Used Machine Card for sale (64,832)

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 1 h, functionality: fully functional, machine/vehicle number: N2104796, GEM F470 Redsykugxopfx Aa Det automatic cardboard box sealer with automatic LATCH LOCKING FOR CONSTANT CARDBOARD FORMAT incl. centering unit and PLC S7 Siemens control system BOX DIMENSIONS: - Length : min. mm. 150 - max. mm .600 - Width : min. mm. 100 - max. mm. 520 - Height : min. mm. 100 - max. mm. 670 TECHNICAL DATA: - SPS Siemens S71200 control - Centering unit infeed RCC500 - Drive & guide belts Vertical - Carton format setting Manual - Bottom & lid sealing unit - Standard version T22 / T23 - Tape width From 50 to 50 mm depending on the unit - Tension adjustable - Max tape roll diameter 360mm - Core tape roll 76mm - Mains voltage 400V, 3F, N, PE - 50/60 Hertz - Consumption 0.25 kW - Degree of protection IP 54 - Working environment + 5° C - max. +35° C - Transport speed 22 mt/min. - Average production 1200 cartons/hour - Working height 650 mm - Weight 293 kg - Machine dimensions (L x W x H) mm. 2,470 x 990 x 1,782H - CE safety protection: side sheet metal covers with access door, supplemented with infeed doors L 850 mm, top and bottom cover. Illustration may contain options subject to surcharge

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 1 h, functionality: fully functional, machine/vehicle number: F2101146, F2000 AUTOMATIC CARTON ERECTOR CARTON DIMENSIONS: - Length: min. 220 mm - max. 600 mm - Width: min. 100 mm - max. 500 mm - Height: min. 100 mm - max. 500 mm TECHNICAL DATA: - PLC: Siemens S71200 control - Output: 840 cartons/min (depending on carton length and quality) - Carton magazine: 110 cartons - Operator panel: Digital HMI, Kite model 7’’ - Automatic start/stop via photocell - Venturi vacuum system: 25 m³/h, 700 mm Hg - Power supply: 400V, 3-phase, N, PE - 50/60 Hz - Protection class: IP 54 - Compressed air: 6 bar - Air consumption: 22 nl - Working environment: +5° C to max. +35° C - Working height: 650 mm, adjustable +30 mm - Weight: 490 kg - Machine dimensions: 1,535 x 2,125 x 2,105 mm (H) - CE safety protection The system includes a GEM B52 carton sealer. GEM B52 CARTON SEALER WITH SIDE DRIVE BELTS FOR CONSTANT CARTON FORMAT CARTON DIMENSIONS: - Length: min. 150 mm - max. ∞ - Width: min. 100 mm - max. 500 mm - Height: min. 100 mm - max. 500 mm TECHNICAL DATA: - Vertical drive & guide belts - Manual carton size adjustment - Bottom sealing unit Redpfxsykugrs Aa Det - Standard version T22 / T23 - Tape width: 38 to 50 mm depending on unit - Adjustable tape tension - Max. tape roll diameter: 360 mm - Tape roll core: 76 mm - Power supply: 400V, 3-phase, N, PE - 50/60 Hz - Power consumption: 0.25 kW - Protection class: IP 54 - Working environment: +5° C to max. +35° C - Conveyor speed: 22 m/min - Average output: 1,000 cartons/hour - Working height: 650 mm - Weight: 85 kg - Machine dimensions (L x W x H): 900 x 880 x 1,750 mm - CE safety protection: lateral sheet metal guards with access door, upper and lower covers (mandatory when combined with F1000/F2000/F2008) Figures may include optional equipment subject to surcharge.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, total height: 1,600 mm, input voltage: 380 V, total width: 900 mm, overall weight: 225 kg, Technical specifications: Power supply: Voltage: 380–415 V Rodpeyi Hzrofx Aa Dot Phase: 3-phase Frequency: 50 Hz Power: approx. 0.26 kW Current: 1.08 A Compressed air: Required: yes Operating pressure: approx. 6 bar Carton dimensions (adjustable) Minimum box size: Length: approx. 150 mm Width: approx. 120 mm Height: approx. 120 mm Maximum box size: Length: unlimited (depending on feed) Width: approx. 500 mm Height: approx. 650 mm (manually adjustable) Capacity / speed: Speed: approx. 20–25 boxes per minute (depending on box length and operator) Conveyor belt speed: approx. 22 m/min Tape: Tape width: 50 mm (optionally 75 mm with different tape head) Tape type: PP / PVC packaging tape

