Used Marina Lathe for sale (5,494)

Year of construction: 2007, condition: ready for operation (used), Swing diameter over bed/cross slide: 1100mm/730mm, turning diameter: 1130mm, spindle bore: 128mm, rapid traverse: 5m/min, quill diameter: 140mm, quill stroke: 300mm, center height: 550mm, distance between centers: 3000mm, max. workpiece weight: 6000kg. Machine dimensions X/Y/Z: approx. 6700mm/2600mm/2300mm, weight: approx. 10500kg, control: Siemens, operating hours: 67647h. Documentation available. An on-site inspection is possible. Expected to be available from 2026. Hnodpfexph N Njx Afiju

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 2,200 h, machine/vehicle number: 7792, The advantages The machining spectrum was further expanded by flexible selection of the power-driven tools on the tool post of the SB-12/20R G. The main spindle is fitted by power-driven front drilling unit and saw unit as well as polygon unit and thread whirling unit. The use of power-driven tools on the rear side are now standard. FANUC 0i-TF control system C-axis control as standard on main and sub spindle completely independent backworking changeable from sliding head to fixed headstock lathe Hsdpfjlrvxwjx Afionu movable control panel low space requirement ideal replacement for cam-controlled lathes Kinematics & Tools 6 (7) turning tools front and rear side each with 4 drilling tools 4 + α power-driven tools on the tool post 4 + α power-driven tools for backworking 7 axes Kinematics of the SB-12R Front Side Number of axes 7 Main spindle (headstock) Z1 / C1 axis Tool post X1 / Y1 axis Max. machining diameter 12 mm Max. headstock stroke (sliding head / fixed headstock lathe) 205 mm / 30 mm Max. drive power 3.7 kW Max. main spindle speed 15,000 rpm Tools on the tool post Turning tools 7 tools (□ 10 mm) Drilling tools (4-spindle sleeve holder) 4 tools (ER16) Cross driven tools 4 (5) tools Speed 10,000 rpm Sub spindle Sub spindle X2 / Z2 / C2 axis Max. chucking diameter 12 mm Drive power 1.1 kW Max. sub spindle speed 12,000 rpm Backworking tools Drilling tools (4-station tool holder) 4 tools (Ø 22 mm sleeve) Drive unit (standard) 4 tools (ER16) Max. speed backworking 8,000 rpm

Condition: used, Year of construction: 2008, functionality: fully functional, turning diameter over cross slide: 380 mm, spindle bore: 72 mm, turning diameter: 580 mm, center height: 290 mm, turning length: 1,500 mm, bed width: 400 mm, Turning diameter in gap: 780 mm, overall weight: 3,200 kg, Centre height: 290 mm. Swing over cross slide: 380 mm. Swing in gap Ø: Ø780 mm. Distance between centers: 1500 mm. Spindlebore: 72 mm. Hnodpoxpf D Djfx Afisu RPM.: 25-2000 (Variable). Width of bed: 400 mm. Tail stock taper: 5 Motor: 11 kW. Digital readout: Newall C80 (X & Y). Year: 2008 Country of origin: Bulgaria. Size (L x W x H): 3100 x 1300 x 1600 mm. Weight: 3200 kg. Ø315 mm. selfcentering chuck, variable speed in 3 gears. Automatic feed and rapid speed through joystick. With quick tool changer. All our machines are tested and serviced before delivery.

Condition: used, Year of construction: 1999, functionality: fully functional, overall weight: 2,100 kg, Lathe Stanko Samat 400 S / 750 Lead and feed screw lathe; turning machine Hjdpjwxb T Nefx Afienu 2-axis digital readout Brand: Heidenhain Year of manufacture: 1999 Weight approx. 2,100 kg Chuck with a set of hardened jaws is mounted Accessories: machine feet, digital readout, 2-3 toolposts Operating manual Inspection under power possible by prior appointment. Price / details on request All technical information subject to typing errors/mistakes. We sell exclusively to countries of the European Community.

