Used Makino for sale (36)

Condition: excellent (used), FANUC Professional 6 Control Lsdox A E Enspfx Ahvshd Working travels 900 x 900 x 1020 mm Tool changer with 136 Positions Spindle speeds -10'000 rpm Spindle taper HSK100 2 paletts 630 x 630 mm B-axis 0.001° Palett changer FASTEMS FPC1500 Cooling through spindle 3D measuring taper Tool breakage control device Tool lenght measuring device Chip conveyor Misc. accessories MARCELS MASCHINEN AG

Condition: excellent (used), FANUC 310 is-A Control Working travels 730 x 730 x 650 mm Tool changer with 60 Positions Spindle speeds 50-12'000 rpm Spindle taper HSK63 2 paletts 500 x 500 mm B-axis 0.001° Cooling through spindle 3D measuring taper Tool breakage control device Lodsx A E Ayspfx Ahvjhd Tool lenght measuring device Chip conveyor Misc. accessories MARCELS MASCHINEN AG

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 970 mm, table load: 1,200 kg, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel X-axis: 900 mm Travel Y-axis: 800 mm Travel Z-axis: 970 mm Spindle speed: 12,000 rpm Distance between spindle center and table top: 100 – 900 mm Distance between spindle head and pallet center: 70 – 1,040 mm Spindle taper: HSK 100 Table size: 630 x 630 mm Table load capacity: 1,200 kg Max. workpiece diameter: 1,000 mm Max. workpiece height: 1,300 mm Tool changer: 90 positions Minimum increment: 0.001 mm Creep feed: 1 – 4,000 mm/min (23 steps) Cutting feed: 1 – 50,000 mm/min Rapid traverse: 50,000 mm/min Pallet change time: 17 s MACHINE DETAILS Electrical data Operating voltage: 400 V, 3-phase, 50 Hz Total current: 98 A Incoming cable cross-section: 35 mm² Lodjxyiirjpfx Ahvohd Main fuse: 100 A Note: 2 trucks are required for transport.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 24,517 h, functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 650 mm, controller manufacturer: Fanuc, spindle speed (max.): 20,000 rpm, number of slots in tool magazine: 48, Bidding obligates the buyer to pick up the vehicle on time by May 30, 2025. Disassembly and loading available for an additional charge. Geometry report available! TECHNICAL DETAILS X-axis travel: 1,300 mm Y-axis travel: 800 mm Z-axis travel: 650 mm Control manufacturer: Fanuc Feed rate: 24,000 mm/min Clamping table Table dimensions: 1,550 x 800 mm Spindle-to-table distance: 250 - 900 mm Table load: max. 2.5 t Workpiece size: 1,550 x 800 x 550 mm Spindle Spindle speed range: 50 - 20,000 rpm Spindle power: 18.5 kW (S6) Torque: 95 Nm (S6) Tool holder: HSK63 Number of tool positions: 48 Coolant system External coolant pressure: 7 bar Internal coolant pressure: 40 bar Accuracy Positioning accuracy: ± 0.0025 mm Repeatability: ± 0.002 mm MACHINE DETAILS Width: 3,850 mm Ljdpfx Ajwgbx Uohvjhd Depth: 4,090 mm Height: 3,560 mm Machine weight: 16,000 kg On-time: 38,291 h Machining time: 20,068 h Program on-time: 24,725 h Spindle on-time: 24,517 h EQUIPMENT - Electric handwheel - Chip conveyor - Paper belt filter - Internal & external air supply - Marposs infrared sensor - Preparation for oil mist extraction - Blum tool measurement with laser - Work area flushing - Manual flushing gun - Coolant temperature control - Machine documentation - Geometry report A separate tool changer can be used for dismantling and loading. Service providers can be arranged. Price: approx. €8,000