Condition: ready for operation (used), Year of construction: 2016, A fully automatic packaging system for jars with upstream carton erecting unit (wrap-around trays) including automatic product mixing of offline products is available. Example of mixed formats: 6-3-3/4-4-4/5-4-3/8-2-2/10-2, max. packaging capacity: 280 jars/min, max. carton erecting capacity: 2.3 cartons/min, mold changeover time: approx. 15min, overall system dimensions X/Y: approx. 16600mm/5800mm, weight of carton erector/packaging unit: approx. 1200kg/7500kg, operating hours: approx. 5000h. Documentation available. On-site inspection is possible. Expected to be available from mid/end of July 2025. Redpjwn H U Djfx Aa Dot

Condition: ready for operation (used), Year of construction: 2009, Packaging capacity: 100 cups/min, packaging schemes: 2x3x2/2x5x2, product formats X/Y/Z: 41mm/133mm/98mm, max. product tolerance: +/-1.5mm, infeed and outfeed height: 860mm/1060mm, infeed and outfeed adjustment: +/-50mm, operating hours: 64016h. Documentation available. On-site inspection is possible. Rjdpfxswqqv Rs Aa Dot

Condition: good (used), Die-cutting machine for cardboard, useful width 2500 mm. Can feed three different sizes of cardboard into the machine. Redpsyf D N Sefx Aa Djt

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 410798, type of input current: three-phase, The Kraft VPS100/1500 is a high-precision, fully automatic carton cutting machine designed for flexible and efficient production of shipping and protective packaging from continuous corrugated board – ideal for companies with a wide range of small batch series or on-demand production. Its patented multi-tool system allows for creasing, perforating, and cutting in a single pass, both longitudinally via the processing roller and transversely via the integrated cutting bar. 🎛 Processing & Tools 6× multifunction tools for longitudinal processing 1× multifunction tool for transversal processing Creases are applied gently using creasing skids – reduces carton cracking Perforation via oscillating cutting knife, intensity adjustable Cutting with a serrated knife on a rubberized roller → low-fiber, tactile cut edge ⚙ Drive & Mechanics Maintenance-free, high-dynamic linear drives for precise feed Segmented top pressure for reliable carton feed 2 rubberized rollers as counter-cut and transport medium 📐 Technical Specifications Max. working width: 1,500 mm Min. working length: 380 mm Board thickness: min. 1.5 mm (E-flute 1.3) max. 7.0 mm (BC-flute 2.7) Tool width: approx. 45 mm ➕ Carton Feed (Feed Stand) Max. stack height: 2,100 mm + 120 mm pallet Max. feed rate: 100 m/min Min. web width: 300 mm Max. web width (VPS 1500): 1,500 mm Total width "side by side": max. 1,350 mm 💻 Control & Software Hardware BECKHOFF industrial PC C6930 (Intel® Core™ i5-7500T, 2.7 GHz, 4 cores) 16 GB RAM, 240 GB SSD Windows 10 IoT Enterprise 21" multi-touch panel Control cabinet integrated into base machine Software features Multi-stage cut optimization Dynamic tool management Bidirectional multi-line processing Rodox Emgujpfx Aa Det User management (user, service, admin, Kraft) Comprehensive production, carton, and design management Message statistics, manufacturer documentation, training videos, service portal, etc. Documentation Operating manual in local language Circuit diagrams in German or English Spare parts drawings Other Equipment Standard interface for barcode scanner, file import (XML), database import Control panel mounted on swing arm, left side 🔄 Setup Times & Performance Changeover time with automatic carton changer: approx. 4.5 seconds Tool repositioning only: approx. 2.5 seconds The machine is delivered with multiple FEFCO formats and is production-ready immediately (e.g. 0201, 0331, 0403, 0410, 0412, 0421, 0401 incl. perforation) 🚚 Assembly, Transport & Year of Manufacture Demo and test machine year of manufacture 2019 Single-shift operation since 2022 Dismantling, packaging and delivery handled by seller Unloading requires 3.5-ton forklift with long forks 🎨 Colour Scheme Base machine: RAL 7015 (Slate Grey) & RAL 7035 (Light Grey) Safety fence: RAL 7015 Safety fence posts: RAL 7035 💡 Key Advantages of this Machine Very short setup times → ideal for flexible packaging production Low-fiber cut edges → reduced risk of injury & improved appearance Intuitive user interface Fully automatic, high-precision operation Immediately ready for use with included design templates Low-maintenance linear drives High process stability due to segmented top pressure