Condition: ready for operation (used), Year of construction: 1997, L & Z Lathe Colchester Model Triumph 2500 Year of manufacture: 1997 A-axis digital readout Swing over bed: 400 mm Distance between centres: 700 mm Centre height: 195 mm Hjdpexpfxujfx Afijnu Swing over cross slide: 246 mm Spindle bore: 54 mm Swing diameter in gap: 585 mm Infinitely variable spindle speeds: 14 – 2500 rpm Drive: 7.5 kW Tailstock taper: No. 5 Tailstock quill stroke: 145 mm Chuck Multifix toolholder with insert Digital readout Weight: 2.5 t Price: EUR 3,750.-- plus VAT, ex works

Condition: good (used), Beautiful heavy turret lathe Hodpfxof A A Rle Afionu

Year of construction: 2001, condition: ready for operation (used), A CNC lathe Okuma Soarer L270E is offered. Turning length: 500mm, turning diameter over bed: 530mm, max. spindle speed: 4200rpm, machine dimensions X/Y/Z: approx. 2800mm/1850mm/2000mm, weight: approx. 3700kg, control: OSP-U10L. Functional, spindle may need to be replaced. An on-site inspection is possible by appointment. Hnjdoxph Sqepfx Afiou

Condition: good (used), Year of construction: 2003, Hyundai Hit 30M CNC Lathe With Large Amount of Tool Holders and Driven Tooling Package. Driven tooling Simens sinumerik control Kitagawa 12” 3 Jaw chuck B-212 Max Rpm: 3300 Max swing: 580mm Swing on the carriage: 580mm Swing on the cross slide: 400mm Max Cutting Dia: 334mm Max cutting length (shaft): 990mm Standard cutting dia: 290mm Distance between section of main spindle and section of turret: 146-1136mm Max bar work capacity: 90mm Centre height (from ground): 1050mm Max support weight: 1000kg Main spindle nose: ASA A2-8 Main spindle taper: 1/16 Spindle bore: 104 dia Speed range of main spindle: 25-2500rpm Speed variation range of main spindle: Automatic speed variation Type of turret: VDI turret Number of tools: 12 Index time: 0.52 sec/ 1 step Tool size (outer dia): 25 x 150mm Tool size (inner dia): max 50mm Index coupling dia: 200mm Travel: X axis: 290mm Z axis: 1000mm Rapid traverse X: 18m/min Rapid Traverse Z: 24m/min Bed shape: Flat Bed width: 405mm Full automatic tailstock Tailstock quill stroke: 130mm Tailstock quill dia: 100mm Taper (sleeve): MT No5 Maximum thrust: 10kN Tailstock body stroke: 835mm Hnsdpowqyhcsfx Afiou

Condition: used, functionality: fully functional, turning diameter over cross slide: 375 mm, spindle bore: 90 mm, turning diameter: 560 mm, turning diameter over bed slide: 560 mm, center height: 280 mm, turning length: 2,000 mm, spindle speed (max.): 1,250 rpm, spindle speed (min.): 25 rpm, bed width: 385 mm, overall weight: 3,400 kg, Centre height: 280 mm. Hnedexpf A Hspfx Afisu Swing over cross slide: 375 mm. Swing in gap Ø: Ø830 mm. Distance between centers: 2000 mm. Spindlebore: 90 mm. RPM.: 25-1250. Width of bed: 385 mm. Tail stock taper: 5 Motor: 11 kW. Digital readout: Electronica EL-400 (X & Y). Country of origin:Germany. Size (L x W x H): 3650 x 1250 x 2000 mm. Weight: 3400 kg. With gap, quick tool changer, steady rest and Ø400 mm. 4-jaw independant chuck. All our machines are tested and serviced before delivery.

