance: Auto, Manual, One-touch setting, Preset (2700 K, 3200 K, 5600 K, 9000 K) Back focus adjustment: Not required LCD Monitor: 17-inch color LCD (TFT)*1 Panel size: 365.76 (H) x 228.6 (W) mm*1 Pixel pitch: 0.1905 (H) x 0.1905 (W) mm*1 Number of pixels: 1920 (H) x 1200 (W) (WUXGA)*1 Display colors: Approx. 16,770,000 colors *2*1 Brightness: 270 cd/m² (typical)*1 Contrast ratio: 450:1 (typical)*1 Viewing angle: ±80° (typical, horizontal), ±70° (typical, vertical)*1 Hard Drive 500 GB (including 80 GB reserve capacity) Approx. 2.1 million images (with compression of a 2-megapixel image) or approx. 70,000 images (if 2-megapixel images are uncompressed) Image format JPEG/HD Photo (compressed), TIFF (uncompressed) Viewable image size: 1600 pixels (H) x 1200 pixels (V) Light source: Lamp 12 V, 100 W, halogen lamp Video output: Output format DVI-I, 1920 x 1200 pixels Output Scan frequency Hnodpfxjw Ah Axe Aitju

Condition: ready for operation (used), Mahr Marsurf XR 1, Marsurf SD 26 roughness measuring instrument, measuring instrument, granite measuring plate Mahr Marsurf XR1 with Marsurf SD 26 feed unit: Measurement of roughness, waviness, and profiles Measuring range: ±250 µm Measuring range with longer stylus arm: up to ±750 µm Vertical resolution: up to 0.7 nm Measuring length: 26 mm Feed speed: 0.1–1.0 mm/s Positioning speed: 5 mm/s Motorized height adjustment: 7.5 mm Measuring force: approx. 0.7 mN Cut-off: 0.08 / 0.25 / 0.8 / 2.5 / 8 mm Individual measuring lengths: 1–50 Evaluation: Roughness, waviness, and profile Measured parameters: including Ra, Rq, Rz, Rt, Rp, Rv, RSm, Rsk, Rku, Rk, Rpk, Rvk Software: MarWin Measuring stand: MarSurf ST-D Measuring plate Hodez H Uklepfx Aitonu Dimensions: 600mm x 500mm Brand: Bilz Type: F60-50 Max. load capacity: 130 kg You are welcome to visit us for an inspection. We will gladly arrange a cost-effective shipping service for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and browse our other offers as well. The company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data as well as errors in the description of the item may occur and are subject to change.

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, type of input current: AC, input voltage: 230 V, Equipment: documentation/manual, Keyence XM-C1000 Portable Coordinate Measuring Machine / Measurement System Manufacturer: Keyence Model: XM-C1000 Condition: Used, fully functional For sale is a used Keyence XM-C1000 measurement system for precise 3D coordinate measurement of components and assemblies. The system enables fast and reproducible measurements without complex programming and is ideal for quality assurance, incoming goods inspection, first article inspection, and production monitoring. The XM-C1000 impresses with its ease of use, high measurement accuracy, and flexible application possibilities. Measurements of distances, diameters, positions, angles, and geometric tolerances can be performed and documented efficiently. Hnedpfxjztzm Ns Aitsu Technical features: Portable optical coordinate measuring system Precise 3D measurements Intuitive user interface Fast inspection processes Automatic measurement reports Ideal for production and quality assurance Condition: Used Fully functional Good optical condition Normal signs of wear and tear Inspection and functional testing possible by appointment Scope of delivery: Keyence XM-C1000 measurement system Existing accessories as shown in the picture Documentation

Condition: used, Renishaw Type: Equator 500 Hodozix Nmjpfx Aitjnu Year of manufacture: 2021 Item description: For sale is a Renishaw Equator™ 500, a high-precision, industrial 3D measuring and testing system for in-process and quality control in manufacturing. The Equator 500 is not a conventional coordinate measuring machine, but a comparative measuring system specifically designed for fast, repeatable measurements directly in the production environment. Ideal for serial production, in-process measurements, and automated inspection processes. The device is ideally suited for dimensional, form, and positional tolerance testing of workpieces and can be used to provide feedback to CNC machines. The software starts correctly, system status according to the display: "Started OK" (see photos). Functions & Applications 3D measurement of workpieces Comparative measuring principle (very fast inspection cycles) High repeatability in the µm range Real-time temperature compensation Suitable for shop floor use Automation capable (e.g. robot loading) Ideal for serial, sample, and process control Typical industries: CNC manufacturing Metalworking Automotive / supplier industry Machine and tool building Technical data (manufacturer's data / approximate values) Manufacturer: Renishaw Model: Equator™ 500 (H+150) Device type: Comparative 3D measuring system / CMM Measuring range: X / Y: Ø approx. 500 mm Z: approx. 150 mm Measuring principle: Comparative coordinate measuring technology Temperature-compensated measurement Accuracy: Very high repeatability Measuring accuracy in the µm range (application and strategy dependent) Control & Software Controller type: Equator 500 Software version: 2.5.21.1 RRTLOS version: 5.1.12 Operation via PC-based Renishaw software Electrical data Supply voltage: 230 V AC Frequency: 50 / 60 Hz Power consumption: approx. 1 kW Dimensions (approx.) Overall height: approx. 1,900 mm Footprint / diameter: approx. 1,200 mm Weight (approx.) 130 kg Condition: used Scope of delivery: (See image) Renishaw Equator™ 500 measuring system Controller / Industrial PC Monitor Keyboard and mouse Base frame Accessories as shown in the photos (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.