Condition: new, Cardan shaft balancing machine BVI-03-74 Available in stock in Poland !!! Delivery time: one day!!! . . Machine for driveshafts weighing up to 150kg and up to 4700mm long. Suitable for small workshops with a large range of different shafts, including trucks. This balancing machine has high productivity and serves to balance the cardan shafts of cars and trucks. It makes the process of balancing the cardan shaft easy thanks to many technical solutions, while the machine has an affordable price, which reduces your financial burden and allows you to develop your business effectively. . . TWO TIMES faster than your machine. Rsdpfxjpbv Tfe Aa Dot This balancing machine is majored to balance the shaft not only qualitatively, but also quickly. If you can balance in 2-2.5 times faster, then this is your real competitive advantage. . . HIGH PERFORMANCE ACCESSORIES The machine is equipped with three main types of adapters: 1. Fast clamping universal adapters. It has two main advantages: The first is that due to the special design the driveshaft flange is clamped within 5 seconds. This advantage is due to the fact that the driveshaft flange does not need to be fixed with bolts. THE SHAFT CAN BE CLAMPED 4 TIMES FASTER WITHOUT BOLTS. The second advantage is the centering rings. The driveshaft is mounted in the adapters with centering rings that can be made on an ordinary lathe to fit most common driveshafts. 2. KV Flange adapters. Used for balancing shafts with cross-tooth flanges. Applies to four flange sizes: 120, 150, 180, 205 mm. Usually used on truck driveshafts. 3. Adapter with slots. Used to mount various flanges with holes. Mounting the driveshaft is the same as on universal adapters, with the help of centering rings. KEY FEATURES • Balancing of 2, 3 and 4-support cardan shafts • Shaft length up to 4700mm, weight up to 150kg • Cardan installation in 1 minute • Standard set of adapters - Installation of 80% of cardan shafts; • Three ways of fixing the center bearing • Soft-bearing type machine - high sensitivity to any vibration • Machine is operated by one worker • Sliding bearing supports - quick changeover, comfortable operation • Safety bracket with clamp for quick installation • Measurement in all planes at one time • Calibration of the machine by the operator • Displays imbalance in real time • Create and print reports SPECIFICATIONS Maximum cardan shaft weight 150 kg Maximum flange diameter 300 mm Maximum length of cardan shaft 4700 mm Number of machine supports 4 Number of simultaneously measured planes 2, 3, 4 Minimum achievable residual specific imbalance, 10 g mm/kg Rotor speed range 1000-2000 rpm Power supply 380V, 3 Ph, 50Hz Power, minimum, 2,2 kW Dimensions (length x width x height) 6000 х 1100 х 1450 mm Weight 700 kg ! We manufacture а full range of equipment for drive shaft balancing and repair service. Please contact us to get the best offer!

Condition: excellent (used), Endoline Carton Erector Model 221 Rodpfx Aajv Tywws Djt With bottom taper Serial number: 051235542 415 V, 3 Ph, 50 Hz Dimensions carton erector: 1850 mm x 1850 mm x 2150 mm Including outfeed roller conveyor, roller width: 400 mm Dimensions roller conveyor: 1750 mm x 800 mm x 550 mm.