Condition: used, Year of construction: 2011, Technical details: turning length: 310 mm swing diameter over bed: 500 mm swing diameter over bed slide: 290 mm centre distance: 500 mm x-axis: 190 mm z-axis: z1: 335 / z3: 370 mm y-axis: 80 mm revolution per minute: 6000 U/min Control: Heidenhain CNC Pilot 4290 spindle bore: 73 mm bar material dia.: 50 mm tool turret - number of stations: 12 tool taper: VDI 30 mm rapid traverse x + z axis: 30 m/min operating hours - idle run: 36443 h spindle hours: 8545 h Hodow S Efzjpfx Afijnu interface: ja total power requirement: 20 kVA kW dimension swarf conveyor LxWxH: 3,2 x 0,45 x 1,5 CNC inclined bed lathe With a 3-jaw chuck Ø 160mm with matching flange (max. speed 4500 rpm) and 2 additional sets of spare jaws. Turret head for 12 tools all with tool drive; Sauter disk turret (C-axis = 300 rpm) Torque main spindle: 95 Nm at 100% and 127 Nm at 40% Chip conveyor 450 K-1/250; year of manufacture 2000 Electric cabinet with Rittal cooling The machine does not have a hydraulic chuck. A manual chuck has been installed by the previous owner. The machine is not functional and is for sale. The machine has an unknown malfunction in the turret, meaning that reference travel and axis movements are not possible. Machining functionality is therefore currently not possible. The machine is for sale and in need of repair! i.D. *

Condition: good (used), Year of construction: 2007, functionality: fully functional, turning length: 530 mm, turning diameter: 370 mm, spindle speed (max.): 4,000 rpm, spindle motor power: 13 W, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, Equipment: rotational speed infinitely variable, Mori Seiki Duraturn 2050 Year of manufacture: 2006/12 Initial commissioning: 2007 Control system: Fanuc 0iTB (MSC-504) Turning length: 528 mm Turning diameter: 354 mm Swing over bed: 609 mm Distance between spindle and tailstock: 545 mm X-axis travel: 200 mm Hnedpfxsxpcu Ho Afiju Z-axis travel: 370 mm Spindle bore: 65 mm Turret: 12 stations Tailstock Chip conveyor Dimensions (L x W x H): 2175.0 × 1850.0 × 1825.0 mm Weight: 4100 kg

Condition: used, Year of construction: 1979, Year 1979 Retrofit 2013 max. turning diameter 1300 mm table diameter 1000 mm workpiece height max. 1500 mm working lenght 1050 mm 280 U/min. T-slots 48 x 28 speeds 4,75 - 250 U/min Hnedpfx Afjxmk E Uoisu rapid traverse 6000 mm/min In our opinion, the machine is in good used condition and can be inspected condition and can be inspected under power by appointment. Retrofit 2013 Precision class: IT7 Technical features - 4-fold swivel head Accessories, illustrated tools and clamping devices are only included in the scope of delivery if this is noted in the additional information . Changes and errors in the technical data and information as well as prior sale reserved. subject to prior sale

Year of construction: 2005, condition: ready for operation (used), Turning diameter: 356mm, max. machining length: 705mm, travel X/Z: 260mm/795mm, speed: 4000rpm, spindle bore: 91mm, spindle power: 18.5kW, tool positions: 12. Machine dimensions X/Y/Z: approx. 2800mm/1900mm/2150mm, weight: approx. 6000kg, control: Mitsubishi/Fanuc. Including short bar loader LNS Quickload Servo III (1500mm), year of manufacture: 2006. The operating hours have a maximum display value of 9999h, therefore the exact runtime cannot be determined. Documentation available. An on-site inspection is possible. Hjdpfjxph Rgsx Afijnu

Condition: good (used), Year of construction: 2003, Machine weight: 8100 kg Brand: FANUC Model: 21i-TB Series Spindle speed range: 3500 rpm Spindle motor power: 18.5/22 kW Spindle diameter: 75 mm Number of tool slots: 12 Rotating tools: Yes Tool holder type: VDI40 Chip conveyor: Yes External coolant: Yes Chip conveyor: Yes Tool positioner: Yes Tool holder: Yes Bar feeder interface: Yes Rotating tool speed: 4000 rpm Rotating tool power: 5.5 kW Bed swing: 650 mm Carriage swing: 300 mm Maximum workpiece length: 1000 mm Hnedpfjwqx R Aox Afieu Diameter from the mandrel: 250 mm