Condition: ready for operation (used), Year of construction: 2012, operating hours: 21,109 h, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 500 mm, controller manufacturer: Fanuc, spindle speed (max.): 20,000 rpm, number of slots in tool magazine: 80, TECHNICAL DETAILS Travel X-axis travel: 550 mm Y-axis travel: 1,000 mm Z-axis travel: 500 mm Axes A-axis: +300° / -120° C-axis: 360° C-axis resolution: 0.0001° Clamping Table Table dimension: Ø 500 mm Table dimension with zero-point system: 356 mm x 356 mm Max. table load: 350 kg T-slots: 18H8 x 4 Workpiece size: 650 x 500 mm Spindle Spindle speed range: 50 – 20,000 rpm Spindle power: 18.5 kW (S6) Spindle torque: 95 Nm (S6) Tool holder: HSK63 Control Control manufacturer: Fanuc Automatic Tool Changer Tool holder: HSK63 Number of tool positions: 80 Indunorm Pallet Changer Pallet size 1 for automation: 6 pcs 398 mm x 398 mm Preset pallet for Erowa IST: 1 pc 398 mm x 398 mm Pallet size 2 for automation: 15 pcs Erowa ITS115 mm Pallet size 3 for automation: 32 pcs Erowa ITS50 mm Transfer weight incl. pallet: 300 kg Rapid Traverse Rapid traverse X-axis: 48 m/min Rapid traverse Y-axis: 50 m/min Rapid traverse Z-axis: 50 m/min Rapid traverse A/C-axis: 18,000°/min (equivalent to 50 rpm) Feed Rate Feed X-axis: 32 m/min Feed Y-axis: 40 m/min Feed Z-axis: 40 m/min Lhsdpsw Stpusfx Ahved Feed A/C-axis: 12,000°/min (equals 33.3 rpm at max. 500 kg) Feed A/C-axis: 18,000°/min (equals 50 rpm) MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,550 x 3,200 x 2,900 mm Machine weight: 16,000 kg Operating Hours (as of 30.04.2025) Power-on hours: 41,624 h Operating hours: 21,877 h Machining hours: 16,829 h Spindle hours: 21,109 h EQUIPMENT - Chip conveyor - Paper band filter - Bed flushing - Electronic handwheel - 6 Parotec pallets 398 mm x 398 mm - 1 Pre-pallet Parotec for Erowa ITS 398 mm x 398 mm - Extensive Fanuc control options - Machine documentation - Marposs infrared probe - Preparation for oil mist extraction - Blum laser tool measurement - Work area flushing - Hand rinsing gun - External coolant with 3 nozzles, 7 bar - Internal coolant 15 bar - Coolant temperature control - Internal & external air supply

Condition: used, Year of construction: 2005, Technical details: Ledpfx Ahjvc Adlovshd size of pallet: 400x400 mm numbers of pallets: 15 table load: 400 kg weight of the machine ca.: 0,060 t dimensions of the machine ca.: 0,4 x 0,4 m 15 pallets for Makino A 55, size 400 x 400 with T-slots for sale *

Year of construction: 2018, condition: used, We are selling a new unused but defective tool magazine with tool changer for a Makino PS 95. The magazine body was broken in two parts with a crane hook during unloading of the machine from its transport box. Lhjdpovfdvbjfx Ahvsd Also some tool pots are damaged. Can be repaired or used as spare parts *

Condition: good (used), Year of construction: 1998, CNC: FANUC 16MC + Professional 3 Pallet dimensions: 2 x 800 x 800 mm X/Y/Z axes: 1250 x 1050 x 810 mm Lhedpjt Up Ecjfx Ahvsd Spindle speed: 4 500 rpm EQUIPMENT: 2 pallets, dimensions 800 x 800 mm, NC indexing table 0.001°, B axis 120-place tool changer Swarf conveyor 30-bar high-pressure spindle coolant Renishaw probe

Condition: used, Year of construction: 1994, table length 750 mm Lodpfx Aovxwygehvehd table width 550 mm ampere 60 A Control Makino MGE20 x-travel 600 mm y-travel 400 mm z-travel 250 mm workpiece weight 450 kg tool change unit 8 weight of the machine ca. 5,00 t dimensions of the machine ca. 3,00 x 3,50 x H3,00 m Die-sinking machine with control MAKINO MGE20

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, workpiece weight (max.): 1,500 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 260 mm, total height: 2,350 mm, total length: 2,500 mm, total width: 2,300 mm, workpiece height (max.): 260 mm, workpiece width (max.): 650 mm, workpiece length (max.): 940 mm, overall weight: 6,000 kg, CNC wire cutting machine in very good condition. It has been thoroughly inspected by a Makino service technician. The machine has been cleaned, and all pumps have been checked, newly mounted, and sealed. Ledowww Nqopfx Ahvjhd

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: 80-4011-0011, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 950 mm, number of slots in tool magazine: 188, spindle speed (max.): 12,000 rpm, Spindle replacement in 2023! TECHNICAL DETAILS Control: FANUC Pro-3 X travel: 1,000 mm Y travel: 1,000 mm Z travel: 950 mm Feed rate X/Y/Z axes: 1 - 50,000 mm/min Rapid traverse X/Y/Z: 50.00 m/min B-axis: 360 x 0.001 ° Spindle and drive Tool holder: HSK-A 100 Speed: 20 - 12,000 rpm Spindle motor: 25 / 30 kW Milling spindle torque: 420 Nm Spindle diameter in front Storage: 110 mm Table and Workpiece Pallet size: 2 x 800 x 800 mm Maximum table load: 1,800 kg Workpiece size: 1,000 x 950 mm Workpiece height: 1,000 mm Tool magazine Number of slots: 188 Tool length: 475 mm Tool diameter: 320 mm Maximum tool weight: 20.00 kg MACHINE DETAILS Total power requirement: 65.00 kW Machine weight: 30.00 t Space required: 8.00 x 5.30 x 3.50 m Control system operating time: > 100,000 h Automatic time: 8,026 h Feed time: 31,905 h Part counter: 84,416 EQUIPMENT - Horizontal machining center with FANUC Professional 3 control - NC rotary table - Electronic handwheel Lhsdjv Sutkjpfx Ahvsd - Chip conveyor - KNOLL VRF450/2300 coolant filter - Through-spindle coolant - 188-station tool magazine