Condition: refurbished (used), Rovema SPA end packaging machine for wraparound for with long flaps and with short flaps Rodpfsx Ag Ukjx Aa Det

Condition: like new (used), Year of construction: 2017, Nordson Durablue 4F hotmelt glue unit suitable for up to 6 hose connections. This unit is equipped with a gear pump, unlike a (double-acting) plunger pump, this has no so-called dead stroke. Rjdpfx Aevupz Iea Dot This makes the unit very suitable for constant glue assignments where an even glue dosage is important. The glue unit has been completely cleaned internally and externally by us, tested and is fully functional.

Condition: used, Year of construction: 2001, functionality: fully functional, OLI CASE PACKER, MODEL OLI 210/OLIMAT 2P Small automatic case packer with small footprint. Built in 2001, with full documentation. Composed of 2 modules: OLI 210 (for products in feeding, staking and introduction) and OLIMAT 2P (for case-shaping, closing and out feeding). CHARACTERISTICS - PLC: TSX - Panel command : MAGELIS - Incoterm: EXW PRODUCTION - Max speed: 20 cases/mn (160 cartons/mn) - Cases format range: 100 x 60 x 100 mm (min); 500 x 340 x 400 mm (max) - Product entry height: 900 mm - Product exit height: 1100 mm DIMENSIONS - Size: 4700 x 1600 x 2000 mm (approximately) Rjdpfx Ajxzum Esa Dst ENERGY CONSUMPTION - Power: 5 KVA, 3 x 400 V/N/PE - Operating pressure: 6 bar

Condition: not inspected (used), Year of construction: 2014, machine/vehicle number: 12097, CNC Milling Machine XYZ SMX3500 The machine is in very well-maintained condition. Redpfxeyvi Eno Aa Djt ● Condition: Not inspected ● Delivery terms: Free on truck (FOT) ● Location: 42477 Radevormwald, Germany ● Availability: By arrangement – Collection date for the item is set for 06.05.2026. Unfortunately, collection outside of this timeframe cannot be accommodated. ● Payment terms: Advance payment by bank transfer ● Internal ID: DÄ10 ● Power-on demonstration possible: Yes Technical specifications: ● Control: PROTO TRAK SMX ● Table dimensions: 1200 x 300 mm ● Spindle speed: 5,000 rpm ● Main drive power: 3.75 kW ● 400 V ● 50 Hz Scope of delivery: ● Available manuals (completeness not guaranteed) ● Hoffmann vice, jaw width: 125 mm ● Machine lamp Dimensions & weights: ● Installation dimensions (L x W x H approx.): 2000 x 2000 x 2500 mm ● Weight approx.: 2,500 kg If you have any questions or would like to arrange an inspection, please feel free to contact us! Additional notes: ► On request, we can offer transport to the destination ► The quoted price is net, plus VAT ► The goods are sold under exclusion of any warranty ► Technical data provided without guarantee ► Subject to prior sale ❗Sale of the item is exclusively to businesses❗

Condition: new, functionality: fully functional, travel distance X-axis: 510 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, 📝 Description & Additional Technical Parameters Product Description: The VTX-5 is part of the Tongtai VTX Series of compact CNC vertical tapping / milling centers. It is designed to combine high speed, rigidity, and precision in a relatively small footprint. It uses a direct-drive spindle to improve tapping accuracy and reduce maintenance compared to belt-driven designs. Roller guideways (linear rails) are used to ensure smooth, rigid motion. Tool changing is relatively fast, and the structure is optimized for stability and precision under moderate loads. Technical Parameters: Table size: 600x400mm Strokes on X/Y/Z: 510/400/300mm Maxim loading capacity on the table: 250kgs Rapid traverse on X/Y/Z: 60/60/60 m/min Machine size (Width x Depth x Height): 1.700x2.600x2.700mm Machine weight: 2.850kgs Siemens controller model 828D with Shopmill and 10,4inch LCD Spindle speed 12.000 rpm direct driven Spindle motor 5,8kW Tool shank BBT-30 4th axis rotary table diameter 170mm and tailstock CTS ( coolant through spindle) 20bar Chip Conveyor chain type Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Rsdpfx Aasxni Iqe Djt Netherlands, Germany, Romania.