Condition: used, Year of construction: 2010, swing dia. 440 mm max. turning diameter 220 mm turning length 450 mm travel -x axis 200 mm control FANUC 18i-TB max. helix angle 60 ° spindle bore 64 mm tool taper VDI 30 numbers of positions in the tool changer 12 CNC Lathe | COLCHESTER - TORNADO T6MS equipped with counter spindle and chip conveyor. Hnodovzcpljpfx Afisu The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: T6 MS | T6-MS | T 6MS | T-6MS | T-6

Condition: ready for operation (used), Year of construction: 1997, Padovani Labor E255 x 1500 cycle lathe Hnjdpfx Asxmkv Hjfiju Manufacturer: Padovani Model: Labor E255 x 1500 Year of manufacture: 1997 Condition: Used, good, powered and ready for demonstration

Condition: excellent (used), Year of construction: 2008, operating hours: 4,400 h, functionality: fully functional, Controller Fanuc 0i-TD Swing diameter over bed 400 mm Max. turning diameter D80 mm Max. turning length 220 mm Spindle bore of main spindle D26 mm Hnodpfx Aoxmkg Sjfieu Spindle bore of counter spindle D26 mm Speed ​​range with main spindle 100 - 6000 rpm Speed ​​range with counter spindle 100 - 6000 rpm Turret 8-fold X travel 80 mm Z travel 280 mm A travel (counter spindle) 220 mm X/Z rapid traverses 1200 mm/min Power of the main spindle 2.5 kW Power of the counter spindle 1.5 kW Max power required 5 kVA / 400V Weight cca.. 1600 kg Dimensions LxWxH = 2000 x 1200 x 1700 mm Accessories, features - There are collet chucks both on main- and sub-spindles - Spare tool holders (in Z axis the machine can work in two directions at the same time) - Automatic lubrication system - Cooling water equipment - Machine lamp - Bar feeder interface - Machine documentation on hungarian The machine is in very good condition. Ready for immediate use. Under power in Hungary.

Condition: as good as new (ex-display), EXHIBITION MACHINE For sale is a new HAGER HDE-59 BIG lathe with a center distance of 1,000 mm. The exhibition machine is in its original condition, so you have the full guarantee. Technical data - Motor 2.2 kW / 3 HP / 400 V - Speed levels: 100-450 rpm 300-1,100 rpm 750-2,700 rpm - Center height 250 mm - Center width 1,000 mm - Hand rest 350 mm - Direction of rotation switch - Spindle M33 x 3.5 mm with ASR (Euro) run-off safety groove - Spindle and tailstock cone MK3 - Hollow spindle D = 20 mm - Main spindle with 4 bearings - Quill travel 150 mm (with scale) - Total length 1,780 mm - Weight 235 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! If you are interested in this machine, please provide your full address details in the contact form so that we can process your request seriously! Thank you, your NEUREITER team Related terms: wood turning machine, lathe, lathe, turning, turning knife, wood turning, turning, machine, Hager Reference: R-A0117 Hsdotpnddjpfx Afisnu

Year of construction: 2005, condition: ready for operation (used), Two identical CNC lathes Mori Seiki are available. Turning diameter: 356mm, max. machining length: 705mm, travel X/Z: 260mm/795mm, speed: 4000rpm, spindle bore: 91mm, spindle power: 18.5kW, tool positions: 12. Machine dimensions X/Y/Z: approx. 2800mm/1900mm/2150mm, weight: approx. 6000kg, control: Mitsubishi/Fanuc. The operating hours have a maximum display value of 9999h, therefore the exact runtime cannot be determined. Documentation available. An on-site inspection is possible. Hodpfx Afjxph Raoionu