Condition: as good as new (ex-display), functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 830 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, workpiece height (max.): 1,000 mm, workpiece diameter (max.): 500 mm, workpiece weight (max.): 500 kg, 📄 Product Description The Tongtai SH-5000P is a high-speed, high-rigidity horizontal machining center designed for efficient machining of aluminum and light metal workpieces. It features a compact structure, three-point support bed, high rapid traverse speed, and optional APC (Automatic Pallet Changer). The built-in spindle provides high speed and precision, ideal for automotive and general manufacturing industries. ⚙️ Technical Parameters Strokes on X/Y/Z: 730/730/830mm B axis rotary table: 0,001º indexing table Rapid traverse on X/Y/Z: 60/60/60 m/min Acceleration (X/Y/Z): 9.8 m/s Spindle Speed: 15,000 rpm. Tool Capacity: 60 pieces (upgraded from standard 40). Chip-to-Chip Time: 3.6 s (at 1,800 rpm). Pallet Dimensions: 500 x 500 mm. Max. Workpiece Height: 1,000 mm. Max. Rotation Diameter: 500 mm. Max. Table Load: 500 kg. Automatic Pallet Changer (APC): Included, with a 7 s changeover time. Rjdpfsxnizdox Aa Dst Machine size (Width x Depth x Height): 5,840 x 2,290 x 2,892 mm Machine weight: 12,400 kg. CNC Control: Siemens Sinumerik 840 D with 15" Display and Shopmill interface Internal Cooling: CTS (Coolant Through Spindle) at 70 Bar. Peripheral Equipment: Includes a Disc-type Oil Skimmer and an Oil Mist Collector. Energy Efficiency: Equipped with energy-efficient drives. Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: good (used), GUK FA 49/4 Folding Machine + GUK FA 49/4 Cross Folding Module The machine is in very good technical and visual condition. Format: 490x690mm. Folding speed: 30-160m/min Equipment: Rodpfxoy Ehk Io Aa Djt 4 parallel cassettes on the main unit 4 perpendicular cassettes on the cross-folding unit First cassette extended. Cassette adjustments are dial-based. Smooth speed control. Counter with batching function and folding speed indicator. Rietschle compressor. Tool roller with a large number of perforating, creasing, and cutting tools. Raised sound insulation covers. Vacuum-assisted feeding Mobile delivery (free standing delivery) with smooth speed control Full documentation. Extensive set of accessories.

Condition: not inspected (used), functionality: unexamined, overall weight: 700 kg, total length: 2,200 mm, total width: 1,000 mm, total height: 1,600 mm, No reserve price – guaranteed sale to the highest bidder! Submitting a bid obligates timely collection between 23/06/2026 and 26/06/2026! Rsdpjy D S Unofx Aa Dot MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,200 x 1,000 x 1,600 mm Weight: 700 kg EQUIPMENT RNA Vibratory Feeder (diameter: approx. 800 mm) External reference: 33

Condition: not inspected (used), functionality: unexamined, overall weight: 700 kg, total length: 2,200 mm, total width: 1,000 mm, total height: 1,600 mm, No reserve price – guaranteed sale to the highest bidder! Rsdpfx Aoy D S S Hoa Djt Placing a bid obligates timely collection between 23/06/2026 and 26/06/2026! MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,200 x 1,000 x 1,600 mm Weight: 700 kg EQUIPMENT RNA vibratory feeder (diameter: 800 mm) External reference: 34

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 475 mm, table width: 450 mm, table length: 1,200 mm, table load: 400 kg, overall weight: 2,300 kg, We offer this used Abene Machine Ab VHF-360Ti milling machine, year of construction 2011. Serial number: 36120 Year of manufacture: 2011 Heidenhain TNC620-control Rodpfx Ajy Hgnhea Det Table size 1200 x 450 mm Max load 400 kg X-travel 650 mm, Y-travel 480 mm, Z-travel 475 mm Spindle BT40 Main motor 7,5 kW Weigth 2300 kg Excellent condition If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 1989, MAKE GER, MADE IN SPAIN MODEL RS 10/60 YEAR TABLE LENGTH 1300.0 mm TABLE WIDTH 600.0 mm TRAVEL X AXIS: 1600.0 mm Y AXIS: 600.0 mm MAX DISTANCE (TABLE TO WHEEL) 800.0 mm MAX WORKPIECIE WEIGHT 1000 KGS GRINDING WHEEL SIZE 400.0 x 100.0 x 127.0 mm Rjdpfx Aasy Du N Ue Dot SPINDLE SPEED MAX 1500 RPM MACHINE DIMENSIONS 4600.0 x 2700 x 2600.0 mm MACHINE WEIGHT 7600 KGS PLUS ELECTROMAGNETIC CHUCK SIZE: 1000.0 X 600.0MM HYDRAULIC PACK COOLANT SYSTEM WHEEL MOUNTED DRESSER

Year of construction: 2022, operating hours: 2,000 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 22015404-1, The blister packaging machine is in very good condition and is fully operational and functional. A test run of the machine and inspection of its operation are possible. The machine has been regularly maintained and serviced. Upon sale, all available additional spare parts and replacement components will be included. In addition to the blister packaging machine, the package also includes the following components that were additionally ordered alongside the basic machine. Camera inspection system for blister monitoring, a machine for secondary packaging of blisters SDZ-100, and a chiller for cooling the film from which the blisters are thermoformed. You can produce blister "0" 120x70x15 and blister "00" 120x70x30. All machines are supplied with the relevant technical documentation and CE certificates. All technical specifications, dimensions, the machine layout, as well as catalogs and instructions can be found in the attached PDF files. Rodeyuc Hzopfx Aa Det

Condition: ready for operation (used), functionality: fully functional, Very nice Wire-o punching machine. Electric with foot pedal, max format 710 mm. Punches up to 20 sheets of 80 gsm with square holes. You are of course welcome to test this machine with us. We can arrange transport/packaging for you and load it onto a truck or into a container. Rjdpfjymn Hwsx Aa Dst Please request a price including transport (location: Netherlands). Kind regards, Henk Hoos.

Condition: reconditioned (used), Kalmijer Cookie machine if you have further questions please send an message Rodpfekzi Ulox Aa Dot

Year of construction: 1995, condition: ready for operation (used), working width: 1,550 mm, inner diameter: 152 mm, rotational speed (distance/time): 13,000 mm/min, The machine cuts from roll to DIN A4 or A3 size sheets, stacking 100 sheets per box, as required in the office supplies market. The machine's output at 7-up across the 210 mm width is: in 1 hour: 250 A4 boxes filled with 100 sheets each. Possible materials: photo papers, inkjet films, OHP transparencies, self-printable business card cartons, PVC sheets for bookbinders as covers for brochures, matt-coated laser films for labeling, felts, and much more! Rodpjy Ed Hfefx Aa Djt The machine is still in daily operation, and can therefore be inspected and tested. We would handle dismantling, packing, and loading onto truck or into sea container at our cost... EXW.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: LCS300-4T, CNC machine Elcede, type LCS300-4T, year of manufacture 12/2001, 400/50 Hz, working area 305 x 152.5 cm, machine dimensions 545 x 280 x 233 cm (height), control cabinet 80 x 64.5 x 190 cm (height), PC cabinet 84 x 75 x 198 cm (height), 3x Dietz fans, + cooling unit KKT-krans KLB-S26T-RS, year of manufacture 2001, 400V, 144 x 90.5 x 161 cm (height), 50,640 operating hours, desk with Fukitsu desktop, password Defi123+, desk 170 x 75 x 78 cm (height), in operation. Rjdpey D Hwwefx Aa Dot