Condition: good (used), Year of construction: 2006, Puma 700M 2006 Hsdpfx Afjxpdrtsijnu Doosan Puma 700M CNC Lathe (2006) Controlled axes: 3, X: 470 (450+20)mm, Z: 1650mm, C: 360(0.001)gr Tools in revolver: 12 (BMT85) Spindle RPM: 3-1500, Rotating tools RPM: 30-3000 Automatic door Weight: 16,100 kg Note that this lot is located at Braås, Sweden

Condition: used, Year of construction: 1998, max. working diameter 20 mm max. working lenght 320 mm bore diameter 10 mm passage of spindle 24 mm Spindle speed 200 - 8.100 min -1 control MITSUBISHI Turning Automatic Lathe - swiss lathe | CITIZEN - M-20 equipped with bar feeder. Hodpfx Afsvnwf Ioienu The machine is in very good condition. A machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: M20 | M 20

Condition: used, TECHNICAL DETAILS - Number of axes : 2 MAIN SPINDLE - Spindle nose : A2-8" - Spindle power : 18.5 [kW] - Spindle speeds : 4000 [rpm] - Max. bar diameter : 76 [mm] - Max. turning diameter : 480 [mm] - Max. machining length : 760 [mm] Hnodpfoxcbt Isx Afisu - Max. diameter on bench : 780 [mm] TURRET - Number of positions : 12 - X/Z stroke : 260 x 830 [mm] - Rapid traverse rate : 30 [m/min] POWER SUPPLY - Supply voltage : 220 [V] - Total installed power : 40.72 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3.600 x 1.863 [mm] - Machine height : 1.900 [mm] - Machine weight : 5.500 [kg] MACHINE HOURS - Number of working hours : 19.781 [h] EQUIPMENT - CNC : Fanuc i Series - Coolant tank - Chips conveyor : DROITE - Electric transformer

Condition: used, Year of construction: 2000, max. working diameter 20 mm max. working lenght 320 mm passage of spindle 24 mm Spindle speed 200 - 10.000 min -1 control MITSUBISHI Hjdpfxsvnwfzs Afionu Turning Automatic Lathe - swiss lathe | CITIZEN - M-20 equipped with bar feeder. The machine is in very good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: M20 | M 20

Condition: used, TECHNICAL DETAILS - Number of axes : 2 MAIN SPINDLE - Spindle nose : A2-8" - Spindle power : 18.5 [kW] - Spindle speeds : 4000 [rpm] - Max. bar diameter : 76 [mm] - Max. turning diameter : 480 [mm] - Max. machining length : 760 [mm] - Max. diameter on bench : 780 [mm] TURRET - Number of positions : 12 - X/Z stroke : 260 x 830 [mm] - Rapid traverse rate : 30 [m/min] POWER SUPPLY - Supply voltage : 220 [V] - Total installed power : 40.72 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3.600 x 1.863 [mm] - Machine height : 1.900 [mm] - Machine weight : 5.500 [kg] Hodpfexcbtzjx Afijnu MACHINE HOURS - Number of working hours : 21.818 [h] EQUIPMENT - CNC : Fanuc i Series - Coolant tank - Chips conveyor : DROITE - Electric transformer

Condition: used, TECHNICAL DETAILS - Number of axes : 2 MAIN SPINDLE - Spindle nose : A2-8" - Spindle power : 18.5 [kW] - Spindle speeds : 4000 [rpm] - Max. bar diameter : 76 [mm] - Max. turning diameter : 480 [mm] - Max. machining length : 760 [mm] - Max. diameter on bench : 780 [mm] TURRET - Number of positions : 12 - X/Z stroke : 260 x 830 [mm] - Rapid traverse rate : 30 [m/min] POWER SUPPLY - Supply voltage : 220 [V] - Total installed power : 40.72 [kVA] Hnodpfx Afsxcbtuoiju WEIGHT & DIMENSIONS - Machine floor space : 3.600 x 1.863 [mm] - Machine height : 1.900 [mm] - Machine weight : 5.500 [kg] MACHINE HOURS - Number of working hours : 21.725 [h] EQUIPMENT - CNC : Fanuc i Series - Coolant tank - Chips conveyor : DROITE - Electric transformer